摘要
为了探究螺钉在斜面上的摆动情况,首先从能量角度、转动惯量角度和摆动条件角度进行理论分析,然后选取斜面倾角、螺钉倾角、斜面摩擦系数、螺钉的质量以及螺钉的长度等作为影响螺钉在斜面上摆动的主要因素进行探究,分别通过实验室实验、Solid works仿真、Tracker轨迹跟踪、Matlab拟合等方法,研究各个因素对螺钉摆动情况的影响。研究结果表明:在其变量一定的条件下,斜面倾角与螺钉摆动幅度呈正相关趋势;螺钉倾角增加或者斜面摩擦系数增大或者螺钉质量增大或者螺钉长度增大时,螺钉摆动幅度均呈现减小趋势,实验结果验证了理论分析的正确性。
The main objective of this paper is to investigate the oscillation behavior of a screw on an inclined plane.Firstly,theoretical analysis is conducted considering energy angle,moment of inertia,and swing conditions.Then,the key factors affecting the screw’s oscillation on the inclined plane are selected as bevel inclination,screw inclination,friction coefficient of the bevel surface,screw mass,and screw length.Through laboratory experiments and utilizing methods such as SolidWorks simulation,Tracker track tracking,Matlab fitting,etc,we studied the impact of these factors on the screw’s oscillation.The results demonstrate that when other variables are held constant,there is a positive correlation between the incline angle and the amplitude of swing for the screw.Additionally,as either the incline angle or friction coefficient increases or when there is an increase in either screw mass or length;it leads to a decrease in swing amplitude for the screw.The experimental findings validate our theoretical analysis.
作者
宋思盈
魏榕晟
张紫勃
周芸
SONG Siying;WEI Rongsheng;ZHANG Zibo;ZHOU Yun(School of Physics and Electronic Technology Liaoning Normal University,Dalian 116000,China)
出处
《大学物理实验》
2024年第5期7-12,共6页
Physical Experiment of College
基金
2023年国家自然科学基金面上项目(12275115)
2023年教育部产学合作协同育人项目(230805384251523)
2021年辽宁省普通高等教育本科教学改革研究项目一般项目(辽教办[2021]254号)。
关键词
螺钉
转动惯量
极加速度
仿真
screws
moment of inertia
polar acceleration
simulation
