摘要
对新疆某菱镁矿进行多元素及XRD衍射分析,该矿石主要成分为MgO,以碳酸镁的形式赋存与矿石中,脉石矿物主要以石英、白云石、方解石等为主的SiO_(2)、CaO类杂质,该矿石属工业四级品。针对该矿性质,本实验采用预先脱泥-反-正浮选的工艺流程,在磨矿细度为-74μm 79.8%,矿浆pH值为6、水玻璃用量为500 g/t,十八胺300 g/t的条件下进行反浮选,可得到精矿品位为44.21%,作业回收率为91.17%的粗精矿;粗精矿在浮选矿浆pH值为9、六偏磷酸纳150 g/t、2#油100 g/t,捕收剂YSM-091为1500 g/t的条件下进行浮选,得到精矿品位46.31%,作业回收率91.23%的镁精矿。在较佳条件下,进行闭路实验,最重可得到品位为46.12%的精矿产品,综合回收率为77.83%,其主要杂质SiO_(2)、CaO的含量分别为0.92%、0.81%„对比菱镁矿品级技术指标,该精矿产品达到了工业一级品的要求。
The multi-element and XRD diffraction analysis of a magnesite in Xinjiang shows that the main component of the ore is MgO,which exists in the form of magnesium carbonate,and the gangue minerals are quartz,dolomite,calcite,etc,which are considered as fourth industrial grade products.Pre-sludge-reverse-direct flotation of ore,reverse flotation under the conditions of grinding fineness of-74μm 79.8%,pulp pH=6,water glass dosage of 500 g/t,octadecylamine 300 g/t,The concentrate grade is 44.21%,the operating recovery rate is 91.17%of crude concentrate,and then the slurry pH=9,inhibitor 150 g/t,2#oil 100 g/t,collector YSM-091 is 1500 g/t,Under the conditions of flotation,the concentrate grade of magnesium is 46.31%and the recovery rate is 91.23%.Under the best conditions,a closed circuit test can be carried out to obtain a final concentrate product with a concentrate grade of 46.12%,with a comprehensive recovery rate of 77.83%,and the main impurities SiO_(2) and CaO have a grade of 0.92%and 0.81%,respectively.Compared with the technical indicators of magnesite grade,the concentrate product meets the first grade requirements in the industrial grade.
作者
胡生操
王晨晨
付金涛
黄朝德
Hu Shengcao;Wang Chenchen;Fu Jintao;Huang Chaode(Xitieshan Branch,Western Mineral Co.,Ltd.,Haixi,Qinghai,China;Daye Nonferrous Design&Research Institute Co.,Ltd.,Huangshi,Hubei,China)
出处
《矿产综合利用》
CAS
北大核心
2022年第2期69-73,共5页
Multipurpose Utilization of Mineral Resources
关键词
低品位
菱镁矿
工业品级
预先脱泥
反-正浮选
Low grade
Magnesite
Industrial grade
Reverse-positive flotation
Pre-sliming
