摘要
针对内圈产生单一局部缺陷的滚动轴承,在假设内圈不动的前提下,以弹性力学为基础,同时考虑缺陷宽度、深度以及载荷区等因素,根据滚动体通过缺陷时接触变形量的变化所引起的弹性接触力的变化,建立了动力学模型。通过数值仿真,证实了当内圈产生单一局部缺陷时,滚动轴承振动信号的低频成分为内圈的旋转频率、滚动体通过内圈的频率及其倍频以及由它们形成的边频这一在滚动轴承故障诊断中常用的结论。合理地解释了倍频产生的原因。实验结果与数值分析结果的对比表明所建模型能够有效地解释内圈局部缺陷轴承的振动特征。
On basis of the elastic mechanics and considering the influence of the width,depth of the local defect and load zone,and keeping the inner race stationary,the dynamic model of rolling element bearing with an inner race defect was constructed according to the change of the contact force between the rolling element and races caused by the variation of the contact deflection which took place when the rolling element passed the defect.Through the numerical simulation,it was verified that the frequency components of the vibration signal of the rolling element bearing with an inner race defect in low frequency region were the rotary frequency of the inner race,the frequency of the rolling element passing the defect and its multiple frequencies and side bands beside them caused by the rotary frequency of the inner race,which often was used in fault diagnosis of the rolling element bearing.The reason of occurrence of the multiple frequencies was explained reasonably.Compared the experimental result and numerical simulated result,it was showed the model can explained the vibration characteristics of rolling element bearing with an inner race default effectively.
出处
《机械科学与技术》
CSCD
北大核心
2012年第5期689-693,共5页
Mechanical Science and Technology for Aerospace Engineering
基金
国家自然科学基金项目(51175399)
陕西省自然科学基金项目(2011JM7009)资助
关键词
滚动轴承
内圈
单一局部故障
动力学分析
rolling element bearing
inner race
a single defect
dynamic analysis
