期刊文献+

基于模糊数学的TBM施工岩体质量分级研究 被引量:28

SURROUNDING ROCKMASS QUALITY CLASSIFICATION OF TUNNEL CUT BY TBM WITH FUZZY MATHEMATICS METHOD
在线阅读 下载PDF
导出
摘要 根据隧道掘进机(TBM)施工进度将围岩分为施工条件好、施工条件较好、施工条件较差和施工条件差4个等级。利用模糊数学方法,采用岩石单轴抗压强度UCS和岩体完整性指标KV,分别建立UCS和KV关于TBM施工岩体质量4级分级的隶属度函数。采用单极性S形函数,分别构建UCS和KV的权重函数。这样,基于模糊数学的最大隶属度准则,就可以对TBM施工的岩体质量进行分级。同时,给出3个施工实例,演算表明,预测的结果与TBM施工实际相吻合,表明该分级方法简单而实用,具有很好的应用前景。 According to tunnel boring machine(TBM) advance rate,surrounding rockmass is classified into 4 grades,i.e.good,comparatively good,comparatively bad and bad in working condition.Based on fuzzy mathematics method,two indices of uniaxial compressive strength UCS and rock mass integrity index KV are adopted;and their membership functions of the 4-grade classification of rock mass about TBM construction are established.Meanwhile,Sigmoid function is adopted to depict the weight of UCS and KV rather than a constant as QTBM and traditional fuzzy mathematics method.Based on the maximum membership degree criterion of fuzzy mathematics,the rockmass quality of TBM construction could be classified.Applications of three construction cases show that the prediction results coincide well with the TBM construction advance rate reality.The classification method is simple and feasible;and it can be put into practice.
出处 《岩石力学与工程学报》 EI CAS CSCD 北大核心 2011年第6期1225-1229,共5页 Chinese Journal of Rock Mechanics and Engineering
基金 国家重点基础研究发展计划(973)项目(2010CB732001) 中国科学院重要方向性项目(KZCX2-YW-109-2)
关键词 隧道工程 隧道掘进机(TBM) 围岩分级 模糊数学法 tunnelling engineering tunnel boring machine(TBM) surrounding rockmass classification fuzzy mathematics method
  • 相关文献

参考文献15

  • 1白郁宇,张瑞仁.TBM掘进速率预测模型的比较[J].现代隧道技术,2005,42(5):7-16. 被引量:4
  • 2王石春.隧道掘进机与地质因素关系综述[J].世界隧道,1998(2):39-43. 被引量:17
  • 3何发亮,谷明成,王石春.TBM施工隧道围岩分级方法研究[J].岩石力学与工程学报,2002,21(9):1350-1354. 被引量:96
  • 4龚秋明,赵坚,张喜虎.岩石隧道掘进机的施工预测模型[J].岩石力学与工程学报,2004,23(z2):4709-4714. 被引量:42
  • 5BARTON N.TBM performance estimation in rock using QTBM[J].Tunnels and Tunnelling International,1999,31(9):41-48.
  • 6BARTON N.TBM Tunneling in jointed and faulted rock[M].Netherlands:A.A.Balkema,2000:72-73.
  • 7BARTON N.Comments on a critique of QTBM[J].Tunnels and Tunnelling International,2005,37(9):16 19.
  • 8BARTON N,LIEN R,LUNDE J.Engineering classification of rock masses for the design of tunnel support[J].Rock Mechanics and Rock Engineering,1974,6(4):183-236.
  • 9SAPIGNI M,BERTI M,BETHAZ E,et al.TBM performance estimation using rock mass classifications[J].International Journal of Rock MechanicsandMiningSciences,2002,39(6):771-788.
  • 10BLINDHEIM O T.TBM performance prediction models[J].Tunnels and Tunnelling International,2004:23-27.

二级参考文献38

  • 1王石春,陈光宗,何发亮.中国铁路隧道工程地质的发展[J].铁道工程学报,1996,13(2):48-54. 被引量:11
  • 2隆威,尹俊涛,刘永正,吴煜宇.TBM掘进技术的发展应用及相关工程地质问题探讨[J].探矿工程(岩土钻掘工程),2005,32(2):55-59. 被引量:29
  • 3尤大鑫等 中国地质学会工程地质专业委员会.洞库爆破围岩分类.全国第三次工程地质大会论文选集[M].成都:成都科技大学出版社,1988.545-550.
  • 4张承娟 中国地质学会工程地质专业委员会.水电工程声波围岩分类指标的探讨.全国第三次工程地质大会论文选集[M].成都:成都科技大学出版社,1988.598-605.
  • 5[1]Graham P C. Rock Exploration for machine manufacturers, in exploration for rock engineering[A]. In: Bieniawski Z T ed. Proceedings of the Symposium[C]. Rotterdam: A. A. Balkema, 1976, 173~180
  • 6[2]Farmer I W, Glossop N H. Mechanics of disc cutter penetration[J].Tunnels and Tunnelling, 1980, 12:622~625
  • 7[3]Hughes H M. The relative cuttability of coal measures rock[J]. Mining Science and Technology, 1986, 3:95~109
  • 8[4]Nelson P P. Tunnel boring machine performance in sedimentary rock[Doctorate Dissertation][D]. USA: The Graduate School of Cornelll University, 1983
  • 9[5]O'Rourke J E, Spring J E, Coudray S V. Geotechnical parameters and tunnel boring machine performance at Goodwill Tunnel, California[A].In: Nelson, Laubach eds. Rock Mechanics Models and Measurements Challenges from Industry, Proc. of the 1st North American Rock Mechanics Symposium, The University of Texas at Austin[C].Rotterdam: A.A. Balkema, 1994
  • 10[6]Rostami J. Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure [Doctorate Dissertation][D]. Golden, Colorado, USA: Dept. of Mining Engineering, Colorado School of Mines, 1997

共引文献144

同被引文献386

引证文献28

二级引证文献280

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部