Structured illumination microscopy(SIM)is one of the most widely applied wide field super resolution imaging techniques with high temporal resolution and low phototoxicity.The spatial resolution of SIM is typically li...Structured illumination microscopy(SIM)is one of the most widely applied wide field super resolution imaging techniques with high temporal resolution and low phototoxicity.The spatial resolution of SIM is typically limited to two times of the diffraction limit and the depth of field is small.In this work,we propose and experimentally demonstrate a low cost,easy to implement,novel technique called speckle structured illumination endoscopy(SSIE)to enhance the resolution of a wide field endoscope with large depth of field.Here,speckle patterns are used to excite objects on the sample which is then followed by a blind-SIM algorithm for super resolution image reconstruction.Our approach is insensitive to the 3D morphology of the specimen,or the deformation of illuminations used.It greatly simplifies the experimental setup as there are no calibration protocols and no stringent control of illumination patterns nor focusing optics.We demonstrate that the SSIE can enhance the resolution 2–4.5 times that of a standard white light endoscopic(WLE)system.The SSIE presents a unique route to super resolution in endoscopic imaging at wide field of view and depth of field,which might be beneficial to the practice of clinical endoscopy.展开更多
The laser beam divergence angle is one of the important parameters to evaluate the quality of the laser beam.It can not only accurately indicate the nature of the beam divergence when the laser beam is transmitted ove...The laser beam divergence angle is one of the important parameters to evaluate the quality of the laser beam.It can not only accurately indicate the nature of the beam divergence when the laser beam is transmitted over a long distance,but also objectively evaluate the performance of the laser system.At present,lidar has received a lot of attention as a core component of environment awareness technology.Micro-electromechanical system(MEMS)micromirror has become the first choice for three-dimensional imaging lidar because of its small size and fast scanning speed.However,due to the small size of the MEMS micromirror,the lidar scanning system has a small field of view(FOV).In order to achieve a wide range of scanning imaging,collimating optical system and wide-angle optical system are generally added to the system.However,due to the inherent properties of the optical lens,it is impossible to perfect the imaging,so the effects of collimating and expanding the beam will be different at different angles.This article aims to propose a measurement system that dynamically measures the divergence angles of MEMS scanning lidar beams in different fields of view to objectively evaluate the performances of scanning lidar systems.展开更多
The high-altitude detection of astronomical radiation(HADAR)experiment is a new Cherenkov observation technique with a wide field of view(FoV),aimed at observing the prompt emissions ofγ-ray bursts(GRBs).The bottlene...The high-altitude detection of astronomical radiation(HADAR)experiment is a new Cherenkov observation technique with a wide field of view(FoV),aimed at observing the prompt emissions ofγ-ray bursts(GRBs).The bottleneck for this type of experiment can be found in determining how to reject the high rate of nightsky background(NSB)noise from random stars.In this work,we propose a novel method for rejecting noise,which considers the spatial properties of GRBs and the temporal characteristics of Cherenkov radiation.In space coordinates,the map between the celestial sphere and the fired photomultiplier tubes(PMTs)on the telescope's camera can be expressed as f(δ(i,j))=δ'(i',j'),which means that a limited number of PMTs is selected from one direction.On the temporal scale,a 20-ns time window was selected based on the knowledge of Cherenkov radiation.This allowed integration of the NSB for a short time interval.Consequently,the angular resolution and effective area at 100 GeV in the HADAR experiment were obtained as 0.2°and 10^(4)m^(2),respectively.This method can be applied to all wide-FoV experiments.展开更多
Needs in scintimammography applications,especially for small animal cardiac imaging,lead to develop a small field of view,high spatial resolution gamma camera with a pinhole collimator.However the ideal pinhole collim...Needs in scintimammography applications,especially for small animal cardiac imaging,lead to develop a small field of view,high spatial resolution gamma camera with a pinhole collimator.However the ideal pinhole collimator must keep a compromise between spatial resolution and sensitivity.In order to design a pinhole collimator with an optimized sensitivity and spatial resolution,the spatial resolution and the geometric sensitivity response as a function of the source to collimator distance has been obtained by means of Monte-Carlo simulation for a small field of view gamma camera with a pinhole collimator of various-hole diameters.The results show that the camera with pinhole of 1 mm,1.5 mm and 2 mm diameter has respectively spatial resolution of 1.5 mm,2.25 mm and 3 mm and geometric sensitivity of 0.016%,0.022%and 0.036%,while the source to collimator distance is 3 cm.We chose the pinhole collimator with hole diameter size of 1.2 mm for our the gamma camera designed based on the trade-off between sensitivity and resolution.展开更多
In many ultrafast imaging applications, the reduced field-of-view（r FOV） technique is often used to enhance the spatial resolution and field inhomogeneity immunity of the images. The stationary-phase characteristic ...In many ultrafast imaging applications, the reduced field-of-view（r FOV） technique is often used to enhance the spatial resolution and field inhomogeneity immunity of the images. The stationary-phase characteristic of the spatiotemporallyencoded（SPEN） method offers an inherent applicability to r FOV imaging. In this study, a flexible r FOV imaging method is presented and the superiority of the SPEN approach in r FOV imaging is demonstrated. The proposed method is validated with phantom and in vivo rat experiments, including cardiac imaging and contrast-enhanced perfusion imaging. For comparison, the echo planar imaging（EPI） experiments with orthogonal RF excitation are also performed. The results show that the signal-to-noise ratios of the images acquired by the proposed method can be higher than those obtained with the r FOV EPI. Moreover, the proposed method shows better performance in the cardiac imaging and perfusion imaging of rat kidney, and it can scan one or more regions of interest（ROIs） with high spatial resolution in a single shot. It might be a favorable solution to ultrafast imaging applications in cases with severe susceptibility heterogeneities, such as cardiac imaging and perfusion imaging. Furthermore, it might be promising in applications with separate ROIs, such as mammary and limb imaging.展开更多
This paper presents a method for structured scene modeling using micro stereo vision system with large field of view. The proposed algorithm includes edge detection with Canny detector, line fitting with principle axi...This paper presents a method for structured scene modeling using micro stereo vision system with large field of view. The proposed algorithm includes edge detection with Canny detector, line fitting with principle axis based approach, finding corresponding lines using feature based matching method, and 3D line depth computation.展开更多
Three-dimensional(3D)lidar has been widely used in various fields.The MEMS scanning system is one of its most important components,while the limitation of scanning angle is the main obstacle to improve the demerit for...Three-dimensional(3D)lidar has been widely used in various fields.The MEMS scanning system is one of its most important components,while the limitation of scanning angle is the main obstacle to improve the demerit for its application in various fields.In this paper,a folded large field of view scanning optical system is proposed.The structure and parameters of the system are determined by theoretical derivation of ray tracing.The optical design software Zemax is used to design the system.After optimization,the final structure performs well in collimation and beam expansion.The results show that the scan angle can be expanded from±5°to±26.5°,and finally the parallel light scanning is realized.The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm with a uniformly distributed spot.The maximum radius of the spot at 100 m is 19 cm,and the diffusion angle is less than 2 mrad.The energy concentration in the spot range is greater than 90%with a high system energy concentration,and the parallelism is good.This design overcomes the shortcoming of the small mechanical scanning angle of the MEMS lidar,and has good performance in collimation and beam expansion.It provides a design method for large-scale application of MEMS lidar.展开更多
Image quality in positron emission tomography(PET)is affected by random and scattered coincidences and reconstruction protocols.In this study,we investigated the effects of scattered and random coincidences from outsi...Image quality in positron emission tomography(PET)is affected by random and scattered coincidences and reconstruction protocols.In this study,we investigated the effects of scattered and random coincidences from outside the field of view(FOV)on PET image quality for different reconstruction protocols.Imaging was performed on the Discovery 690 PET/CT scanner,using experimental configurations including the NEMA phantom(a body phantom,with six spheres of different sizes)with a signal background ratio of 4:1.The NEMA phantom(phantom I)was scanned separately in a one-bed position.To simulate the effect of random and scatter coincidences from outside the FOV,six cylindrical phantoms with various diameters were added to the NEMA phantom(phantom II).The 18 emission datasets with mean intervals of 15 min were acquired(3 min/scan).The emission data were reconstructed using different techniques.The image quality parameters were evaluated by both phantoms.Variations in the signal-to-noise ratio(SNR)in a 28-mm(10-mm)sphere of phantom II were 37.9%(86.5%)for ordered-subset expectation maximization(OSEM-only),36.8%(81.5%)for point spread function(PSF),32.7%(80.7%)for time of flight(TOF),and 31.5%(77.8%)for OSEM+PSF+TOF,respectively,indicating that OSEM+PSF+TOF reconstruction had the lowest noise levels and lowest coefficient of variation(COV)values.Random and scatter coincidences from outside the FOV induced lower SNR,lower contrast,and higher COV values,indicating image deterioration and significantly impacting smaller sphere sizes.Amongst reconstruction protocols,OSEM+PSF+TOF and OSEM+PSF showed higher contrast values for sphere sizes of 22,28,and 37 mm and higher contrast recovery coefficient values for smaller sphere sizes of 10 and 13 mm.展开更多
For high precision calibration of camera with large field-of-view,massive calibration points will be needed if traditional methods are selected,which makes the calibration complex and time-consuming.In order to solve ...For high precision calibration of camera with large field-of-view,massive calibration points will be needed if traditional methods are selected,which makes the calibration complex and time-consuming.In order to solve this problem,a calibration method based on flexible planar target is proposed.In this method,distortion factor is firstly acquired by the invariance of cross ratio,and existing feature points are adjusted with the distortion factor.Then,a large number of points that will be used for the calibration are constructed with the adjusted feature points.Simultaneously,Tsai method is modified so as to reduce the complexity of calibration,which makes the process linear.The simulation and real experiments show that the method proposed in this paper is simple,linear,accurate and robust,and the precision of this method is close to that of Tsai method using abundant points.The method can satisfy the requirement of high precision calibration for camera with large field-of-view.展开更多
In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the ba...In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the background and twin- image interferences, which achieves a similar effect to off-axis holography but leaves out the large-aperture quasi-optical component. The translational scanning manner enables a large field of view and ensures the image uniformity, which is difficult to realize in off-axis holography. In addition, a corresponding imaging algorithm for the presented scheme is developed to reconstruct the image from the recorded hologram. Some imaging results on typical objects, obtained with electromagnetic simulation, demonstrate good performance of the imaging scheme and validate the effectiveness of the image reconstruction algorithm.展开更多
基金partially supported by the Gordon and Betty Moore Foundation Grant No.5722
文摘Structured illumination microscopy(SIM)is one of the most widely applied wide field super resolution imaging techniques with high temporal resolution and low phototoxicity.The spatial resolution of SIM is typically limited to two times of the diffraction limit and the depth of field is small.In this work,we propose and experimentally demonstrate a low cost,easy to implement,novel technique called speckle structured illumination endoscopy(SSIE)to enhance the resolution of a wide field endoscope with large depth of field.Here,speckle patterns are used to excite objects on the sample which is then followed by a blind-SIM algorithm for super resolution image reconstruction.Our approach is insensitive to the 3D morphology of the specimen,or the deformation of illuminations used.It greatly simplifies the experimental setup as there are no calibration protocols and no stringent control of illumination patterns nor focusing optics.We demonstrate that the SSIE can enhance the resolution 2–4.5 times that of a standard white light endoscopic(WLE)system.The SSIE presents a unique route to super resolution in endoscopic imaging at wide field of view and depth of field,which might be beneficial to the practice of clinical endoscopy.
基金Project supported by the National Key Scientific Instrument and Equipment Development Projects of China(Grant No.62027823)the Shenzhen Fundamental Research Program(Grant No.JCYJ2020109150808037)the National Natural Science Foundation of China(Grant No.61775048)。
文摘The laser beam divergence angle is one of the important parameters to evaluate the quality of the laser beam.It can not only accurately indicate the nature of the beam divergence when the laser beam is transmitted over a long distance,but also objectively evaluate the performance of the laser system.At present,lidar has received a lot of attention as a core component of environment awareness technology.Micro-electromechanical system(MEMS)micromirror has become the first choice for three-dimensional imaging lidar because of its small size and fast scanning speed.However,due to the small size of the MEMS micromirror,the lidar scanning system has a small field of view(FOV).In order to achieve a wide range of scanning imaging,collimating optical system and wide-angle optical system are generally added to the system.However,due to the inherent properties of the optical lens,it is impossible to perfect the imaging,so the effects of collimating and expanding the beam will be different at different angles.This article aims to propose a measurement system that dynamically measures the divergence angles of MEMS scanning lidar beams in different fields of view to objectively evaluate the performances of scanning lidar systems.
基金supported by the Key R&D Program of Sichuan Province (Nos. 2019ZYZF0001 and 2020YFSY0016)the National Natural Science Foundation of China (Nos. 11873005,12047575, 11705103, 11635011, U1831208, U1632104, 11875264U2031110)
文摘The high-altitude detection of astronomical radiation(HADAR)experiment is a new Cherenkov observation technique with a wide field of view(FoV),aimed at observing the prompt emissions ofγ-ray bursts(GRBs).The bottleneck for this type of experiment can be found in determining how to reject the high rate of nightsky background(NSB)noise from random stars.In this work,we propose a novel method for rejecting noise,which considers the spatial properties of GRBs and the temporal characteristics of Cherenkov radiation.In space coordinates,the map between the celestial sphere and the fired photomultiplier tubes(PMTs)on the telescope's camera can be expressed as f(δ(i,j))=δ'(i',j'),which means that a limited number of PMTs is selected from one direction.On the temporal scale,a 20-ns time window was selected based on the knowledge of Cherenkov radiation.This allowed integration of the NSB for a short time interval.Consequently,the angular resolution and effective area at 100 GeV in the HADAR experiment were obtained as 0.2°and 10^(4)m^(2),respectively.This method can be applied to all wide-FoV experiments.
基金Supported by National Foundation of Nature Science of China(No.10275063)
文摘Needs in scintimammography applications,especially for small animal cardiac imaging,lead to develop a small field of view,high spatial resolution gamma camera with a pinhole collimator.However the ideal pinhole collimator must keep a compromise between spatial resolution and sensitivity.In order to design a pinhole collimator with an optimized sensitivity and spatial resolution,the spatial resolution and the geometric sensitivity response as a function of the source to collimator distance has been obtained by means of Monte-Carlo simulation for a small field of view gamma camera with a pinhole collimator of various-hole diameters.The results show that the camera with pinhole of 1 mm,1.5 mm and 2 mm diameter has respectively spatial resolution of 1.5 mm,2.25 mm and 3 mm and geometric sensitivity of 0.016%,0.022%and 0.036%,while the source to collimator distance is 3 cm.We chose the pinhole collimator with hole diameter size of 1.2 mm for our the gamma camera designed based on the trade-off between sensitivity and resolution.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11474236,81171331,and U1232212)
文摘In many ultrafast imaging applications, the reduced field-of-view（r FOV） technique is often used to enhance the spatial resolution and field inhomogeneity immunity of the images. The stationary-phase characteristic of the spatiotemporallyencoded（SPEN） method offers an inherent applicability to r FOV imaging. In this study, a flexible r FOV imaging method is presented and the superiority of the SPEN approach in r FOV imaging is demonstrated. The proposed method is validated with phantom and in vivo rat experiments, including cardiac imaging and contrast-enhanced perfusion imaging. For comparison, the echo planar imaging（EPI） experiments with orthogonal RF excitation are also performed. The results show that the signal-to-noise ratios of the images acquired by the proposed method can be higher than those obtained with the r FOV EPI. Moreover, the proposed method shows better performance in the cardiac imaging and perfusion imaging of rat kidney, and it can scan one or more regions of interest（ROIs） with high spatial resolution in a single shot. It might be a favorable solution to ultrafast imaging applications in cases with severe susceptibility heterogeneities, such as cardiac imaging and perfusion imaging. Furthermore, it might be promising in applications with separate ROIs, such as mammary and limb imaging.
文摘This paper presents a method for structured scene modeling using micro stereo vision system with large field of view. The proposed algorithm includes edge detection with Canny detector, line fitting with principle axis based approach, finding corresponding lines using feature based matching method, and 3D line depth computation.
基金the Shenzhen Fundamental Research Program(Grant No.JCYJ2020109150808037)the National Key Scientific Instrument and Equipment Development Projects of China(Grant No.62027823)the National Natural Science Foundation of China(Grant No.61775048)。
文摘Three-dimensional(3D)lidar has been widely used in various fields.The MEMS scanning system is one of its most important components,while the limitation of scanning angle is the main obstacle to improve the demerit for its application in various fields.In this paper,a folded large field of view scanning optical system is proposed.The structure and parameters of the system are determined by theoretical derivation of ray tracing.The optical design software Zemax is used to design the system.After optimization,the final structure performs well in collimation and beam expansion.The results show that the scan angle can be expanded from±5°to±26.5°,and finally the parallel light scanning is realized.The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm with a uniformly distributed spot.The maximum radius of the spot at 100 m is 19 cm,and the diffusion angle is less than 2 mrad.The energy concentration in the spot range is greater than 90%with a high system energy concentration,and the parallelism is good.This design overcomes the shortcoming of the small mechanical scanning angle of the MEMS lidar,and has good performance in collimation and beam expansion.It provides a design method for large-scale application of MEMS lidar.
基金supported by the Tehran University of Medical Sciences under Grant No.36291PET/CT and Cyclotron Center of Masih Daneshvari Hospital at Shahid Beheshti University of Medical Sciences。
文摘Image quality in positron emission tomography(PET)is affected by random and scattered coincidences and reconstruction protocols.In this study,we investigated the effects of scattered and random coincidences from outside the field of view(FOV)on PET image quality for different reconstruction protocols.Imaging was performed on the Discovery 690 PET/CT scanner,using experimental configurations including the NEMA phantom(a body phantom,with six spheres of different sizes)with a signal background ratio of 4:1.The NEMA phantom(phantom I)was scanned separately in a one-bed position.To simulate the effect of random and scatter coincidences from outside the FOV,six cylindrical phantoms with various diameters were added to the NEMA phantom(phantom II).The 18 emission datasets with mean intervals of 15 min were acquired(3 min/scan).The emission data were reconstructed using different techniques.The image quality parameters were evaluated by both phantoms.Variations in the signal-to-noise ratio(SNR)in a 28-mm(10-mm)sphere of phantom II were 37.9%(86.5%)for ordered-subset expectation maximization(OSEM-only),36.8%(81.5%)for point spread function(PSF),32.7%(80.7%)for time of flight(TOF),and 31.5%(77.8%)for OSEM+PSF+TOF,respectively,indicating that OSEM+PSF+TOF reconstruction had the lowest noise levels and lowest coefficient of variation(COV)values.Random and scatter coincidences from outside the FOV induced lower SNR,lower contrast,and higher COV values,indicating image deterioration and significantly impacting smaller sphere sizes.Amongst reconstruction protocols,OSEM+PSF+TOF and OSEM+PSF showed higher contrast values for sphere sizes of 22,28,and 37 mm and higher contrast recovery coefficient values for smaller sphere sizes of 10 and 13 mm.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.2014019)
文摘For high precision calibration of camera with large field-of-view,massive calibration points will be needed if traditional methods are selected,which makes the calibration complex and time-consuming.In order to solve this problem,a calibration method based on flexible planar target is proposed.In this method,distortion factor is firstly acquired by the invariance of cross ratio,and existing feature points are adjusted with the distortion factor.Then,a large number of points that will be used for the calibration are constructed with the adjusted feature points.Simultaneously,Tsai method is modified so as to reduce the complexity of calibration,which makes the process linear.The simulation and real experiments show that the method proposed in this paper is simple,linear,accurate and robust,and the precision of this method is close to that of Tsai method using abundant points.The method can satisfy the requirement of high precision calibration for camera with large field-of-view.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.11174280,60990323,and 60990320)the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No.YYYJ-1123)
文摘In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the background and twin- image interferences, which achieves a similar effect to off-axis holography but leaves out the large-aperture quasi-optical component. The translational scanning manner enables a large field of view and ensures the image uniformity, which is difficult to realize in off-axis holography. In addition, a corresponding imaging algorithm for the presented scheme is developed to reconstruct the image from the recorded hologram. Some imaging results on typical objects, obtained with electromagnetic simulation, demonstrate good performance of the imaging scheme and validate the effectiveness of the image reconstruction algorithm.
