Sensing materials possessing intrinsic color perception are indispensable prerequisites for the development of filterless photosensors,which could eliminate the need for complex device designs and avoid color distorti...Sensing materials possessing intrinsic color perception are indispensable prerequisites for the development of filterless photosensors,which could eliminate the need for complex device designs and avoid color distortion in post-processing.Traditional materials are constrained by complex processing methods and limited stability.Herein,a color-photosensitive array based on ionic liquid with selective photothermal conversion(ILSPC)has been developed for intrinsic color perception.Relying on the selective absorption,photothermal conversion,and thermosensitivity of ILSPC,a photo-thermo-electric sensing system has been constructed.Besides,the versatility of the two algorithms has been validated in color reconstruction and electrical signal prediction.As an exploration,the photosensitive array showcases promising color recognition capabilities,potentially propelling the evolution of flexible photosensors.展开更多
This paper presents a fully integrated CMOS filterless class D amplifier that can directly hook up lithium battery in mobile application The proposed amplifier embodies a 2-order feedback path architecture instead of ...This paper presents a fully integrated CMOS filterless class D amplifier that can directly hook up lithium battery in mobile application The proposed amplifier embodies a 2-order feedback path architecture instead of direct feedback of output to input of the integrator to decrease the high frequency intermodulation distortion associated with direct feedback and eliminate the integrator input common mode disturbance from the output in ternary modulation. The prototype class D amplifier realized in 0.35 μm digital technology achieves a THD＋N of 0.02% when delivering 400 m W to an 8 Ω load from V_（DD） =3.6 V. The PSRR of the prototype class D amplifier is 80 dB at217 Hz. Furthermore a filterless method that can eliminate the external LC filter is employed which offers great advantages of saving PCB space and lowering system cost. In addition the prototype class D amplifier can operate in large voltage range with V_（DD）range from 2.5 to 4.2V in mobile application. The total area of the amplifier is 1.7mm^2.展开更多
A stereo 1.5bit delta-sigma digital-analog converter （△∑ DAC） integrated with a filterless class D power amplifier is introduced. It consumes no static power, and its maximum output power is 436mW with an 8Ω load...A stereo 1.5bit delta-sigma digital-analog converter （△∑ DAC） integrated with a filterless class D power amplifier is introduced. It consumes no static power, and its maximum output power is 436mW with an 8Ω load. Its output dynamic range exceeds 100dB. The circuit is implemented with a TSMC 0. 18μm process. The die area is 0. 28mme. The supply voltage is 1. gV for the digital part and 3.3V for class D.展开更多
针对无位置传感器内置式永磁同步电机(IPMSM)初始位置检测中,传统的基于凸极跟踪的短脉冲电压注入法难以确定脉冲宽度和幅值、实现困难、二次谐波分量法信噪比低的缺点,提出一种基于无滤波器方波信号注入的IPMSM初始位置检测方法。首先...针对无位置传感器内置式永磁同步电机(IPMSM)初始位置检测中,传统的基于凸极跟踪的短脉冲电压注入法难以确定脉冲宽度和幅值、实现困难、二次谐波分量法信噪比低的缺点,提出一种基于无滤波器方波信号注入的IPMSM初始位置检测方法。首先通过向观测的转子d轴注入高频方波电压信号,采用无滤波器载波信号分离方法解耦位置误差信息,通过位置跟踪器获取磁极位置初定值;然后基于磁饱和效应,通过施加方向相反的d轴电流偏置给定,比较d轴高频电流响应幅值大小实现磁极极性辨识;最后,通过2.2k W IPMSM矢量控制系统对提出的基于无滤波器方波信号注入的初始位置检测方法进行实验验证。结果表明,所提方法收敛速度较快,可在IPMSM转子静止或自由运行状态实现初始位置辨识和低速可靠运行,位置观测误差最大值为6.9°。展开更多
基金supported by the Beijing Natural Science Foundation,China(No.2242037)and the National Natural Science Foundation of China(No.22005336).
文摘Sensing materials possessing intrinsic color perception are indispensable prerequisites for the development of filterless photosensors,which could eliminate the need for complex device designs and avoid color distortion in post-processing.Traditional materials are constrained by complex processing methods and limited stability.Herein,a color-photosensitive array based on ionic liquid with selective photothermal conversion(ILSPC)has been developed for intrinsic color perception.Relying on the selective absorption,photothermal conversion,and thermosensitivity of ILSPC,a photo-thermo-electric sensing system has been constructed.Besides,the versatility of the two algorithms has been validated in color reconstruction and electrical signal prediction.As an exploration,the photosensitive array showcases promising color recognition capabilities,potentially propelling the evolution of flexible photosensors.
基金supported by the National Natural Science Foundation of China(Nos.61234002,61322405,61306044)
文摘This paper presents a fully integrated CMOS filterless class D amplifier that can directly hook up lithium battery in mobile application The proposed amplifier embodies a 2-order feedback path architecture instead of direct feedback of output to input of the integrator to decrease the high frequency intermodulation distortion associated with direct feedback and eliminate the integrator input common mode disturbance from the output in ternary modulation. The prototype class D amplifier realized in 0.35 μm digital technology achieves a THD＋N of 0.02% when delivering 400 m W to an 8 Ω load from V_（DD） =3.6 V. The PSRR of the prototype class D amplifier is 80 dB at217 Hz. Furthermore a filterless method that can eliminate the external LC filter is employed which offers great advantages of saving PCB space and lowering system cost. In addition the prototype class D amplifier can operate in large voltage range with V_（DD）range from 2.5 to 4.2V in mobile application. The total area of the amplifier is 1.7mm^2.
文摘A stereo 1.5bit delta-sigma digital-analog converter （△∑ DAC） integrated with a filterless class D power amplifier is introduced. It consumes no static power, and its maximum output power is 436mW with an 8Ω load. Its output dynamic range exceeds 100dB. The circuit is implemented with a TSMC 0. 18μm process. The die area is 0. 28mme. The supply voltage is 1. gV for the digital part and 3.3V for class D.
文摘针对无位置传感器内置式永磁同步电机(IPMSM)初始位置检测中,传统的基于凸极跟踪的短脉冲电压注入法难以确定脉冲宽度和幅值、实现困难、二次谐波分量法信噪比低的缺点,提出一种基于无滤波器方波信号注入的IPMSM初始位置检测方法。首先通过向观测的转子d轴注入高频方波电压信号,采用无滤波器载波信号分离方法解耦位置误差信息,通过位置跟踪器获取磁极位置初定值;然后基于磁饱和效应,通过施加方向相反的d轴电流偏置给定,比较d轴高频电流响应幅值大小实现磁极极性辨识;最后,通过2.2k W IPMSM矢量控制系统对提出的基于无滤波器方波信号注入的初始位置检测方法进行实验验证。结果表明,所提方法收敛速度较快,可在IPMSM转子静止或自由运行状态实现初始位置辨识和低速可靠运行,位置观测误差最大值为6.9°。
