In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques includin...In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques including powder X-ray diffraction（XRD）, N2 adsorption/desorption, inductively coupled plasma（ICP） and transmission electron microscopy（TEM）. The Fe-based catalysts exhibited consecutive phase changes of amorphous Fe Ox→FeLaO3→Fe2N under different stages（as-prepared→calcination→ammonia decomposition reaction）; as for Co-based catalysts, the phase transformation followed a sequence of Co（OH）2→Co3O4→metallic Co. It was revealed that Fe2N and metallic Co were most probably the active crystalline phase respectively for Feand Co-based catalysts in the decomposition of ammonia.展开更多
The changes of the valence state of lanthanum in the Mo La 2O 3 model cathode specimens were systematically studied by in situ XPS/AES analyses from room temperature to 1550 ℃. The experimental results show that ...The changes of the valence state of lanthanum in the Mo La 2O 3 model cathode specimens were systematically studied by in situ XPS/AES analyses from room temperature to 1550 ℃. The experimental results show that the valence of lanthanum changes during the activation processes. As the temperature increases, the lattice oxygen in La 2O 3 is dissociated, resulting in partial reduction of the lanthanum to LaO x(x <3/2). In addition, the lanthanum rich phase diffuses from bulk into the surface of the sample. The lack of lattice oxygen in this phase has a favorable effect on emission, which leads to a lower work function for the Mo La 2O 3 cathode.展开更多
The preparation of nano sized La 2O 3 powder by mechanochemical reaction of lanthanum carbonate with sodium hydroxide and subsequent heat treatment was studied using X ray diffraction, differential thermal and ther...The preparation of nano sized La 2O 3 powder by mechanochemical reaction of lanthanum carbonate with sodium hydroxide and subsequent heat treatment was studied using X ray diffraction, differential thermal and thermo gravimetric analysis and transmission electron microscopy. It was found that the mechanochemical reaction process can be divided into two steps: the first step is the multi phases mechanochemical reaction of lanthanum carbonate with NaOH to form amorphous lanthanum basic carbonate and lanthanum hydroxide, and the second step is the crystallization of basic lanthanum carbonate with the formula of La 2(OH) 2(CO 3) 2·H 2O under a quasi hydrothermal synthesis condition caused by the mechanical ball milling. The synthesized La 2O 3 powder appears clearly separated spherical like monodisperse nano size particles in which particle size ranges from 30 to 50 nm.展开更多
Hydrogen was produced over noble metal（Ir, Ru, Rh, Pd） catalysts supported on various oxides, including γ-Al2O3, CeO2, ZrO2 and La2O3, via the autothermal reforming reaction of ethanol （ATRE） and oxidative reform...Hydrogen was produced over noble metal（Ir, Ru, Rh, Pd） catalysts supported on various oxides, including γ-Al2O3, CeO2, ZrO2 and La2O3, via the autothermal reforming reaction of ethanol （ATRE） and oxidative reforming reaction of ethanol （OSRE）. The conversion of ethanol and selectivites for hydrogen and byproducts such as methane, ethylene and acetaldehyde were studied. It was found that lanthana alone possessed considerable activity for the ATRE reaction, which could be used as a functional support for ATRE catalysts. It was demonstrated that Ir/La2O3 prevented the formation of methane, and Rh/La2O3 encumbered the production of ethylene and acetaldehyde. ATRE reaction was carried out over La2O3-supported catalysts （Ir/La2O3） with good stability on stream, high conversion, and excellent hydrogen selectivity approaching thermodynamic limit under autothermal condition. Typically, 3.4H2 molecules can be extracted from a pair of ethanol and water molecules over Ir（5wt%）/La2O3. The results presented in this paper indicate that Ir/La2O3 can be used as a promising catalyst for hydrogen production via ATRE reaction from renewable ethanol.展开更多
A new process for electrolytic production of a perfluorinated compound, （CF3）3N, using lanthanum nickel oxide-coated Ni sheet anode in the （CH3）4NF· 4.0HF melt at room temperature, was developed. Thin films o...A new process for electrolytic production of a perfluorinated compound, （CF3）3N, using lanthanum nickel oxide-coated Ni sheet anode in the （CH3）4NF· 4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone（PVP）. The main components of the thin films were La2O3, LaNiO3, and La2NiO4 at 500, 750 and 1000℃, respectively. The anode performance in the （CH3）4NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO3-coated Ni sheet anode gives the best anode performance. The potential of LaNiO3-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm^-2 in the （CH3）4NF·4.0HF melt for 100 h. This is because LaNiO3 and NiF3 and/or Ni2F5, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of （CF3）3N （21.4%） was obtained at 20 mA·cm^-2 in （CH3）4NF·4.0HF melt using the LaNiO3-coated Ni sheet.展开更多
A new method for the determination of trace non-rare earth elements (NREEs) impurities in high-purity lanthanum oxide by HPLC combined with ICP-AES is proposed. The chromatographic retention behaviors of matrix (La) a...A new method for the determination of trace non-rare earth elements (NREEs) impurities in high-purity lanthanum oxide by HPLC combined with ICP-AES is proposed. The chromatographic retention behaviors of matrix (La) and NREEs were studied using 2-ethylhexyl hydrogen 2-ethylhexyl phosphonate (P507) chelating resin as the stationary phase and dilute nitric acid as the mobile phase. It is found that the use of pH 1.7 nitric acid enables effective elution of NREEs from HPLC column, but the lanthanum remains on the column. The experimental results show that a favorable separation between matrix lanthanum and NREEs can be obtained within 15 min. The method proposed is applied to the determination of 8 NREEs impurities in high-purity La2O3. The recoveries of 8 NREEs are in the range of 90 % similar to 110 %.展开更多
A new method for determination of trace silicon in high purity lanthanum oxide by using electrothermal vaporization (ETV) ICP AES with polytetrafluoroethylene(PTFE) slurry as a fluorinating reagent has been proposed...A new method for determination of trace silicon in high purity lanthanum oxide by using electrothermal vaporization (ETV) ICP AES with polytetrafluoroethylene(PTFE) slurry as a fluorinating reagent has been proposed. Under the optimized experimental conditions, the fluorination reactions of analyte(Si) and matrix(La) with PTFE in the graphite furnace took place at high temperature, and the fractional volatilily between Si and La was observed. Based on this principle the matrix interference could be eliminated. The detection limit of Si was 4.0 μg·L -1 , and the RSD was 3.4%( C =0.2 mg·L -1 , n =10). The procedure proposed has been applied successfully to determine trace Si in La 2O 3 without any chemical pre treatment.展开更多
Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investig...Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.展开更多
In situ activation process of Mo-La2O3 prototype cathode at high temperature was systematically investigated by XPS/AES. The oxygen species produced during the process were characterized at different temperatures. The...In situ activation process of Mo-La2O3 prototype cathode at high temperature was systematically investigated by XPS/AES. The oxygen species produced during the process were characterized at different temperatures. The results show that there exist two kinds of oxygen ions at above 1300 ℃, the lattice oxygen with lower binding energy(Eb=530.00 eV) should be dissociated from the lattice oxygen of La2O3. It may be concluded that La2O3 was partly reduced to LaOx(x<3/2) due to the dissociation of lattice oxygen. And the oxygen may play a favorable or an unfavorable role in emission depending upon its relative quantity and position in the surface layer.展开更多
Modification of ZL107 aluminum alloy has been successfully achieved by using La2O3. The different casting parameters, including casting temperature as well as holding time and modifier content, were carried out to inv...Modification of ZL107 aluminum alloy has been successfully achieved by using La2O3. The different casting parameters, including casting temperature as well as holding time and modifier content, were carried out to investigate the modification effects. The results show that the best modifier content is 1.0 wt.%, and the casting temperature has little effect. In addition, the wear behavior of modified and unmodified ZL 107 has been compared. The wear resistance of as-cast ZL 107 aluminum alloy can be significantly improved after modification.展开更多
Density‐functional theory calculations were carried out to study the strontium(Sr)‐doping effect on methane activation over a lanthanum‐oxide(La2O3)catalyst for the oxidative coupling of methane(OCM)using the clust...Density‐functional theory calculations were carried out to study the strontium(Sr)‐doping effect on methane activation over a lanthanum‐oxide(La2O3)catalyst for the oxidative coupling of methane(OCM)using the cluster model.Eight Sr‐doped La2O3cluster models were built from pure La2O3clusters that were used previously to model the La2O3catalyst.These form two distinct categories,namely,those without a radical character(LaSrO2(OH),La2SrO4,La3SrO5(OH),and La5SrO8(OH))and those with a radical character(LaSrO3,La2SrO4(OH),La3SrO6,and La5SrO9).The potential‐energy surface for CH4activation to form a CH3radical at different Sr-O and La-O pair sites on these Sr‐doped La2O3clusters was calculated to study the Sr‐doping effect on the OCM catalytic activity.CH4physisorption and chemisorption energies,and activation barriers,and CH3desorption energies were predicted.Compared with the pure La2O3clusters,in general,the Sr‐doped La2O3clusters are thermodynamically and kinetically more reactive with CH4.For the Sr‐doped La2O3clusters without the radical character,the Sr-O pair site is more reactive with CH4than the La-O pair site,although a direct release of the CH3radical is also highly endothermic as in the case of the pure La2O3clusters.In contrast,for the Sr‐doped La2O3clusters with a radical character,the activation of CH4at the oxygen radical site and the release of the CH3radical are much easier.Thus,our calculations suggest that the Sr dopant prompts the OCM catalytic activity of the La2O3catalyst by providing a highly active oxygen‐radical site and by strengthening the basicity of the M-O pair site,which leads to lower CH4activation energies and lower CH3desorption energies.展开更多
Lead-free piezoelectric ceramics of (Bi1/2Na1/2)TiO3-BaTiO3(BNT-BT) were prepared by the conventional piezoelectric ceramic preparation technique (free air atmosphere sintering). The influence of BaTiO3 additive amoun...Lead-free piezoelectric ceramics of (Bi1/2Na1/2)TiO3-BaTiO3(BNT-BT) were prepared by the conventional piezoelectric ceramic preparation technique (free air atmosphere sintering). The influence of BaTiO3 additive amount and La2O3 additive amount on the properties of BNT-BT lead-free piezoceramics were investigated. The results show that the dielectric constant(ε) and piezoelectric strain constant(d33) of materials start increasing and then decreasing while BaTiO3 additive amount increasing, the e and d33 of materials have maximum value (ε= 1650, d33 = 120 PC·N -1 ) while x (BaTiO3) =0.06 mol. Theεand d33 of materials start increasing and then decreasing while La2O3 additive amount increasing, the e and d33 of materials have maximum value (ε= 1684, d33 = 153 PC·N-1) while w(La2O3) =0.3% . The influence of La2O3 additive amount on the microstructure of BNT-BT piezoelectric ceramics was analysed by SEM( scanning electron microscope). The influence mechanism of La2O3 additive amount on the properties of BNT-BT piezoelectric ceramics was discussed. The BNT-BT ceramics with optimum comprehensive properties were obtained.展开更多
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s...Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.展开更多
The high temperature chemical reaction process of La2O3 in H3BO3-C system was studied by means of XRD and TG-DTA.The results showed that dehydration reaction of H3BO3 occurred in the temperature range of 82～390 ℃;La...The high temperature chemical reaction process of La2O3 in H3BO3-C system was studied by means of XRD and TG-DTA.The results showed that dehydration reaction of H3BO3 occurred in the temperature range of 82～390 ℃;La2O3 and B2O3 reacted to form LaB3O6,LaBO3,and B4C in the temperature range of 836～1400℃;at 1450 ℃,B4C and LaBO3 further reacted to form LaB4,and partial LaB4 and B reacted to form LaB6;at 1500 ℃,LaB4 and B reacting into LaB6 was the main reaction,and the content of LaB6 increased with prolonging time.展开更多
Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared sa...Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.展开更多
The thermal decomposition process of air-aged La203 in argon atmosphere was studied using nonisothermal TG-DSC. X-ray diffraction and TG-DSC analysis showed that the aged powder was composed of La（OH）3 with small am...The thermal decomposition process of air-aged La203 in argon atmosphere was studied using nonisothermal TG-DSC. X-ray diffraction and TG-DSC analysis showed that the aged powder was composed of La（OH）3 with small amounts of oxycarbonate. The decomposition process of air-aged La2O3 involves the two-step decomposition of La（OH）3 and the decomposition of oxycarbonate. The kinetic analysis of the two-step decomposition of La（OH）3 was carried out using Coats-Redfern and isoconversion （Ozawa） methods. The kinetics of the two-step decomposition can be described in terms of the nucleation and growth model A （m=1.5, m is the model parameter） and A （m=2.5）, respectively. The apparent activation energy for the first step is 136-144 （Coats-Redfern） and 137-164 kJ/mol （isoconversion）. The apparent activation energy for the second step is 191-194 （Coats-Redfern） and 186-213 kJ/mol （isoconversion）.展开更多
Light burned magnesia powders with different particle sizes were obtained by calcining crystalline magnesite.Sintered magnesia was prepared from the light burned magnesia powders by adding different amounts of La2O3.T...Light burned magnesia powders with different particle sizes were obtained by calcining crystalline magnesite.Sintered magnesia was prepared from the light burned magnesia powders by adding different amounts of La2O3.The effect of the La2O3 addition on the densification of magnesia was studied.The results show that the densification of sintered magnesia can be promoted both by reducing the particle size of the light burned powder and by adding small amounts of La2O3.The effect of the La2O3 addition is more significant:the maximum bulk density of the sintered magnesia can reach 3.49 g·cm-3 and the apparent porosity can be reduced to 0.33%.During sintering,Ca2+from the impurities enters La2O3 lattices,causing lattice distortion of La2O3 thus promoting the formation of La4.67(SiO4)3O phase and CaLa4(SiO4)3O phase,which fill the pores between the MgO grains and promote the densification of sintered magnesia.展开更多
We report on the performance of La203/InA1N/GaN metal-oxide-semiconductor high electron mobility transistors （MOSHEMTs） and InA1N/GaN high electron mobility transistors （HEMTs）. The MOSHEMT presents a maximum drai...We report on the performance of La203/InA1N/GaN metal-oxide-semiconductor high electron mobility transistors （MOSHEMTs） and InA1N/GaN high electron mobility transistors （HEMTs）. The MOSHEMT presents a maximum drain current of 961 mA/mm at Vgs = 4 V and a maximum transconductance of 130 mS/mm compared with 710 mA/mm at Vgs = 1 V and 131 mS/mm for the HEMT device, while the gate leakage current in the reverse direction could be reduced by four orders of magnitude. Compared with the HEMT device of a similar geometry, MOSHEMT presents a large gate voltage swing and negligible current collapse.展开更多
Kinetics of carbothermic reduction of manganese oxide and the catalyticeffect of La_2O_3 on the reduction have been studied by the measurement of mass loss in N_2atmosphere at different temperatures and followed by SE...Kinetics of carbothermic reduction of manganese oxide and the catalyticeffect of La_2O_3 on the reduction have been studied by the measurement of mass loss in N_2atmosphere at different temperatures and followed by SEM analysis. It is concluded that the kineticsof carbothermic reduction of manganese oxide is divided into three stages: gas diffusioncontrolling stage, carbon gasification con-trolling stage and solid state diffusion controllingstage. La_2O_3 has catalytic effect on the reduction. The catalytic effect of La_2O_3 increases withthe added amount of La_2O_3. SEM analysis shows that the catalytic mechanism is that La_2O_3promotes the transfer of oxygen ions so that carbon gasifying is catalyzed and thus carbothermicreduction of MnO_2 is catalyzed.展开更多
In order to explore new application opportunities of Barium Strontium Titanate (BST) ceramic composite by modifying the conventional ferroelectric properties of BST through La<sub>2</sub>O<sub>3</...In order to explore new application opportunities of Barium Strontium Titanate (BST) ceramic composite by modifying the conventional ferroelectric properties of BST through La<sub>2</sub>O<sub>3</sub> doping in BST matrix sintered at different temperature was investigated in this current study. Unadulterated Ba<sub>0.3</sub>Sr<sub>0.7</sub>TiO<sub>3</sub> (BST) matrix was prepared from BaTiO<sub>3</sub> (99.95%) and SrTiO<sub>3</sub> (99.95%) taken in stoichiometric extents which later doped by La<sub>2</sub>O<sub>3</sub> (99.99%) in varying extents (0.05 g, 0.10 g and 0.15 g) exploiting solid state reaction route. Doping caused drag effect for the penetration of impurities and sintering temperature helped the impurities migration to BST. Dielectric constant gets lower with rising of frequency, as electrons do not get enough time to polarize at high frequency. Dielectric constant and conductance are found maximum for the sample (0.1 g La<sub>2</sub>O<sub>3</sub> doped BST) sintered at 1460<span style="white-space:nowrap;">°</span>C and reverse is found in impedance analysis. These electrical properties showed visible frequency dependent response irrespective of sintering temperature and doping.展开更多
基金Project supported by the National Natural Science Foundation of China(21301107,21501109)Fundamental Research Funding of Shandong University(2014JC005)+1 种基金the Taishan Scholar Project of Shandong Province(China)Doctoral Funding of Ministry of Education of China(20130131120009)
文摘In this paper, a series of Fe- and Co-doped lanthanum（hydr）oxides catalysts were prepared by a simple coprecipitationhydrothermal method. The as-prepared catalysts were characterized with various techniques including powder X-ray diffraction（XRD）, N2 adsorption/desorption, inductively coupled plasma（ICP） and transmission electron microscopy（TEM）. The Fe-based catalysts exhibited consecutive phase changes of amorphous Fe Ox→FeLaO3→Fe2N under different stages（as-prepared→calcination→ammonia decomposition reaction）; as for Co-based catalysts, the phase transformation followed a sequence of Co（OH）2→Co3O4→metallic Co. It was revealed that Fe2N and metallic Co were most probably the active crystalline phase respectively for Feand Co-based catalysts in the decomposition of ammonia.
文摘The changes of the valence state of lanthanum in the Mo La 2O 3 model cathode specimens were systematically studied by in situ XPS/AES analyses from room temperature to 1550 ℃. The experimental results show that the valence of lanthanum changes during the activation processes. As the temperature increases, the lattice oxygen in La 2O 3 is dissociated, resulting in partial reduction of the lanthanum to LaO x(x <3/2). In addition, the lanthanum rich phase diffuses from bulk into the surface of the sample. The lack of lattice oxygen in this phase has a favorable effect on emission, which leads to a lower work function for the Mo La 2O 3 cathode.
文摘The preparation of nano sized La 2O 3 powder by mechanochemical reaction of lanthanum carbonate with sodium hydroxide and subsequent heat treatment was studied using X ray diffraction, differential thermal and thermo gravimetric analysis and transmission electron microscopy. It was found that the mechanochemical reaction process can be divided into two steps: the first step is the multi phases mechanochemical reaction of lanthanum carbonate with NaOH to form amorphous lanthanum basic carbonate and lanthanum hydroxide, and the second step is the crystallization of basic lanthanum carbonate with the formula of La 2(OH) 2(CO 3) 2·H 2O under a quasi hydrothermal synthesis condition caused by the mechanical ball milling. The synthesized La 2O 3 powder appears clearly separated spherical like monodisperse nano size particles in which particle size ranges from 30 to 50 nm.
基金supported by the National Natural Science Foundation of China (No. 50675070)
文摘Hydrogen was produced over noble metal（Ir, Ru, Rh, Pd） catalysts supported on various oxides, including γ-Al2O3, CeO2, ZrO2 and La2O3, via the autothermal reforming reaction of ethanol （ATRE） and oxidative reforming reaction of ethanol （OSRE）. The conversion of ethanol and selectivites for hydrogen and byproducts such as methane, ethylene and acetaldehyde were studied. It was found that lanthana alone possessed considerable activity for the ATRE reaction, which could be used as a functional support for ATRE catalysts. It was demonstrated that Ir/La2O3 prevented the formation of methane, and Rh/La2O3 encumbered the production of ethylene and acetaldehyde. ATRE reaction was carried out over La2O3-supported catalysts （Ir/La2O3） with good stability on stream, high conversion, and excellent hydrogen selectivity approaching thermodynamic limit under autothermal condition. Typically, 3.4H2 molecules can be extracted from a pair of ethanol and water molecules over Ir（5wt%）/La2O3. The results presented in this paper indicate that Ir/La2O3 can be used as a promising catalyst for hydrogen production via ATRE reaction from renewable ethanol.
文摘A new process for electrolytic production of a perfluorinated compound, （CF3）3N, using lanthanum nickel oxide-coated Ni sheet anode in the （CH3）4NF· 4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone（PVP）. The main components of the thin films were La2O3, LaNiO3, and La2NiO4 at 500, 750 and 1000℃, respectively. The anode performance in the （CH3）4NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO3-coated Ni sheet anode gives the best anode performance. The potential of LaNiO3-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm^-2 in the （CH3）4NF·4.0HF melt for 100 h. This is because LaNiO3 and NiF3 and/or Ni2F5, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of （CF3）3N （21.4%） was obtained at 20 mA·cm^-2 in （CH3）4NF·4.0HF melt using the LaNiO3-coated Ni sheet.
文摘A new method for the determination of trace non-rare earth elements (NREEs) impurities in high-purity lanthanum oxide by HPLC combined with ICP-AES is proposed. The chromatographic retention behaviors of matrix (La) and NREEs were studied using 2-ethylhexyl hydrogen 2-ethylhexyl phosphonate (P507) chelating resin as the stationary phase and dilute nitric acid as the mobile phase. It is found that the use of pH 1.7 nitric acid enables effective elution of NREEs from HPLC column, but the lanthanum remains on the column. The experimental results show that a favorable separation between matrix lanthanum and NREEs can be obtained within 15 min. The method proposed is applied to the determination of 8 NREEs impurities in high-purity La2O3. The recoveries of 8 NREEs are in the range of 90 % similar to 110 %.
文摘A new method for determination of trace silicon in high purity lanthanum oxide by using electrothermal vaporization (ETV) ICP AES with polytetrafluoroethylene(PTFE) slurry as a fluorinating reagent has been proposed. Under the optimized experimental conditions, the fluorination reactions of analyte(Si) and matrix(La) with PTFE in the graphite furnace took place at high temperature, and the fractional volatilily between Si and La was observed. Based on this principle the matrix interference could be eliminated. The detection limit of Si was 4.0 μg·L -1 , and the RSD was 3.4%( C =0.2 mg·L -1 , n =10). The procedure proposed has been applied successfully to determine trace Si in La 2O 3 without any chemical pre treatment.
基金supported by the National Natural Science Foundation of China (Grant No. 60578041)the Shanghai Leading Academic Disciplines (Grant No. S30107)
文摘Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.
文摘In situ activation process of Mo-La2O3 prototype cathode at high temperature was systematically investigated by XPS/AES. The oxygen species produced during the process were characterized at different temperatures. The results show that there exist two kinds of oxygen ions at above 1300 ℃, the lattice oxygen with lower binding energy(Eb=530.00 eV) should be dissociated from the lattice oxygen of La2O3. It may be concluded that La2O3 was partly reduced to LaOx(x<3/2) due to the dissociation of lattice oxygen. And the oxygen may play a favorable or an unfavorable role in emission depending upon its relative quantity and position in the surface layer.
基金supported by the National Natural Science Foundation of China(Nos.50571081 and 50671083)the Key Laboratory of the Ministry of Education of China for Conveyance and Equipment(East China Jiaotong University)
文摘Modification of ZL107 aluminum alloy has been successfully achieved by using La2O3. The different casting parameters, including casting temperature as well as holding time and modifier content, were carried out to investigate the modification effects. The results show that the best modifier content is 1.0 wt.%, and the casting temperature has little effect. In addition, the wear behavior of modified and unmodified ZL 107 has been compared. The wear resistance of as-cast ZL 107 aluminum alloy can be significantly improved after modification.
基金supported by the National Natural Science Foundation of China(21473233,21403277)the Frontier Science Program of Shell Global Solutions International B.V.(PT32281)+1 种基金the Ministry of Science and Technology of China(2016YFA0202802)the Shanghai Municipal Science and Technology Commission(14ZR1444600)~~
文摘Density‐functional theory calculations were carried out to study the strontium(Sr)‐doping effect on methane activation over a lanthanum‐oxide(La2O3)catalyst for the oxidative coupling of methane(OCM)using the cluster model.Eight Sr‐doped La2O3cluster models were built from pure La2O3clusters that were used previously to model the La2O3catalyst.These form two distinct categories,namely,those without a radical character(LaSrO2(OH),La2SrO4,La3SrO5(OH),and La5SrO8(OH))and those with a radical character(LaSrO3,La2SrO4(OH),La3SrO6,and La5SrO9).The potential‐energy surface for CH4activation to form a CH3radical at different Sr-O and La-O pair sites on these Sr‐doped La2O3clusters was calculated to study the Sr‐doping effect on the OCM catalytic activity.CH4physisorption and chemisorption energies,and activation barriers,and CH3desorption energies were predicted.Compared with the pure La2O3clusters,in general,the Sr‐doped La2O3clusters are thermodynamically and kinetically more reactive with CH4.For the Sr‐doped La2O3clusters without the radical character,the Sr-O pair site is more reactive with CH4than the La-O pair site,although a direct release of the CH3radical is also highly endothermic as in the case of the pure La2O3clusters.In contrast,for the Sr‐doped La2O3clusters with a radical character,the activation of CH4at the oxygen radical site and the release of the CH3radical are much easier.Thus,our calculations suggest that the Sr dopant prompts the OCM catalytic activity of the La2O3catalyst by providing a highly active oxygen‐radical site and by strengthening the basicity of the M-O pair site,which leads to lower CH4activation energies and lower CH3desorption energies.
文摘Lead-free piezoelectric ceramics of (Bi1/2Na1/2)TiO3-BaTiO3(BNT-BT) were prepared by the conventional piezoelectric ceramic preparation technique (free air atmosphere sintering). The influence of BaTiO3 additive amount and La2O3 additive amount on the properties of BNT-BT lead-free piezoceramics were investigated. The results show that the dielectric constant(ε) and piezoelectric strain constant(d33) of materials start increasing and then decreasing while BaTiO3 additive amount increasing, the e and d33 of materials have maximum value (ε= 1650, d33 = 120 PC·N -1 ) while x (BaTiO3) =0.06 mol. Theεand d33 of materials start increasing and then decreasing while La2O3 additive amount increasing, the e and d33 of materials have maximum value (ε= 1684, d33 = 153 PC·N-1) while w(La2O3) =0.3% . The influence of La2O3 additive amount on the microstructure of BNT-BT piezoelectric ceramics was analysed by SEM( scanning electron microscope). The influence mechanism of La2O3 additive amount on the properties of BNT-BT piezoelectric ceramics was discussed. The BNT-BT ceramics with optimum comprehensive properties were obtained.
文摘Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.
基金Project supported by the National Natural Science Foundation of China(5057403)Scientific Research Special Foundation of Doctor Subject of Chinese University(20030145015)
文摘The high temperature chemical reaction process of La2O3 in H3BO3-C system was studied by means of XRD and TG-DTA.The results showed that dehydration reaction of H3BO3 occurred in the temperature range of 82～390 ℃;La2O3 and B2O3 reacted to form LaB3O6,LaBO3,and B4C in the temperature range of 836～1400℃;at 1450 ℃,B4C and LaBO3 further reacted to form LaB4,and partial LaB4 and B reacted to form LaB6;at 1500 ℃,LaB4 and B reacting into LaB6 was the main reaction,and the content of LaB6 increased with prolonging time.
基金supported by University of Kashan(Grant No.158426/29)
文摘Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.
基金This work was financially supported by the National Natural Science Foundation of China (No.50374008).
文摘The thermal decomposition process of air-aged La203 in argon atmosphere was studied using nonisothermal TG-DSC. X-ray diffraction and TG-DSC analysis showed that the aged powder was composed of La（OH）3 with small amounts of oxycarbonate. The decomposition process of air-aged La2O3 involves the two-step decomposition of La（OH）3 and the decomposition of oxycarbonate. The kinetic analysis of the two-step decomposition of La（OH）3 was carried out using Coats-Redfern and isoconversion （Ozawa） methods. The kinetics of the two-step decomposition can be described in terms of the nucleation and growth model A （m=1.5, m is the model parameter） and A （m=2.5）, respectively. The apparent activation energy for the first step is 136-144 （Coats-Redfern） and 137-164 kJ/mol （isoconversion）. The apparent activation energy for the second step is 191-194 （Coats-Redfern） and 186-213 kJ/mol （isoconversion）.
文摘Light burned magnesia powders with different particle sizes were obtained by calcining crystalline magnesite.Sintered magnesia was prepared from the light burned magnesia powders by adding different amounts of La2O3.The effect of the La2O3 addition on the densification of magnesia was studied.The results show that the densification of sintered magnesia can be promoted both by reducing the particle size of the light burned powder and by adding small amounts of La2O3.The effect of the La2O3 addition is more significant:the maximum bulk density of the sintered magnesia can reach 3.49 g·cm-3 and the apparent porosity can be reduced to 0.33%.During sintering,Ca2+from the impurities enters La2O3 lattices,causing lattice distortion of La2O3 thus promoting the formation of La4.67(SiO4)3O phase and CaLa4(SiO4)3O phase,which fill the pores between the MgO grains and promote the densification of sintered magnesia.
基金Project supported by the Basic Science Research Fund for the Central Universities （Grant No. K50511250009）.
文摘We report on the performance of La203/InA1N/GaN metal-oxide-semiconductor high electron mobility transistors （MOSHEMTs） and InA1N/GaN high electron mobility transistors （HEMTs）. The MOSHEMT presents a maximum drain current of 961 mA/mm at Vgs = 4 V and a maximum transconductance of 130 mS/mm compared with 710 mA/mm at Vgs = 1 V and 131 mS/mm for the HEMT device, while the gate leakage current in the reverse direction could be reduced by four orders of magnitude. Compared with the HEMT device of a similar geometry, MOSHEMT presents a large gate voltage swing and negligible current collapse.
文摘Kinetics of carbothermic reduction of manganese oxide and the catalyticeffect of La_2O_3 on the reduction have been studied by the measurement of mass loss in N_2atmosphere at different temperatures and followed by SEM analysis. It is concluded that the kineticsof carbothermic reduction of manganese oxide is divided into three stages: gas diffusioncontrolling stage, carbon gasification con-trolling stage and solid state diffusion controllingstage. La_2O_3 has catalytic effect on the reduction. The catalytic effect of La_2O_3 increases withthe added amount of La_2O_3. SEM analysis shows that the catalytic mechanism is that La_2O_3promotes the transfer of oxygen ions so that carbon gasifying is catalyzed and thus carbothermicreduction of MnO_2 is catalyzed.
文摘In order to explore new application opportunities of Barium Strontium Titanate (BST) ceramic composite by modifying the conventional ferroelectric properties of BST through La<sub>2</sub>O<sub>3</sub> doping in BST matrix sintered at different temperature was investigated in this current study. Unadulterated Ba<sub>0.3</sub>Sr<sub>0.7</sub>TiO<sub>3</sub> (BST) matrix was prepared from BaTiO<sub>3</sub> (99.95%) and SrTiO<sub>3</sub> (99.95%) taken in stoichiometric extents which later doped by La<sub>2</sub>O<sub>3</sub> (99.99%) in varying extents (0.05 g, 0.10 g and 0.15 g) exploiting solid state reaction route. Doping caused drag effect for the penetration of impurities and sintering temperature helped the impurities migration to BST. Dielectric constant gets lower with rising of frequency, as electrons do not get enough time to polarize at high frequency. Dielectric constant and conductance are found maximum for the sample (0.1 g La<sub>2</sub>O<sub>3</sub> doped BST) sintered at 1460<span style="white-space:nowrap;">°</span>C and reverse is found in impedance analysis. These electrical properties showed visible frequency dependent response irrespective of sintering temperature and doping.
