The common reflection surface （CRS） stack is based on the local dip of the reflector and the reflection response within the first Fresnel zone. During the CRS stack all the information given by a multi-coverage refl...The common reflection surface （CRS） stack is based on the local dip of the reflector and the reflection response within the first Fresnel zone. During the CRS stack all the information given by a multi-coverage reflection dataset can be successfully utilized. By now, it is known as the best zero-offset （ZO） imaging method. In this paper high quality CRS kinematic parameter sections are obtained by a modified CRS optimization strategy. Then stack apertures are calculated using the parameter sections which finally results in the realization of the CRS stack based on optimized aperture. Thus the advantages of CRS parameters are fully developed. Application to model and real seismic data reveals that, compared with the image section by a conventional CRS stack, the image section by CRS stack based on an optimized aperture improves both the signal-to-noise ratio and the continuity of reflection events.展开更多
B2B E Commerce is one of the most potential electronic commerce forms at present. But since traditional B2 B E Commerce system lacks an unified standard and solution of basic architectur e a nd interface, it has m...B2B E Commerce is one of the most potential electronic commerce forms at present. But since traditional B2 B E Commerce system lacks an unified standard and solution of basic architectur e a nd interface, it has many shortcomings such as poor reusability and poor extensi bility. In order to solve the problem, combined with Web Service technology, a B 2B E Commerce system model based on Web Service is proposed and analyzed. The m odel can combine relatively independent Web Service on Intranet and Internet by constructing core application program. As a part of supply chain, it can also pr ovide a standard interface for other applications such as ERP/CRM/SCM, etc. Th er efore, B2B E Commerce system with this form is easy for development, integratio n and maintenance. Finally, a solution of B2B E Commerce system based on Web Se rvice is propounded by introducing an instance.展开更多
Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relati...Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relation between velocity and porosity for the Tarim Basin carbonates well. We propose the porous-grain-upper-boundary （PGU） model for estimating the relation between velocity and porosity for low-porosity carbonates. In this model, the carbonate sediments are treated as packed media of porous elastic grains, and the carbonate pores are divided into isolated and connected pores The PGU model is modified from the porous-grain-stiff-sand （PGST） model by replacing the critical porosity with the more practical isolated porosity. In the implementation, the effective elastic constants of the porous grains are calculated by using the differential effective medium （DEM） model. Then, the elastic constants of connected porous grains in dry rocks are calculated by using the modified upper Hashin-Shtrikman bound. The application to the Tarim carbonates shows that relative to other conventional effective medium models the PGU model matches the well log data well.展开更多
By inducing the typical inventory control problem - the bullwhip effect, this paper presents vendor managed inventory (VMI) control methods on the basis of traditional methods of inventory management methods, construc...By inducing the typical inventory control problem - the bullwhip effect, this paper presents vendor managed inventory (VMI) control methods on the basis of traditional methods of inventory management methods, constructs a VMI mathematics model, and analyzes the influence of VMI on inventory cost and channel profit. Finally, a special case is studied to verify that VMI is an effective supply chain strategy that can not only increase channel profit of supplier and customer but also improve full channel coordination, thereby reducing the bullwhip effect.展开更多
This paper focuses on the training modes of interdisciplinary and application-oriented talents of business English and the constructions of curriculum. In the light of our socialist market-oriented economy characteris...This paper focuses on the training modes of interdisciplinary and application-oriented talents of business English and the constructions of curriculum. In the light of our socialist market-oriented economy characteristics, the discussion proceeds, in theory and practice, by putting forward a relatively profound approach according to the trend in the demands for business English talents and to the operational patterns of business English discipline, with some suggestions about the training modes of interdisciplinary and application-oriented talents and the construction of curriculum.展开更多
This paper presents a new kind of macromodel of OTA,which can be used to solve the problem in which the two port macromodel couldnt reflect some functions of the OTA.The new model also opens up a new way for the simu...This paper presents a new kind of macromodel of OTA,which can be used to solve the problem in which the two port macromodel couldnt reflect some functions of the OTA.The new model also opens up a new way for the simulation of the OTA circuit.This paper discusses the way of designing this model and simulating it in SPICE.The result proves its reasonable design and its simplicity in structure.In the application of this model,we design a complete symmetric double differential quarter square OTA multiplying unit by using four three port OTA macromodels.It successfully solved the problem of the unsymmetry of two input ports in an OTA multiplying unit.This result fully agrees with the experiment.展开更多
[Objective] The aim was to establish drought forecasting model with high precision. [Method] With an ARIMA regression model, the research performed Palmer Drought mode（PDSI） time series modeling analysis of Henan Pr...[Objective] The aim was to establish drought forecasting model with high precision. [Method] With an ARIMA regression model, the research performed Palmer Drought mode（PDSI） time series modeling analysis of Henan Province based on PDSI time series and DPS（Data Processing Software） in order to build drought forecasting model. [Result] It is feasible to perform drought forecasting with appropriate parameters. [Conclusion] ARIMA model is practical and more precise in PDSI-based drought analysis and forecasting.展开更多
Locality preserving projection (LPP) is a newly emerging fault detection method which can discover local manifold structure of a data set to be analyzed, but its linear assumption may lead to monitoring performance de...Locality preserving projection (LPP) is a newly emerging fault detection method which can discover local manifold structure of a data set to be analyzed, but its linear assumption may lead to monitoring performance degradation for complicated nonlinear industrial processes. In this paper, an improved LPP method, referred to as sparse kernel locality preserving projection (SKLPP) is proposed for nonlinear process fault detection. Based on the LPP model, kernel trick is applied to construct nonlinear kernel model. Furthermore, for reducing the computational complexity of kernel model, feature samples selection technique is adopted to make the kernel LPP model sparse. Lastly, two monitoring statistics of SKLPP model are built to detect process faults. Simulations on a continuous stirred tank reactor (CSTR) system show that SKLPP is more effective than LPP in terms of fault detection performance.展开更多
By adopting the chaotic searching to improve the global searching performance of the particle swarm optimization (PSO), and using the improved PSO to optimize the key parameters of the support vector machine (SVM) for...By adopting the chaotic searching to improve the global searching performance of the particle swarm optimization (PSO), and using the improved PSO to optimize the key parameters of the support vector machine (SVM) forecasting model, an improved SVM model named CPSO-SVM model was proposed. The new model was applied to predicting the short term load, and the improved effect of the new model was proved. The simulation results of the South China Power Market’s actual data show that the new method can effectively improve the forecast accuracy by 2.23% and 3.87%, respectively, compared with the PSO-SVM and SVM methods. Compared with that of the PSO-SVM and SVM methods, the time cost of the new model is only increased by 3.15 and 4.61 s, respectively, which indicates that the CPSO-SVM model gains significant improved effects.展开更多
By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, a...By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, and the volume of the cavity of the mine based on the cavity 3D model was calculated. In order to compute the reserves, a grade block model was built and each metal element grade was estimated using Ordinary Kriging. Then, the reserve of each metal element and every sublevel of the mine was worked out. Finally, the calculated result of each metal reserve to its actual prospecting reserve was compared, and the results show that they are all almost equal to each other. The absolute errors of Sn, Pb, and Zn reserves are only 1.45%, 1.59% and 1.62%, respectively. Obviously, the built models are reliable and the calculated results of reserves are correct. They can be used to assist the geologic and mining engineers of the mine to do research work of reserves estimation, mining design, plan making and so on.展开更多
Applying man-machine-environment system engineering(MMESE)in vessels is a method to improve the effectiveness of the interaction between equipment, environment, and humans for the purpose of advancing operating effici...Applying man-machine-environment system engineering(MMESE)in vessels is a method to improve the effectiveness of the interaction between equipment, environment, and humans for the purpose of advancing operating efficiency, performance, safety, and habitability of a vessel and its subsystems. In the following research, the life cycle of vessels was divided into 9 phases, and 15 research subjects were also identified from among these phases. The 15 subjects were systemized, and then the man-machine-environment engineering system application model for vessels was developed using the ICAM definition method 0 (IDEF0), which is a systematical modeling method. This system model bridges the gap between the data and information flow of every two associated subjects with the major basic research methods and approaches included, which brings the formerly relatively independent subjects together as a whole. The application of this systematic model should facilitate the application of man-machine-environment system engineering in vessels, especially at the conceptual and embodiment design phases. The managers and designers can deal with detailed tasks quickly and efficiently while reducing repetitive work.展开更多
Red soil is a very important soil resource in southern China. However, due to being simultaneously of high productive potentialities and severely degraded, it needs harnessing urgently. Red Soil Resource Information S...Red soil is a very important soil resource in southern China. However, due to being simultaneously of high productive potentialities and severely degraded, it needs harnessing urgently. Red Soil Resource Information System (RSRIS) based on remote sensing and geographic information system (GIS) plays an important role in survey, evaluation, utilization and management of red soil resource. RSRIS of Quzhou City) Zhejiang Province (1:250000) and RSRIS of Longyou County, Zhejiang Province (1:50000) have been made respectively on SUN SPARC station and using ARC/INFO. This paper introduces the system design,database creation and system functions, and it particularly focuses on developing applied models, such as red soil resource division and mapping, suitability evaluation, erosion risk evaluation, plant utilization zone etc. The problems on study of RSRIS and its developing strategy are also discussed.展开更多
Focusing on the issue to deal with inadequate extraction of metallogenic information especially geological information,a new method of extracting metallogenic information based on field model,i.e.the field analysis me...Focusing on the issue to deal with inadequate extraction of metallogenic information especially geological information,a new method of extracting metallogenic information based on field model,i.e.the field analysis method of metallogenic information,was proposed.In addition,a case study by using the method of the extraction of metallogenic information from the west Guangxi and southeast Yunnan district as an example was performed.The representation method for the field models of metallogenic information,including the metallogenic influence field model and the metallogenic distance field model,was discussed by introducing the concept of the field theory,based on the characteristic analysis of the distance gradualness and the influence superposition of metallogenic information.According to the field theory superposition principle and the spatial distance analysis method,the mathematical models for the metallogenic influence field and the metallogenic distance field of point,line and area geological bodies were derived out by using parameter equation and calculus.Based on the metallogenic background analysis,the metallogenic information field models of synsedimentary faults and manganese sedimentary basins were built.The relationship between the metallogenic information fields and the manganese mineralization distribution was also investigated by using the method of metallogenic information field analysis.The instance study indicates that the proposed method of metallogenic information field analysis is valid and useful for extracting the ore-controlling information of synsedimentary faults and manganese sedimentary basins in the study area,with which the extraction results are significant both statistically and geologically.展开更多
Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas,...Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.展开更多
A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A si...A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A simplified version of the simulation model was further validated against methane emission measurements from various regions of the world, including italy, China, Indonesia, Philippines and the United States. Model validation suggested that the seasonal variation of methane emission was mainly regulated by rice growth and development and that methane emission could be predicted from rice net productivity, cultivar character, soil texture and temperature, and organic matter amendments. Model simulations in general agreed with the observations. The comparison between computed and measured methane emission resulted in correlation coefficients r2 values from 0.450 to 0.952, significant at 0.01-0.001 probability level.On the basis of available information on rice cultivated area, growth duration, grain yield, soil texture and temperature, methane emission from rice paddy soils of China's Mainland was estimated for 28 rice cultivated provinces/municipal cities by employing the validated model. The calculated daily methane emission rates, on a provincial scale, ranged from 0.12 to 0.71 g m-2 with an average of 0.26 g m-2. A total amount of 7.92 Tg CH4 per year, ranging from 5.89 to 11.17 Tg year-1, was estimated to be released from Chinese rice paddy soils. Of the total, 45% was emitted from the single-rice growing season, and 19% and 36% were from the early-rice and the late-rice growing seasons, respectively. Approximately 70% of the total was emitted in the region located at latitude between 25°and 32°N. The emissions from rice fields in Sichuan and Hunan provinces were calculated to be 2.34 Tg year-1, accounting for approximately 30% of the total.展开更多
The paper studied the connection between internet of things （lOT） technology and transportation industry. Meanwhile, the definition of IOT in transportation was given. Concerning that many problems occurred during t...The paper studied the connection between internet of things （lOT） technology and transportation industry. Meanwhile, the definition of IOT in transportation was given. Concerning that many problems occurred during the process of traditional intelligent transportation system, the paper proposed a promising model of lOT in transportation. The advantage of the information utilization model from information to function was confirmed through comparative study. Finally, the model presented that a real interconnection of transportation would be achieved based on the unified information collection. It can greatly save cost on technology transfer, exploit potential value of information, and promote the emergence of a sustainable information service market and the industrial upgrade.展开更多
Irregular plates are very common structures in engineering,such as ore structures in mining.In this work,the Galerkin solution to the problem of a Kirchhoff plate lying on the Winkler foundation with two edges simply ...Irregular plates are very common structures in engineering,such as ore structures in mining.In this work,the Galerkin solution to the problem of a Kirchhoff plate lying on the Winkler foundation with two edges simply supported and the other two clamped supported is derived.Coordinate transformation technique is used during the solving process so that the solution is suitable to irregular shaped plates.The mechanical model and the solution proposed are then used to model the crown pillars between two adjacent levels in Sanshandao gold mine,which uses backfill method for mining operation.After that,an objective function,which takes security,economic profits and filling effect into consideration,is built to evaluate design proposals.Thickness optimizations for crown pillars are finally conducted in both conditions that the vertical stiffness of the foundation is known and unknown.The procedure presented in the work provides the guidance in thickness designing of complex shaped crown pillars and the preparation of backfill materials,thus to achieve the best balance between security and profits.展开更多
We introduce a novel Sermntic-Category- Tree （SCT） model to present the sen-antic structure of a sentence for Chinese-English Machine Translation （MT）. We use the SCT model to handle the reordering in a hierarchic...We introduce a novel Sermntic-Category- Tree （SCT） model to present the sen-antic structure of a sentence for Chinese-English Machine Translation （MT）. We use the SCT model to handle the reordering in a hierarchical structure in which one reordering is dependent on the others. Different from other reordering approaches, we handle the reordering at three levels： sentence level, chunk level, and word level. The chunk-level reordering is dependent on the sentence-level reordering, and the word-level reordering is dependent on the chunk-level reordering. In this paper, we formally describe the SCT model and discuss the translation strategy based on the SCT model. Further, we present an algorithm for analyzing the source language in SCT and transforming the source SCT into the target SCT. We apply the SCT model to a role-based patent text MT to evaluate the ability of the SCT model. The experimental results show that SCT is efficient in handling the hierarehical reordering operation in MT.展开更多
A hydrological simulation in the Huaihe River Basin(HRB) was investigated using two different models: a coupled land surface hydrological model(CLHMS), and a large-scale hydrological model(LSX-HMS). The NCEP-NCAR rean...A hydrological simulation in the Huaihe River Basin(HRB) was investigated using two different models: a coupled land surface hydrological model(CLHMS), and a large-scale hydrological model(LSX-HMS). The NCEP-NCAR reanalysis dataset and observed precipitation data were used as meteorological inputs. The simulation results from both models were compared in terms of flood processes forecasting during high flow periods in the summers of 2003 and 2007, and partial high flow periods in 2000. The comparison results showed that the simulated streamflow by CLHMS model agreed well with the observations with Nash-Sutcliffe coefficients larger than 0.76, in both periods of 2000 at Lutaizi and Bengbu stations in the HRB, while the skill of the LSX-HMS model was relatively poor. The simulation results for the high flow periods in 2003 and 2007 suggested that the CLHMS model can simulate both the peak time and intensity of the hydrological processes, while the LSX-HMS model provides a delayed flood peak. These results demonstrated the importance of considering the coupling between the land surface and hydrological module in achieving better predictions for hydrological processes, and CLHMS was proven to be a promising model for future applications in flood simulation and forecasting.展开更多
基金sponsored by the 863 Program (Grant No.2006AA06Z206)the 973 Program (Grant No.2007CB209605)
文摘The common reflection surface （CRS） stack is based on the local dip of the reflector and the reflection response within the first Fresnel zone. During the CRS stack all the information given by a multi-coverage reflection dataset can be successfully utilized. By now, it is known as the best zero-offset （ZO） imaging method. In this paper high quality CRS kinematic parameter sections are obtained by a modified CRS optimization strategy. Then stack apertures are calculated using the parameter sections which finally results in the realization of the CRS stack based on optimized aperture. Thus the advantages of CRS parameters are fully developed. Application to model and real seismic data reveals that, compared with the image section by a conventional CRS stack, the image section by CRS stack based on an optimized aperture improves both the signal-to-noise ratio and the continuity of reflection events.
文摘B2B E Commerce is one of the most potential electronic commerce forms at present. But since traditional B2 B E Commerce system lacks an unified standard and solution of basic architectur e a nd interface, it has many shortcomings such as poor reusability and poor extensi bility. In order to solve the problem, combined with Web Service technology, a B 2B E Commerce system model based on Web Service is proposed and analyzed. The m odel can combine relatively independent Web Service on Intranet and Internet by constructing core application program. As a part of supply chain, it can also pr ovide a standard interface for other applications such as ERP/CRM/SCM, etc. Th er efore, B2B E Commerce system with this form is easy for development, integratio n and maintenance. Finally, a solution of B2B E Commerce system based on Web Se rvice is propounded by introducing an instance.
基金supported by the National Basic Research Program of China(2013CB228602)the National High Technology Research Program of China(2013AA064202)the National Science and Technology Major Project of China(Grant No.2011ZX05004-003)
文摘Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relation between velocity and porosity for the Tarim Basin carbonates well. We propose the porous-grain-upper-boundary （PGU） model for estimating the relation between velocity and porosity for low-porosity carbonates. In this model, the carbonate sediments are treated as packed media of porous elastic grains, and the carbonate pores are divided into isolated and connected pores The PGU model is modified from the porous-grain-stiff-sand （PGST） model by replacing the critical porosity with the more practical isolated porosity. In the implementation, the effective elastic constants of the porous grains are calculated by using the differential effective medium （DEM） model. Then, the elastic constants of connected porous grains in dry rocks are calculated by using the modified upper Hashin-Shtrikman bound. The application to the Tarim carbonates shows that relative to other conventional effective medium models the PGU model matches the well log data well.
文摘By inducing the typical inventory control problem - the bullwhip effect, this paper presents vendor managed inventory (VMI) control methods on the basis of traditional methods of inventory management methods, constructs a VMI mathematics model, and analyzes the influence of VMI on inventory cost and channel profit. Finally, a special case is studied to verify that VMI is an effective supply chain strategy that can not only increase channel profit of supplier and customer but also improve full channel coordination, thereby reducing the bullwhip effect.
文摘This paper focuses on the training modes of interdisciplinary and application-oriented talents of business English and the constructions of curriculum. In the light of our socialist market-oriented economy characteristics, the discussion proceeds, in theory and practice, by putting forward a relatively profound approach according to the trend in the demands for business English talents and to the operational patterns of business English discipline, with some suggestions about the training modes of interdisciplinary and application-oriented talents and the construction of curriculum.
文摘This paper presents a new kind of macromodel of OTA,which can be used to solve the problem in which the two port macromodel couldnt reflect some functions of the OTA.The new model also opens up a new way for the simulation of the OTA circuit.This paper discusses the way of designing this model and simulating it in SPICE.The result proves its reasonable design and its simplicity in structure.In the application of this model,we design a complete symmetric double differential quarter square OTA multiplying unit by using four three port OTA macromodels.It successfully solved the problem of the unsymmetry of two input ports in an OTA multiplying unit.This result fully agrees with the experiment.
文摘[Objective] The aim was to establish drought forecasting model with high precision. [Method] With an ARIMA regression model, the research performed Palmer Drought mode（PDSI） time series modeling analysis of Henan Province based on PDSI time series and DPS（Data Processing Software） in order to build drought forecasting model. [Result] It is feasible to perform drought forecasting with appropriate parameters. [Conclusion] ARIMA model is practical and more precise in PDSI-based drought analysis and forecasting.
基金Supported by the National Natural Science Foundation of China （61273160）, the Natural Science Foundation of Shandong Province of China （ZR2011FM014） and the Fundamental Research Funds for the Central Universities （10CX04046A）.
文摘Locality preserving projection (LPP) is a newly emerging fault detection method which can discover local manifold structure of a data set to be analyzed, but its linear assumption may lead to monitoring performance degradation for complicated nonlinear industrial processes. In this paper, an improved LPP method, referred to as sparse kernel locality preserving projection (SKLPP) is proposed for nonlinear process fault detection. Based on the LPP model, kernel trick is applied to construct nonlinear kernel model. Furthermore, for reducing the computational complexity of kernel model, feature samples selection technique is adopted to make the kernel LPP model sparse. Lastly, two monitoring statistics of SKLPP model are built to detect process faults. Simulations on a continuous stirred tank reactor (CSTR) system show that SKLPP is more effective than LPP in terms of fault detection performance.
基金Project(70572090) supported by the National Natural Science Foundation of China
文摘By adopting the chaotic searching to improve the global searching performance of the particle swarm optimization (PSO), and using the improved PSO to optimize the key parameters of the support vector machine (SVM) forecasting model, an improved SVM model named CPSO-SVM model was proposed. The new model was applied to predicting the short term load, and the improved effect of the new model was proved. The simulation results of the South China Power Market’s actual data show that the new method can effectively improve the forecast accuracy by 2.23% and 3.87%, respectively, compared with the PSO-SVM and SVM methods. Compared with that of the PSO-SVM and SVM methods, the time cost of the new model is only increased by 3.15 and 4.61 s, respectively, which indicates that the CPSO-SVM model gains significant improved effects.
基金Project(50490274) supported by the National Natural Science Foundation of China
文摘By the aid of the international mining software SURPAC, a geologic database for a multi-metal mine was established, 3D models of the surface, geologic fault, ore body, cavity and the underground openings were built, and the volume of the cavity of the mine based on the cavity 3D model was calculated. In order to compute the reserves, a grade block model was built and each metal element grade was estimated using Ordinary Kriging. Then, the reserve of each metal element and every sublevel of the mine was worked out. Finally, the calculated result of each metal reserve to its actual prospecting reserve was compared, and the results show that they are all almost equal to each other. The absolute errors of Sn, Pb, and Zn reserves are only 1.45%, 1.59% and 1.62%, respectively. Obviously, the built models are reliable and the calculated results of reserves are correct. They can be used to assist the geologic and mining engineers of the mine to do research work of reserves estimation, mining design, plan making and so on.
基金Supported by the Fundamental Research Program of CSTIND under Grant No.GF2007004Harbin Engineering University Central Foundation under Grant No.HEUCF100718
文摘Applying man-machine-environment system engineering(MMESE)in vessels is a method to improve the effectiveness of the interaction between equipment, environment, and humans for the purpose of advancing operating efficiency, performance, safety, and habitability of a vessel and its subsystems. In the following research, the life cycle of vessels was divided into 9 phases, and 15 research subjects were also identified from among these phases. The 15 subjects were systemized, and then the man-machine-environment engineering system application model for vessels was developed using the ICAM definition method 0 (IDEF0), which is a systematical modeling method. This system model bridges the gap between the data and information flow of every two associated subjects with the major basic research methods and approaches included, which brings the formerly relatively independent subjects together as a whole. The application of this systematic model should facilitate the application of man-machine-environment system engineering in vessels, especially at the conceptual and embodiment design phases. The managers and designers can deal with detailed tasks quickly and efficiently while reducing repetitive work.
文摘Red soil is a very important soil resource in southern China. However, due to being simultaneously of high productive potentialities and severely degraded, it needs harnessing urgently. Red Soil Resource Information System (RSRIS) based on remote sensing and geographic information system (GIS) plays an important role in survey, evaluation, utilization and management of red soil resource. RSRIS of Quzhou City) Zhejiang Province (1:250000) and RSRIS of Longyou County, Zhejiang Province (1:50000) have been made respectively on SUN SPARC station and using ARC/INFO. This paper introduces the system design,database creation and system functions, and it particularly focuses on developing applied models, such as red soil resource division and mapping, suitability evaluation, erosion risk evaluation, plant utilization zone etc. The problems on study of RSRIS and its developing strategy are also discussed.
基金Project(2006BAB01B07) supported by the National Science and Technology Pillar Program during the 11th Five-Year Plan Period of China
文摘Focusing on the issue to deal with inadequate extraction of metallogenic information especially geological information,a new method of extracting metallogenic information based on field model,i.e.the field analysis method of metallogenic information,was proposed.In addition,a case study by using the method of the extraction of metallogenic information from the west Guangxi and southeast Yunnan district as an example was performed.The representation method for the field models of metallogenic information,including the metallogenic influence field model and the metallogenic distance field model,was discussed by introducing the concept of the field theory,based on the characteristic analysis of the distance gradualness and the influence superposition of metallogenic information.According to the field theory superposition principle and the spatial distance analysis method,the mathematical models for the metallogenic influence field and the metallogenic distance field of point,line and area geological bodies were derived out by using parameter equation and calculus.Based on the metallogenic background analysis,the metallogenic information field models of synsedimentary faults and manganese sedimentary basins were built.The relationship between the metallogenic information fields and the manganese mineralization distribution was also investigated by using the method of metallogenic information field analysis.The instance study indicates that the proposed method of metallogenic information field analysis is valid and useful for extracting the ore-controlling information of synsedimentary faults and manganese sedimentary basins in the study area,with which the extraction results are significant both statistically and geologically.
基金supported by a grant from the National HighTech Research and Development Projects (Grant No. 2015AA020303)
文摘Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.
文摘A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A simplified version of the simulation model was further validated against methane emission measurements from various regions of the world, including italy, China, Indonesia, Philippines and the United States. Model validation suggested that the seasonal variation of methane emission was mainly regulated by rice growth and development and that methane emission could be predicted from rice net productivity, cultivar character, soil texture and temperature, and organic matter amendments. Model simulations in general agreed with the observations. The comparison between computed and measured methane emission resulted in correlation coefficients r2 values from 0.450 to 0.952, significant at 0.01-0.001 probability level.On the basis of available information on rice cultivated area, growth duration, grain yield, soil texture and temperature, methane emission from rice paddy soils of China's Mainland was estimated for 28 rice cultivated provinces/municipal cities by employing the validated model. The calculated daily methane emission rates, on a provincial scale, ranged from 0.12 to 0.71 g m-2 with an average of 0.26 g m-2. A total amount of 7.92 Tg CH4 per year, ranging from 5.89 to 11.17 Tg year-1, was estimated to be released from Chinese rice paddy soils. Of the total, 45% was emitted from the single-rice growing season, and 19% and 36% were from the early-rice and the late-rice growing seasons, respectively. Approximately 70% of the total was emitted in the region located at latitude between 25°and 32°N. The emissions from rice fields in Sichuan and Hunan provinces were calculated to be 2.34 Tg year-1, accounting for approximately 30% of the total.
基金CAE Internet of Things and its Application Project in 2010National Basic Research Program of China"973"Program (No. 2012CB315805)
文摘The paper studied the connection between internet of things （lOT） technology and transportation industry. Meanwhile, the definition of IOT in transportation was given. Concerning that many problems occurred during the process of traditional intelligent transportation system, the paper proposed a promising model of lOT in transportation. The advantage of the information utilization model from information to function was confirmed through comparative study. Finally, the model presented that a real interconnection of transportation would be achieved based on the unified information collection. It can greatly save cost on technology transfer, exploit potential value of information, and promote the emergence of a sustainable information service market and the industrial upgrade.
基金Project (51504044) supported by the National Natural Science Foundation of ChinaProject (14KF05) supported by the Research Fund of the State Key Laboratory of Coal Resources and Mine Safety(CUMT),China+2 种基金Project (2015CDJXY) supported by the Fundamental Research Funds for the Central Universities,ChinaProject (2015M570607) supported by Postdoctoral Science FoundationProject (2011DA105287-MS201503) supported by the Independent Subject of State Key Laboratory of Coal Mine Disaster Dynamics and Control,China
文摘Irregular plates are very common structures in engineering,such as ore structures in mining.In this work,the Galerkin solution to the problem of a Kirchhoff plate lying on the Winkler foundation with two edges simply supported and the other two clamped supported is derived.Coordinate transformation technique is used during the solving process so that the solution is suitable to irregular shaped plates.The mechanical model and the solution proposed are then used to model the crown pillars between two adjacent levels in Sanshandao gold mine,which uses backfill method for mining operation.After that,an objective function,which takes security,economic profits and filling effect into consideration,is built to evaluate design proposals.Thickness optimizations for crown pillars are finally conducted in both conditions that the vertical stiffness of the foundation is known and unknown.The procedure presented in the work provides the guidance in thickness designing of complex shaped crown pillars and the preparation of backfill materials,thus to achieve the best balance between security and profits.
基金supported by the National High Technology Research and Development Program of China under Grant No.2012AA011104the Fundamental Research Funds for the Center Universities
文摘We introduce a novel Sermntic-Category- Tree （SCT） model to present the sen-antic structure of a sentence for Chinese-English Machine Translation （MT）. We use the SCT model to handle the reordering in a hierarchical structure in which one reordering is dependent on the others. Different from other reordering approaches, we handle the reordering at three levels： sentence level, chunk level, and word level. The chunk-level reordering is dependent on the sentence-level reordering, and the word-level reordering is dependent on the chunk-level reordering. In this paper, we formally describe the SCT model and discuss the translation strategy based on the SCT model. Further, we present an algorithm for analyzing the source language in SCT and transforming the source SCT into the target SCT. We apply the SCT model to a role-based patent text MT to evaluate the ability of the SCT model. The experimental results show that SCT is efficient in handling the hierarehical reordering operation in MT.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA05110202)the National Natural Science Foundation of China (Grant Nos. 41175073, 41471016, and U1133603)
文摘A hydrological simulation in the Huaihe River Basin(HRB) was investigated using two different models: a coupled land surface hydrological model(CLHMS), and a large-scale hydrological model(LSX-HMS). The NCEP-NCAR reanalysis dataset and observed precipitation data were used as meteorological inputs. The simulation results from both models were compared in terms of flood processes forecasting during high flow periods in the summers of 2003 and 2007, and partial high flow periods in 2000. The comparison results showed that the simulated streamflow by CLHMS model agreed well with the observations with Nash-Sutcliffe coefficients larger than 0.76, in both periods of 2000 at Lutaizi and Bengbu stations in the HRB, while the skill of the LSX-HMS model was relatively poor. The simulation results for the high flow periods in 2003 and 2007 suggested that the CLHMS model can simulate both the peak time and intensity of the hydrological processes, while the LSX-HMS model provides a delayed flood peak. These results demonstrated the importance of considering the coupling between the land surface and hydrological module in achieving better predictions for hydrological processes, and CLHMS was proven to be a promising model for future applications in flood simulation and forecasting.
