期刊文献+

散装填料层泛点和压降的新关联 被引量:6

New Correlations of Flooding Point and Pressure Drop in Random Packed Tower
在线阅读 下载PDF
导出
摘要 在理论分析的基础上 ,导出了散装填料层泛点气体速度和压降的新关联式 ,由实验数据计算了常用填料新关联式的液泛填料因子和压降常数。新泛点关联式对 8种填料泛点气速的计算值与实验数据的总平均计算误差为 3.5 2 % ;新压降关联式对各种填料的压降平均计算误差一般在 10 %以下。关联值与实验数据吻合很好 ,计算准确性优于文献公式 ,且比文献公式计算简便。 Based on the theoretical analysis, new correlations for estimating gas velocity of flood point and pressure drop in random packed tower were derived, and the flooding factor and pressure drop constant of conventional packing were calculated by experimental data. The total mean error between the calculated flooding point gas velocity of eight kinds of packings by new flooding point correlation and the experimental value is 3.52%; the average error between the calculated pressure drop by new pressure drop correlation and the experimental value is generally less than 10%. A fair agreement is found between the calculated and experimental data, and the new correlations are more accurate, simple and convenient than by the equations in literature.
作者 王双成
出处 《化学工程》 CAS CSCD 北大核心 2003年第4期16-21,共6页 Chemical Engineering(China)
关键词 散装填料层 泛点 压降 关联式 填料塔 random packing flooding point pressure drop correlation formula
  • 相关文献

参考文献19

  • 1麦本熙.几种新型填料流体力学性能的关联.化学工程,1981,9(6):40-50.
  • 2陈昂.关于填料塔液泛速度的经验模型.化学工程,1983,11(4):61-64.
  • 3陈林君.填料塔液泛速度计算公式[J].化学工程,1987,(2):26-30.
  • 4金祖源.乱堆填料层压降半经验通用关联图[J].化学工程,1982,3:26-37.
  • 5谈遒 李锡源 李阿娜.几种Dg50乱堆塔填料流体力学性能的测定和关联.化工学报,1981,32(2):157-166.
  • 6Billet.R 魏建华 等译.填料塔[M].北京:化学工业出版社,1998.42—57.
  • 7南京化工学院.填料的流体力学特性(Ⅱ)——填料塔内的液泛现象.化学工程,1977,5(6):55-65.
  • 8天津大学.φ50mm金属鲍尔环、瓷矩鞍、短拉西环及拉西环填料的流体力学性能.化学工程,1977,5(1):9-20.
  • 9天津大学.几种聚丙烯填料的流体力学性能.化学工程,1979,7(3):37-42.
  • 10李阿娜.几种开孔填料的性能研究(一)-流体力学性能[J].化学工程,1984,12(4):37-45.

共引文献6

同被引文献51

  • 1赵静妮.填料塔技术的现状与发展趋势[J].兰州石化职业技术学院学报,2002,2(3):25-28. 被引量:22
  • 2董谊仁.填料因子的确定方法和物理意义[J].高校化学工程学报,1994,8(4):323-331. 被引量:4
  • 3梁朝林,黄洪,梅慈云,陈焕钦.两种新型填料的性能测试与评价[J].化学工程,1994,22(2):6-11. 被引量:6
  • 4卢励生 钱恒元 等.-[J].化工炼油机械,1982,(1):12-12.
  • 5Billet R 魏建华等(译).填料塔[M].北京:化学工业出版社,1998.39,67.
  • 6陈林君.填料塔液泛速度计算公式[J].化学工程,1987,(2):26-30.
  • 7李阿娜.几种开孔填料的性能研究(一)-流体力学性能[J].化学工程,1984,12(4):37-45.
  • 8陈昂.关于填料塔液泛速度的经验模型.化学工程,1983,11(4):61-64.
  • 9吉林化学工业公司研究院.φ38mm瓷矩鞍形、钢鲍尔环填料性能的测定.化学工程,1979,7(3):26-36.
  • 10天津大学.φ50mm金属鲍尔环、瓷矩鞍、短拉西环及拉西环填料的流体力学性能.化学工程,1977,5(1):9-20.

引证文献6

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部