摘要
扫描电镜原位高温成像技术是完成更高温度材料分析测试需求而发展的先进科学研究手段。为了进一步提高扫描电镜原位高温成像的图像质量,本文基于自主研发的扫描电子显微镜原位高温成像设备,研究了闪烁体前端导电层即铝膜的厚度对成像质量的影响。通过制备不同厚度的铝膜,以相同的放大倍率和工作距离在样品的同一区域实时观察闪烁体的铝膜对可见光的遮挡作用及成像效果。实验结果表明,镀有120 nm铝膜厚度的闪烁体更适用于高温成像。
In situ high temperature scanning electron microscopy(SEM)imaging is a critical technique for studying high-temperature resistant materials,such as metals and ceramics.To improve the image quality of in-situ high-temperature imaging,this study examined the effect of the conductive layer thickness at the front of scintillation body,namely the aluminum film.By preparing aluminum film of different thicknesses,the blocking effect of the film on visible light and the imaging effect of scintillator were observed in the same sample region under consistent magnification and working distance.Experimental result indicate that a 120 nm-thick aluminum film coating on the scintillator is optimal for high-temperature imaging.
作者
唐净
唐亮
张宜旭
吕俊霞
张跃飞
张泽
TANG Jing;TANG Liang;ZHANG Yixu;LÜJunxia;ZHANG Yuefei;ZHANG Ze(Department of Materials and Manufacturing,Beijing University of Technology,Beijing 100124;School of Materials Science and Engineering,Zhejiang University,Hangzhou Zhejiang 310027;School of Mechanical and Electrical Engineering,Guilin University of Electronic Technology,Guilin Guangxi 541004,China)
出处
《电子显微学报》
CAS
CSCD
北大核心
2024年第6期683-690,共8页
Journal of Chinese Electron Microscopy Society
基金
北京市教委科技计划重点项目(No.048000514122649)。
