摘要
连续热镀铝锌生产线的窄搭接电阻缝焊过程中常出现焊轮打火问题,导致焊缝质量下降造成断带,从而引发产线停机,因此需要对电阻焊过程中焊轮打火的原因进行分析。主要针对焊接电流、焊轮与钢带之间的接触电阻、钢带与钢带之间的接触电阻等因素进行探讨。分析发现,焊轮与钢带之间的接触电阻增大是导致焊轮打火的主要原因:焊轮表面的污染物会显著增加接触电阻,导致热量过大,烧穿焊缝;钢带表面的清洁度也对接触电阻有显著影响,导致电流分布不均,产生打火。此外,根据钢带厚度选择合适的焊接电流对于控制焊接过程中的打火现象也至关重要。
During the narrow lap resistance seam welding process in the continuous hot-dip aluminum-zinc production line,a common problem of welding wheel ignition occurs,leading to a decline in weld quality and causing breakage,which in turn leads to production line shutdowns.Therefore,it is necessary to analyze the causes of welding wheel ignition during the resistance welding process.The main factors discussed are welding current,contact resistance between the welding wheel and the steel strip,and contact resistance between the steel strips themselves.The analysis found that the increase in contact resistance between the welding wheel and the steel strip is the main reason for the welding wheel ignition:pollutants on the surface of the welding wheel significantly increase the contact resistance,leading to excessive heat and burning through the weld;the cleanliness of the steel strip surface also significantly affects the contact resistance,leading to uneven current distri‐bution and causing ignition.In addition,selecting the appropriate welding current according to the thickness of the steel strip is also crucial for controlling the ignition phenomenon during the welding process.
作者
李燕
吴观虎
LI Yan;WU Guanhu(BlueScope Steel Suzhou,Suzhou 215021,China;Sika(China)Ltd.,Suzhou 215021,China)
出处
《电焊机》
2024年第5期130-134,共5页
Electric Welding Machine
关键词
连续热镀铝锌线
窄搭接电阻焊
焊缝质量
焊轮
火花
hot-dip aluminum zinc production line
mash lap resistance seam welder
weld quality
welder
spark
