期刊文献+

部分预制装配型钢混凝土梁受力性能试验研究 被引量:18

Experimental research on mechanical performance of partially precast steel reinforced concrete beams
在线阅读 下载PDF
导出
摘要 结合国内外现有研究成果,提出部分预制装配型钢混凝土梁。结合2个系列7个梁试件的受弯性能静力试验及3个系列17个梁试件的受剪性能静力试验,对部分预制装配型钢混凝土(PPSRC)梁、空心部分预制装配型钢混凝土(HPSRC)梁的受弯性能以及处于正、负弯矩区段的部分预制装配型钢混凝土(PPSRC)梁和采用蜂窝型钢的部分预制装配型钢混凝土(PPCSRC)梁的受剪性能进行试验研究。结合与全现浇型钢混凝土(SRC)梁试件的比较分析,对制作方式、截面形式和现浇混凝土强度对PPSRC梁、HPSRC梁以及PPCSRC梁受力性能影响进行了分析。结果表明,文中提出的预制外壳能够很好地与现浇混凝土协同工作,浇筑方式及现浇混凝土强度对试件的承载力影响较小。基于试验结果提出适用于PPSRC梁及PPCSRC梁的实用抗剪公式,其计算结果与试验结果吻合较好。 On the basis of existing research on precast steel reinforced concrete (SRC) beams, three innovative kinds of RC beams, namely partially precast steel reinforced concrete (PPSRC) beams, hollow partially precast steel reinforced ~oncrete (HPSRC) beams and partially precast castellated steel reinforced concrete (PPCSRC) beams, are presented in ~his work. With the aim at investigating the flexural performance of PPSRC and HPSRC beams under sagging moment md shear performance of PPSRC and PPCSRC beams under sagging and hogging moment, static loading tests on 24 ~pecimens of 4 series were conducted. The effects of fabrication method, cross-sectional shape and strength of cast-in- ,lace concrete on the mechanical performance of PPSRC, HPSRC and PPCSRC beams were analyzed. Based on the test ~ esults, it can be concluded that the precast outer-shell collaboratively works with the cast-in-place concrete very well, md the fabrication method and strength of cast-in-place concrete may mildly affect the bearing capacity of specimens. inally, the practical formulas for calculating the shear capacity of PPSRC and PPCSRC beams are proposed, and the alculation results from the formulas agree well with those from the experiments.
作者 杨勇 薛亦聪 于云龙 邵永健 马宁 郭宇翔 杨洋 Yang Yong1 Xue Yicong1 Yu Yunlong1 Shao Yongjian2 Ma Ning1 Guo Yuxiang1 Yang Yangl(1. Xi'an University of Architecture & Technology, Xi'an 710055, China; 2. Suzhou University of Science & Technology, Suzhou 215009, Chin)
出处 《土木工程学报》 EI CSCD 北大核心 2018年第4期1-9,19,共10页 China Civil Engineering Journal
基金 国家自然科学基金(51478287 51578443 51778525) 国家重点研发计划(2016YFC0701400) 陕西省自然科学基金(2015JM5187)
关键词 预制装配结构 型钢混凝土梁 受弯性能 受剪性能 试验研究 prefabricated structures steel reinforced concrete beam flexural performance shear performance experimental study
  • 相关文献

参考文献4

二级参考文献32

  • 1蔡健,周靖,方小丹.钢筋混凝土框架抗震位移延性系数研究[J].工程抗震与加固改造,2005,27(3):2-6. 被引量:30
  • 2刘子金,姚远生.钢筋工程应大力发展专业化加工与配送技术[J].施工技术,2006,35(3):47-48. 被引量:8
  • 3毛志兵,于震平.绿色施工研究方向[J].施工技术,2006,35(12):108-111. 被引量:56
  • 4Tamboli A R. Handbook of structural steel connection design and details [M]. New York: McGraw- Hill, 1999.
  • 5Kanno R, Deierlein G G. Seismic behavior of composite (RCS) beam-column joint subassemblies [A]. Proceedings of the 1996 Engineering Foundation Conference on Composite Construction in Steel and Concrete Ⅲ [C]. Irsee, Germany, 1996,236-249.
  • 6Parra-Montesinos G, Wight J K. Modeling shear behavior of hybrid RCS beam-column connections [J]. Journal of Structural Engineering, ASCE, 2001, 127(1): 3-11.
  • 7Parra-Montesinos G G, Liang X. Towards deformation-based capacity design of RCS beam-column connections [J].Engineering Structures, 2003, 25(5): 681-690.
  • 8Miller D K. Lessons learned from the Northridge earthquake [J]. Engineering Structures, 1998, 20(4-6): 249-260.
  • 9闰长旺.钢骨超高强混凝土框架节点抗震性能研究[D].大连:大连理工大学,2009.
  • 10中华人民共和国行业标准.JGJ224-2010预制预应力混凝土装配整体式框架结构技术规程[S].北京:中国建筑工业出版社,2011.

共引文献452

同被引文献130

引证文献18

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部