摘要
航空发动机智能化及其他机械系统的智能化需要原位集成制造的传感器,为此研制了发动机涡轮叶片原位集成高温传感器。该高温传感器采用MEMS微制造工艺将厚度在微米量级的微小传感器原位集成在航空发动机涡轮叶片表面,利用微技术制造的传感器和标准的热电偶进行了一系列的高温测量试验和一系列细致的高温温度表征测量研究。该微制造工艺攻克了两项技术难关:曲表面的光刻技术和高温绝缘层的制作技术。涡轮叶片表面原位集成的微传感器不仅可以原位测量高达800℃的环境温度,并且具有很高的机械强度,可以承受高达40 g的振动和100 g的冲力。研究还表明,在高温测量环境下,高温测量精度和高温环境下的温度场(高温温度的空间分布与升温时间迟豫)密切相关。由于高温环境温度场的差异,可以产生高达10%的测量本征误差。
An embedded high temperature sensor for intelligent aero-engines and other intelligent mechanical systemshave been fabricated and characterized under various high temperature measurements. This high temperature sensor was built directly onto the aero-engine turbine blade surface by MEMS microfabrication technology. There are two main challenges for the sensor fabrication—the high temperature electrical insulation and the curved surface soft photolithography have been successfully resolved in our fabrication process. Our embedded high temperature sensor can measure up to 800 ℃ on the blade surface,and can stand for 40 g shakingand 100 g shocking test. We have conducted a series of delicate high temperature experiments and studied the accuracy and precision for high temperature characterization. Results show that temperature field（ space distribution and time delay of thetemperature ramping） in the high temperature system can cause an intrinsic error for high temperature measurements and can cause up to 10% of intrinsic system error regardless of the accuracy of the sensors being used.
出处
《传感技术学报》
CAS
CSCD
北大核心
2017年第9期1352-1358,共7页
Chinese Journal of Sensors and Actuators
基金
中国航空发动机集团商用发动机有限责任公司的大力支持和资助下完成的
关键词
传感器
高温测量
MEMS
微制造工艺
软光刻技术
铂金热电阻
sensor
MEMS
embedded fabrication
high temperature measurement
soft photolithography
platinum thermal resistor
