期刊文献+

余热排出系统管道热疲劳分析模型及寿命预测 被引量:1

Thermal Fatigue Analysis Model and Life Prediction of Pipe in Residual Heat Removal System
在线阅读 下载PDF
导出
摘要 余热排出系统管道发现的热疲劳裂纹问题关系到压水堆的安全。本文基于开源有限元软件Code_Aster,采用Lagoda-Macha-Sakane模型预测了余热排出系统管道材料304L不锈钢的疲劳寿命,并根据预测结果提出了改进的Lagoda-Macha-Sakane模型。采用改进的Lagoda-Macha-Sakane模型对余热排出系统管道的热疲劳寿命进行了预测,结果表明预测热疲劳寿命与试验热疲劳寿命吻合。 The thermal fatigue crack problem discovered in the pipes of residual heat removal systems was related to the safety of pressurized water reactors.In this paper,the fatigue life of the 304 Lstainless steel,which was the material of the pipes of residual heat removal systems,was predicted by using the Lagoda-Macha-Sakane's model in the open-source finite element software Code-Aster.Based on the result of fatigue life prediction,a modified Lagoda-Macha-Sakane's model was proposed.The thermal fatigue life of the pipes of residual heat removal systems was predicted by using the modified Lagoda-Macha-Sakane's model.The results show that the predicted thermal fatigue life is consistent with the experimental thermal fatigue life.
出处 《原子能科学技术》 EI CAS CSCD 北大核心 2016年第1期137-142,共6页 Atomic Energy Science and Technology
关键词 余热排出系统 304L不锈钢 疲劳分析模型 疲劳寿命预测 residual heat removal system 304Lstainless steel fatigue analysis model fatigue life prediction
  • 相关文献

参考文献15

  • 1BLONDET E, FAIDY C. High cycle thermal fatigue in French PWR[C] // Tenth International Conference on Nuclear Engineering. USA: American Nuclear Society, 2002.
  • 2CIPIERE M F, DUFF J A. Thermal fatigue experience in French piping: Influence of surface condition and weld local geometry[J]. Welding in the World, 2002, 46(1-2).. 23-27.
  • 3DAHLBERG M, NILSSON K F, TAYLOR N, et al. Development of a european procedure for assessment of high cycle thermal fatigue in light water reactors: Final report of the NgSC-thermal fatigue project[R]. Netherlands: [s. n. ], 2007.
  • 4METZNER K J, WILKE U. European THER FAT project: Thermal fatigue evaluation of pip ing system "Tee"-connections[J]. Nuclear Engi neering and Design, 2005, 235(2-4): 473-484.
  • 5STEPHAN J M, CURTIT F, VINDEIRINHO C, et al. Evaluation of the risk of damages in mixing zones: EDF R&D programme[C] // Proceedings of the ASME 2002 Pressure Vessels Piping Division Conference. Vancouver: American Society of Mechanical Engineers, 2002.
  • 6TAHERI S. Some advances on understanding of high cycle thermal fatigue crazing[J]. Journal ofPressure Vessel Technology, 2007, 129 ( 3 ) : 400-410.
  • 7SHAMSAEI N, FATEMI A, SOCIE D F. Mul tiaxial fatigue evaluation using discriminating strain paths[J]. International Journal of Fatigue, 2011, 33(4): 597-609.
  • 8LAGODA T, MACHA E, SAKANE M. Estimation of high temperature fatigue lifetime of SUS304 steel with an energy parameter in the critical plane[J]. Journal of Theoretical and Applied Mechanics, 2003, 41(1): 55-73.
  • 9LEI B M, TRAN V X, TAHERI S, et al. Toward consistent fatigue crack initiation criteria for 304L austenitic stainless steel under multi-axial loads[J].International Journal of Fatigue, 2015, 75: 57-68.
  • 10ITOH T, SAKANE M, OHNAMI M. High temperature multiaxial low cycle fatigue of cruciform specimen[J].Journal of Engineering Mate rials and Technology, 1994, 116(1): 90-98.

同被引文献7

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部