摘要
We constructed a 36-channel magnetocardiography（MCG） system based on low-Tc direct current（DC） superconducting quantum interference device（SQUID） magnetometers operated inside a magnetically shielded room（MSR）. Weakly damped SQUID magnetometers with large Steward–Mc Cumber parameter βc（βc≈ 5）, which could directly connect to the operational amplifier without any additional feedback circuit, were used to simplify the readout electronics. With a flux-to-voltage transfer coefficient V / Φ larger than 420 μV/Φ0, the SQUID magnetometers had a white noise level of about 5.5 f T·Hz-1/2when operated in MSR. 36 sensing magnetometers and 15 reference magnetometers were employed to realize software gradiometer configurations. The coverage area of the 36 sensing magnetometers is 210×210 mm2. MCG measurements with a high signal-to-noise ratio of 40 d B were done successfully using the developed system.
We constructed a 36-channel magnetocardiography（MCG） system based on low-Tc direct current（DC） superconducting quantum interference device（SQUID） magnetometers operated inside a magnetically shielded room（MSR）. Weakly damped SQUID magnetometers with large Steward–Mc Cumber parameter βc（βc≈ 5）, which could directly connect to the operational amplifier without any additional feedback circuit, were used to simplify the readout electronics. With a flux-to-voltage transfer coefficient V / Φ larger than 420 μV/Φ0, the SQUID magnetometers had a white noise level of about 5.5 f T·Hz-1/2when operated in MSR. 36 sensing magnetometers and 15 reference magnetometers were employed to realize software gradiometer configurations. The coverage area of the 36 sensing magnetometers is 210×210 mm2. MCG measurements with a high signal-to-noise ratio of 40 d B were done successfully using the developed system.
基金
Project supported by"One Hundred Persons Project"of the Chinese Academy of Sciences and the Strategic Priority Research Program(B)of the Chinese Academy of Sciences(Grant No.XDB04020200)
