摘要
为了精准、稳定地提取滚动轴承故障特征,提出了基于变分模态分解和奇异值分解的特征提取方法,采用标准模糊C均值聚类(fuzzy C means clustering,FCM)进行故障识别。对同一负荷下的已知故障信号进行变分模态分解,利用奇异值分解技术进一步提取各模态特征,通过FCM形成标准聚类中心,采用海明贴近度对测试样本进行分类,并通过计算分类系数和平均模糊熵对分类性能进行评价,将该方法应用于滚动轴承变负荷故障诊断。通过与基于经验模态分解的特征提取方法对比,该方法对标准FCM初始化条件不敏感,在同负荷故障诊断中表现出更好的分类性能;变负荷故障诊断时,除外圈故障特征线发生明显迁移,其他测试样本故障特征线仍在原聚类中心附近,整体故障识别率保持在100%,因此,该方法能精确、稳定提取故障特征,为实际滚动轴承智能故障诊断提供参考。
In order to extract fault features of rolling bearing precisely and steadily, a method which is based on variational mode decomposition（VMD） and singular value decomposition was proposed for fault diagnosis using standard fuzzy C means clustering（FCM）. First of all, the known fault signals measured in the same load but with different faults were decomposed by VMD, and the modes＇ characteristics were further extracted using singular value decomposition technique, forming the standard clustering centers by FCM, and then the test samples were clustered by a Hamming nearness approach, and the classification performance was evaluated by calculating classification coefficient and average fuzzy entropy. At last, the method was applied in rolling bearing fault diagnosis under variable loads. By comparing with a method based on EMD, this approach is not sensitive to the initialization of standard FCM, and exhibits better classification performance in the same load fault diagnosis; For the variable loads, the fault characteristic lines of test samples are still around the former clustering centers except that the ones of outer race fault sample have migrated obviously. However, the overall classification accuracy is still maintained 100%, therefore, the method proposed can extract the fault features accurately and stably, providing a good reference for the actual rolling bearing intelligent fault diagnosis.
出处
《中国电机工程学报》
EI
CSCD
北大核心
2015年第13期3358-3365,共8页
Proceedings of the CSEE
基金
中央高校基本科研业务费专项资金资助(13MS102
2014xs89)~~
关键词
变分模态分解
特征提取
模糊聚类
滚动轴承
故障诊断
variational mode decomposition
feature extraction
fuzzy clustering
rolling bearing
fault diagnosis
