期刊文献+

Effects of pre-aging treatment on subsequent artificial aging characteristics of Al-3.95Cu-(1.32Mg)-0.52Mn-0.11Zr alloys

Effects of pre-aging treatment on subsequent artificial aging characteristics of Al-3.95Cu-(1.32Mg)-0.52Mn-0.11Zr alloys
在线阅读 下载PDF
导出
摘要 The effects of pre-aging treatments on subsequent artificial aging response were investigated by means of transmission electron microscopy observations and hardness test in age hardened Al-3.95Cu-(1.32Mg)-0.52Mn-0.11 Zr alloys. In Al-3.95Cu-0.52Mn-0.11 Zr alloy, when the pre-aging temperature is 25 °C, the pre-aging treatment has no evident effect on the peak hardness of subsequent artificial aging, while a positive effect(increase of peak hardness) appears when pre-aging temperature is50 °C. However, in Al-3.95Cu-1.32Mg-0.52Mn-0.11 Zr alloy, it is found that whether the pre-aging temperature is 25 °C or 50 °C,the peak artificial aging hardness is lower than that of T6 treated alloy, that is to say, pre-aging treatment has a negative effect on the peak hardness of subsequent artificial aging in the alloys. The effects of pre-aging treatments on subsequent artificial aging response were investigated by means of transmission electron microscopy observations and hardness test in age hardened Al-3.95Cu-(1.32Mg)-0.52Mn-0.11 Zr alloys. In Al-3.95Cu-0.52Mn-0.11 Zr alloy, when the pre-aging temperature is 25 °C, the pre-aging treatment has no evident effect on the peak hardness of subsequent artificial aging, while a positive effect(increase of peak hardness) appears when pre-aging temperature is50 °C. However, in Al-3.95Cu-1.32Mg-0.52Mn-0.11 Zr alloy, it is found that whether the pre-aging temperature is 25 °C or 50 °C,the peak artificial aging hardness is lower than that of T6 treated alloy, that is to say, pre-aging treatment has a negative effect on the peak hardness of subsequent artificial aging in the alloys.
出处 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第1期1-7,共7页 中南大学学报(英文版)
基金 Project(2006AA03Z517)supported by the National High-tech Research and Development Program of China Project(CSUZC2013019)supported by Open Fund for the Precision Instruments of Central South University,China
关键词 Al-Cu-(Mg) alloy pre-aging treatment precipitation aging hardening curve 人工时效 时效处理 锆合金 时效特性 透射电子显微镜 时效温度 测试方法 T6处理
  • 相关文献

参考文献2

二级参考文献26

  • 1姜锋,尹志民,黄伯云,贺跃辉,陈苏里.Homogenization and Recrystallization of Al-6Mg Alloys with and without Sc and Zr[J].Journal of Rare Earths,2004,22(5):600-603. 被引量:12
  • 2徐崇义,李念奎.2×××系铝合金强韧化的研究与发展[J].轻合金加工技术,2005,33(8):13-17. 被引量:39
  • 3K.H. Rendings: Mater. Sci. Forum, 1997, 242, 11.
  • 4J. Chaudhurl, Y.M. Tan, V. Gondhalekar and K.M Patni: J. Mater. Eng. Perform., 1994, 3(3), 371.
  • 5H. Uchida, H. Yoshida, H. Hira and T. Amano: Mater. Sci. Forum, 1996, 217-222, 1753.
  • 6S.C. Bergsma and M.E. Kassner: Mater. Sci. Forum, 1996, 217-222, 1801.
  • 7K. Matsuda, T. Kawabata, Y. Uetani and S. Ikeno: Mater. Sei. Forum, 2003, 426, 375.
  • 8S. Esmaeili, X. Wang, D.J. Lloyd and W.J. Poole: Metall. Mater. Trans. A, 2003, 34(3), 751.
  • 9F. Delmas, M. J. Casanove, P. Lours, A. Couret and A. Coujou: Mater. Sci. Eng. A, 2004, 373, 80.
  • 10D.J. Chakrabarti and D.E. Laughlin: Prog. Mater. Sci., 2004, 49, 389.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部