期刊文献+

某82mm口径迫弹力学参数分布特性研究 被引量:2

The Study on Distribution Characteristics of an 82 mm Caliber Mortar Projectile's Mechanics Parameters
在线阅读 下载PDF
导出
摘要 针对弹丸结构特征数计算只能得到平均值而不能得到极限值、偏心距数值计算问题未见有研究文献,进而无法准确分析弹丸外弹道飞行运动特别是引信设计所关注的极限弹道环境问题,提出了利用弹丸力学参数实测数据拟合其数学分布并进一步研究其分布特性的方法。某82 mm口径迫弹五种力学参数均不符合正态分布,其中轴向质心位置和极转动惯量也不符合Weibull分布,但弹丸偏心距、质量和赤道转动惯量服从三参数Weibull分布,且偏心距还进一步服从Rayleigh分布。 In view of problems that limit values of projectile' s structural characteristic parameters and eccentricity can' t be calculated, pro- jectile motion in external trajectory, especially the limited ballistic environment which is important for fuze design can' t be analyzed accu- rately, the method of fitting and resea ching mathematical distribution of projectile' s mechanics parameters according to the measured data was proposed here. A 82 mm-caliber mortar projectile' s five kinds of mechanics parameters do not obey normal distribution. Axial centroid position and polar moment of inertia do not obey Weibull distribution either. But eccentricity, mass and moment of inertia of the equator o- bey three-parameter Weibull distribution, and eccentricity further obeys Rayleigh distribution.
出处 《弹箭与制导学报》 CSCD 北大核心 2014年第4期73-77,共5页 Journal of Projectiles,Rockets,Missiles and Guidance
关键词 弹药工程 力学参数分布 数理统计 结构特征数 偏心距分布 ammunition engineering mechanics parameters distribution mathematical statistics structural characteristics parameters eccentricity distribution
  • 相关文献

参考文献16

  • 1华恭,欧林尔.弹丸作用和设计理论[M].北京:国防工业出版社,1975,156-185.
  • 2魏惠之.计算弹丸结构特征数的两种新方法[J].兵工学报:弹箭分册,1981(4):1-8.
  • 3孙瑞书,谭凤翔.计算弹丸特征量的普遍公式[J].兵工学报,1983,4(1):60-64. 被引量:2
  • 4吴子明.平截正圆锥法--计算弹丸结构特征数方法[J].兵工学报:弹箭分册,1984(4):53-62.
  • 5王晓呜.弹丸结构特征数三维计算方法[J].兵工学报(弹箭分册),1990(3):57-63. 被引量:3
  • 6黄德武,谷耀新.用等参元方法计算弹丸结构特征数[J].沈阳理工大学学报,1990,0(3):27-34. 被引量:2
  • 7张元军.弹丸结构特征数的计算方法[J].四川兵工学报,2008,29(4):47-48. 被引量:2
  • 8国防科学技术工业委员会.QJ 1172A-1997导弹、火箭质量特性测量规范[S].北京:中国航天科技标准化研究所,1997.
  • 9中国工程物理研究院.GJB 3004-1997核弹头质量质心测量方法[S].北京:国防科学技术工业委员会,1997.
  • 10长春试验机研究所等.GB/T 9239.1-2006机械振动恒态(刚性)转子平衡品质要求[S].北京:中国标准出版社,2007.

二级参考文献34

共引文献127

同被引文献15

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部