期刊文献+

对位芳纶沉析纤维及其纸基材料性能的研究 被引量:10

Study on the Properties of Para Aramid Fibrid and PPTA Paper
在线阅读 下载PDF
导出
摘要 采用扫描电子显微镜、比表面积仪、纤维形态分析仪、X射线衍射仪等对比分析了对位芳纶沉析纤维和对位芳纶浆粕纤维的微观形貌、形态参数、结晶结构以及成纸性能。实验表明,与对位芳纶浆粕纤维相比,对位芳纶沉析纤维呈非粒状且尺寸较小,外形上既像皱膜又像薄片,表面活性高,比表面积大,达到7.35 m2/g;纤维细碎化程度高,长度均一性好,柔软性好,强韧性高;结晶度为28.55%,具备细微丝晶结构,有利于成纸的匀度和强度;配抄成纸机械强度和电气性能均高于对位芳纶浆粕纤维配抄的纸。 This article analyzed and compared the morphology,crystal structure and morphological parameters of the para aramid pulp fibers and the fibrids as well as the properties of the papers made of the pulp fibers and fibrids by scanning electron microscopy,surface area analyzer,fiber morphology analyzer,X-ray diffraction and other modern instruments.It was found that compared with the pulp fibers,fibrid was non-granular and smaller in size,it had the shape like a slice or wrinkled membrane,with large surface area,to 7.35 m2/g,and high surface activity; fibrid crushing a high degree of uniformity,with good length distribution,softness,and high strength and toughness; fibrid crystallinity was 28.55%,with small grain size,it had fine silk crystal structure and it was conducive to the formation and strength of the paper; the mechanical strength and the electrical properties of fibrid paper was higher than PPTA pulp paper.
机构地区 陕西科技大学
出处 《中国造纸》 CAS 北大核心 2014年第3期22-26,共5页 China Pulp & Paper
基金 国家高技术研究发展计划(863)重大项目(2012AA-03A208) 陕西省科技统筹创新工程计划项目(2011ktcg01-19) 陕西省工业攻关项目(2011K08-08)
关键词 对位芳纶 沉析纤维 浆粕纤维 纤维特性 成纸性能 para aramid pulp fibrids properties of fibers properties of paper
  • 相关文献

参考文献12

  • 1Nomex paper and pressboard : a range of engineering materials, Tech- nical data sheet of Dupont. www. dupont, com.
  • 2Long Han. Study of the rheological properties of Nomex fibrids [ D ]. College of Engineering and Mineral Resources at West Virginia Uni- versity, 2001.
  • 3李金宝,张美云,吴养育,修慧娟.间位与对位芳纶纤维造纸性能比较[J].纸和造纸,2005,24(5):76-79. 被引量:14
  • 4Jiang Wang, Ping Chen, Hong Li, et al. Surface characteristic of po- ly( p-phenylene terephtha-lamide)fibers with oxygen plasma treatment [J]. Surface and Interface Analysis, 2008, 40: 1299.
  • 5赵会芳,张美云,路金杯.芳纶1313浆粕结构形态及其对成纸性能的影响[J].中国造纸,2010,29(2):1-5. 被引量:28
  • 6Zhang Mei Yun, Huang Rui, Yang Bin, et al. Effect of PPTA Fiber Morphology on the Performance of Paper-Based Functional Materials [ J]. Advanced Materials Research, 2011, 236/238 : 1453.
  • 7王曙中.芳纶浆粕和芳纶纸的发展概况[J].高科技纤维与应用,2009,34(4):15-18. 被引量:21
  • 8孙智华,唐爱民.对位芳纶浆粕结构及性能的表征[J].中国造纸,2008,27(10):22-26. 被引量:14
  • 9Gyeong-Yun Kim, Martin A. Hubbe Engineering of a Wet-End Addi- tives Program Relative to Process Parameters and to the Physical and Optical Properties of Filled Paper[ J ]. Ind. Eng. Chem. Res. , 2010, 49(12) : 5644.
  • 10Anthony P Gies, Michal Kliman. Charaeterization of Branching in Aramid Polymers Studied by MALDI-Ion Mobility/Mass Spectrome- try[J]. Macromolecules, 2008, 41, 8299.

二级参考文献41

共引文献96

同被引文献141

引证文献10

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部