期刊文献+

Al-4.3Zn-1.4Mg合金均匀化处理工艺研究

Homogenization treatment of Al-4.3Zn-1.4Mg aluminum alloy
在线阅读 下载PDF
导出
摘要 采用光学显微镜、差热分析、扫描电镜、能谱分析,研究了Al-4.3Zn-1.4Mg合金的铸态组织以及铸锭经不同均匀化制度处理后的微观组织。结果表明,Al-4.3Zn-1.4Mg合金的铸态组织中主要存在T相、Mg2Si相和AlFeMn相三种结晶相;铸锭过烧温度为479℃;铸锭经均匀化处理后,T相及Mg2Si相均回溶入基体,而主要含AlFeMn的过剩结晶相仅发生部分溶解。 The casting microstructure and microstructure after the billet being homogenized with different processes have been investigated by optical microscope,differential scanning calorimeter and energy spectrometer;the results show that in the casting microstructure of Al-4.3Zn-1.4Mg alloy billet exist three crystal phases,as T phase,Mg2Si and AlFeMn phase.The overheat temperature is 479℃;T phase and Mg2Si phase re-smelted into the base;but the excess crystal phase containing AlFeMn re-smelted only partially.
出处 《轻合金加工技术》 CAS 北大核心 2010年第12期13-16,共4页 Light Alloy Fabrication Technology
基金 国家高技术研究发展计划项目(2008AA030701)
关键词 AL-ZN-MG合金 均匀化 铸态组织 回溶 Al-Zn-Mg alloy homogenization as-cast microstructure re-dissolution
  • 相关文献

参考文献2

二级参考文献15

  • 1王晨,周静,杨志峰,邹本杰.7050铝合金铸锭均匀化过程中相的转变[J].轻合金加工技术,2007,35(1):23-24. 被引量:24
  • 2[3]中南大学.上海磁浮列车研究报告[R].长沙:中南大学,2003.
  • 3[6]Dukkipati R V. Lateral stability analysis of a railway truck on roller rig[J]. Mechanism and Machine Theory, 2001,36 (2):189-204.
  • 4Li X M, Starink M J. Effect of compositional variations on characleristics of coarse intermetallic particles in overaged 7000 aluminum alloys[J]. Materials Science and Technology, 2001,17(11) : 1324- 1328.
  • 5Xie F Y, Yan X Y, Ding L, et al. A study of microstructure and microsegregation of aluminum 7050 alloy[J]. Materials Science and Engineering : A, 2003,355:144- 153.
  • 6Mondolfo L F. Aluminum alloys: structure and properties [ M]. London: Butter Worth Publication, 1976 : 842 - 844.
  • 7Tenzler U, Cyrener E, Tempus G. Experimental results on phase dissolution and homogenization in continuously cast AlZnMgCu alloys[J]. Aluminum, 1999,75(6):524-530.
  • 8Robson J D. Optimizing the homogenization of zirconium containing commercial aluminum alloys using a novel process model[J]. Materials Science and Engineering: A, 2002, 338:219- 229.
  • 9Sachs G, Van Horn K R. Practical metallurgy [ M ]. Cleveland: ASM, 1944:46- 47.
  • 10Polmear I J. Light alloys [ M]. London: Edward Arnold, 1981:51 - 52.

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部