摘要
采用37μm不锈钢粉末,通过添加1%～10%的粒度为10μm左右的造孔剂进行实验,通过实验研究造孔剂含量对高过滤效率多孔金属材料孔径及透气度的影响。
Porous materials were prepared by employed -400 stainless steel power with adding 1%～10% 10 μm pore formers in this paper. The effect of pore formers on aperture and air permeability of porous materials with high filtration efficiency was studied.
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2008年第A04期638-641,共4页
Rare Metal Materials and Engineering
关键词
粉末冶金
过滤器
多孔材料
造孔剂
powder metallurgy filter porous materials pore former
