期刊文献+

跨声速离心压气机叶尖区旋涡流动特征 被引量:7

Vortex flows in the blade tip region of a transonic centrifugal compressor
原文传递
导出
摘要 车用增压器高压比的发展趋势,使得跨声速离心压气机叶尖区流动对气动性能影响更为重要。采用三维CFD方法,研究了跨声速离心压气机叶尖区流动对性能的影响。结果表明:额定、近失速和堵塞工况的激波呈现多样性;额定和近失速工况主叶片前缘发出的泄漏涡与相邻主叶片压力面相撞分裂成两支,堵塞工况主叶片的泄漏涡出现在压力面侧;3种工况分流叶片泄漏涡与主叶片的泄漏涡均在同一通道流出叶轮;1/2主叶片弦长之后,3工况的分离旋涡与通道涡的尺度和分布特征基本相同,叶片吸力面与机匣相交的角区形成高损失核心区。对激波结构和旋涡特征的分析有助于认识叶轮内损失分布规律和产生损失的机理。 The blade tip region clearance flow is important in centrifugal compressors, especially for the high charging ratio, transonic centrifugal compressors used in vehicles. The effects of the blade tip region flow on the performance of a high charging ratio transonic centrifugal compressor were analyzed using three-dimensional CFD analyses that showed the shock waves at the design, near surge, and choke points. At the design and near surge points, the leakage vortex from the full blade leading edge collides with the neighboring full blade pressure surface and splits into two parts while at the choke point, a full blade leakage vortex appears on the pressure surface. At different operating points, splitter blade vortices and full blade vortices flow out in the same blade passage, with the separated vortex and passage vortex dimensions and distribution characteristics being similar and with high losses in the corner region between the blade suction surface and the shroud.
出处 《清华大学学报(自然科学版)》 EI CAS CSCD 北大核心 2008年第11期1980-1984,共5页 Journal of Tsinghua University(Science and Technology)
基金 中国博士后基金资助项目(20060400088) 重点实验室基金项目(9140C3301020601)
关键词 增压器 跨声速离心压气机 叶尖间隙 泄漏涡 turbocharger transonic centrifugal compressor tipclearance leakage vortex
  • 相关文献

参考文献11

  • 1WeiB C, Grates D R. Numerical investigation of the influence of the tip clearance on wake formation inside a radial impeller [C]//Proceedings of ASME Turbo Expo 2003 Power for Land, Sea, and Air. Atlanta, 2003.. GT2003-38279.
  • 2Farge T Z, Johnson M W, Maksoud T M. Tip leakage in a centrifugal impeller [J]. AS ME Journal of Turbomaehinery, 1989, 111: 244- 249.
  • 3Ishdia M, Ueki H, Senoo Y. Effect of blade tip configuration on tip clearance loss of a centrifugal impeller [J]. ASME Journal of Turbomachinery, 1990, 112(1) : 14 - 18.
  • 4杜建一,汤华,赵晓路,徐建中.叶顶间隙对离心压气机性能影响的研究[J].工程热物理学报,2006,27(4):583-585. 被引量:24
  • 5彭森,杨策,马朝臣,王航.前倾角对离心压气机叶轮性能的影响[J].清华大学学报(自然科学版),2005,45(2):250-253. 被引量:13
  • 6彭森,杨策,马朝臣.离心压气机叶尖间隙泄漏流动数值研究[J].工程热物理学报,2005,26(6):935-937. 被引量:15
  • 7刘瑞韬,徐忠,孙玉山.含分流叶片的离心压缩机级内三维流场数值分析[J].应用力学学报,2004,21(1):80-83. 被引量:11
  • 8Swanson R C, Turkel E. Artificial dissipation and central difference schemes for the Euler and Navier-Stokes equations [C]//AIAA Paper 87 1107, 1987.
  • 9Jameson A, Schmidt W, Turkel E. Numerical solutions of the Euler equations by finite volume methods using Runge-Kutta time stepping schemes [C]//AIAA Paper 81-1259.
  • 10Spalart P R, Allmaras S R. A one equation turbulence model for aerodynamic flows [C]//AIAA Paper 92-0439.

二级参考文献18

  • 1杨策 张虹 马朝臣.离心压气机叶轮设计方法研究 [A]..中国工程热物理学会第十届年会热机气动热力学论文集 [C].青岛,2001.148-154.
  • 2Krain H. A CAD method for centrifugal compressor impellers [J]. Trans ASME, J Eng for Gas Turbines and Power, 1984, 106(2): 150-157.
  • 3Bruce G J, Masme M. Computer-Aided Turbomachinery Design System [R]. IMechE, 1998, C554/026/98.
  • 4Zangeneh M, Goto A, Harada H. On the Design Criteria for Suppression of Secondary Flows in Centrifugal and Mixed Flow Impellers [R]. ASME Paper, 1997, 97-GT-393.
  • 5Zangeneh M. On 3D Inverse Design of Centrifugal Compressor Impellers with Splitter Blades [R]. ASME Paper, 1998, 98-GT-507.
  • 6Zangeneh M. On the Design Criteria for Suppression of Secondary Flow in Centrifugal and Mixed Flow Impellers [R]. ASME Paper, 1997, 97-GT-393.
  • 7徐忠.离心压缩机原理[M].机械工业出版社,1988..
  • 8S Kang, C Hirch. Experimental Study on the Three-Dimensional Flow Within a Compressor Cascade with Tip Clearance: Part I-Velocity and Pressure Field.ASME Journal of Turbomachinery, 1993, 115(3): 435-443.
  • 9S Kang, CHirch. Numerical Simulation of Three-Dimensional Viscous Flow in a Linear Compressor Cascade with tip Clearance. ASME Journal of Turbomachinery, 1996, 118:492-505.
  • 10S Kang, C Hirch. Tip Leakage Flow in Linear Compressor Cascade. ASME Journal of Turbomachinery, 1994,116:657-664.

共引文献53

同被引文献63

引证文献7

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部