期刊文献+

热拉伸变形对AZ31B镁合金薄板显微组织的影响 被引量:3

Influence of thermal tensile deformation on microstructure of AZ31B magnesium alloy thin sheet
在线阅读 下载PDF
导出
摘要 利用单向热拉伸实验和金相显微镜研究了AZ31B镁合金薄板热变形过程及其动态再结晶组织变化规律。结果表明,在变形温度为160℃、应变速率为1×10-3s-1时,拉伸变形后得到的显微组织是混合组织。260℃~280℃时形成均匀分布的细小等轴晶粒,其晶粒平均尺寸为5μm左右。在变形温度为320℃~400℃、变形速率为1×10-3s-1~3.3×10-4s-1时,晶粒平均尺寸为10μm^20μm,沿晶界出现氧化现象,且氧化"黑色"斑点发生聚集。 Thermal deformation process and dynamic recrystallization structure change rules of AZ31B magnesium alloy thin sheet were investigated by uniaxial thermal tension and metalloscope.The results showed that the mixed grain microstructure can be obtained when the uniaxial tensile test was conducted under 160℃ at 1×10^-3s^-1.The alloy consists of equal and refined equiaxed grains during temperature 260℃-280℃,the average grain sizes are about 5μm.The average grain sizes are about 10μm-20μm in 1×10^-3s^-1-3.3×10^-4s^-1 and deformation temperature 320℃-400℃,oxidation were appeared along the boundaries of grains and oxidation macula "Black" were massed.
出处 《塑性工程学报》 EI CAS CSCD 北大核心 2008年第4期167-170,共4页 Journal of Plasticity Engineering
基金 国家自然科学基金资助项目(50774037) 江苏大学项目(05JDG009)
关键词 镁合金 再结晶 热拉伸 微观组织 magnesium alloy recrystallization thermal tensile microstructure
  • 相关文献

参考文献15

二级参考文献63

  • 1严巍,陈国学.轴对称压缩流动应力-应变曲线有限元修正方法的研究[J].塑性工程学报,2004,11(4):19-21. 被引量:8
  • 2郭强,张辉,陈振华,严红革,夏伟军,傅定发.AZ31镁合金的高温热压缩流变应力行为的研究[J].湘潭大学自然科学学报,2004,26(3):108-111. 被引量:20
  • 3夏长清,武文花,吴安如,王银娜.Mg-Nd-Zn-Zr稀土镁合金的热变形行为[J].中国有色金属学报,2004,14(11):1810-1816. 被引量:36
  • 4蒋树农,刘楚明,李慧中,张新明.高纯多晶铝的动态再结晶[J].中南大学学报(自然科学版),2004,35(6):935-940. 被引量:8
  • 5卡恩RW 哈森 克雷默 丁道云 译.材料科学与技术丛书(第8卷)[M].北京:科学出版社,1999..
  • 6B L Mordike, T Ebert. Magnesium propertiesapplications-potential [J]. Material Science and Technology, 2001,A302: 37-45.
  • 7TAKUDA H. Modeling on flow stress of Mg-Al-Zn alloys at elevated temperatures [J]. J of Mater Proc Tech, 1998,80-81:513-516.
  • 8VAGARALI S S. Deformation mechanisms in H. C. P metals at elevated temperatures-I creep behavior of magnesium[J]. Acta Metal, 1981,29 : 1969-1982.
  • 9Park N K, Yeom J T, Na Y S. Characterization of deformation stability in hot forging of conventional Ti-6Al4V using processing maps[J]. Journal of Materials Processing Technology, 2002, 130- 131: 540- 545.
  • 10Sivakesavam O, Prasad Y V R K. Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy[J]. Mater Sci Eng A, 2002, A323: 270-277.

共引文献307

同被引文献18

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部