期刊文献+

含癸二酰胺的共聚酰胺固化剂的合成及性能 被引量:2

The synthesis of copolyamide curing agents using dimer acid and sebacic acid and the performance of epoxy resins cured using it
在线阅读 下载PDF
导出
摘要 用癸二酸和二聚酸与多胺共缩聚合成了含癸二酰胺的共聚酰胺固化剂,研究了癸二酸加入量对合成固化剂胺值、粘度的影响,及对固化剂与环氧树脂E-44混合体系力学性能的影响。加入癸二酸后,树脂粘度有大幅度的下降,但癸二酸的加入量超过5%以后,合成的共聚酰胺固化剂粘度逐渐增加;产物的胺值与E-44的固化体系的固化度、拉伸强度和剪切强度都随癸二酸加入量的提高而提高。其凝胶时间缩短,比较发现,当癸二酸加入量为二聚酸加入量的20%时,与四乙烯五胺合成的固化剂各方面性能较好,其体系的粘度为二聚酸性聚酰胺的80%左右。在酸组分不变的情况下,混合体系的裂解温度随胺分子质量的增加而下降,失重率则相反。 The copolyamide curing agents were prepared by dimer acid,sebacic acid,and polyamines.The effect of usage of sebacic acid on value of amine and viscosity of the production and the performance of epoxy resin cured using it were also studied.The tests showed that with increasing the mass fraction of sebacic acid the viscosity of the product decreased greatly but increased progressively when the mass fraction of sebacic acid was more than 5%;amine value of the product and the curing degree,tensile and shear strength of epoxy resins cured using it increased but its gel time decreased.By comparison,the polyamide curing agent with better performance in every aspect was synthesized when the usage of sebacic acid was 20 percent of that of dimer acid and its viscosity was about 80% of that of dimer based polyamide.In the condition of the same acid component,as the molecule mass of polyamines increased,the pyrolysis temperature decreased and the weight losing percentage increased.
出处 《热固性树脂》 CAS CSCD 2007年第5期11-14,共4页 Thermosetting Resin
关键词 二聚酸 癸二酸 聚酰胺 固化剂 环氧树脂 dimer acid sebacic acid polyamide curing agents epoxy resins
  • 相关文献

参考文献11

  • 1George Smith,Charles R Frihart.One-component,curable epoxy/polyamide resin dispersions with enhanced stability containing one or more amino acid:US,5428083[P].1995-06-27.
  • 2Ralph D Hermansen,Steven E Lan.Encapsulant of amine-cured epoxy resin blends:US,5457165[P].1995-10-10.
  • 3Frederick Herbert Walker,William Edward Starner.Polyamide curing agents based on mixture of polyethyleneamines and piperazine derivatives:US,6008313[P].1999-12-28.
  • 4夏建陵,聂小安,张燕,陈瑶,王定选.新型聚酰胺/环氧固化体系性能的研究[J].热固性树脂,2004,19(5):27-28. 被引量:7
  • 5Larry Steven Corley.Epoxy resin system:US,6500912B1[P].2002-12-31.
  • 6Steven Lee Stewart,Derek Scott Kincaid.Adhesive of epoxy resin amine-terminated polyamide and polyamine:US,6136944[P].2000-10-24.
  • 7Larry Steven Corley,Martin L Ehrlich.Epoxy resin system:US,6274682B1[P].2001-08-14.
  • 8Larry Steven Corley,Derek Scott Kincaid,Glenda Carole Young.Aqueous dispersions of polyamide-amine derived from aminonalkylpiperazine with epoxy resin:US,5998508[P].1999-17-07.
  • 9Larry Steven Corley,Derek Scott Kincaid,Glenda Carole Young.Coating of impregnant of epoxy resin and aqueous polyamide-amine dispersion:US,6013757[P].2000-01-11.
  • 10孙曼灵,郑高锋.胺类环氧固化剂胺值测定方法的探讨[J].热固性树脂,2006,21(2):30-32. 被引量:50

二级参考文献3

共引文献61

同被引文献15

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部