期刊文献+

Aging behavior of AlNp/2024Al composites fabricated by squeeze casting 被引量:1

Aging behavior of AlNp/2024Al composites fabricated by squeeze casting
在线阅读 下载PDF
导出
摘要 2024 aluminum matrix composites reinforced with different size AlN particles (0.5, 4 and 10μm) were fabricated by the squeeze-casting technology. The aging behavior and microstructure of AlNp/2024Al composites were investigated by Brinell hardness measurement and transmission electron microscopy (TEM). The results show that the precipitation sequence of AlNp/2024Al composites is similar to that of the matrix alloy aged at 160 and 190℃, but the age hardening rate of composites is improved, and the AlN particles with large size promote the precipitation process more obviously, in comparison with smaller AlN particles. With increasing temperature, the precipitation processes are accelerated, and the time to reach the peak hardness is shortened. The acceleration of the formation of GP region and phase S' in the composites is attributed to the interfaces (between particles and the matrix) and the high density of dislocations introduced by addition of AlN particles. 2024 aluminum matrix composites reinforced with different size AIN particles (0.5, 4 and 10 μm) were fabricated by the squeeze-casting technology. The aging behavior and microstructure of AINp/2024AI composites were investigated by Brinell hardness measurement and transmission electron microscopy (TEM). The results show that the precipitation sequence of AINJ2024AI composites is similar to that of the matrix alloy aged at 160 and 190 ℃, but the age hardening rate of composites is improved, and the AIN particles with large size promote the precipitation process more obviously, in comparison with smaller AIN particles. With increasing temperature, the precipitation processes are accelerated, and the time to reach the peak hardness is shortened. The acceleration of the formation of GP region and phase S' in the composites is attributed to the interfaces (between particles and the matrix) and the high density of dislocations introduced by addition of AIN particles.
出处 《中国有色金属学会会刊:英文版》 CSCD 2006年第A03期1450-1454,共5页 Transactions of Nonferrous Metals Society of China
基金 Projects(59771014 50071019) supported by the National Natural Science Foundation of China
关键词 时效 金属加工 铸造工艺 aluminum alloy metal matrix composite AIN particle squeeze casting aging behavior
  • 相关文献

参考文献18

  • 1RINGER S P,SAKURAI T,POLMEAR I J.Origins of hardening in aged Al-Gu-Mg-(Ag) alloys[J].Acta Mater,1997,45(9):3731-3744.
  • 2SHARMA S C,SHANTA S C,KRISHNA M.Effect of aging parameters on the microstructure and properties of ZA-27/aluminite metal matrix composites[J].J Alloys Compd,2002,346(1):292-301.
  • 3MURATOGLU M,YILMAZ O,AKSOY M.Investigation on diffusion bonding characteristics of aluminum metal matrix composites (Al/SiCp) with pure aluminum for different heat treatments[J].J Mater Process Technol,2006,178(1/3):211-217.
  • 4HASSELMAN D P H,LLOYD F J.Effective of thermal conductivity of composites with interfacial thermal barrier resistance[J].J Composites,1987,21 (6):508-515.
  • 5SARASWATI R,POLESE F J.Aluminum matrix composite heat sinks for microchips and microcircuits[A].Proceedings of 1998 International Symposium on Microelectronics[C].California,1998:681-686.
  • 6DAOUD A,REIF W.Influence of Al2O3 particulate on the aging response of A356 Al-based composites[J].J Mater Process Technol,2006,123(2):313-318.
  • 7RINGER S P,HONO I J,POLMEAR I J,SAKURAI T.Nucleation of precipitates in aged Al-Gu-Mg-(Ag) alloys with high Cu[J].Acta Mater,1996,44(5):1883-1898.
  • 8YUCEL B,MIROSLAV K.The interaction of natural ageing with straining in a twin-roll cast AlMgSi automotive sheet[J].Scripta Mater,2006,55(7):625-628.
  • 9ABDEL-AZIM A N,SHASH Y,MOSTAFA S F,YOUNAN A.Ageing behavior of 2024-Al alloy reinforced with Al2O3 particles[J].J Mater Process Technol,1995,55(3/4):140-145.
  • 10CAMPO M,URENA A,RAMS J.Effect of silica coatings on interfacial mechanical properties in aluminium-SiC composites characterized by nanoindentation[J].Scripta Mater,2005,52(10):977-982.

同被引文献17

  • 1王秀芳,武高辉,姜龙涛,耿洪滨.冷热循环处理对SiCp/2024Al尺寸稳定性的影响[J].材料热处理学报,2006,27(1):23-27. 被引量:13
  • 2陈国钦,姜龙涛,武高辉,朱德志,修子扬.Fabrication and characterization of high dense Mo/Cu composites for electronic packaging applications[J].中国有色金属学会会刊:英文版,2007,17(A01):580-583. 被引量:3
  • 3Chong-Sung Park,Myung-Ho Kim,Chongmu Lee.A theoretical approach for the thermal expansion behavior of the particulate reinforced aluminum matrix composite Part I A thermal expansion model for composites with mono-dispersed spherical particles[J]. Journal of Materials Science . 2001 (14)
  • 4S. Mitra,I. Dutta,R. C. Hansen.Thermal cycling studies of a cross-plied P100 graphite fibre-reinforced 6061 aluminium composite laminate[J]. Journal of Materials Science . 1991 (22)
  • 5MOLINA J M,NARCISO J,WEBER L,MORTENSEN A,LOUIS E.Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution. Journal of Materials Science . 2008
  • 6HSIEH C L,YUAN W H.Thermal expansion behavior of a model ceramic-metal composite. Journal of Materials Science . 2007
  • 7CHEN N,ZHANG H X,GU M Y,JIN Y P.Effect of thermal cycling on the expansion behavior of Al/SiCp composite. Journal of Materials . 2009
  • 8WU G H.A submicro particulate reinforced aluminum matrix composites and fabrication method. ZL94117266.X . 1994
  • 9CARRE-O-MORELLI E,URRETA S E,SCHALLER R.Mechanical spectroscopy of thermal stress relaxation at metal-ceramic interfaces in aluminium-based composites. Acta Materialia . 2000
  • 10A. Rotta,R. E. Bolmaro.An Eshelby Inclusion-Based Model for the Study of Stress and Plastic Strain Localization in Metal Matrix Composite I: Generational Formation and Its Application to Round Particle. Journal of Materials Science . 1997

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部