期刊文献+

(Bi_2Te_3)_(0.90)(Sb_2Te_3)_(0.05)(Sb_2Se_3)_(0.05)熔炼冷压烧结材料的制备及其热电性能的研究 被引量:1

Investigation on Preparation and Properties of(Bi_2Te_3)_(0.90)(Sb_2Te_3)_(0.05)(Sb_2Se_3)_(0.05) Melting Cold-pressing Sintering Thermoelectric Materials
在线阅读 下载PDF
导出
摘要 本文采用熔炼冷压烧结法制备了n型赝三元(B i2Te3)0.90(Sb2Te3)0.05(Sb2Se3)0.05熔炼冷压烧结热电材料,分析了材料的微观结构并测试了材料的热电性能。研究表明:烧结有利于提高材料的热电性能;n型赝三元熔炼冷压烧结热电材料的热电性能沿垂直于冷压压力方向存在优化取向。 n-type ( Bi2Te3 )0.90 ( Sb2Te3 )0.05 ( Sb2Se3 )0.05 pseudo-ternary thermoelectric materials were prepared by melting cold-pressing sintering method. The microstructures were analyzed, and the thermoelectric properties were tested. The result shows that the thermoelectric properties are raised through sintering process, which of n-type pseudo-ternary melting cold-pressing sintering thermoelectric materials is preferentially oriented along perpendicular to the pressure direction.
出处 《人工晶体学报》 EI CAS CSCD 北大核心 2006年第3期655-659,共5页 Journal of Synthetic Crystals
基金 教育部科学技术研究重点项目(No.00163) 哈尔滨市重点科技攻关计划项目(No.01112110024)
关键词 (Bi2Te3)0.90(Sb2Te3)0.05(Sb2Se3)0.05 热电材料 冷压烧结 ( Bi2Te3 ) 0.90 ( Sb2Te3 ) 0.05 ( Sb2Se3 ) 0.05 thermoelectric materials cold-pressing sintering
  • 相关文献

参考文献11

  • 1Yim W M,Rosi F D.Compound Telluride and Their Alloys for Peltier Cooling-a Revier[ J].Journal of Solid State Electron,1972,15:1121.
  • 2Row D R.Handdook of Thermoelectrics[ M].CRC Press:Boca Raton,FL,1995:597.
  • 3Wyckoff R W G.Crystal Structure[ M ].Vol.2,Interscience Publishers,New York,1964.
  • 4Row D M.[J].Applied Energy,1986,24:139.
  • 5荣剑英,段福莲,赵洪安,吕长荣,董兴才,李将录,赵秀平.大尺寸P型赝三元温差电取向晶体的研制[J].人工晶体学报,1997,26(3):310-310. 被引量:10
  • 6Hyun D B,Hwang J S,Oh T S,et al.Electrical Properties of the 85% Bi2Te3 -15% Bi2Se3 Thermoelectric Material Doped with SbI3 and CuBr[J].J.Phys.Chem.Solids,1998,59(6):1039-1044.
  • 7Koukharenko E,Frety N,Shepelerich V G,Tedenac J C.Thermoelectric Properties of Bi2Te3 Materials Obtained by the Ultrarapid Quenching Process Route[J].J.Alloys Comp,2000,299(1-2):254.
  • 8吕强,胡建民,信江波,荣剑英.N型赝三元热压热电材料的微观结构和电学性能[J].人工晶体学报,2004,33(5):788-791. 被引量:6
  • 9胡淑红,赵新兵,朱铁军,邬震泰,周邦昌.Bi_2Te_3和Bi_(0.5)Sb_(1.5)Te_3的机械合金化法制备及其热电性能[J].中国有色金属学报,2000,10(S1):73-76. 被引量:7
  • 10SJ2857-88.国家电子工业部标准[S].[S].,..

二级参考文献13

  • 1Wyckoff R W G.Crystal Structure[M]. Vol.2, Interscience Publishers,New York,1964.
  • 2Weise J R , Muller L[J]. J.Phys.Chem.Solids, 1960,15: 13.
  • 3Rowe D M.[J]. Applied Energy. 1986, 24: 139.
  • 4Guff K F, Horst R B, Weaver J L,et al.The Thermoelectric Figure of Merit and Ettingshausen Cooling in Bi-Sb Alloys[J]. Appl. Phys. Lett.,1963,2:145.
  • 5Yanagitani A, Nishikawa S,Tanaka Y, et al.Characteristics of Bi2Te3 Compound Produced by Rapid Solidification [C]. In: K.Matsuura(Ed.) Proceedings of the 12th International Conference on Thermoelectrics,Yokohama:1993:277.
  • 6Hisaakira Imaizumi,Hiroaki Yamaguchi, Hiromasa Kaibe. Thermoelectric Properties of the N-type Bi2(Te,Se)3 by Hot-pressing [C].In:6th International Conference on Thermoelectric Energy Conversion,Texas,USA: March,1986: 141.
  • 7Kim H J, Kim H C, Hyun D B,et al. Thermoelectric Properties of P-type (Bi,Sb)2Te3 Alloys Fabricated by Hot Pressing Method[J]. Metals Mater., 1998, 4: 75.
  • 8Kim H C,Oh T S,Hyun D B. Thermoelectric Properties of the p-type Bi2Te3-Sb2Te3-Sb2Se3 Alloys Fabricated by Mechanical Alloying and Hot Pressing [J]. Journal of Physical and Chemistry of Solids, 2000,61: 743.
  • 9Hiroyuki Kitagawa, Yoshikazu Shinohara, Toshihiro Kitamura, et al. Thermoelectric Properties of Pressure-Current Hot processed Bi2Te3 Related Materials [C]. In : 20th International Conference on Thermoelectrics.Beijing,China: 2001:128.
  • 10Yim W M , Rosi F D. Compound Telluride and Their Alloys for Peltier Cooling-a Review [J]. Journal of Solid State Electron, 1972,15:1121.

共引文献13

同被引文献4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部