摘要
被动调Q晶体C r∶YAG对激光器的性能起着重要的作用。对C r∶YAG被动调Q N d∶YAG激光器进行了实验研究。着重研究了抽运功率、腔长、输出镜透过率以及初始透过率等因素对激光输出脉冲序列的重复率、脉冲宽度以及输出功率的影响。实验结果表明,抽运功率是影响重复率的最大因素,抽运功率的增大可以提高重复率,并减小脉冲宽度;它对腔长的影响效果刚好相反;存在一个可使输出功率最大的最佳输出镜透过率;不同的初始透过率对输出有一定的影响。分析表明被动调Q技术适用于DPL。
The experimental study on Nd ： YAG laser passively Q-switched by Cr ： YAG is carried out. The focus is given to the influence of pumping power, cavity length, the output coupler transmission and initial transmission on the repetition rate, pulse width and output power of laser output. The experiment results were analyzed and discussed. It can be observed from the curve that an increase of pumping power results in an increase of repetition rate and decrease of pulse width, but the impact of cavity length is on the contrary side. There is an optimized output coupler transmission which can maximize the output power. Different initial transmittances have certain effects on the output. The analyses show that the passive Q- switching technology is applicable to DPL.
出处
《应用光学》
CAS
CSCD
2006年第1期46-50,共5页
Journal of Applied Optics
基金
国防重点实验室基金资助(51456050104DZ0101)
关键词
激光技术
被动调Q
重复率
CR:YAG
最佳输出镜透过率
laser technology
passive QLswitching
repetition rate
Cr ： YAG
optimized output coupler transmission
