期刊文献+

Mg-Ce-Zn-Zr合金的显微组织与力学性能 被引量:1

Microstructure and Mechanical Properties of Mg-Ce-Zn-Zr Alloy
在线阅读 下载PDF
导出
摘要 对Mg-Ce-Zn-Zr合金的显微组织进行了观察研究,通过XRD分析、光学显微(OM)分析、扫描电子显微镜(SEM)分析表明:Mg12Ce及Mg17Ce2相铸态时主要存在于晶界,存在于晶界的稀士相Mg12Ce能显著提高合金的再结晶温度,阻碍晶界迁移.因而能提高合金高温机械性能,该合金在热挤压后没有发现明显动态再结晶发生. Microstructure of Mg-2.0Ce-0.7Zn-0.7Zr alloy is studied in this paper.The XRD analysis reveals that the main phase in the alloy is α-Mg,Mg_(12)Ce and Mg_(17)Ce_2 phase.The SEM and OM microstructure of the alloy shows that Mg_(12)Ce and MgZn phase mainly exist in grain boundaries.The fine phase of Mg_(12)Ce can apparently elevate recrystallization temperature by means of preventing the grain boundary migration,and improve the room and elevate temperature properties.No dynamic recrystallization appears after hot-extrusion.
出处 《湖南工程学院学报(自然科学版)》 2005年第1期33-35,84,共4页 Journal of Hunan Institute of Engineering(Natural Science Edition)
关键词 XRD分析 SEM/OM显微组织 晶界迁移 动态再结晶 XRD analysis SEM/OM mincrostructure grain boundary migration dynamic recrystallization
  • 相关文献

参考文献10

二级参考文献11

  • 1民和镁厂(译).国外电解镁生产[M].民和镁厂,1991..
  • 2波尔米尔IJ 陈昌麟 等.轻合金[M].北京:国防工业出版社,1985..
  • 3Nie J F,Scr Mater,1999年,10期,1089页
  • 4Li Y,Mater Sci Technol,1996年,8期,651页
  • 5Wei L Y,Mater Sci Technol,1996年,9期,741页
  • 6Wei L Y,Metal Mater Trans.A,1995年,7期,1705页
  • 7Wei L Y,Metal Mater Trans.A,1995年,8期,1947页
  • 8Luo A,J Mater Sci,1994年,29卷,5259页
  • 9美国金属学会,金属手册,1994年
  • 10陈昌麒,轻合金,1985年

共引文献417

同被引文献17

  • 1夏长清,武文花,吴安如,王银娜.Mg-Nd-Zn-Zr稀土镁合金的热变形行为[J].中国有色金属学报,2004,14(11):1810-1816. 被引量:36
  • 2陈振华,夏伟军,程永奇,傅定发.镁合金织构与各向异性[J].中国有色金属学报,2005,15(1):1-11. 被引量:104
  • 3MATUHAKH.非铁合金的结构与性能[M].丁道云,译.北京:科学出版社,1999.
  • 4MORDIKE B L, EBERT T. Magnesium properties-applications- potential[J]. Materials Science and Engineering A, 2001,302( 1): 37-45.
  • 5PIREZ-PRADO M T, DEL VALLE J A, RUANO O A. Effect of sheet thickness on the microstructure evolution of an Mg alloy during large strain hot rolling[J]. Scripta Materialia, 2004, 50(5): 667-671.
  • 6WANG Y N, HUANG J C. Texture analysis in hexagonal materials[J]. Materials Chemistry and Physics, 2003, 81(1): 11-26.
  • 7BALL E A, PRANGNELL P B. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys[J]. Scripta Metallurgica et Materialia,1994, 31 (2): 111-116.
  • 8JAN B, MARCUS R N, JEREMY W S. The texture and anisotropy of magnesium-zinc-rare earth alloy sheets[J]. Acta Materialia, 2007, 55(6): 2101-2112.
  • 9MISHRA R K, GUPTA A L, RAO P R, SACHDEV A K, KUMAR A M, LUO A A. Influence of cerium on the texture and ductility of magnesium extrusions[J]. Scripta Matialia, 2008, 59(5): 562-565.
  • 10LUO A A, MISHRA R K, SACHDEV A K. Development of high ductility magnesium-zinc-cerium extrusion alloys[C]//AGNEW S R. Washington, USA: The Minerals, Metals & Materials Society, 2010: 313-318.

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部