摘要
通过添加粒径为50～80nm的TiN，改善了Al_2O_3-TiC复合陶瓷的力学性能。以15％(质量分数，下同)的TiN取代15％TiC，制备了纳来TiN改性Al_2O_3-TiC复合陶瓷。结果表明：70％Al_2O_3-15％TiC-15％TiN复合陶瓷的抗弯强度和断裂韧性分别为618 MPa和7.12 MPa·m^(1／2)，比70％Al_2O_3-30％TiC的性能(567 MPa和4.96 MPa·m_(1／2))明显提高，特别是断裂韧性提高了64％。纳米TiN改性Al_2O_3-TiC复合陶瓷韧性的提高主要是由于材料致密度的提高和晶粒的细化所致，它的增韧方式为微裂纹、裂纹桥接和偏转。
By adding nano-TiN with the particle size of 50—80 nm, the mechanical properties of nano-TiN modified Al_2O_3-TiC composite ceramic were improved. The nano-TiN modified Al_2O_3- TiC composite ceramic by substituting 15% (in mass, the same below) TiN for TiC was fabricated. The results show that the bending strength and fracture toughness of 70% Al_2O_3-15%TiC- 15% TiN composite ceramic are 618 MPa and 7.12 MPa · m^(1/2) , which are obviously increased compared to 70% Al_2O_3-30%TiC composite ceramic (567 MPa and 4.96 MPa · m^(1/2). Particularly the fracture toughness is increased by 64%. The main reasons for the increase of the toughness of nano-TiN modified Al_2O_3-TiC composite ceramic are due to the increase of density and fine crystalline particles of the material. Its toughening mode is micro-crack, crack deflection and bridge.
出处
《硅酸盐学报》
EI
CAS
CSCD
北大核心
2004年第12期1542-1545,共4页
Journal of The Chinese Ceramic Society
基金
国家自然科学基金(50072003)安徽省自然科学基金(03044902)
关键词
氧化铝-碳化钛复合陶瓷
纳米氮化钛
改性
微裂纹
alumina-titanium carbide composite ceramic
nano-titanium nitride
modification
microcrack
