FRICTION－WEAR　PROPERTY　OF　HIGH　SILICON　ZA27　ALLOY　PREPARED　BY　SPRAY　DEPOSITION 被引量：2

FRICTION-WEAR PROPERTY OF HIGH SILICON ZA27 ALLOY PREPARED BY SPRAY DEPOSITION

下载PDF

导出

摘要ＦＲＩＣＴＩＯＮ－ＷＥＡＲＰＲＯＰＥＲＴＹＯＦＨＩＧＨＳＩＬＩＣＯＮＺＡ２７ＡＬＬＯＹＰＲＥＰＡＲＥＤＢＹＳＰＲＡＹＤＥＰＯＳＩＴＩＯＮ￥ＹａｎｇＬｉｕｓｈｕａｎ；ＬｉｕＹｏｎｇｃｈａｎｇ；ＹａｎｇＧｅｎｃａｎｇ；ＺｈｏｕＹａｏｈｅ（ＳｔａｔｅＫｅｙ... The friction-wear properties of spray deposited 6% silicon ZA27 alloy have been investigated,and compared with those of conventional casting ZA27 alloys containing silicon or not.The experimental results indicate that wear resistance and antifriction abilities of the material prepared by spray deposition are about 3.4～8.1 times and 1.6～2.4 times higher than those of conventional casting alloys respectively.The reasons for the improvements of friction-wear performance were also investigated from the view of microstructures.

作者 Yang Liushuan Liu Yongchang Yang Gencang Zhou Yaohe (State Key Laboratory of Solidification Processing,Northwestern Polytechnic University,Xi’an 710072)

出处《中国有色金属学会会刊：英文版》 CSCD 1996年第4期105-109,共5页 Transactions of Nonferrous Metals Society of China

关键词 SPRAY DEPOSITION zinc-based ALLOY TRIBOLOGY MICROSTRUCTURES spray deposition zinc-based alloy tribology microstructures

分类号 TG146 [金属学及工艺—金属材料]

引文网络
相关文献

同被引文献6

1Yang Liushuan,Liu Yongchang,Yang Gencang,Zhou Yaohe(State Key Laboratory of Solidification Processing,Northwestern Polytechnic University, Xi’an, 710072).CREEP　CHARACTERISTICS　OF　HIGH　SILICON　ZA27　ALLOY　PREPARED　BY　SPRAY　DEPOSITION[J].中国有色金属学会会刊：英文版,1996,6(2):95-100. 被引量：2
2涂益民,张柯柯,谢敬佩,陈大柔.锌基合金钨极氩弧焊焊接工艺的研究[J].热加工工艺,1994,23(4):25-26. 被引量：11
3廖恒成,孙瑜,孙国雄,汤崇熙.混合稀土对Sr变质近共晶Al-Si合金组织的影响[J].中国有色金属学报,2000,10(5):640-644. 被引量：39
4张柯柯,涂益民,陈跃,张永振,陈大柔,薛锦.ZA12合金氩弧焊HAZ组织模拟及摩擦学性能[J].中国有色金属学报,2000,10(6):868-871. 被引量：2
5Zeng Lingmin,Zhuang Yinghong,Li Junqin,Zhang Liping,Hao Jianmin.X-RAY POWDER DIFFRACTION STUDY FOR RE COMPOUND GdNiSn[J].Transactions of Nonferrous Metals Society of China,1996,6(1):51-53. 被引量：1
6张福全,舒震.高铝锌合金加铈变质的研究[J].特种铸造及有色合金,1992,12(2):1-4. 被引量：14

引证文献2

1谭银元,严汉芳.稀土对ZA27合金组成相的影响[J].中国有色金属学报,2001,11(z1):72-74. 被引量：12
2涂益民,于华,段世新,周艳.锌基合金焊补堆焊层耐磨性及磨损机理研究[J].矿山机械,2005,33(8):94-96.

二级引证文献12

1陈体军,李元东,郝远.Mg和RE对ZA27合金半固态组织的影响[J].铸造技术,2004,25(12):933-936. 被引量：1
2李雪莲,边秀房,张士佼,丁海民,孙保安,王才东.La_(55)Al_(25)Ni_(20)大块非晶合金对ZA27合金凝固组织的影响[J].铸造技术,2007,28(2):234-237.
3于文斌,何洪,黎雪莲,张宝玉,殷和超.Ti和Zr的复合变质与热处理对ZA27合金显微组织的影响[J].金属热处理,2008,33(4):39-44. 被引量：18
4李红英,刘洋,康巍,赵延阔,武岳.均匀化退火对ZA27合金组织与性能的影响[J].材料热处理学报,2010,31(12):107-111. 被引量：11
5王建华,王先德,苏旭平,涂浩.镧对锌铝合金显微组织和力学性能的影响[J].铸造,2011,60(2):171-174. 被引量：8
6杨美荣,程丽丹,李鹏,苗连杰.利用TRMM卫星资料对河南一次强飑线过程的闪电活动分析[J].气象与环境科学,2012,35(1):74-77. 被引量：10
7谭银元.稀土对ZA27合金阻尼性能的影响[J].特种铸造及有色合金,2002,22(2):53-54. 被引量：9
8张亮,司乃潮,吴勇勇.Mn对铸态ZA33合金组织及耐磨性的影响[J].热加工工艺,2015,44(24):60-63. 被引量：1
9朱权利,夏勇,陈家坚,吴资湧.挤压铸造ZA27合金中的夹杂物分析[J].铸造,2016,65(2):158-161. 被引量：4
10刘婷,司乃潮,刘光磊,张瑞,祁昌洋.Effects of Si addition on microstructure, mechanical and thermal fatigue properties of Zn-38Al-2.5Cu alloys[J].Transactions of Nonferrous Metals Society of China,2016,26(7):1775-1782.

1Li Xibin ,Tan Linying,Su Chunming ,Li Meiying(Powder Metallurgy Research Institute, Central South University of Technology, Changsha, 410083, China).FRICTION AND WEAR BEHAVIOUR OF SINTERED BRASS[J].Journal of Central South University,1994,6(1):23-28.
2ZHAO Yun-cai,GE Shi-rong.The influence of MoS_2 on tribology characteristic parameter of Ni60A/MoS_2 composite lubricating coating[J].Journal of Coal Science & Engineering(China),2010,16(1):94-98. 被引量：1
3苏华钦,施忠良,朱鸣芳.WEAR PERFORMANCE AND MECHANISM OF ZINC-ALUMINUM（ZA27）ALLOY[J].Journal of Southeast University(English Edition),1995,11(2):1-8.
4ZHANG Wei ZHANG Shu XU Wei-pu ZU Zi-xin XU Bin-shi.Tribological properties of high velocity arc sprayed Fe-Al based composite coatings at elevated temperature[J].中国有色金属学会会刊：英文版,2004,14(z1):379-382.
5S.Engin,U.Byük,H.Kaya,N.Maraslι.Directional solidification and physical properties measurements of the zinc-aluminum eutectic alloy[J].International Journal of Minerals,Metallurgy and Materials,2011,18(6):659-664. 被引量：3
6K.K. Zhang,D.R. Chen,J. Xue,D. W. Sun and H.C. Li( 1) Department of Materials Engineer, Xi’an Jiaotong University, Xi’an 710049, China 2) Luoyang Institute of Technology, Luoyang 471039, China 3) CITIC Heavy).STUDY OF THE MICROSTRUCTURE SIMULATION AND PERFORMANCE OF FUSION WELDING HAZ OF ZINC-BASED ALLOY[J].Acta Metallurgica Sinica(English Letters),2000,13(1):173-177.
7王璐,王敏,卢凤桂.Dynamic simulation of resistance spot welding of zinc-coated steels[J].China Welding,2006,15(4):39-42. 被引量：2
8Jiang, Jianchun(Department of Mechanical Engineering,Central South University of Technology, Changsha 410083).THE TOLERANCE DESIGN MANUFACTURE AND RELIABILITY[J].中国有色金属学会会刊：英文版,1995,5(2):127-130.
9张洪涛,冯吉才,韩超,刘积厚.The effect of zinc coating during joining aluminium to zinc-coated steel by welding-brazing process[J].China Welding,2012,21(4):55-58.
10Farhad Tohidi Shirehjini,Iman Danaee,Hadi Eskandari,Davood Zarei.Effect of Nano Clay on Corrosion Protection of Zinc-rich Epoxy Coatings on Steel 37[J].Journal of Materials Science & Technology,2016,32(11):1152-1160. 被引量：9

中国有色金属学会会刊：英文版

1996年第4期

浏览历史

内容加载中请稍等...

FRICTION－WEAR　PROPERTY　OF　HIGH　SILICON　ZA27　ALLOY　PREPARED　BY　SPRAY　DEPOSITION 被引量：2

同被引文献6

引证文献2

二级引证文献12

相关作者

相关机构

相关主题

浏览历史

FRICTION－WEAR PROPERTY OF HIGH SILICON ZA27 ALLOY PREPARED BY SPRAY DEPOSITION 被引量：2

同被引文献6

引证文献2

二级引证文献12

相关作者

相关机构

相关主题

浏览历史

FRICTION－WEAR　PROPERTY　OF　HIGH　SILICON　ZA27　ALLOY　PREPARED　BY　SPRAY　DEPOSITION 被引量：2