The relationship between the average penetration velocity,UˉUˉ,and the initial impact velocity, V0V0,in long-rod penetration has been studied recently. Experimental and simulation results all show the linear relatio...The relationship between the average penetration velocity,UˉUˉ,and the initial impact velocity, V0V0,in long-rod penetration has been studied recently. Experimental and simulation results all show the linear relationship between UˉUˉ and V0V0 over a wide range of V0V0 for different combinations of rod and target materials. However, the physical essence has not been fully revealed.In this paper, the Uˉ?V0Uˉ?V0relationship is profoundly analyzed using hydrodynamic model and Alekseevskii-Tate model. Especially, the explicitUˉ?V0Uˉ?V0 relationships are derived fromapproximate solutions of Alekseevskii-Tate model. Besides, the decelerationin long-rod penetration is discussed. The decelerationdegree is quantified by adeceleration index,α=2μˉ/(KΦJp)≈Ypρ?1/2p(ρ?1/2p+ρ?1/2t)V?20α=2μˉ/(KΦJp)≈Ypρp?1/2(ρp?1/2+ρt?1/2)V0?2, which is mostly related to the impact velocity, rod strength and rod/target densities. Thus, the state of penetration process can be identified and designed in experiments.展开更多
We further consider the effect of rod strength by employing the compressible penetration model to study the effect of compressibility on hypervelocity penetration.Meanwhile, we define different instances of penetratio...We further consider the effect of rod strength by employing the compressible penetration model to study the effect of compressibility on hypervelocity penetration.Meanwhile, we define different instances of penetration efficiency in various modified models and compare these penetration efficiencies to identify the effects of different factors in the compressible model. To systematically discuss the effect of compressibility in different metallic rod-target combinations, we construct three cases, i.e., the penetrations by the more compressible rod into the less compressible target, rod into the analogously compressible target, and the less compressible rod into the more compressible target. The effects of volumetric strain, internal energy, and strength on the penetration efficiency are analyzed simultaneously. It indicates that the compressibility of the rod and target increases the pressure at the rod/target interface. The more compressible rod/target has larger volumetric strain and higher internal energy. Both the larger volumetric strain and higher strength enhance the penetration or anti-penetration ability. On the other hand, the higher internal energy weakens the penetration or anti-penetration ability. The two trends conflict, but the volumetric strain dominates in the variation of the penetration efficiency, which would not approach the hydrodynamic limit if the rod and target are not analogously compressible. However, if the compressibility of the rod and target is analogous, it has little effect on the penetration efficiency.展开更多
The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, pe...The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, penetration velocity, rod length, and penetration depth were obtained implicitly as a function of time and solved numerically By employing a linear approximation to the logarithmic relative rod length, we obtain two sets of explicit approximate algebraic solutions based on the implicit theoretica solution deduced from primitive equations. It is very convenient in the theoretical prediction of the Alekseevskii–Tate model to apply these simple algebraic solutions. In particular, approximate solution 1 shows good agreement with the theoretical(exact) solution, and the first-order perturbation solution obtained by Walters et al.(Int. J. Impac Eng. 33:837–846, 2006) can be deemed as a special form of approximate solution 1 in high-speed penetration. Meanwhile, with constant tail velocity and penetration velocity approximate solution 2 has very simple expressions, which is applicable for the qualitative analysis of long-rod penetration. Differences among these two approximate solutions and the theoretical(exact) solution and their respective scopes of application have been discussed, and the inferences with clear physical basis have been drawn. In addition, these two solutions and the first-order perturbation solution are applied to two cases with different initial impact velocity and different penetrator/target combinations to compare with the theoretical(exact) solution. Approximate solution 1 is much closer to the theoretical solution of the Alekseevskii–Tate model than the first-order perturbation solution in both cases, whilst approximate solution 2 brings us a more intuitive understanding of quasi-steady-state penetration.展开更多
Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood microfibril and cell are proposed to analyze orthotro...Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood microfibril and cell are proposed to analyze orthotropic mechanical behavior. Lignin, hemicellulose and crystalline-amorphous cellulose core of spruce are concerned in spruce nanoscale model. The equivalent elastic modulus and yield strength of the microfibril are gained by the RVE simulation. The anisotropism of the crystalline-amorphous cellulose core brings the microfibril buckling deformation during compression loading. The failure mechanism of the cell-wall under axial compression is related to the distribution of amorphous cellulose and crystalline cellulose. According to the spruce cell observation by scanning electron microscope, numerical model of spruce cell is established using simplified circular hole and regular hexagon arrangement respectively. Axial and transverse compression loadings are taken into account in the numerical simulations. It indicates that the compression stress-strain curves of the numerical simulation are consistent with the experimental results. The wood microstructure arrangement has an important effect on the stress plateau during compression process. Cell-wall buckling in axial compression induces the stress value drops rapidly. The wide stress plateau duration means wood is with large energy dissipation under a low stress level. The numerical results show that loading velocity affects greatly wood microstructure failure modes in axial loading. For low velocity axial compression, shear sliding is the main failure mode. For high velocity axial compression, wood occur fold and collapse. In transverse compression, wood deformation is gradual and uniform, which brings stable stress plateau.展开更多
The nose shape effect on long-rod penetration was investigated by establishing numerical 2D models with different original nose shapes.The variations in nose shapes and the mass erosion rate of the rods in the transie...The nose shape effect on long-rod penetration was investigated by establishing numerical 2D models with different original nose shapes.The variations in nose shapes and the mass erosion rate of the rods in the transient phase,primary penetration phase,and secondary penetration phase were adequately analyzed by two dimensionless parameters,i.e.,the nose shape factor N* and the diameter ratio of the rod nose and shank n.In general,N*,η and the mass erosion rate of the rod vary distinctly in different phases,i.e.,unsteady in the initial transient and the secondary penetration phases,and quasi-steady in the primary penetration phase.Furthermore,a relationship between the mass erosion of the rod and the variation in the nose shape was established.A three-phase 2D model of long-rod penetration was further constructed by considering the variations in nose shape.This research may provide a reference to improve the theoretical model of long-rod penetration.展开更多
基金The work was supported by the National Natural Science Foundation of China (Grant 11872118)The authors want to express deep gratitude to the reviewers for their sound comments and helpful suggestions.
文摘The relationship between the average penetration velocity,UˉUˉ,and the initial impact velocity, V0V0,in long-rod penetration has been studied recently. Experimental and simulation results all show the linear relationship between UˉUˉ and V0V0 over a wide range of V0V0 for different combinations of rod and target materials. However, the physical essence has not been fully revealed.In this paper, the Uˉ?V0Uˉ?V0relationship is profoundly analyzed using hydrodynamic model and Alekseevskii-Tate model. Especially, the explicitUˉ?V0Uˉ?V0 relationships are derived fromapproximate solutions of Alekseevskii-Tate model. Besides, the decelerationin long-rod penetration is discussed. The decelerationdegree is quantified by adeceleration index,α=2μˉ/(KΦJp)≈Ypρ?1/2p(ρ?1/2p+ρ?1/2t)V?20α=2μˉ/(KΦJp)≈Ypρp?1/2(ρp?1/2+ρt?1/2)V0?2, which is mostly related to the impact velocity, rod strength and rod/target densities. Thus, the state of penetration process can be identified and designed in experiments.
文摘We further consider the effect of rod strength by employing the compressible penetration model to study the effect of compressibility on hypervelocity penetration.Meanwhile, we define different instances of penetration efficiency in various modified models and compare these penetration efficiencies to identify the effects of different factors in the compressible model. To systematically discuss the effect of compressibility in different metallic rod-target combinations, we construct three cases, i.e., the penetrations by the more compressible rod into the less compressible target, rod into the analogously compressible target, and the less compressible rod into the more compressible target. The effects of volumetric strain, internal energy, and strength on the penetration efficiency are analyzed simultaneously. It indicates that the compressibility of the rod and target increases the pressure at the rod/target interface. The more compressible rod/target has larger volumetric strain and higher internal energy. Both the larger volumetric strain and higher strength enhance the penetration or anti-penetration ability. On the other hand, the higher internal energy weakens the penetration or anti-penetration ability. The two trends conflict, but the volumetric strain dominates in the variation of the penetration efficiency, which would not approach the hydrodynamic limit if the rod and target are not analogously compressible. However, if the compressibility of the rod and target is analogous, it has little effect on the penetration efficiency.
基金supported by the National Outstanding Young Scientist Foundation of China (Grant 11225213)the Key Subject "Computational Solid Mechanics" of China Academy of Engineering Physics
文摘The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, penetration velocity, rod length, and penetration depth were obtained implicitly as a function of time and solved numerically By employing a linear approximation to the logarithmic relative rod length, we obtain two sets of explicit approximate algebraic solutions based on the implicit theoretica solution deduced from primitive equations. It is very convenient in the theoretical prediction of the Alekseevskii–Tate model to apply these simple algebraic solutions. In particular, approximate solution 1 shows good agreement with the theoretical(exact) solution, and the first-order perturbation solution obtained by Walters et al.(Int. J. Impac Eng. 33:837–846, 2006) can be deemed as a special form of approximate solution 1 in high-speed penetration. Meanwhile, with constant tail velocity and penetration velocity approximate solution 2 has very simple expressions, which is applicable for the qualitative analysis of long-rod penetration. Differences among these two approximate solutions and the theoretical(exact) solution and their respective scopes of application have been discussed, and the inferences with clear physical basis have been drawn. In addition, these two solutions and the first-order perturbation solution are applied to two cases with different initial impact velocity and different penetrator/target combinations to compare with the theoretical(exact) solution. Approximate solution 1 is much closer to the theoretical solution of the Alekseevskii–Tate model than the first-order perturbation solution in both cases, whilst approximate solution 2 brings us a more intuitive understanding of quasi-steady-state penetration.
基金supported by the National Natural Science Foundation of China(Grants Nos 11302211,11390361,and 11572299).
文摘Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood microfibril and cell are proposed to analyze orthotropic mechanical behavior. Lignin, hemicellulose and crystalline-amorphous cellulose core of spruce are concerned in spruce nanoscale model. The equivalent elastic modulus and yield strength of the microfibril are gained by the RVE simulation. The anisotropism of the crystalline-amorphous cellulose core brings the microfibril buckling deformation during compression loading. The failure mechanism of the cell-wall under axial compression is related to the distribution of amorphous cellulose and crystalline cellulose. According to the spruce cell observation by scanning electron microscope, numerical model of spruce cell is established using simplified circular hole and regular hexagon arrangement respectively. Axial and transverse compression loadings are taken into account in the numerical simulations. It indicates that the compression stress-strain curves of the numerical simulation are consistent with the experimental results. The wood microstructure arrangement has an important effect on the stress plateau during compression process. Cell-wall buckling in axial compression induces the stress value drops rapidly. The wide stress plateau duration means wood is with large energy dissipation under a low stress level. The numerical results show that loading velocity affects greatly wood microstructure failure modes in axial loading. For low velocity axial compression, shear sliding is the main failure mode. For high velocity axial compression, wood occur fold and collapse. In transverse compression, wood deformation is gradual and uniform, which brings stable stress plateau.
基金supported by the National Natural Science Foundation of China(Grant Nos.11872118 and 12002293).
文摘The nose shape effect on long-rod penetration was investigated by establishing numerical 2D models with different original nose shapes.The variations in nose shapes and the mass erosion rate of the rods in the transient phase,primary penetration phase,and secondary penetration phase were adequately analyzed by two dimensionless parameters,i.e.,the nose shape factor N* and the diameter ratio of the rod nose and shank n.In general,N*,η and the mass erosion rate of the rod vary distinctly in different phases,i.e.,unsteady in the initial transient and the secondary penetration phases,and quasi-steady in the primary penetration phase.Furthermore,a relationship between the mass erosion of the rod and the variation in the nose shape was established.A three-phase 2D model of long-rod penetration was further constructed by considering the variations in nose shape.This research may provide a reference to improve the theoretical model of long-rod penetration.
