1. Introduction The discovery of possible high T;super-conductivity at 35K in La-Ba-Cu-O systemsparked an intense study on the new classof cupric oxides by a few laboratoriesincluding the joint research group of highT...1. Introduction The discovery of possible high T;super-conductivity at 35K in La-Ba-Cu-O systemsparked an intense study on the new classof cupric oxides by a few laboratoriesincluding the joint research group of highT;superconductivity in the Institute ofPhysics, Academia Sinica. A few monthslater we not only confirmed the展开更多
ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperat...ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperature,and provide a design basis for subsequent experiments to test and realize the p-^(11)B fusion burning plasma.Based on 0-dimensional(0-D)system design and 1.5-dimensional transport modelling analyses,the main target parameters of EHL-2 have been basically determined,including the plasma major radius,R0,of 1.05 m,the aspect ratio,A,of 1.85,the maximum central toroidal magnetic field strength,B0,of 3 T,and the plasma toroidal current,Ip,of 3 MA.The main heating system will be the neutral beam injection at a total power of 17 MW.In addition,6 MW of electron cyclotron resonance heating will serve as the main means of local current drive and MHD instabilities control.The physics design of EHL-2 is focused on addressing three main operating scenarios,i.e.,(1)high ion temperature scenario,(2)high-performance steady-state scenario and(3)high triple product scenario.Each scenario will integrate solutions to different important issues,including equilibrium configuration,heating and current drive,confinement and transport,MHD instability,p-^(11)B fusion reaction,plasma-wall interactions,etc.Beyond that,there are several unique and significant challenges to address,including●establish a plasma with extremely high core ion temperature(T_(i,0)>30 keV),and ensure a large ion-to-electron tempera-ture ratio(T_(i,0)/Te,0>2),and a boron concentration of 10%‒15%at the plasma core;●realize the start-up by non-inductive current drive and the rise of MA-level plasma toroidal current.This is because the volt-seconds that the central solenoid of the ST can provide are very limited;●achieve divertor heat and particle fluxes control including complete detachment under high P/R(>20 MW/m)at rela-tively low electron densities.This overview will introduce the advanced progress in the physics design of EHL-2.展开更多
ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the b...ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the biggest challenges of EHL-2 is how to achieve several MA current flat-tops with limited voltage-seconds(Vs)of the center solenoid(CS)coils.In order to minimize the consumption of Vs,a fully non-inductive start-up by electron cyclotron resonance heating(ECRH)will be applied in EHL-2.The ramp-up phase will be accomplished with the synergetic mode between the CS and non-inductive methods.The strategy of non-inductive start-up and ramp-up with synergetic mode has been verified on EXL-50U’s experiments.Based on this strategy,numerical simulations indicate the feasibility of EHL-2 achieving 3 MA plasma current.A high-performance steady-state scenario with Ip~1.5 MA is also designed.In this scenario,the bootstrap current fraction fBS>70%,the safety factor q at the magnetic axis q0>2,the minimum safety factor qmin>1,the poloidal betaβp>3 and normalized betaβN>2.3.Each design iteration integrates the validation of physical models with the constraints of engineering implementation,gradually optimizing the performance of the heating and current drive(H&CD)systems.Numerical simulation results for general auxiliary H&CD systems such as neutral beam injection(NBI),electron cyclotron(EC)wave,ion cyclotron wave(ICW),and lower hybrid wave(LHW)are presented.These simulation results ensure that the 31 MW H&CD systems comprehensively cover all scenarios while maintaining engineering feasibility.展开更多
In engineering practice,it is often necessary to determine functional relationships between dependent and independent variables.These relationships can be highly nonlinear,and classical regression approaches cannot al...In engineering practice,it is often necessary to determine functional relationships between dependent and independent variables.These relationships can be highly nonlinear,and classical regression approaches cannot always provide sufficiently reliable solutions.Nevertheless,Machine Learning(ML)techniques,which offer advanced regression tools to address complicated engineering issues,have been developed and widely explored.This study investigates the selected ML techniques to evaluate their suitability for application in the hot deformation behavior of metallic materials.The ML-based regression methods of Artificial Neural Networks(ANNs),Support Vector Machine(SVM),Decision Tree Regression(DTR),and Gaussian Process Regression(GPR)are applied to mathematically describe hot flow stress curve datasets acquired experimentally for a medium-carbon steel.Although the GPR method has not been used for such a regression task before,the results showed that its performance is the most favorable and practically unrivaled;neither the ANN method nor the other studied ML techniques provide such precise results of the solved regression analysis.展开更多
Flexible wearable optoelectronic devices fabricated fromorganic–inorganic hybrid perovskites significantly accelerate the developmentof portable energy,biomedicine,and sensing fields,but their poor thermal stabilityh...Flexible wearable optoelectronic devices fabricated fromorganic–inorganic hybrid perovskites significantly accelerate the developmentof portable energy,biomedicine,and sensing fields,but their poor thermal stabilityhinders further applications.Conversely,all-inorganic perovskites possessexcellent thermal stability,but black-phase all-inorganic perovskite filmusually requires high-temperature annealing steps,which increases energy consumptionand is not conducive to the fabrication of flexible wearable devices.In this work,an unprecedented low-temperature fabrication of stable blackphaseCsPbI3perovskite films is demonstrated by the in situ hydrolysis reactionof diphenylphosphinic chloride additive.The released diphenyl phosphateand chloride ions during the hydrolysis reaction significantly lower the phasetransition temperature and effectively passivate the defects in the perovskitefilms,yielding high-performance photodetectors with a responsivity of 42.1 AW−1 and a detectivity of 1.3×10^(14)Jones.Furthermore,high-fidelity imageand photoplethysmography sensors are demonstrated based on the fabricated flexible wearable photodetectors.This work provides a newperspective for the low-temperature fabrication of large-area all-inorganic perovskite flexible optoelectronic devices.展开更多
EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which i...EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which ideally can be converted to electricity with high efficiency(>80%).However,there exist serious difficulties to realize such conversion in a fusion device,due to the high energy density and high voltage required.To comprehensively describe the progress of the EHL-2 physics design,this work presents preliminary considerations of approaches for achieving energy conversion,highlighting critical issues for further investigation.Specifically,we provide an initial simulation of alpha particle extraction in the EHL-2 ST configuration as a starting point for p-^(11)B fusion energy conversion.展开更多
This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks ...This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks and analyzed the two main fusion channels:thermal and beam-thermal.Using EHL-2 design parameters with n_(boron)=007n_(ion)and a hydrogen beam at 200 keV and 1 MW,our simulation indicates that p-11B reactions produce approximately 1.5×10^(15)αparticles per second(~0.7 kW)from the thermal channel,and5.3×10^(14)(~0.25 kW)from the beam-thermal channel.We conducted parameter scans to establish a solid physics foundation for the high ion temperature conditions(T_(i)>26ke V)designed for EHL-2.This work also laid the groundwork for studying various operation modes to explore different reaction channels.The simulation results suggest that the conditions in EHL-2 could be sufficient for investigating p-11B thermonuclear reactions.In addition,we found that EHL-2 offered good confinement for energetic particles,allowing us to research the interactions between these ions and plasmas.This research enhances our understanding of burning plasma physics.展开更多
The EHL-2(ENN He-Long 2)spherical torus(ST)project focuses on advancing spherical torus technology to address the unique challenges of p-^(11)B fusion,which demands significantly higher ion temperature and heat flux t...The EHL-2(ENN He-Long 2)spherical torus(ST)project focuses on advancing spherical torus technology to address the unique challenges of p-^(11)B fusion,which demands significantly higher ion temperature and heat flux to the divertor plate compared to traditional deuterium-tritium fusion.With a major radius of 1.05 m and a plasma current of 3 MA,the project aims to evaluate and optimize advanced divertor configurations,specifically the Super-X and X-point target(XPT)divertors.The design incorporates an up-down double-null configuration featuring a conventional inner divertor and an XPT outer divertor to effectively reduce the heat flux.The poloidal field(PF)coil system is meticulously optimized to balance engineering constraints with the flexibility in equilibrium configurations.This design is expected to provide a reference equilibrium configuration for other physics design issues and offer critical insight into heat load management.展开更多
The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in th...The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in the first experimental phase is 500 kA,and in the future second phase,the goal of plasma current is 1 MA.On the EXL-50U project,the ENN fusion team expeditiously accomplished a series of comprehensive tasks including physical and engineering design,main component construction installation,and system commissioning,all within a mere eighteen-month timeframe.In the experiments of 2024,the EXL-50U achieved a 500 kA limiter configuration discharge using ECRH(Electron Cyclotron Resonance Heating)for non-inductive current start-up and a current ramp-up with the synergetic effect of ECRH and central solenoid(CS).Preliminary divertor configuration plasmas were also obtained under 200 kA plasma current.The core ion temperature of 1 keV was achieved with low-power NBI heating,and the energy confinement time of 30 ms was reached with Ohmic heating in the flat-top phase.The current and future experiments of EXL-50U will strongly support the physical design and operational scenarios of EHL-2 in the areas of current drive,high ion temperature exploration,energy transport and confinement,and hydrogen-boron physical characteristics.At the same time,the experience in the design,construction,and commissioning of the engineering,heating,and diagnostics systems on EXL-50U is also very beneficial for enhancing the feasibility of the engineering design for EHL-2.展开更多
EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,and...EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,andτ_(E)~0.5 s.High ion temperature is one of the standard operation scenarios of EHL-2,aiming to reduce bremsstrahlung radiation while enhancing plasma parameters by elevating the ion to electron temperature ratio.In order to achieve high ion temperature,neutral beam injection is considered the primary heating method during the flat-top phase.The neutral beam system for EHL-2 comprises 3-5 beams with energy/power ranging from 60 keV/4 MW,80-100 keV/10 MW,to 200 keV/3 MW.This work conducts predictive analysis on core transport during the flat-top phase of EHL-2’s high-ion-temperature scenario utilizing ASTRA.The study delineates the potential operating range of core temperature and other parameters given the designed heating capacity.Specifically,the study presents predictive simulations based on CDBM,GLF23,Bohm-gyro-Bohm,and IFSPPPL transport models,evaluating the steady-state power balance,energy confinement time,and impact of various parameters such as plasma density and NBI power on core ion temperature.The simulations demonstrate that the design parameters of the EHL-2 high-Ti scenario,although sensitive to varying transport models,are hopefully attainable as long as adequate ion heating and controlled ion transport levels are ensured.展开更多
The EHL-2 spherical torus at ENN is the next-generation experimental platform under conceptual design,aiming at realizing proton-boron(p-^(11)B)thermonuclear fusion,which is an attractive pathway towards neutron-free ...The EHL-2 spherical torus at ENN is the next-generation experimental platform under conceptual design,aiming at realizing proton-boron(p-^(11)B)thermonuclear fusion,which is an attractive pathway towards neutron-free fusion.To achieve high-performance steady-state plasma,it is extremely necessary to study the turbulence transport characteristics with high boron content in the plasma core.This study investigates the transport properties in the core internal transport barrier(ITB)region of p-^(11)B plasma utilizing the gyrokinetic code GENE in view of the high ion temperature scenario of EHL-2,specifically focusing on the impact of boron fractions and plasmaβon the microinstabilities and corresponding transport features.Numerical findings indicate that the inclusion of boron species effectively suppresses the trapped electron modes(TEMs)as well as promoting a transition from electromagnetic to electrostatic turbulence with increased boron fraction,which is a result of the suppression of microinstabilities by effective charge and mass.Moreover,it has been identified that the external E×B rotational shear has a notable inhibitory influence on transport,which can reduce the transport level by two to three orders of magnitude,especially at medium boron content.The suppressive effect of E×B on turbulence is weakened once the kinetic ballooning mode(KBM)is excited and the transport shows a rapid increase withβtogether with a reduction in zonal flow amplitude,which is consistent with previous findings.Therefore,it is strongly suggested that exploring advanced strategies for mitigating turbulent transport at highβregimes is necessary for the active control of plasma behavior regarding p-^(11)B plasma-based fusion devices such as EHL-2.展开更多
The next generation fusion device listed on ENN’s fusion roadmap,named as(ENN He-Long)EHL-2,is under both physics and engineering designs.The instabilities of ideal magnetohydrodynamics(MHD)mode and neoclassical tear...The next generation fusion device listed on ENN’s fusion roadmap,named as(ENN He-Long)EHL-2,is under both physics and engineering designs.The instabilities of ideal magnetohydrodynamics(MHD)mode and neoclassical tearing mode(NTM)stabilized by electron cyclotron current drive(ECCD)for EHL-2’s two typical operation scenarios are analyzed.For high-ion-temperature operating(HITO)scenario,the vertical displacement event(VDE)could be a big challenge to the device safety.For the steady-state operating(SSO)scenario,the limitation may rise from the ideal MHD mode,NTM,etc.This suggests that the MHD analysis of both operation scenarios should be done with different focusing.Preliminary analysis based on the current physics and engineering design of both two scenarios is given in this paper.Based on the analysis result of above,the future assessments might target at active control method and the effect of boron on MHD activities.展开更多
This paper reviews the energetic particle（EP） experiments during electron cyclotron resonance heating（ECRH） and neutral beam injection in the HL-2 A tokamak.A number of important results are summarized,which relat...This paper reviews the energetic particle（EP） experiments during electron cyclotron resonance heating（ECRH） and neutral beam injection in the HL-2 A tokamak.A number of important results are summarized,which relate to ITER physics,including the behavior of the multi-mode instability,the nonlinear interaction between wave-wave and wave-particles,the losses of EP induced by the instabilities,the effect of the EP instabilities on the thermal plasma confinement and the control of the EP instabilities by means of ECRH.Systematic experiments indicate that when the drive is great enough,the nonlinear effects and the multi-mode coexistence may play an important role,which affect the transport both of the EPs and the background plasma confinement,and these instabilities could be controlled.Some new phenomena about the EP induced instabilities discovered recently on the device,such as high frequency reversed shear Alfvén eigenmodes,Alfvénic ion temperature gradient modes,the geodesic acoustic mode induced by energetic electrons excited by interaction between tearing mode and beta induced Alfvén eigenmode and double e-fishbone in negative magnetic shear discharges etc,have also been presented in the paper.展开更多
Comprehensive understanding and possible control of parametric instabilities in the context of inertial confinement fusion (ICF) remains achallenging task. The details of the absorption processes and the detrimental e...Comprehensive understanding and possible control of parametric instabilities in the context of inertial confinement fusion (ICF) remains achallenging task. The details of the absorption processes and the detrimental effects of hot electrons on the implosion process require as mucheffort on the experimental side as on the theoretical and simulation side. This paper describes a proposal for experimental studies on nonlinearinteraction of intense laser pulses with a high-temperature plasma under conditions corresponding to direct-drive ICF schemes. We propose todevelop a platform for laser-plasma interaction studies based on foam targets. Parametric instabilities are sensitive to the bulk plasma temperatureand the density scale length. Foam targets are sufficiently flexible to allow control of these parameters. However, investigationsconducted on small laser facilities cannot be extrapolated in a reliable way to real fusion conditions. It is therefore necessary to performexperiments at a multi-kilojoule energy level on medium-scale facilities such asOMEGAor SG-III. An example of two-plasmon decay instabilityexcited in the interaction of two laser beams is considered.展开更多
The P3 installation of ELI-Beamlines is conceived as an experimental platform for multiple high-repetition-rate laser beams spanning time scales from femtosecond via picosecond to nanosecond.The upcoming L4n laser bea...The P3 installation of ELI-Beamlines is conceived as an experimental platform for multiple high-repetition-rate laser beams spanning time scales from femtosecond via picosecond to nanosecond.The upcoming L4n laser beamline will provide shaped nanosecond pulses of up to 1.9 kJ at a maximum repetition rate of 1 shot/min.This beamline will provide unique possibilities for high-pressure,high-energy-density physics,warm dense matter,and laser–plasma interaction experiments.Owing to the high repetition rate,it will become possible to obtain considerable improvements in data statistics,in particular,for equation-of-state data sets.The nanosecond beam will be coupled with short sub-picosecond pulses,providing high-resolution diagnostic tools by either irradiating a backlighter target or driving a betatron setup to generate energetic electrons and hard X-rays.展开更多
The physics of laser-plasma interaction is studied on the Shenguang III prototype laser facility under conditions relevant to inertial confinement fusion designs.A sub-millimeter-size underdense hot plasma is created ...The physics of laser-plasma interaction is studied on the Shenguang III prototype laser facility under conditions relevant to inertial confinement fusion designs.A sub-millimeter-size underdense hot plasma is created by ionization of a low-density plastic foam by four high-energy(3.2 kJ)laser beams.An interaction beam is fired with a delay permitting evaluation of the excitation of parametric instabilities at different stages of plasma evolution.Multiple diagnostics are used for plasma characterization,scattered radiation,and accelerated electrons.The experimental results are analyzed with radiation hydrodynamic simulations that take account of foam ionization and homogenization.The measured level of stimulated Raman scattering is almost one order of magnitude larger than that measured in experiments with gasbags and hohlraums on the same installation,possibly because of a greater plasma density.Notable amplification is achieved in high-intensity speckles,indicating the importance of implementing laser temporal smoothing techniques with a large bandwidth for controlling laser propagation and absorption.展开更多
An E//B neutral particle analyzer(NPA)has been designed and is under development at Sichuan University and Southwestern Institute of Physics.The main purpose of the E//B NPA is to measure the distribution function of ...An E//B neutral particle analyzer(NPA)has been designed and is under development at Sichuan University and Southwestern Institute of Physics.The main purpose of the E//B NPA is to measure the distribution function of fast ions in the HL-2A/3 tokamak.The E//B NPA contains three main units,i.e.the stripping unit,the analyzing unit and the detection unit.A gas stripping chamber was adopted as the stripping unit.The results of the simulations and beam tests for the stripping chamber are presented.Parallel electric and magnetic fields provided by a NdFeB permanent magnet and two parallel electric plates were designed and constructed for the analyzing unit.The calibration of the magnetic and electric fields was performed using a 50 kV electron cyclotron resonance ion source(ECRIS)platform.The detection unit consists of 32lutetium-yttrium oxyorthosilicate(LYSO)detector modules arranged in two rows.The response functions ofα,hydrogen ions(H^(+),H_(2)^(+)and H_(3)^(+))andγfor a detector module were measured with^(241)Am,^(137)Cs and^(152)Eu sources together with the 50 kV ECRIS platform.The overall results indicate that the designed E//B NPA device is capable of measuring the intensity of neutral hydrogen and deuteron atoms with energy higher than 20 keV.展开更多
The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the cr...The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.展开更多
Surface metallization of glass fiber(GF)/polyetheretherketone(PEEK)[GF/PEEK] is conducted by coating copper using electroplating and magnetron sputtering and the properties are determined by X-ray diffraction(XRD), sc...Surface metallization of glass fiber(GF)/polyetheretherketone(PEEK)[GF/PEEK] is conducted by coating copper using electroplating and magnetron sputtering and the properties are determined by X-ray diffraction(XRD), scanning electron microscopy(SEM), and electron backscatter diffraction(EBSD).The coating bonding strength is assessed by pull-out tests and scribing in accordance with GB/T 9286-1998.The results show that the Cu coating with a thickness of 30 μm deposited on GF/PEEK by magnetron sputtering has lower roughness, finer grain size, higher crystallinity, as well as better macroscopic compressive stress,bonding strength, and electrical conductivity than the Cu coating deposited by electroplating.展开更多
Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than t...Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.展开更多
文摘1. Introduction The discovery of possible high T;super-conductivity at 35K in La-Ba-Cu-O systemsparked an intense study on the new classof cupric oxides by a few laboratoriesincluding the joint research group of highT;superconductivity in the Institute ofPhysics, Academia Sinica. A few monthslater we not only confirmed the
文摘ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperature,and provide a design basis for subsequent experiments to test and realize the p-^(11)B fusion burning plasma.Based on 0-dimensional(0-D)system design and 1.5-dimensional transport modelling analyses,the main target parameters of EHL-2 have been basically determined,including the plasma major radius,R0,of 1.05 m,the aspect ratio,A,of 1.85,the maximum central toroidal magnetic field strength,B0,of 3 T,and the plasma toroidal current,Ip,of 3 MA.The main heating system will be the neutral beam injection at a total power of 17 MW.In addition,6 MW of electron cyclotron resonance heating will serve as the main means of local current drive and MHD instabilities control.The physics design of EHL-2 is focused on addressing three main operating scenarios,i.e.,(1)high ion temperature scenario,(2)high-performance steady-state scenario and(3)high triple product scenario.Each scenario will integrate solutions to different important issues,including equilibrium configuration,heating and current drive,confinement and transport,MHD instability,p-^(11)B fusion reaction,plasma-wall interactions,etc.Beyond that,there are several unique and significant challenges to address,including●establish a plasma with extremely high core ion temperature(T_(i,0)>30 keV),and ensure a large ion-to-electron tempera-ture ratio(T_(i,0)/Te,0>2),and a boron concentration of 10%‒15%at the plasma core;●realize the start-up by non-inductive current drive and the rise of MA-level plasma toroidal current.This is because the volt-seconds that the central solenoid of the ST can provide are very limited;●achieve divertor heat and particle fluxes control including complete detachment under high P/R(>20 MW/m)at rela-tively low electron densities.This overview will introduce the advanced progress in the physics design of EHL-2.
基金supported by ENN Group and ENN Energy Research Institute.The authors would like to express their gratitude for the contributions of the ENN fusion team and collaborators,such as Tiantian Sun,Haojie Ma,and Yong Guo,in supporting these endeavours.The authors also acknowledge the support of the National SuperComputer Center in Tianjin and Beijing PARATERA Tech Corp.,Ltd.,for providing HPC resources that have contributed to the research results reported in this paper.This work was partly supported by National Natural Science Fundation of China(Nos.12375215 and 12475210).
文摘ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the biggest challenges of EHL-2 is how to achieve several MA current flat-tops with limited voltage-seconds(Vs)of the center solenoid(CS)coils.In order to minimize the consumption of Vs,a fully non-inductive start-up by electron cyclotron resonance heating(ECRH)will be applied in EHL-2.The ramp-up phase will be accomplished with the synergetic mode between the CS and non-inductive methods.The strategy of non-inductive start-up and ramp-up with synergetic mode has been verified on EXL-50U’s experiments.Based on this strategy,numerical simulations indicate the feasibility of EHL-2 achieving 3 MA plasma current.A high-performance steady-state scenario with Ip~1.5 MA is also designed.In this scenario,the bootstrap current fraction fBS>70%,the safety factor q at the magnetic axis q0>2,the minimum safety factor qmin>1,the poloidal betaβp>3 and normalized betaβN>2.3.Each design iteration integrates the validation of physical models with the constraints of engineering implementation,gradually optimizing the performance of the heating and current drive(H&CD)systems.Numerical simulation results for general auxiliary H&CD systems such as neutral beam injection(NBI),electron cyclotron(EC)wave,ion cyclotron wave(ICW),and lower hybrid wave(LHW)are presented.These simulation results ensure that the 31 MW H&CD systems comprehensively cover all scenarios while maintaining engineering feasibility.
基金supported by the SP2024/089 Project by the Faculty of Materials Science and Technology,VˇSB-Technical University of Ostrava.
文摘In engineering practice,it is often necessary to determine functional relationships between dependent and independent variables.These relationships can be highly nonlinear,and classical regression approaches cannot always provide sufficiently reliable solutions.Nevertheless,Machine Learning(ML)techniques,which offer advanced regression tools to address complicated engineering issues,have been developed and widely explored.This study investigates the selected ML techniques to evaluate their suitability for application in the hot deformation behavior of metallic materials.The ML-based regression methods of Artificial Neural Networks(ANNs),Support Vector Machine(SVM),Decision Tree Regression(DTR),and Gaussian Process Regression(GPR)are applied to mathematically describe hot flow stress curve datasets acquired experimentally for a medium-carbon steel.Although the GPR method has not been used for such a regression task before,the results showed that its performance is the most favorable and practically unrivaled;neither the ANN method nor the other studied ML techniques provide such precise results of the solved regression analysis.
基金supported by the National Natural Science Foundation of China(52303257,52321006,T2394480,and T2394484)the National Key R&D Program of China(Grant No.2023YFE0111500)+3 种基金Key Research&Development and Promotion of Special Project(Scientific Problem Tackling)of Henan Province(242102211090)the China Postdoctoral Science Foundation(2023TQ0300,and 2023M743171)the Postdoctoral Fellowship Program(Grade B)of China Postdoctoral Science Foundation(GZB20230666)College Student Innovation and Entrepreneurship Training Program of Zhengzhou University(202410459200)。
文摘Flexible wearable optoelectronic devices fabricated fromorganic–inorganic hybrid perovskites significantly accelerate the developmentof portable energy,biomedicine,and sensing fields,but their poor thermal stabilityhinders further applications.Conversely,all-inorganic perovskites possessexcellent thermal stability,but black-phase all-inorganic perovskite filmusually requires high-temperature annealing steps,which increases energy consumptionand is not conducive to the fabrication of flexible wearable devices.In this work,an unprecedented low-temperature fabrication of stable blackphaseCsPbI3perovskite films is demonstrated by the in situ hydrolysis reactionof diphenylphosphinic chloride additive.The released diphenyl phosphateand chloride ions during the hydrolysis reaction significantly lower the phasetransition temperature and effectively passivate the defects in the perovskitefilms,yielding high-performance photodetectors with a responsivity of 42.1 AW−1 and a detectivity of 1.3×10^(14)Jones.Furthermore,high-fidelity imageand photoplethysmography sensors are demonstrated based on the fabricated flexible wearable photodetectors.This work provides a newperspective for the low-temperature fabrication of large-area all-inorganic perovskite flexible optoelectronic devices.
文摘EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which ideally can be converted to electricity with high efficiency(>80%).However,there exist serious difficulties to realize such conversion in a fusion device,due to the high energy density and high voltage required.To comprehensively describe the progress of the EHL-2 physics design,this work presents preliminary considerations of approaches for achieving energy conversion,highlighting critical issues for further investigation.Specifically,we provide an initial simulation of alpha particle extraction in the EHL-2 ST configuration as a starting point for p-^(11)B fusion energy conversion.
基金supported by ENN Group and ENN Energy Research Institute.
文摘This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks and analyzed the two main fusion channels:thermal and beam-thermal.Using EHL-2 design parameters with n_(boron)=007n_(ion)and a hydrogen beam at 200 keV and 1 MW,our simulation indicates that p-11B reactions produce approximately 1.5×10^(15)αparticles per second(~0.7 kW)from the thermal channel,and5.3×10^(14)(~0.25 kW)from the beam-thermal channel.We conducted parameter scans to establish a solid physics foundation for the high ion temperature conditions(T_(i)>26ke V)designed for EHL-2.This work also laid the groundwork for studying various operation modes to explore different reaction channels.The simulation results suggest that the conditions in EHL-2 could be sufficient for investigating p-11B thermonuclear reactions.In addition,we found that EHL-2 offered good confinement for energetic particles,allowing us to research the interactions between these ions and plasmas.This research enhances our understanding of burning plasma physics.
基金supported by the ENN Group and the ENN Energy Research Institute.
文摘The EHL-2(ENN He-Long 2)spherical torus(ST)project focuses on advancing spherical torus technology to address the unique challenges of p-^(11)B fusion,which demands significantly higher ion temperature and heat flux to the divertor plate compared to traditional deuterium-tritium fusion.With a major radius of 1.05 m and a plasma current of 3 MA,the project aims to evaluate and optimize advanced divertor configurations,specifically the Super-X and X-point target(XPT)divertors.The design incorporates an up-down double-null configuration featuring a conventional inner divertor and an XPT outer divertor to effectively reduce the heat flux.The poloidal field(PF)coil system is meticulously optimized to balance engineering constraints with the flexibility in equilibrium configurations.This design is expected to provide a reference equilibrium configuration for other physics design issues and offer critical insight into heat load management.
基金supported by ENN Group and ENN Energy Research Institute.
文摘The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in the first experimental phase is 500 kA,and in the future second phase,the goal of plasma current is 1 MA.On the EXL-50U project,the ENN fusion team expeditiously accomplished a series of comprehensive tasks including physical and engineering design,main component construction installation,and system commissioning,all within a mere eighteen-month timeframe.In the experiments of 2024,the EXL-50U achieved a 500 kA limiter configuration discharge using ECRH(Electron Cyclotron Resonance Heating)for non-inductive current start-up and a current ramp-up with the synergetic effect of ECRH and central solenoid(CS).Preliminary divertor configuration plasmas were also obtained under 200 kA plasma current.The core ion temperature of 1 keV was achieved with low-power NBI heating,and the energy confinement time of 30 ms was reached with Ohmic heating in the flat-top phase.The current and future experiments of EXL-50U will strongly support the physical design and operational scenarios of EHL-2 in the areas of current drive,high ion temperature exploration,energy transport and confinement,and hydrogen-boron physical characteristics.At the same time,the experience in the design,construction,and commissioning of the engineering,heating,and diagnostics systems on EXL-50U is also very beneficial for enhancing the feasibility of the engineering design for EHL-2.
基金supported by the ENN Group and ENN Energy Research Institutesupported by National Natural Science Foundation of China(No.12475210).
文摘EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,andτ_(E)~0.5 s.High ion temperature is one of the standard operation scenarios of EHL-2,aiming to reduce bremsstrahlung radiation while enhancing plasma parameters by elevating the ion to electron temperature ratio.In order to achieve high ion temperature,neutral beam injection is considered the primary heating method during the flat-top phase.The neutral beam system for EHL-2 comprises 3-5 beams with energy/power ranging from 60 keV/4 MW,80-100 keV/10 MW,to 200 keV/3 MW.This work conducts predictive analysis on core transport during the flat-top phase of EHL-2’s high-ion-temperature scenario utilizing ASTRA.The study delineates the potential operating range of core temperature and other parameters given the designed heating capacity.Specifically,the study presents predictive simulations based on CDBM,GLF23,Bohm-gyro-Bohm,and IFSPPPL transport models,evaluating the steady-state power balance,energy confinement time,and impact of various parameters such as plasma density and NBI power on core ion temperature.The simulations demonstrate that the design parameters of the EHL-2 high-Ti scenario,although sensitive to varying transport models,are hopefully attainable as long as adequate ion heating and controlled ion transport levels are ensured.
基金partly supported by SWIP project(No.SWIP-JYHT-12423).
文摘The EHL-2 spherical torus at ENN is the next-generation experimental platform under conceptual design,aiming at realizing proton-boron(p-^(11)B)thermonuclear fusion,which is an attractive pathway towards neutron-free fusion.To achieve high-performance steady-state plasma,it is extremely necessary to study the turbulence transport characteristics with high boron content in the plasma core.This study investigates the transport properties in the core internal transport barrier(ITB)region of p-^(11)B plasma utilizing the gyrokinetic code GENE in view of the high ion temperature scenario of EHL-2,specifically focusing on the impact of boron fractions and plasmaβon the microinstabilities and corresponding transport features.Numerical findings indicate that the inclusion of boron species effectively suppresses the trapped electron modes(TEMs)as well as promoting a transition from electromagnetic to electrostatic turbulence with increased boron fraction,which is a result of the suppression of microinstabilities by effective charge and mass.Moreover,it has been identified that the external E×B rotational shear has a notable inhibitory influence on transport,which can reduce the transport level by two to three orders of magnitude,especially at medium boron content.The suppressive effect of E×B on turbulence is weakened once the kinetic ballooning mode(KBM)is excited and the transport shows a rapid increase withβtogether with a reduction in zonal flow amplitude,which is consistent with previous findings.Therefore,it is strongly suggested that exploring advanced strategies for mitigating turbulent transport at highβregimes is necessary for the active control of plasma behavior regarding p-^(11)B plasma-based fusion devices such as EHL-2.
文摘The next generation fusion device listed on ENN’s fusion roadmap,named as(ENN He-Long)EHL-2,is under both physics and engineering designs.The instabilities of ideal magnetohydrodynamics(MHD)mode and neoclassical tearing mode(NTM)stabilized by electron cyclotron current drive(ECCD)for EHL-2’s two typical operation scenarios are analyzed.For high-ion-temperature operating(HITO)scenario,the vertical displacement event(VDE)could be a big challenge to the device safety.For the steady-state operating(SSO)scenario,the limitation may rise from the ideal MHD mode,NTM,etc.This suggests that the MHD analysis of both operation scenarios should be done with different focusing.Preliminary analysis based on the current physics and engineering design of both two scenarios is given in this paper.Based on the analysis result of above,the future assessments might target at active control method and the effect of boron on MHD activities.
基金supported by National Natural Science Foundation of China under Grant Nos.11005035,11475058the National Magnetic Confinement Fusion Science Program of China(ITERCN) under Grant Nos.2013GB104001 and 2013GB106004
文摘This paper reviews the energetic particle（EP） experiments during electron cyclotron resonance heating（ECRH） and neutral beam injection in the HL-2 A tokamak.A number of important results are summarized,which relate to ITER physics,including the behavior of the multi-mode instability,the nonlinear interaction between wave-wave and wave-particles,the losses of EP induced by the instabilities,the effect of the EP instabilities on the thermal plasma confinement and the control of the EP instabilities by means of ECRH.Systematic experiments indicate that when the drive is great enough,the nonlinear effects and the multi-mode coexistence may play an important role,which affect the transport both of the EPs and the background plasma confinement,and these instabilities could be controlled.Some new phenomena about the EP induced instabilities discovered recently on the device,such as high frequency reversed shear Alfvén eigenmodes,Alfvénic ion temperature gradient modes,the geodesic acoustic mode induced by energetic electrons excited by interaction between tearing mode and beta induced Alfvén eigenmode and double e-fishbone in negative magnetic shear discharges etc,have also been presented in the paper.
基金The authors acknowledge support from the European Regional Development Fund for the following projects:HiFI(No.CZ.02.1.01/0.0/0.0/15_003/0000449),CAAS(No.CZ.02.1.01/0.0/0.0/16_019/0000778),ADONIS(No.CZ.02.1.01/0.0/0.0/16_019/0000789),and ELITAS(No.CZ.02.1.01/0.0/0.0/16_013/0001793)This work has received funding from the European Union Horizon 2020 Research and Innovation Programme under Grant Agreement No.633053(EUROfusion Project No.CfP-AWP17-IFE-CEA-01)+2 种基金Computational resources were provided by the MetaCentrum under the LM2010005 projectIT4InnovationsCentre of Excellence under the CZ.1.05/1.1.00/02.0070 and LM2011033 projectsthe ECLIPSE cluster of ELI-Beamlines.The EPOCH code was developed as part of the UK EPSRC-funded EP/G054940/1 project.
文摘Comprehensive understanding and possible control of parametric instabilities in the context of inertial confinement fusion (ICF) remains achallenging task. The details of the absorption processes and the detrimental effects of hot electrons on the implosion process require as mucheffort on the experimental side as on the theoretical and simulation side. This paper describes a proposal for experimental studies on nonlinearinteraction of intense laser pulses with a high-temperature plasma under conditions corresponding to direct-drive ICF schemes. We propose todevelop a platform for laser-plasma interaction studies based on foam targets. Parametric instabilities are sensitive to the bulk plasma temperatureand the density scale length. Foam targets are sufficiently flexible to allow control of these parameters. However, investigationsconducted on small laser facilities cannot be extrapolated in a reliable way to real fusion conditions. It is therefore necessary to performexperiments at a multi-kilojoule energy level on medium-scale facilities such asOMEGAor SG-III. An example of two-plasmon decay instabilityexcited in the interaction of two laser beams is considered.
基金The authors acknowledge support from the projects“Advanced Research Using High Intensity Laser Produced Photons and Particles(ADONIS)”(Grant No.CZ.02.1.01/0.0/0.0/16_019/0000789)“High Field Initiative(HiFI)”(Grant No.CZ.02.1.01/0.0/0.0/15_003/0000449)both from the European Regional Development Fund.The results of the Project LQ1606 were obtained with financial support from the Ministry of Education,Youth and Sports as part of targeted support from the National Program of Sustainability II.
文摘The P3 installation of ELI-Beamlines is conceived as an experimental platform for multiple high-repetition-rate laser beams spanning time scales from femtosecond via picosecond to nanosecond.The upcoming L4n laser beamline will provide shaped nanosecond pulses of up to 1.9 kJ at a maximum repetition rate of 1 shot/min.This beamline will provide unique possibilities for high-pressure,high-energy-density physics,warm dense matter,and laser–plasma interaction experiments.Owing to the high repetition rate,it will become possible to obtain considerable improvements in data statistics,in particular,for equation-of-state data sets.The nanosecond beam will be coupled with short sub-picosecond pulses,providing high-resolution diagnostic tools by either irradiating a backlighter target or driving a betatron setup to generate energetic electrons and hard X-rays.
基金This project was partially supported by the Advanced Research Using High Intensity Laser Produced Photons and Particles(ADONIS)project(Grant No.CZ.02.1.01/0.0/0.0/16_019/0000789)the CAAS project(Grant No.CZ.02.1.01/0.0/0.0/16_019/0000778)+3 种基金both from the European Regional Development FundThe results of the LQ1606 project were partially obtained with the financial support from the Ministry of Education,Youth and Sports as part of targeted support from the National Programme of Sustainability IIThe authors acknowledge support from the National Natural Science Foundation of China(Grant Nos.11775033,11875241,11975215,11905204,12035002)the Laser Fusion Research Center Funds for Young Talents(Grant No.RCFPD3-2019-6).
文摘The physics of laser-plasma interaction is studied on the Shenguang III prototype laser facility under conditions relevant to inertial confinement fusion designs.A sub-millimeter-size underdense hot plasma is created by ionization of a low-density plastic foam by four high-energy(3.2 kJ)laser beams.An interaction beam is fired with a delay permitting evaluation of the excitation of parametric instabilities at different stages of plasma evolution.Multiple diagnostics are used for plasma characterization,scattered radiation,and accelerated electrons.The experimental results are analyzed with radiation hydrodynamic simulations that take account of foam ionization and homogenization.The measured level of stimulated Raman scattering is almost one order of magnitude larger than that measured in experiments with gasbags and hohlraums on the same installation,possibly because of a greater plasma density.Notable amplification is achieved in high-intensity speckles,indicating the importance of implementing laser temporal smoothing techniques with a large bandwidth for controlling laser propagation and absorption.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(No.2018YFE0310200)National Natural Science Foundation of China(Nos.11705242,11805138 and 12175156)the Fundamental Research Funds for the Central Universities in China(Nos.YJ201820 and YJ201954)。
文摘An E//B neutral particle analyzer(NPA)has been designed and is under development at Sichuan University and Southwestern Institute of Physics.The main purpose of the E//B NPA is to measure the distribution function of fast ions in the HL-2A/3 tokamak.The E//B NPA contains three main units,i.e.the stripping unit,the analyzing unit and the detection unit.A gas stripping chamber was adopted as the stripping unit.The results of the simulations and beam tests for the stripping chamber are presented.Parallel electric and magnetic fields provided by a NdFeB permanent magnet and two parallel electric plates were designed and constructed for the analyzing unit.The calibration of the magnetic and electric fields was performed using a 50 kV electron cyclotron resonance ion source(ECRIS)platform.The detection unit consists of 32lutetium-yttrium oxyorthosilicate(LYSO)detector modules arranged in two rows.The response functions ofα,hydrogen ions(H^(+),H_(2)^(+)and H_(3)^(+))andγfor a detector module were measured with^(241)Am,^(137)Cs and^(152)Eu sources together with the 50 kV ECRIS platform.The overall results indicate that the designed E//B NPA device is capable of measuring the intensity of neutral hydrogen and deuteron atoms with energy higher than 20 keV.
基金This work was supported by the National Natural Science Foundation of China(nos.21988102,and 22305026)the China Postdoctoral Science Foundation(2019M650433).
文摘The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.
基金Funded by Shenzhen-Hong Kong Innovative Collaborative Research and Development Program (Nos.SGLH20181109 110802117, CityU 9240014)Innovation Project of Southwestern Institute of Physics (Nos.202001XWCXYD002, 202301XWCX003)CNNC Young Talent Program (No.2023JZYF-01)。
文摘Surface metallization of glass fiber(GF)/polyetheretherketone(PEEK)[GF/PEEK] is conducted by coating copper using electroplating and magnetron sputtering and the properties are determined by X-ray diffraction(XRD), scanning electron microscopy(SEM), and electron backscatter diffraction(EBSD).The coating bonding strength is assessed by pull-out tests and scribing in accordance with GB/T 9286-1998.The results show that the Cu coating with a thickness of 30 μm deposited on GF/PEEK by magnetron sputtering has lower roughness, finer grain size, higher crystallinity, as well as better macroscopic compressive stress,bonding strength, and electrical conductivity than the Cu coating deposited by electroplating.
基金supports from the National Natural Science Foundation of China(12074123,12174108)the Foundation of‘Manufacturing beyond limits’of Shanghai‘Talent Program'of Henan Academy of Sciences.
文摘Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.
