As one of the naturally abundant elements, carbon can present in different molecular structures （allotropes） and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide ap...As one of the naturally abundant elements, carbon can present in different molecular structures （allotropes） and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry, optical, adsorption and catalysis, etc. On the other hand, its different allotropes also endow carbon-based materials with various morphostructures, which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures. In this review, we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials. Specifically, we focus on the development in the synthetic strategies, such as endotemplating, exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides, with an emphasis laid on the control of morphostructure. Meanwhile, the applications of the obtained materials will be highlighted, especially, in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.展开更多
Molecular adsorption of formate and carboxyl on stoichiometric CeO2（111） and CeO2（110） surfaces was studied using periodic density functional theory （DFT＋U） calculations. Two distinguishable adsorption modes （...Molecular adsorption of formate and carboxyl on stoichiometric CeO2（111） and CeO2（110） surfaces was studied using periodic density functional theory （DFT＋U） calculations. Two distinguishable adsorption modes （strong and weak） of formate are identified. The bidentate configuration is more stable than the monodentate adsorption configuration. Both formate and carboxyl bind at the more open CeO2（110） surface are stronger. The calculated vibrational frequencies of two adsorbed species are consistent with the experimental measurements. Fi- nally, the effects of U parameters on the adsorption of formate and carboxyl over both CeO2 surfaces were investigated. We found that the geometrical configurations of two adsorbed species are not affected by different U parameters （U = 0, 5, and 7）. However, the calculated ad- sorption energy of carboxyl pronouncedly increases with the U value while the adsorption energy of formate only slightly changes （〈0.2 eV）. The Bader charge analysis shows the opposite charge transfer occurs for formate and carboxyl adsorption where the adsorbed formate is neg- atively charge while the adsorbed carboxyl is positively charged. Interestingly, with the increasing U parameter, the amount of charge is also increased.展开更多
A series of Ag-ZrO_(2)/SiO_(2) catalysts with different metal-support interfaces were synthesized in an effort to elucidate the roles of specific interfaces in controlling the ethanol to 1,3-butadiene conversion and s...A series of Ag-ZrO_(2)/SiO_(2) catalysts with different metal-support interfaces were synthesized in an effort to elucidate the roles of specific interfaces in controlling the ethanol to 1,3-butadiene conversion and selectivity.According to the results of detailed characterizations(e.g.CO/pyridine-DRIFTS,XPS,TEM,NH3-TPD,and ^(1)H MAS NMR),it was found that the Ag-O-Si interfaces significantly enhanced the dehydrogenation of ethanol while the presence of ZrO_(2) improved the interaction between Ag and ZrO_(2)/SiO_(2),creating more Ag^(δ+)active sites.The high dispersion of ZrO_(2) on SiO_(2) generated abundant Zr-O-Si interfaces with medium and weak Lewis acidity,promoting the condensation of acetaldehyde to crotonaldehyde.These Zr-O-Si interfaces in close interaction with Ag^(δ+)species played a critical role in the enhanced H transfer during the MPV reduction of crotonaldehyde to crotyl alcohol.The synergies among the interfaces resulted in retarded ethanol dehydration reactivity,balanced ethanol dehydrogenation and condensation reactions,and a subsequent high 1,3-butadiene yield.展开更多
Alcohol transformation to transportation fuel-range hydrocarbon over HZSM-5 （SIO2/A1203 = 30） catalyst was studied at 360 C and 300 psig. Product distributions and catalyst life were compared between methanol, ethan...Alcohol transformation to transportation fuel-range hydrocarbon over HZSM-5 （SIO2/A1203 = 30） catalyst was studied at 360 C and 300 psig. Product distributions and catalyst life were compared between methanol, ethanol, 1-propanol and 1-butanol as a feed. The catalyst life for 1-propanol and l-butanol was more than double compared with that for methanol and ethanol. For all the alcohols studied, the product distributions （classified to paraffin, olefin, naphthene, aromatic and naphthalene compounds） varied with time on stream （TOS）. At 24 h TOS, liquid product from 1-propanol and 1-butanol transformation primarily contains higher olefin compounds. The alcohol transformation process to higher hydrocarbon involves a complex set of reaction pathways such as dehydration, oligomerization, dehydrocyclization and hydrogenation. Compared with ethylene generated from methanol and ethanol, oligomerization of propylene and butylene has a lower activation energy and can readily take place on weaker acidic sites. On the other hand, dehydrocyclization of the oligomerized products of propylene and butylene to form the cyclic compounds requires the sites with stronger acid strength. Combination of the above mentioned reasons are the primary reasons for olefin rich product generated in the later stage of the time on stream and for the extended catalyst life time for 1-propanol and 1-butanol compared with methanol and ethanol conversion over HZSM-5.展开更多
基金supported by the National Natural Science Foundation of China (21006024)Shanghai Key Laboratory of Molecular Catalysts and Innovative Materials,Department of Chemistry,Hehai University (No. 2010MCIMKF)+2 种基金Fundamental Research Funds for the Central Universities (WA0914023)CPNP Foundation (2011D-5006-0507)sponsored by the Shanghai Pujiang Program (11PJ1402600) for talented returnees
文摘As one of the naturally abundant elements, carbon can present in different molecular structures （allotropes） and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry, optical, adsorption and catalysis, etc. On the other hand, its different allotropes also endow carbon-based materials with various morphostructures, which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures. In this review, we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials. Specifically, we focus on the development in the synthetic strategies, such as endotemplating, exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides, with an emphasis laid on the control of morphostructure. Meanwhile, the applications of the obtained materials will be highlighted, especially, in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.
基金supported by the Laboratory Directed Research and Development(LDRD) Project of the Pacific Northwest National Laboratory(PNNL)The computations were performed using the Molecular Science Computing Facility in the William R.Wiley Environmental Molecular Sciences Laboratory (EMSL)+1 种基金a U.S.Department of Energy national scientific user facility located at PNNL in Richland,WashingtonPart of the computing time was also granted by the National Energy Research Scientific Computing Center(NERSC)
文摘Molecular adsorption of formate and carboxyl on stoichiometric CeO2（111） and CeO2（110） surfaces was studied using periodic density functional theory （DFT＋U） calculations. Two distinguishable adsorption modes （strong and weak） of formate are identified. The bidentate configuration is more stable than the monodentate adsorption configuration. Both formate and carboxyl bind at the more open CeO2（110） surface are stronger. The calculated vibrational frequencies of two adsorbed species are consistent with the experimental measurements. Fi- nally, the effects of U parameters on the adsorption of formate and carboxyl over both CeO2 surfaces were investigated. We found that the geometrical configurations of two adsorbed species are not affected by different U parameters （U = 0, 5, and 7）. However, the calculated ad- sorption energy of carboxyl pronouncedly increases with the U value while the adsorption energy of formate only slightly changes （〈0.2 eV）. The Bader charge analysis shows the opposite charge transfer occurs for formate and carboxyl adsorption where the adsorbed formate is neg- atively charge while the adsorbed carboxyl is positively charged. Interestingly, with the increasing U parameter, the amount of charge is also increased.
基金supported by the U.S.Department of Energy(DOE),Office of Basic Energy Sciences,Division of Chemical Sciences,Biosciences,and Geosciences Catalysis Program(DE-AC05-RL01830,FWP-47319)National Natural Science Foundation of China(21776268)Shandong Chambroad Holding Company。
文摘A series of Ag-ZrO_(2)/SiO_(2) catalysts with different metal-support interfaces were synthesized in an effort to elucidate the roles of specific interfaces in controlling the ethanol to 1,3-butadiene conversion and selectivity.According to the results of detailed characterizations(e.g.CO/pyridine-DRIFTS,XPS,TEM,NH3-TPD,and ^(1)H MAS NMR),it was found that the Ag-O-Si interfaces significantly enhanced the dehydrogenation of ethanol while the presence of ZrO_(2) improved the interaction between Ag and ZrO_(2)/SiO_(2),creating more Ag^(δ+)active sites.The high dispersion of ZrO_(2) on SiO_(2) generated abundant Zr-O-Si interfaces with medium and weak Lewis acidity,promoting the condensation of acetaldehyde to crotonaldehyde.These Zr-O-Si interfaces in close interaction with Ag^(δ+)species played a critical role in the enhanced H transfer during the MPV reduction of crotonaldehyde to crotyl alcohol.The synergies among the interfaces resulted in retarded ethanol dehydration reactivity,balanced ethanol dehydrogenation and condensation reactions,and a subsequent high 1,3-butadiene yield.
基金the Pacific Northwest National Laboratory's Laboratory Directed Research and Development Funding
文摘Alcohol transformation to transportation fuel-range hydrocarbon over HZSM-5 （SIO2/A1203 = 30） catalyst was studied at 360 C and 300 psig. Product distributions and catalyst life were compared between methanol, ethanol, 1-propanol and 1-butanol as a feed. The catalyst life for 1-propanol and l-butanol was more than double compared with that for methanol and ethanol. For all the alcohols studied, the product distributions （classified to paraffin, olefin, naphthene, aromatic and naphthalene compounds） varied with time on stream （TOS）. At 24 h TOS, liquid product from 1-propanol and 1-butanol transformation primarily contains higher olefin compounds. The alcohol transformation process to higher hydrocarbon involves a complex set of reaction pathways such as dehydration, oligomerization, dehydrocyclization and hydrogenation. Compared with ethylene generated from methanol and ethanol, oligomerization of propylene and butylene has a lower activation energy and can readily take place on weaker acidic sites. On the other hand, dehydrocyclization of the oligomerized products of propylene and butylene to form the cyclic compounds requires the sites with stronger acid strength. Combination of the above mentioned reasons are the primary reasons for olefin rich product generated in the later stage of the time on stream and for the extended catalyst life time for 1-propanol and 1-butanol compared with methanol and ethanol conversion over HZSM-5.
