With unique manufacturing technology,the additive manufacturing technology divides the three-dimensional object into countless two-dimensional laminates.Compared with the traditional material reduction manufacturing m...With unique manufacturing technology,the additive manufacturing technology divides the three-dimensional object into countless two-dimensional laminates.Compared with the traditional material reduction manufacturing method,it has the characteristics of saving materials,being fast,and especially suitable for single and small batch parts and the rapid manufacturing of parts with complex shapes and internal structures.In this paper,various methods of additive manufacturing technology are reviewed.This paper introduces the characteristics of selective laser melting technology and its forming equipment system.On this basis,the technical defects of selective laser melting technology are analyzed,and the status of controlling defects in SLM technology is explained.In the end,the prospects of additive manufacturing technology are described.展开更多
In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduce...In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.展开更多
Through laser swing welding of dissimilar steels,the microstructure and properties of welded joints of dissimilar steels under different heat treatment processes were investigated.In the test,the equilibrium phase dia...Through laser swing welding of dissimilar steels,the microstructure and properties of welded joints of dissimilar steels under different heat treatment processes were investigated.In the test,the equilibrium phase diagrams of the base materials 3Cr13 and VG10 were calculated by JMATPro software.The microstructures of the different regions of the welded joints after the original and heat treatment were analyzed by XRD and SEM,and the changes of the microhardness were tested.The test results show that a martensite-like structure is generated at the base material on the 3Cr13 side of the original welded joint,and a non-convective mixing zone exists in the fusion zone on the VG10 side.At this location,a block-like,island-like structure is embedded in the base material.There were lamellar carbide formation on this structure.After heat treatment,the amount of carbides in the welded joints is reduced,but the primary carbides in the VG10 base metal are difficult to eliminate by heat treatment.In addition,the lamellar carbides in the VG10 side fusion zone are polymerized to form network carbides.The hardness of the base metal near the fusion line on both sides of the original welded joint is relatively large,and the hardness of the heat affected zone gradually decreases with increasing distance from the center of the weld.After heat treatment,the overall hardness of the welded joint has increased significantly.Among them,the hardness increase is greatest at the quenching temperature of 1050°C,and VG10 can reach about 830 HV.展开更多
基金Sailing Plan in Guangdong Province(Grant No.2015YT02G090)Development of Additive Manufacturing Powder Materials and Preparation Technology(Grant No.2018002)+1 种基金Yangjiang High Power Laser Application Laboratory Construction(Grant No.2018057)Yangjiang High Power Laser Application Laboratory Co.,Ltd.supports the Construction of New R&D Institutions in the East and Northwest of Guangdong Province(Grant No.20180902).
文摘With unique manufacturing technology,the additive manufacturing technology divides the three-dimensional object into countless two-dimensional laminates.Compared with the traditional material reduction manufacturing method,it has the characteristics of saving materials,being fast,and especially suitable for single and small batch parts and the rapid manufacturing of parts with complex shapes and internal structures.In this paper,various methods of additive manufacturing technology are reviewed.This paper introduces the characteristics of selective laser melting technology and its forming equipment system.On this basis,the technical defects of selective laser melting technology are analyzed,and the status of controlling defects in SLM technology is explained.In the end,the prospects of additive manufacturing technology are described.
基金supported by Guangdong Science and Technology Plan Project(Grant No.20170902,No.20180902)Yangjiang Science and Technology Plan Project(Grant No.SDZX2020063)+1 种基金Shenzhen Key Projects of Innovation and Entrepreneurship Plan Technology(JSGG20210420091802007)Yunfu 2023 Science and Technology Plan Project(S2023020201).
文摘In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.
基金Development of High-end Manufacturing Equipment and Materials for the Metal Knife and Scissors Industry in Yangjiang(510224133196)Yangjiang High Power Laser Application Laboratory Co.,Ltd.Supports the Construction of New Research and Development Institutions in the East and West of Guangdong(809099997119)Development of Additive Manufacturing Technology for Blade Laser Cladding(2017036)。
文摘Through laser swing welding of dissimilar steels,the microstructure and properties of welded joints of dissimilar steels under different heat treatment processes were investigated.In the test,the equilibrium phase diagrams of the base materials 3Cr13 and VG10 were calculated by JMATPro software.The microstructures of the different regions of the welded joints after the original and heat treatment were analyzed by XRD and SEM,and the changes of the microhardness were tested.The test results show that a martensite-like structure is generated at the base material on the 3Cr13 side of the original welded joint,and a non-convective mixing zone exists in the fusion zone on the VG10 side.At this location,a block-like,island-like structure is embedded in the base material.There were lamellar carbide formation on this structure.After heat treatment,the amount of carbides in the welded joints is reduced,but the primary carbides in the VG10 base metal are difficult to eliminate by heat treatment.In addition,the lamellar carbides in the VG10 side fusion zone are polymerized to form network carbides.The hardness of the base metal near the fusion line on both sides of the original welded joint is relatively large,and the hardness of the heat affected zone gradually decreases with increasing distance from the center of the weld.After heat treatment,the overall hardness of the welded joint has increased significantly.Among them,the hardness increase is greatest at the quenching temperature of 1050°C,and VG10 can reach about 830 HV.
