In the non-uniform stress field, the surrounding rock plastic zone of the circular roadway shows different shapes under the different confining pressure conditions. Based on the boundary shape characteristics of the p...In the non-uniform stress field, the surrounding rock plastic zone of the circular roadway shows different shapes under the different confining pressure conditions. Based on the boundary shape characteristics of the plastic zone, the characteristic radii of the plastic zone were proposed, namely the horizontal,longitudinal and medial axis radii, which could reflect the plastic zone shapes characteristics and classify the sizes of the key parts. On the theoretical basis of elastic-plastic mechanics, analytical solutions for the characteristic radii were obtained by theoretical deduction, and the relationships between the characteristic radii and key influencing factors were analyzed. Finally, the evaluation criterion of the circular roadway surrounding rock plastic zone shapes, evaluation criterion of the location of potential hazards caused by the roadway surrounding rock and evaluation critical points of roadway dynamic disasters based on characteristic radii were proposed. This work could provide a theoretical basis for stability analysis of the surrounding rock, support design, and guide the prevention and control of dynamic roadway disasters.展开更多
Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are stu...Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are studied in this paper using mechanical calculations, numerical analysis and field measurements, A mechanical model of deep beam structure subjected to multiple loading is established, including analysis of roof support in the return airway of S1203 working face in the Yuwu coal mine, China, The expression of maximum shear stress in the deep beam structure is deduced according to the stress superposition criterion, It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing, The variation of maximum shear stress distribution and prestressed field diffusion effects according to various factors are analyzed using Matlah and FLAC3DTM software, and practical support parameters of the S1203 return airway roof are determined, According to the observations of rock pressure, there is no evidence of roof separation, and the maximum values of roof subsidence and convergence of wall rock are 72 and 48 mm, respectively, The results show that the proposed roof support design with a deep beam structure is feasible and achieves effective control of the roadway roof,展开更多
For spontaneous combustion possibilities under large flux methane drainage in the goal, dynamic permeability in combination with the Forchheimer nonlinear equation was used to solve the problem of 3D oxygen distributi...For spontaneous combustion possibilities under large flux methane drainage in the goal, dynamic permeability in combination with the Forchheimer nonlinear equation was used to solve the problem of 3D oxygen distribution, heating law in goaf and to forecast the effects of fire protection by taking the fifth section face of the No. 18 coal seam in Nanshan Coal Mine as the basis for this study. The results demonstrate that if the vertical position of the drainage laneway is so low as to cause serious air leakage, a high oxygen concentration area exists in the return side of the goaf, and there is also a high temperature region which has faster heating rate than in the other areas. The effect of methane drainage on goal heating can be alleviated dramatically by simultaneous plugging and nitrogen injection. The results show that gas data in the return side of the goaf must be detected carefully in the work face, which is of similar drainage arrangement. Therefore, comprehensive fire protection measures should be carried out if conditions permit.展开更多
77 K nitrogen adsorption was the most widely used technique for determining surface area and pore size distribution of coal. Brunauer–Emmett–Teller(BET) and Barrett–Joyner–Halenda(BJH) model are commonly used anal...77 K nitrogen adsorption was the most widely used technique for determining surface area and pore size distribution of coal. Brunauer–Emmett–Teller(BET) and Barrett–Joyner–Halenda(BJH) model are commonly used analytic methods for adsorption/desorption isotherm. A Chinese anthracite coal is tested in this study using an improved experimental method and adsorption isotherm analyzed by three adsorption mechanisms at different relative pressure stages. The result shows that the micropore filling adsorption predominates at the relative pressure stage from 6.8E 7 to 9E 3. Theoretically, BET and BJH model are not appropriate for analyzing coal samples which contain micropores. Two new analytic procedures for coal surface area and pore size distribution calculation are developed in this work. The results show that BET model underestimates surface area, and micropores smaller than 1.751 nm account for 35.5% of the total pore volume and 74.2% of the total surface area. The investigation of surface area and pore size distribution by incorporating the influence of micropore is significant for understanding adsorption mechanism of methane and carbon dioxide in coal.展开更多
The influence of gas drainage on float coal spontaneous combustion in the work face with ＂U＂ style ventilation was studied. Numerical simulation was used to compare the mutative law of steady flow and density field ...The influence of gas drainage on float coal spontaneous combustion in the work face with ＂U＂ style ventilation was studied. Numerical simulation was used to compare the mutative law of steady flow and density field in the gob area under different drainage conditions by solving the equation set, including mass, momentum, and component transition. Consequently, the sequence of drainage effect and safety was obtained. The result manifests that the more effective the drainage pattern is, the easier float coal spontaneous combustion is caused due to air being guided into the depth of the gob area when the drainage position is arranged in the gas accumulation area. If the widened scope of oxidation zone exceeds the upper limit of the work face advancing speed, nitrogen injection should be applied to decrease the probability of spontaneous combustion. Then, the pipe laying drainage in the upper angle is most economical and safe compared with other drainage patterns when only the situation of gas accumulation is controlled in the upper angle. Finally, drainage pressure must not be too great. Otherwise the drainage density will decrease even if hazard is caused by back flow possibly happening in the return outlet when the drainage position is arranged near the work face.展开更多
This study was performed to investigate the spectral characteristics of micro-seismic signals observed during the rupture of coal. Coal rupture micro-seismic observations were obtained on a test system that included a...This study was performed to investigate the spectral characteristics of micro-seismic signals observed during the rupture of coal. Coal rupture micro-seismic observations were obtained on a test system that included an electro-hydraulic servo pressure tester controlled by a YAW microcomputer, a micro-seismic sensor, a loading system, and a signal collection system. The results show that the micro-seismic signal increases with increasing compressive stress at the beginning of coal rupture. The signal remains stable for a period at this stage. A large number of micro-seismic signals appear immediately before the main rupture event. The frequency of micro-seismic events reaches a maximum immediately after the coal ruptures. Micro-seismic signals were decomposed into several Intrinsic Mode Functions (IMF's) by the empirical mode decomposition (EMD) method using a Hilbert-Huang transform (HHT). The main fre- quency band of the micro-seismic signals was found to range from 10 to 100 Hz in the Hilbert energy spectrum and from marginal spectrum calculations. The advantage of applying an HHT is that this can extract the main features of the signal. This fact was confirmed by an HHT analysis of the coal micro-seis- mic signals that shows the technique is useful in the field of coal rupture.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 51234006)the National Key Research and Development Program of China (Grant No. 2016YFC0600708)
文摘In the non-uniform stress field, the surrounding rock plastic zone of the circular roadway shows different shapes under the different confining pressure conditions. Based on the boundary shape characteristics of the plastic zone, the characteristic radii of the plastic zone were proposed, namely the horizontal,longitudinal and medial axis radii, which could reflect the plastic zone shapes characteristics and classify the sizes of the key parts. On the theoretical basis of elastic-plastic mechanics, analytical solutions for the characteristic radii were obtained by theoretical deduction, and the relationships between the characteristic radii and key influencing factors were analyzed. Finally, the evaluation criterion of the circular roadway surrounding rock plastic zone shapes, evaluation criterion of the location of potential hazards caused by the roadway surrounding rock and evaluation critical points of roadway dynamic disasters based on characteristic radii were proposed. This work could provide a theoretical basis for stability analysis of the surrounding rock, support design, and guide the prevention and control of dynamic roadway disasters.
基金provided by the National Natural Science Foundation of China (Nos. 51504259 and 51234005)the Fundamental Research Funds for the Central Universities (No. 2010QZ06)
文摘Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are studied in this paper using mechanical calculations, numerical analysis and field measurements, A mechanical model of deep beam structure subjected to multiple loading is established, including analysis of roof support in the return airway of S1203 working face in the Yuwu coal mine, China, The expression of maximum shear stress in the deep beam structure is deduced according to the stress superposition criterion, It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing, The variation of maximum shear stress distribution and prestressed field diffusion effects according to various factors are analyzed using Matlah and FLAC3DTM software, and practical support parameters of the S1203 return airway roof are determined, According to the observations of rock pressure, there is no evidence of roof separation, and the maximum values of roof subsidence and convergence of wall rock are 72 and 48 mm, respectively, The results show that the proposed roof support design with a deep beam structure is feasible and achieves effective control of the roadway roof,
文摘For spontaneous combustion possibilities under large flux methane drainage in the goal, dynamic permeability in combination with the Forchheimer nonlinear equation was used to solve the problem of 3D oxygen distribution, heating law in goaf and to forecast the effects of fire protection by taking the fifth section face of the No. 18 coal seam in Nanshan Coal Mine as the basis for this study. The results demonstrate that if the vertical position of the drainage laneway is so low as to cause serious air leakage, a high oxygen concentration area exists in the return side of the goaf, and there is also a high temperature region which has faster heating rate than in the other areas. The effect of methane drainage on goal heating can be alleviated dramatically by simultaneous plugging and nitrogen injection. The results show that gas data in the return side of the goaf must be detected carefully in the work face, which is of similar drainage arrangement. Therefore, comprehensive fire protection measures should be carried out if conditions permit.
基金the China Scholarship Council and the Natural Science Foundation of China (No. 51174212)
文摘77 K nitrogen adsorption was the most widely used technique for determining surface area and pore size distribution of coal. Brunauer–Emmett–Teller(BET) and Barrett–Joyner–Halenda(BJH) model are commonly used analytic methods for adsorption/desorption isotherm. A Chinese anthracite coal is tested in this study using an improved experimental method and adsorption isotherm analyzed by three adsorption mechanisms at different relative pressure stages. The result shows that the micropore filling adsorption predominates at the relative pressure stage from 6.8E 7 to 9E 3. Theoretically, BET and BJH model are not appropriate for analyzing coal samples which contain micropores. Two new analytic procedures for coal surface area and pore size distribution calculation are developed in this work. The results show that BET model underestimates surface area, and micropores smaller than 1.751 nm account for 35.5% of the total pore volume and 74.2% of the total surface area. The investigation of surface area and pore size distribution by incorporating the influence of micropore is significant for understanding adsorption mechanism of methane and carbon dioxide in coal.
基金Supported by the National Natural Science Foundation of China （51074168） the Specialized Fund for the Basic Research Operating Expenses Program of Central College（2010QZ03）
文摘The influence of gas drainage on float coal spontaneous combustion in the work face with ＂U＂ style ventilation was studied. Numerical simulation was used to compare the mutative law of steady flow and density field in the gob area under different drainage conditions by solving the equation set, including mass, momentum, and component transition. Consequently, the sequence of drainage effect and safety was obtained. The result manifests that the more effective the drainage pattern is, the easier float coal spontaneous combustion is caused due to air being guided into the depth of the gob area when the drainage position is arranged in the gas accumulation area. If the widened scope of oxidation zone exceeds the upper limit of the work face advancing speed, nitrogen injection should be applied to decrease the probability of spontaneous combustion. Then, the pipe laying drainage in the upper angle is most economical and safe compared with other drainage patterns when only the situation of gas accumulation is controlled in the upper angle. Finally, drainage pressure must not be too great. Otherwise the drainage density will decrease even if hazard is caused by back flow possibly happening in the return outlet when the drainage position is arranged near the work face.
基金support for this work provided by the National Science and Technology Planning Project (No. 2009BAK54B03)the National Natural Science Foundation of China (No. 50834005)
文摘This study was performed to investigate the spectral characteristics of micro-seismic signals observed during the rupture of coal. Coal rupture micro-seismic observations were obtained on a test system that included an electro-hydraulic servo pressure tester controlled by a YAW microcomputer, a micro-seismic sensor, a loading system, and a signal collection system. The results show that the micro-seismic signal increases with increasing compressive stress at the beginning of coal rupture. The signal remains stable for a period at this stage. A large number of micro-seismic signals appear immediately before the main rupture event. The frequency of micro-seismic events reaches a maximum immediately after the coal ruptures. Micro-seismic signals were decomposed into several Intrinsic Mode Functions (IMF's) by the empirical mode decomposition (EMD) method using a Hilbert-Huang transform (HHT). The main fre- quency band of the micro-seismic signals was found to range from 10 to 100 Hz in the Hilbert energy spectrum and from marginal spectrum calculations. The advantage of applying an HHT is that this can extract the main features of the signal. This fact was confirmed by an HHT analysis of the coal micro-seis- mic signals that shows the technique is useful in the field of coal rupture.
