Biomass-derived heteroatom self-doped cathode catalysts has attracted considerable interest for electrochemical advanced oxidation processes(EAOPs)due to its high performance and sustainable synthesis.Herein,we illust...Biomass-derived heteroatom self-doped cathode catalysts has attracted considerable interest for electrochemical advanced oxidation processes(EAOPs)due to its high performance and sustainable synthesis.Herein,we illustrated the morphological fates of waste leaf-derived graphitic carbon(WLGC)produced from waste ginkgo leaves via pyrolysis temperature regulation and used as bifunctional cathode catalyst for simultaneous H_(2)O_(2) electrochemical generation and organic pollutant degradation,discovering S/N-self-doping shown to facilitate a synergistic effect on reactive oxygen species(ROS)generation.Under the optimum temperature of 800℃,the WLGC exhibited a H_(2)O_(2) selectivity of 94.2%and tetracycline removal of 99.3%within 60 min.Density functional theory calculations and in-situ Fourier transformed infrared spectroscopy verified that graphitic N was the critical site for H_(2)O_(2) generation.While pyridinic N and thiophene S were the main active sites responsible for OH generation,N vacancies were the active sites to produce ^(1)O_(2) from O_(2).The performance of the novel cathode for tetracycline degradation remains well under a wide pH range(3–11),maintaining excellent stability in 10 cycles.It is also industrially applicable,achieving satisfactory performance treating in real water matrices.This system facilitates both radical and non-radical degradation,offering valuable advances in the preparation of cost-effective and sustainable electrocatalysts and hold strong potentials in metal-free EAOPs for organic pollutant degradation.展开更多
Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibi...Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.展开更多
Rechargeable lithium-ion batteries(LIBs)afford a profound impact on our modern daily life.However,LIBs are approaching the theoretical energy density,due to the inherent limitations of intercalation chemistry;thus,the...Rechargeable lithium-ion batteries(LIBs)afford a profound impact on our modern daily life.However,LIBs are approaching the theoretical energy density,due to the inherent limitations of intercalation chemistry;thus,they cannot further satisfy the increasing demands of portable electronics,electric vehicles,and grids.Therefore,battery chemistries beyond LIBs are being widely investigated.Next-generation lithium(Li)batteries,which employ Li metal as the anode and intercalation or conversion materials as the cathode,receive the most intensive interest due to their high energy density and excellent potential for commercialization.Moreover,significant progress has been achieved in Li batteries attributed to the increasing fundamental understanding of the materials and reactions,as well as to technological improvement.This review starts by summarizing the electrolytes for next-generation Li batteries.Key challenges and recent progress in lithium-ion,lithium–sulfur,and lithium–oxygen batteries are then reviewed from the perspective of energy and chemical engineering science.Finally,possible directions for further development in Li batteries are presented.Next-generation Li batteries are expected to promote the sustainable development of human civilization.展开更多
Electrochemical reduction of CO_(2)(CO_(2)RR)has become a research hot spot in recent years in the context of carbon neutrality.HCOOH is one of the most promising products obtained by electrochemical reduction of CO_(...Electrochemical reduction of CO_(2)(CO_(2)RR)has become a research hot spot in recent years in the context of carbon neutrality.HCOOH is one of the most promising products obtained by electrochemical reduction of CO_(2) due to its high energy value as estimated by market price per energy unit and wide application in chemical industry.Biomass is the most abundant renewable resource in the natural world.Coupling biomass oxidative conversion with CO_(2)RR driven by renewable electricity would well achieve carbon negativity.In this work,we comprehensively reviewed the current research progress on CO_(2)RR to produce HCOOH and coupled system for conversion of biomass and its derivatives to produce value-added products.Sn-and Bi-based electrocatalysts are discussed for CO_(2)RR with regards to the structure of the catalyst and reaction mechanisms.Electro-oxidation reactions of biomass derived sugars,alcohols,furan aldehydes and even polymeric components of lignocellulose were reviewed as alternatives to replace oxygen evolution reaction(OER)in the conventional electrolysis process.It was recommended that to further improve the efficiency of the coupled system,future work should be focused on the development of more efficient and stable catalysts,careful design of the electrolytic cells for improving the mass transfer and development of environment-friendly processes for recovering the formed formate and biomass oxidation products.展开更多
Plasma-based processes,particularly in carbon capture and utilization,hold great potential for addressing environmental challenges and advancing a circular carbon economy.While significant progress has been made in un...Plasma-based processes,particularly in carbon capture and utilization,hold great potential for addressing environmental challenges and advancing a circular carbon economy.While significant progress has been made in understanding plasma-induced reactions,plasma-catalyst interactions,and reactor development to enhance energy efficiency and conversion,there remains a notable gap in research concerning overall process development.This review emphasizes the critical need for considerations at the process level,including integration and intensification,to facilitate the industrialization of plasma technology for chemical production.Discussions centered on the development of plasma-based processes are made with a primary focus on CO_(2) conversion,offering insights to guide future work for the transition of the technology from laboratory scale to industrial applications.Identification of current research gaps,especially in upscaling and integrating plasma reactors with other process units,is the key to addressing critical issues.The review further delves into relevant research in process evaluation and assessment,providing methodological insights and highlighting key factors for comprehensive economic and sustainability analyses.Additionally,recent advancements in novel plasma systems are reviewed,presenting unique advantages and innovative concepts that could reshape the future of process development.This review provides essential information for navigating the path forward,ensuring a comprehensive understanding of challenges and opportunities in the development of plasma-based CCU process.展开更多
Anode materials for rechargeable electric car batteries are obtained from Li-metal owing to their extremely high specific capacity and low redox potential.Unfortunately,safety concerns related to dendrite formation on...Anode materials for rechargeable electric car batteries are obtained from Li-metal owing to their extremely high specific capacity and low redox potential.Unfortunately,safety concerns related to dendrite formation on the anode surface caused by the uneven distribution of Li-ions during the discharge process interfere with the use of Li-metal in industrial batteries.In this study,methyl vinyl sulfone(MVS),a sulfone-based functional electrolyte additive,is used in an additive engineering strategy to control Lielectrolyte interactions and address the aforementioned problems.Li dendrite growth may be restricted,and transition metal degradation on the surface of the cathode can be reduced by the MVS-derived functional electrolyte additive interfacial layer.The electrochemical performance of an ethylene carbonate/dimethyl carbonate(EC/DMC)+1 wt% MVS Li-metal anode of a Li||Li symmetric cell exhibits remarkable cycle stability,maintaining a low overvoltage for over 750 h at 1 mA cm^(-2),and capacity of 1 mA h cm^(-2).Additionally,LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) full cells with the MVS additive exhibit enhanced electrochemical stability for 250 cycles at a current density of 100 mA g^(-1).This study provides an innovative approach for stabilizing the metal-electrolyte interfacial layer that may be used for practical applications in metal-based rechargeable batteries.展开更多
Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in or...Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in order to improve this ranking. To do this, certain physico-chemical parameters of soil samples from Friguiagbé and Maferinyah (in the Kindia and Forécariah prefectures) were taken and analysed using the following techniques: Pipette de Robinson, Anne, Bray II, Kapen HICDVITZ, Mc. Lead (1982). The analytical results show that the soils at Friguiagbé in Kindia and Maferinyah in Forécariah are acidic, with pH values of 4.4 and 4.7 (fields I and II) and 4.8 and 4.7 (fields I and II) respectively. The soils have a silty-sandy texture. This study could therefore serve as a guide for the Ministry of Agriculture of the Republic of Guinea.展开更多
The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emiss...The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emissions.Developing high-efficient,low-cost,energy-efficient and eco-friendly microfluidicbased microchemical engineering is of great significance.Such kind of“green microfluidics”can reduce carbon emissions from the source of raw materials and facilitate controllable and intensified microchemical engineering processes,which represents the new power for the transformation and upgrading of chemical engineering industry.Here,a brief review of green microfluidics for achieving carbon neutral microchemical engineering is presented,with specific discussions about the characteristics and feasibility of applying green microfluidics in realizing carbon neutrality.Development of green microfluidic systems are categorized and reviewed,including the construction of microfluidic devices by bio-based substrate materials and by low carbon fabrication methods,and the use of more biocompatible and nondestructive fluidic systems such as aqueous two-phase systems(ATPSs).Moreover,low carbon applications benefit from green microfluidics are summarized,ranging from separation and purification of biomolecules,high-throughput screening of chemicals and drugs,rapid and cost-effective detections,to synthesis of fine chemicals and novel materials.Finally,challenges and perspectives for further advancing green microfluidics in microchemical engineering for carbon neutrality are proposed and discussed.展开更多
Small coin cell batteries are predominantly used for testing lithium-ion batteries(LIBs)in academia because they require small amounts of material and are easy to assemble.However,insufficient attention is given to di...Small coin cell batteries are predominantly used for testing lithium-ion batteries(LIBs)in academia because they require small amounts of material and are easy to assemble.However,insufficient attention is given to difference in cell performance that arises from the differences in format between coin cells used by academic researchers and pouch or cylindrical cells which are used in industry.In this article,we compare coin cells and pouch cells of different size with exactly the same electrode materials,electrolyte,and electrochemical conditions.We show the battery impedance changes substantially depending on the cell format using techniques including Electrochemical Impedance Spectroscopy(EIS)and Galvanostatic Intermittent Titration Technique(GITT).Using full cell NCA-graphite LIBs,we demonstrate that this difference in impedance has important knock-on effects on the battery rate performance due to ohmic polarization and the battery life time due to Li metal plating on the anode.We hope this work will help researchers getting a better idea of how small coin cell formats impact the cell performance and help predicting improvements that can be achieved by implementing larger cell formats.展开更多
Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly aff...Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.展开更多
An organic geochemical,petrographical,and palynological evaluation was conducted on 30 claystone outcrop samples of the Toraja Formation,along with a geochemical analysis of an oil seep in the Enrekang Sub-basin.The a...An organic geochemical,petrographical,and palynological evaluation was conducted on 30 claystone outcrop samples of the Toraja Formation,along with a geochemical analysis of an oil seep in the Enrekang Sub-basin.The aim of the study was to determine the correlation between oil and source rock in terms of age,depositional environment,organic material sources,and maturity level.The total organic carbon content of the claystone samples varies from 0.03 to 4.52 wt%,which are classified as poor to excellent.The claystones are immature to post-mature with a mixture of TypeⅡandⅢkerogen.Their vitrinite reflectance values range from 0.47 to 4.52%Ro.The samples of Toraja Formation rock and the oil seep source rock might have a similar depositional environment,a deltaic marine depositional setting with high oxidizing conditions.Organic material sources for rock and oil samples are dominated by terrestrial input.The oil is inferred to have originated from the Paleogene source rocks,which correlates in age with the Toraja Formation.The recovered palynomorphs from the studied rock samples suggest a late Eocene to Oligocene age with a strong terrestrial influence of shallow marine depositional setting.The biomarker analysis shows that the rock samples have a more substantial contribution from the terrigenous higher plants,while the oil sample indicates a higher degree of marine influence.The maturity levels are also different between the oil(peak mature)and the analyzed rock samples(immature).It is inferred that the oil seep source rock is equivalent to the analyzed rock sample but more mature,having been deposited under more marine conditions.The oil seep source rock is not exposed and is located in the deeper part of the basin.A deeper marine facies(i.e.distal delta front and prodelta facies)in front of the distributary mouth bar within a delta is interpreted as the source rock of the oil seep sample.展开更多
Analyses of the characteristics and properties of biocoke fuel from several biomass wastes were carried out to determine the energy potential of the fuel.Biocoke production in this research uses heating and pressure m...Analyses of the characteristics and properties of biocoke fuel from several biomass wastes were carried out to determine the energy potential of the fuel.Biocoke production in this research uses heating and pressure methods simultaneously under constant conditions.Experimental results using thermogravimetric analysis show that biocoke empty-fruit-bunches(EFB)have a higher energy potential of 26.57 MJ/kg.Meanwhile,mangrove biocoke recorded the lowest ash content at 1.81%compared to EFB at 5.09%.The carbon content of mangrove biocoke is 58.02%,slightly higher than that of EFB,56.70%,but EFB is higher than that of other biomass.Overall,the energy content recorded in biocoke increased significantly compared to raw biomass.展开更多
Soft(flexible and stretchable) biosensors have great potential in real-time and continuous health monitoring of various physiological factors, mainly due to their better conformability to soft human tissues and organs...Soft(flexible and stretchable) biosensors have great potential in real-time and continuous health monitoring of various physiological factors, mainly due to their better conformability to soft human tissues and organs, which maximizes data fidelity and minimizes biological interference.Most of the early soft sensors focused on sensing physical signals. Recently, it is becoming a trend that novel soft sensors are developed to sense and monitor biochemical signals in situ in real biological environments, thus providing much more meaningful data for studying fundamental biology and diagnosing diverse health conditions. This is essential to decentralize the healthcare resources towards predictive medicine and better disease management. To meet the requirements of mechanical softness and complex biosensing, unconventional materials, and manufacturing process are demanded in developing biosensors. In this review, we summarize the fundamental approaches and the latest and representative design and fabrication to engineer soft electronics(flexible and stretchable) for wearable and implantable biochemical sensing. We will review the rational design and ingenious integration of stretchable materials, structures, and signal transducers in different application scenarios to fabricate high-performance soft biosensors. Focus is also given to how these novel biosensors can be integrated into diverse important physiological environments and scenarios in situ, such as sweat analysis, wound monitoring, and neurochemical sensing. We also rethink and discuss the current limitations,challenges, and prospects of soft biosensors. This review holds significant importance for researchers and engineers, as it assists in comprehending the overarching trends and pivotal issues within the realm of designing and manufacturing soft electronics for biochemical sensing.展开更多
The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control thi...The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.展开更多
Pineapple fruit in the Republic of Guinea is currently less competitive in the West African sub-region due to the nutritional quality of the product.Thus,it is normal to review certain parameters such as:sensory,physi...Pineapple fruit in the Republic of Guinea is currently less competitive in the West African sub-region due to the nutritional quality of the product.Thus,it is normal to review certain parameters such as:sensory,physico-chemical in order to improve this classification.To do this,instead of buying samples on the market,the aim is to analyze fresh samples harvested in the production fields and send them to the laboratory for analysis of certain physico-chemical and microbiological parameters.Analytical results showed that the Brix content in fields I and II at Maferinyah(Forécariah)was higher(14.35 and 16.5)than that found in fields I and II at Friguiagbé(Kindia)(14.2 and 12.4),The pH of fruit from both localities varies between 3.48 and 3.56,with the highest acidity value found in Field I at Friguiagbé(Kindia)2.16 and the lowest value in Field II at Maferinyah(Forécariah)0.46.Moisture contents for both localities ranged from 82.56 to 89.5,with the highest value found at Field I in Maferinyah(Forécariah)89.5.Dry extract and ash in both localities would be in the range 10.54 to 17.45;0.33 to 1.43 respectively.The highest values for dry extract and ash were found in Fields I and II Friguiagbé(Kindia)17.45 and 1.43.The samples analyzed contained certain trace elements such as magnesium,sodium,iron and phosphorus.Microbiological analyses showed the presence of Escherichia coli(E.coli),yeast-molds,Staphylococcus aureus and the absence of salmonella.展开更多
Rare-earth elements （REEs） are essential metals for the design and development of sustainable energy applications, Recycling these elements from waste streams enriched in them is crucial for securing an independent ...Rare-earth elements （REEs） are essential metals for the design and development of sustainable energy applications, Recycling these elements from waste streams enriched in them is crucial for securing an independent future supply for sustainable applications, This study compares the mechanisms of mechan- ical activation prior to a hydrometallurgical acid-leaching process and a solvometallurgical mechanochemical leaching process for the recovery of REEs from green lamp phosphor, LaPO4：Ce3＋, Th3＋, After 60 min of processing time, the REE leaching rates showed a significant enhancement of 60% after cycled mechanical activation, and 98% after the combined mechanochemical leaching process, High-resolution transmission electron microscopy （HR-TEM） imaging disclosed the cause for the improved REE leaching rates： The improved leaching and leaching patterns could he attributed to changes in the crystal morphology from monocrystalline to polycrystalline, Reduction of the crystallite size to the nanoscale in a polycrystalline material creates irregular packing of chemical units, resulting in an increase in defect-rich grain boundaries in the crystals, which enhances the leaching process, A solvometallurgical method was developed to combine the mechanical activation and leaching process into a single step, which is beneficial for operational cost, This results in an efficient and simple process that provides an alternative and greener recycling route for lamp phosphor waste,展开更多
The high porosity and tunable chemical functionality of metal-organic frameworks(MOFs)make it a promising catalyst design platform.High-throughput screening of catalytic performance is feasible since the large MOF str...The high porosity and tunable chemical functionality of metal-organic frameworks(MOFs)make it a promising catalyst design platform.High-throughput screening of catalytic performance is feasible since the large MOF structure database is available.In this study,we report a machine learning model for high-throughput screening of MOF catalysts for the CO_(2) cycloaddition reaction.The descriptors for model training were judiciously chosen according to the reaction mechanism,which leads to high accuracy up to 97%for the 75%quantile of the training set as the classification criterion.The feature contribution was further evaluated with SHAP and PDP analysis to provide a certain physical understanding.12,415 hypothetical MOF structures and 100 reported MOFs were evaluated under 100℃ and 1 bar within one day using the model,and 239 potentially efficient catalysts were discovered.Among them,MOF-76(Y)achieved the top performance experimentally among reported MOFs,in good agreement with the prediction.展开更多
A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength...A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength.The optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface methodology.The effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious materials.The best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%quercetin.The compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,respectively.The initial time and final setting time are 41 and 57 minutes,respectively.According to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.展开更多
In South Saharan countries, 85% of the population uses biomass as a primary energy source. Cameroon presents one of the highest biomass energy and sawmills produce important sawdust resources which are not used and ar...In South Saharan countries, 85% of the population uses biomass as a primary energy source. Cameroon presents one of the highest biomass energy and sawmills produce important sawdust resources which are not used and are burnt in piles leading to significant air toxic emissions. Therefore, we have to valorize industrially these available sawdusts. This study focuses on the physicochemical and thermochemical analysis of Ayous, Sapelli and Tali sawdust. The proximate and ultimate analysis, particle size, structural composition, as well as heavy metal content and calorific value were determined. In addition, the thermogravimetric mass losses were also estimated. The results showed that high water contents (24% - 41%) were recorded in the raw sawdust, and the thermal treatment reduced these contents from 78% to values in the range of 4% - 9%. The values for ash and volatile matter content were respectively between 0.25% - 0.74% and 68% - 76%. The LHV is higher in Ayous (17.5 MJ/kg) and Sapelli (16.8 MJ/kg) than that of Tali (15.7 MJ/kg). The concentration of heavy metals is very low in each species. Extractives are more present in Tali (16.06%) than in the other sawdusts. Pyrolysis of sawdust shows the typical decomposition of hemicellulose (270˚C - 325˚C), cellulose (325˚C - 400˚C) and lignin (200˚C - 550˚C) with a maximum loss of 75% at 370˚C and the melting point is 320˚C. The results of the sawdust parameters determined in the paper can be valorized to reduce pollutants emissions by developing the efficiency and effectiveness of biomass energy processes and promoting the use of biomass as a sustainable alternative to traditional fossil fuels.展开更多
The chemical and mineralogical composition of bauxite deposits is a key factor in the profitability of refining processes. The study of bauxites from the Saföfö site has assessed variations in chemical and m...The chemical and mineralogical composition of bauxite deposits is a key factor in the profitability of refining processes. The study of bauxites from the Saföfö site has assessed variations in chemical and mineralogical composition under various conditions, as well as the optimum conditions for their exploitation. The methodologies used in this study include experimental methods for determining moisture content, chemical composition, mineralogical composition, and specific density of bauxite. The results show significant variation in moisture content among the bauxite samples, with values ranging from 2.90% to 17.80%. The silica percentages in the samples range from 1.69% to 8.14%, while alumina percentages vary from 36.81% to 54.03%. After calcination, alumina oxide percentages range from 40% to 75%. After chemical activation, alumina oxides Al2O3 range from 40% to over 50%. Gibbsite is the most abundant mineral, accounting for about 60% - 70% of the total composition of the bauxite samples. Samples A to F have bulk densities varying between approximately 3.6 and 3.9. Sample B has the highest density, around 3.9, while sample C has the lowest, at around 3.5. Bauxite mining at the Saföfö site offers significant potential for the alumina industry, provided appropriate processing methods are selected to maximize quality and profitability while minimizing environmental impact.展开更多
基金financially supported by National Key R&D Program International Cooperation Project(2023YFE0108100)Natural Science Foundation of China(No.52170085)+2 种基金Key Project of Natural Science Foundation of Tianjin(No.21JCZDJC00320)Tianjin Post-graduate Students Research and Innovation Project(2021YJSB013)Fundamental Research Funds for the Central Universities,Nankai University.
文摘Biomass-derived heteroatom self-doped cathode catalysts has attracted considerable interest for electrochemical advanced oxidation processes(EAOPs)due to its high performance and sustainable synthesis.Herein,we illustrated the morphological fates of waste leaf-derived graphitic carbon(WLGC)produced from waste ginkgo leaves via pyrolysis temperature regulation and used as bifunctional cathode catalyst for simultaneous H_(2)O_(2) electrochemical generation and organic pollutant degradation,discovering S/N-self-doping shown to facilitate a synergistic effect on reactive oxygen species(ROS)generation.Under the optimum temperature of 800℃,the WLGC exhibited a H_(2)O_(2) selectivity of 94.2%and tetracycline removal of 99.3%within 60 min.Density functional theory calculations and in-situ Fourier transformed infrared spectroscopy verified that graphitic N was the critical site for H_(2)O_(2) generation.While pyridinic N and thiophene S were the main active sites responsible for OH generation,N vacancies were the active sites to produce ^(1)O_(2) from O_(2).The performance of the novel cathode for tetracycline degradation remains well under a wide pH range(3–11),maintaining excellent stability in 10 cycles.It is also industrially applicable,achieving satisfactory performance treating in real water matrices.This system facilitates both radical and non-radical degradation,offering valuable advances in the preparation of cost-effective and sustainable electrocatalysts and hold strong potentials in metal-free EAOPs for organic pollutant degradation.
基金supported by National Natural Science Foundation of China(Grant No.U1930113),ChinaNational Natural Science Foundation of China(52072036)
文摘Poly(ethylene oxide)(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage cathodes.Therefore,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt(LiHFDF)/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high voltage.We show,by manipulating the interaction between PEO matrix and TFSI^(-)-HFDF^(-),the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10^(-4)S cm^(-1)at 40℃,which is almost 3 times of the baseline.Also,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO_(4)/Li and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)/Li(3.0-4.4 V,200 cycles)based all-solid-state lithium batteries at 40℃.
基金the National Key Research and Development Program(2016YFA0202500 and 2016YFA0200102)the National Natural Science Foundation of China(21676160,21776019,and 21825501)the Tsinghua University Initiative Scientific Research Program.
文摘Rechargeable lithium-ion batteries(LIBs)afford a profound impact on our modern daily life.However,LIBs are approaching the theoretical energy density,due to the inherent limitations of intercalation chemistry;thus,they cannot further satisfy the increasing demands of portable electronics,electric vehicles,and grids.Therefore,battery chemistries beyond LIBs are being widely investigated.Next-generation lithium(Li)batteries,which employ Li metal as the anode and intercalation or conversion materials as the cathode,receive the most intensive interest due to their high energy density and excellent potential for commercialization.Moreover,significant progress has been achieved in Li batteries attributed to the increasing fundamental understanding of the materials and reactions,as well as to technological improvement.This review starts by summarizing the electrolytes for next-generation Li batteries.Key challenges and recent progress in lithium-ion,lithium–sulfur,and lithium–oxygen batteries are then reviewed from the perspective of energy and chemical engineering science.Finally,possible directions for further development in Li batteries are presented.Next-generation Li batteries are expected to promote the sustainable development of human civilization.
基金supported by the National Key R&D Program of China(2022YFA2105900)the National Natural Science Foundation of China(No.22178197)。
文摘Electrochemical reduction of CO_(2)(CO_(2)RR)has become a research hot spot in recent years in the context of carbon neutrality.HCOOH is one of the most promising products obtained by electrochemical reduction of CO_(2) due to its high energy value as estimated by market price per energy unit and wide application in chemical industry.Biomass is the most abundant renewable resource in the natural world.Coupling biomass oxidative conversion with CO_(2)RR driven by renewable electricity would well achieve carbon negativity.In this work,we comprehensively reviewed the current research progress on CO_(2)RR to produce HCOOH and coupled system for conversion of biomass and its derivatives to produce value-added products.Sn-and Bi-based electrocatalysts are discussed for CO_(2)RR with regards to the structure of the catalyst and reaction mechanisms.Electro-oxidation reactions of biomass derived sugars,alcohols,furan aldehydes and even polymeric components of lignocellulose were reviewed as alternatives to replace oxygen evolution reaction(OER)in the conventional electrolysis process.It was recommended that to further improve the efficiency of the coupled system,future work should be focused on the development of more efficient and stable catalysts,careful design of the electrolytic cells for improving the mass transfer and development of environment-friendly processes for recovering the formed formate and biomass oxidation products.
文摘Plasma-based processes,particularly in carbon capture and utilization,hold great potential for addressing environmental challenges and advancing a circular carbon economy.While significant progress has been made in understanding plasma-induced reactions,plasma-catalyst interactions,and reactor development to enhance energy efficiency and conversion,there remains a notable gap in research concerning overall process development.This review emphasizes the critical need for considerations at the process level,including integration and intensification,to facilitate the industrialization of plasma technology for chemical production.Discussions centered on the development of plasma-based processes are made with a primary focus on CO_(2) conversion,offering insights to guide future work for the transition of the technology from laboratory scale to industrial applications.Identification of current research gaps,especially in upscaling and integrating plasma reactors with other process units,is the key to addressing critical issues.The review further delves into relevant research in process evaluation and assessment,providing methodological insights and highlighting key factors for comprehensive economic and sustainability analyses.Additionally,recent advancements in novel plasma systems are reviewed,presenting unique advantages and innovative concepts that could reshape the future of process development.This review provides essential information for navigating the path forward,ensuring a comprehensive understanding of challenges and opportunities in the development of plasma-based CCU process.
基金supported by the Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE) (P0017012, Human Resource Development Program for Industrial Innovation)the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (RS2024-00411892)。
文摘Anode materials for rechargeable electric car batteries are obtained from Li-metal owing to their extremely high specific capacity and low redox potential.Unfortunately,safety concerns related to dendrite formation on the anode surface caused by the uneven distribution of Li-ions during the discharge process interfere with the use of Li-metal in industrial batteries.In this study,methyl vinyl sulfone(MVS),a sulfone-based functional electrolyte additive,is used in an additive engineering strategy to control Lielectrolyte interactions and address the aforementioned problems.Li dendrite growth may be restricted,and transition metal degradation on the surface of the cathode can be reduced by the MVS-derived functional electrolyte additive interfacial layer.The electrochemical performance of an ethylene carbonate/dimethyl carbonate(EC/DMC)+1 wt% MVS Li-metal anode of a Li||Li symmetric cell exhibits remarkable cycle stability,maintaining a low overvoltage for over 750 h at 1 mA cm^(-2),and capacity of 1 mA h cm^(-2).Additionally,LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) full cells with the MVS additive exhibit enhanced electrochemical stability for 250 cycles at a current density of 100 mA g^(-1).This study provides an innovative approach for stabilizing the metal-electrolyte interfacial layer that may be used for practical applications in metal-based rechargeable batteries.
文摘Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in order to improve this ranking. To do this, certain physico-chemical parameters of soil samples from Friguiagbé and Maferinyah (in the Kindia and Forécariah prefectures) were taken and analysed using the following techniques: Pipette de Robinson, Anne, Bray II, Kapen HICDVITZ, Mc. Lead (1982). The analytical results show that the soils at Friguiagbé in Kindia and Maferinyah in Forécariah are acidic, with pH values of 4.4 and 4.7 (fields I and II) and 4.8 and 4.7 (fields I and II) respectively. The soils have a silty-sandy texture. This study could therefore serve as a guide for the Ministry of Agriculture of the Republic of Guinea.
基金the supports of the National Science Foundation of China (22008130, 22025801)the China Postdoctoral Science Foundation (2020M682124)+1 种基金the Qingdao Postdoctoral Researchers Applied Research Project Foundation (RZ2000001426)the Scientific Research Foundation for Youth Scholars from Qingdao University (DC1900014265) for this work
文摘The concept of“carbon neutrality”poses a huge challenge for chemical engineering and brings great opportunities for boosting the development of novel technologies to realize carbon offsetting and reduce carbon emissions.Developing high-efficient,low-cost,energy-efficient and eco-friendly microfluidicbased microchemical engineering is of great significance.Such kind of“green microfluidics”can reduce carbon emissions from the source of raw materials and facilitate controllable and intensified microchemical engineering processes,which represents the new power for the transformation and upgrading of chemical engineering industry.Here,a brief review of green microfluidics for achieving carbon neutral microchemical engineering is presented,with specific discussions about the characteristics and feasibility of applying green microfluidics in realizing carbon neutrality.Development of green microfluidic systems are categorized and reviewed,including the construction of microfluidic devices by bio-based substrate materials and by low carbon fabrication methods,and the use of more biocompatible and nondestructive fluidic systems such as aqueous two-phase systems(ATPSs).Moreover,low carbon applications benefit from green microfluidics are summarized,ranging from separation and purification of biomolecules,high-throughput screening of chemicals and drugs,rapid and cost-effective detections,to synthesis of fine chemicals and novel materials.Finally,challenges and perspectives for further advancing green microfluidics in microchemical engineering for carbon neutrality are proposed and discussed.
基金funding from the ERC(Consolidator Grant MIGHTY,866005)the Innovate UK(UKRI:104174)Faraday Institution-Future CAT(FIRG017)and Degradation(FIRG001)
文摘Small coin cell batteries are predominantly used for testing lithium-ion batteries(LIBs)in academia because they require small amounts of material and are easy to assemble.However,insufficient attention is given to difference in cell performance that arises from the differences in format between coin cells used by academic researchers and pouch or cylindrical cells which are used in industry.In this article,we compare coin cells and pouch cells of different size with exactly the same electrode materials,electrolyte,and electrochemical conditions.We show the battery impedance changes substantially depending on the cell format using techniques including Electrochemical Impedance Spectroscopy(EIS)and Galvanostatic Intermittent Titration Technique(GITT).Using full cell NCA-graphite LIBs,we demonstrate that this difference in impedance has important knock-on effects on the battery rate performance due to ohmic polarization and the battery life time due to Li metal plating on the anode.We hope this work will help researchers getting a better idea of how small coin cell formats impact the cell performance and help predicting improvements that can be achieved by implementing larger cell formats.
基金the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(grant nos.2021R1C1C1007844,2021M3I3A1085039,2020R1F1A1061505,and 2020R1C1C1012014).
文摘Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.
基金provided by Universitas Muslim Indonesia tothe first author(AAB).
文摘An organic geochemical,petrographical,and palynological evaluation was conducted on 30 claystone outcrop samples of the Toraja Formation,along with a geochemical analysis of an oil seep in the Enrekang Sub-basin.The aim of the study was to determine the correlation between oil and source rock in terms of age,depositional environment,organic material sources,and maturity level.The total organic carbon content of the claystone samples varies from 0.03 to 4.52 wt%,which are classified as poor to excellent.The claystones are immature to post-mature with a mixture of TypeⅡandⅢkerogen.Their vitrinite reflectance values range from 0.47 to 4.52%Ro.The samples of Toraja Formation rock and the oil seep source rock might have a similar depositional environment,a deltaic marine depositional setting with high oxidizing conditions.Organic material sources for rock and oil samples are dominated by terrestrial input.The oil is inferred to have originated from the Paleogene source rocks,which correlates in age with the Toraja Formation.The recovered palynomorphs from the studied rock samples suggest a late Eocene to Oligocene age with a strong terrestrial influence of shallow marine depositional setting.The biomarker analysis shows that the rock samples have a more substantial contribution from the terrigenous higher plants,while the oil sample indicates a higher degree of marine influence.The maturity levels are also different between the oil(peak mature)and the analyzed rock samples(immature).It is inferred that the oil seep source rock is equivalent to the analyzed rock sample but more mature,having been deposited under more marine conditions.The oil seep source rock is not exposed and is located in the deeper part of the basin.A deeper marine facies(i.e.distal delta front and prodelta facies)in front of the distributary mouth bar within a delta is interpreted as the source rock of the oil seep sample.
基金support in the form of a research grant by Badan Pengelola Dana Perkebunan Kelapa Sawit(BPDPKS)with grant number(PRJ-374/DPKS/2022,PRJ-17/DPKS/2023Lembaga Penelitian dan Pengabdian Masyarakat(LPPM-USK)with grand number 192/UN11.2.1/PT.01.03/PNBP/2023).
文摘Analyses of the characteristics and properties of biocoke fuel from several biomass wastes were carried out to determine the energy potential of the fuel.Biocoke production in this research uses heating and pressure methods simultaneously under constant conditions.Experimental results using thermogravimetric analysis show that biocoke empty-fruit-bunches(EFB)have a higher energy potential of 26.57 MJ/kg.Meanwhile,mangrove biocoke recorded the lowest ash content at 1.81%compared to EFB at 5.09%.The carbon content of mangrove biocoke is 58.02%,slightly higher than that of EFB,56.70%,but EFB is higher than that of other biomass.Overall,the energy content recorded in biocoke increased significantly compared to raw biomass.
基金support from the National Science Foundation under Award Nos. EFMA-2318057, ECCS-2339495, ECCS-2334134, ECCS-2216131, and CMMI-2323917。
文摘Soft(flexible and stretchable) biosensors have great potential in real-time and continuous health monitoring of various physiological factors, mainly due to their better conformability to soft human tissues and organs, which maximizes data fidelity and minimizes biological interference.Most of the early soft sensors focused on sensing physical signals. Recently, it is becoming a trend that novel soft sensors are developed to sense and monitor biochemical signals in situ in real biological environments, thus providing much more meaningful data for studying fundamental biology and diagnosing diverse health conditions. This is essential to decentralize the healthcare resources towards predictive medicine and better disease management. To meet the requirements of mechanical softness and complex biosensing, unconventional materials, and manufacturing process are demanded in developing biosensors. In this review, we summarize the fundamental approaches and the latest and representative design and fabrication to engineer soft electronics(flexible and stretchable) for wearable and implantable biochemical sensing. We will review the rational design and ingenious integration of stretchable materials, structures, and signal transducers in different application scenarios to fabricate high-performance soft biosensors. Focus is also given to how these novel biosensors can be integrated into diverse important physiological environments and scenarios in situ, such as sweat analysis, wound monitoring, and neurochemical sensing. We also rethink and discuss the current limitations,challenges, and prospects of soft biosensors. This review holds significant importance for researchers and engineers, as it assists in comprehending the overarching trends and pivotal issues within the realm of designing and manufacturing soft electronics for biochemical sensing.
基金the Portuguese Foundation for Science and Technology (scholarship SFRH/BD/18731/2004 and Research Project Grant POCI/EQU/59305/2004).
文摘The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.
文摘Pineapple fruit in the Republic of Guinea is currently less competitive in the West African sub-region due to the nutritional quality of the product.Thus,it is normal to review certain parameters such as:sensory,physico-chemical in order to improve this classification.To do this,instead of buying samples on the market,the aim is to analyze fresh samples harvested in the production fields and send them to the laboratory for analysis of certain physico-chemical and microbiological parameters.Analytical results showed that the Brix content in fields I and II at Maferinyah(Forécariah)was higher(14.35 and 16.5)than that found in fields I and II at Friguiagbé(Kindia)(14.2 and 12.4),The pH of fruit from both localities varies between 3.48 and 3.56,with the highest acidity value found in Field I at Friguiagbé(Kindia)2.16 and the lowest value in Field II at Maferinyah(Forécariah)0.46.Moisture contents for both localities ranged from 82.56 to 89.5,with the highest value found at Field I in Maferinyah(Forécariah)89.5.Dry extract and ash in both localities would be in the range 10.54 to 17.45;0.33 to 1.43 respectively.The highest values for dry extract and ash were found in Fields I and II Friguiagbé(Kindia)17.45 and 1.43.The samples analyzed contained certain trace elements such as magnesium,sodium,iron and phosphorus.Microbiological analyses showed the presence of Escherichia coli(E.coli),yeast-molds,Staphylococcus aureus and the absence of salmonella.
基金supported by KU Leuven (GOA/13/008 and IOFKP RARE3)FWO-Flanders for a SB PhD fellowship (1S23518N)the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme: Grant Agreement 694078-Solvometallurgy for critical metals (SOLCRIMET)
文摘Rare-earth elements （REEs） are essential metals for the design and development of sustainable energy applications, Recycling these elements from waste streams enriched in them is crucial for securing an independent future supply for sustainable applications, This study compares the mechanisms of mechan- ical activation prior to a hydrometallurgical acid-leaching process and a solvometallurgical mechanochemical leaching process for the recovery of REEs from green lamp phosphor, LaPO4：Ce3＋, Th3＋, After 60 min of processing time, the REE leaching rates showed a significant enhancement of 60% after cycled mechanical activation, and 98% after the combined mechanochemical leaching process, High-resolution transmission electron microscopy （HR-TEM） imaging disclosed the cause for the improved REE leaching rates： The improved leaching and leaching patterns could he attributed to changes in the crystal morphology from monocrystalline to polycrystalline, Reduction of the crystallite size to the nanoscale in a polycrystalline material creates irregular packing of chemical units, resulting in an increase in defect-rich grain boundaries in the crystals, which enhances the leaching process, A solvometallurgical method was developed to combine the mechanical activation and leaching process into a single step, which is beneficial for operational cost, This results in an efficient and simple process that provides an alternative and greener recycling route for lamp phosphor waste,
基金financial support from the National Key Research and Development Program of China(2021YFB 3501501)the National Natural Science Foundation of China(No.22225803,22038001,22108007 and 22278011)+1 种基金Beijing Natural Science Foundation(No.Z230023)Beijing Science and Technology Commission(No.Z211100004321001).
文摘The high porosity and tunable chemical functionality of metal-organic frameworks(MOFs)make it a promising catalyst design platform.High-throughput screening of catalytic performance is feasible since the large MOF structure database is available.In this study,we report a machine learning model for high-throughput screening of MOF catalysts for the CO_(2) cycloaddition reaction.The descriptors for model training were judiciously chosen according to the reaction mechanism,which leads to high accuracy up to 97%for the 75%quantile of the training set as the classification criterion.The feature contribution was further evaluated with SHAP and PDP analysis to provide a certain physical understanding.12,415 hypothetical MOF structures and 100 reported MOFs were evaluated under 100℃ and 1 bar within one day using the model,and 239 potentially efficient catalysts were discovered.Among them,MOF-76(Y)achieved the top performance experimentally among reported MOFs,in good agreement with the prediction.
基金Funded by the Key Technologies Research and Development Program(No.2021YFC28000900)the National Natural Science Foundation of China(No.52374178)the Collaborative Innovation Project of Colleges and Universities of Anhui Province(No.GXXT-2020-057)。
文摘A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength.The optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface methodology.The effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious materials.The best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%quercetin.The compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,respectively.The initial time and final setting time are 41 and 57 minutes,respectively.According to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.
文摘In South Saharan countries, 85% of the population uses biomass as a primary energy source. Cameroon presents one of the highest biomass energy and sawmills produce important sawdust resources which are not used and are burnt in piles leading to significant air toxic emissions. Therefore, we have to valorize industrially these available sawdusts. This study focuses on the physicochemical and thermochemical analysis of Ayous, Sapelli and Tali sawdust. The proximate and ultimate analysis, particle size, structural composition, as well as heavy metal content and calorific value were determined. In addition, the thermogravimetric mass losses were also estimated. The results showed that high water contents (24% - 41%) were recorded in the raw sawdust, and the thermal treatment reduced these contents from 78% to values in the range of 4% - 9%. The values for ash and volatile matter content were respectively between 0.25% - 0.74% and 68% - 76%. The LHV is higher in Ayous (17.5 MJ/kg) and Sapelli (16.8 MJ/kg) than that of Tali (15.7 MJ/kg). The concentration of heavy metals is very low in each species. Extractives are more present in Tali (16.06%) than in the other sawdusts. Pyrolysis of sawdust shows the typical decomposition of hemicellulose (270˚C - 325˚C), cellulose (325˚C - 400˚C) and lignin (200˚C - 550˚C) with a maximum loss of 75% at 370˚C and the melting point is 320˚C. The results of the sawdust parameters determined in the paper can be valorized to reduce pollutants emissions by developing the efficiency and effectiveness of biomass energy processes and promoting the use of biomass as a sustainable alternative to traditional fossil fuels.
文摘The chemical and mineralogical composition of bauxite deposits is a key factor in the profitability of refining processes. The study of bauxites from the Saföfö site has assessed variations in chemical and mineralogical composition under various conditions, as well as the optimum conditions for their exploitation. The methodologies used in this study include experimental methods for determining moisture content, chemical composition, mineralogical composition, and specific density of bauxite. The results show significant variation in moisture content among the bauxite samples, with values ranging from 2.90% to 17.80%. The silica percentages in the samples range from 1.69% to 8.14%, while alumina percentages vary from 36.81% to 54.03%. After calcination, alumina oxide percentages range from 40% to 75%. After chemical activation, alumina oxides Al2O3 range from 40% to over 50%. Gibbsite is the most abundant mineral, accounting for about 60% - 70% of the total composition of the bauxite samples. Samples A to F have bulk densities varying between approximately 3.6 and 3.9. Sample B has the highest density, around 3.9, while sample C has the lowest, at around 3.5. Bauxite mining at the Saföfö site offers significant potential for the alumina industry, provided appropriate processing methods are selected to maximize quality and profitability while minimizing environmental impact.
