This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FG...This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FGP)materials.The strain potential and kinetic energies of each beam along with the work done by the external force are calculated.Additionally,a higher-order beam element is introduced to derive stiffness and mass matrices,along with the force vector.The curved and straight beams are discretized,and their assembled stiffness,mass matrices,and force vectors,are obtained.Continuity conditions at the joints are used to derive the total matrices of the entire structure.Subsequently,the natural frequencies and transient response of the system are determined.The accuracy of the mathematical model and the self-developed computer program is validated through the comparison of the obtained results with those of the existing literature and commercial software ANSYS,demonstrating excellent agreement.Furthermore,a comprehensive study is conducted to investigate the effects of various parameters on the free vibration and transient response of the considered structure.展开更多
Magnesium(Mg)and its alloys have recently gained increasing attention in the biomedical field as promising biodegradable materials with harmless degradation products.Magnesium-based alloys have a wide range of biomedi...Magnesium(Mg)and its alloys have recently gained increasing attention in the biomedical field as promising biodegradable materials with harmless degradation products.Magnesium-based alloys have a wide range of biomedical applications because of their outstanding biocompatibility and unique mechanical properties.Widespread use of Mg-based biomedical devices eliminates the need for post-healing biomaterial removal surgery and minimizes the negative consequences of the implantation of permanent biomaterials,including stress shielding and undesired metal ion release in the body.This paper provides a literature review on the properties and manufacturing methods of Mgbased alloys for biomedical applications,including orthopedic implants,cardiovascular applications,surgical wires and staplers,and antitumor activities.Each application of Mg-based biomaterials is investigated from a biological perspective,including matching functional properties,biocompatibility,host tissue responses,and anti-microbial strategies,along with potential additive manufacturing technologies for these applications.Finally,an outlook is presented to provide recommendations for Mg-based biomaterials in the future.展开更多
This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic ...This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic Al-Si alloy deposited on a commercially pure aluminum substrate.The results show that regardless of the consumable rod’s heat treatment conditions,the coating’s efficiency has increased with the increase in heat input,so the coating efficiency increases by 20%and 30%in the solid solution-treated rod and the artificially aged rod,respectively.By increasing the heat input,the average grain size in the coating fabricated by solid solution-treated rod and artificially aged rod increased from 0.1 to 0.9μm and from 0.2 to 1.3μm,respectively.At constant heat input,the average hardness and wear resistance of the coating created in the solid solution-treated rod are lower than those of the artificially aged rod.By decreasing heat input,the wear loss in the coating fabricated by solid solution-treated rod and artificially aged rod decreased by 10%and 20%,respectively,reaching 0.1 and 0.03μg/m.展开更多
Coal waste(CW)could be used for soil stabilization due to the pozzolanic elements it contains.There hasn’t been much investigation into how different fibers affect the mechanical qualities of stabilized sand,although...Coal waste(CW)could be used for soil stabilization due to the pozzolanic elements it contains.There hasn’t been much investigation into how different fibers affect the mechanical qualities of stabilized sand,although adding fibers of any kind to soils may improve the soil because of fiber characteristics like rigidity.For this reason,several tests were carried out on sand that contained 6%cement(by dry weight of used sand),5 wt%CW,0 wt%,0.25 wt%,and 0.50 wt%fiber,as well as the unconfined compressive strength(UCS)test,indirect tensile strength(ITS)test,unconsolidated undrained(UU)triaxial test,scanning electron microscope(SEM)test and ultrasonic pulse velocity(UPV)test.The results showed that in comparison to other fiber reinforced mix designs,the specimen reinforced with 0.5%fibers and the mix design of 0.25 wt%glass and 0.25 wt%polypropylene(PP)fibers exhibited the maximum strength.Examining the impact of fiber type found that glass fibers influence PP strength more favorably than other fiber types.The use of PP fibers is an excellent solution for the problem of large strains in design processes,while adding glass fibers is considered a suitable treatment for issues related to small strains.展开更多
Right-turn collisions at intersections are one of the most dominant crash types in suburban areas,especially at unsignalized intersections.There is,however,a lack of comprehensive research on the speed patterns of veh...Right-turn collisions at intersections are one of the most dominant crash types in suburban areas,especially at unsignalized intersections.There is,however,a lack of comprehensive research on the speed patterns of vehicles during right-turn manoeuvres and their impacts on crashes.To provide an in-depth investigation of the factors determining the safety of right-turn manoeuvres,driving behavior data were collected through an instrumented vehicle study.Using this data,binary logistic regression models were developed to identify the factors affecting the probability of vehicle-vehicle(V-V)and vehicle-pedestrian(V-P)conflicts at six suburban intersections in Babol,Iran,during right-turn stage manoeuvres.In total,1456 V-V and V-P conflicts were identified from the data analysis.The results from the logistic regression model showed that the vehicle speed,the distance between road users,as well as driver and pedestrian distractions were associated with a higher risk for V-V or V-P conflicts.To estimate the safe right-turn speeds to be selected by drivers at different stages of the right turn,i.e.,at the start,during,and end of the movement,linear regression models were developed.The results showed that participants adjust their driving behaviors the same way toward pedestrians as they do toward vehicles.The findings of this study can be leveraged for the development of a robust advanced driving assistance system,the use of which can further improve the safety performance of right-turn manoeuvres.展开更多
Dissimilar joints comprised of copper–nickel and steel alloys are a challenge for manufacturers in modern industries, as these metals are not thermomechanically or chemically well matched. The present study investiga...Dissimilar joints comprised of copper–nickel and steel alloys are a challenge for manufacturers in modern industries, as these metals are not thermomechanically or chemically well matched. The present study investigated the effects of tool rotational speed and linear speed on the microstructure and mechanical properties of friction stir-welded C71000 copper–nickel and 340 stainless steel alloys using a tungsten carbide tool with a cylindrical pin. The results indicated that a rotational-to-linear speed ratio of 12.5 r/mm did not cause any macro defects, whereas some tunneling defects and longitudinal cracks were found at other ratios that were lower and higher. Furthermore, chromium carbide was formed on the grain boundaries of the 304 stainless steel near the shoulder zone and inside the joint zone, directing carbon and chromium penetration toward the grain boundaries. Tensile strength and elongation percentages were 84% and 65% of the corresponding values in the copper–nickel base metal, respectively.展开更多
The lattice Boltzmann method （LBM） is used to examine free convection of nanofluids. The space between the cold outer square and heated inner circular cylinders is filled with water including various kinds of nanopa...The lattice Boltzmann method （LBM） is used to examine free convection of nanofluids. The space between the cold outer square and heated inner circular cylinders is filled with water including various kinds of nanoparticles： TiO2, Ag, Cu, and A1203. The Brinkman and Maxwell-Garnetts models are used to simulate the viscosity and the effective thermal conductivity of nanofluids, respectively. Results from the performed numerical analysis show good agreement with those obtained from other numerical meth- ods. A variety of the Rayleigh number, the nanoparticle volume fraction, and the aspect ratio are examined. According to the results, choosing copper as the nanoparticle leads to obtaining the highest enhancement for this problem. The results also indicate that the maximum value of enhancement occurs at λ =2.5 when Ra = 106 while at A = 1.5 for other Rayleigh numbers.展开更多
The purpose of the present research is to determine the tensile strength and elongation of the A390 alloy processed by ECAP and to reveal the relationship between the microstructure and tensile properties. Optical mic...The purpose of the present research is to determine the tensile strength and elongation of the A390 alloy processed by ECAP and to reveal the relationship between the microstructure and tensile properties. Optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for microstructural analysis of the samples. The results of the mechanical testing showed that the ultimate tensile strength (UTS) increased from 142 MPa for the as-cast sample to 275 MPa for the sample after the third ECAP pass. Increasing the ECAP passes up to 4 led to a remarkable enhancement of elongation compared with the as-cast sample. It was found that the improvement of strength and ductility of A390 alloy with increasing the number of ECAP passes was attributed to the homogenous distribution of particles, reduction of particle size, and elimination of voids especially adjacent to the primary silicon particles. The results of fractography demonstrated that when the number of ECAP passes increased to 4, the uniform round dimples formed and the relatively brittle as-cast sample transformed to a ductile alloy.展开更多
The Mg-6Al-4Zn alloy was fabricated by mechanical alloying(MA)and hot pressing to serve as biodegradable metal implant.The influence of addition of 1%Si(mass fraction)on the microstructure,mechanical properties and bi...The Mg-6Al-4Zn alloy was fabricated by mechanical alloying(MA)and hot pressing to serve as biodegradable metal implant.The influence of addition of 1%Si(mass fraction)on the microstructure,mechanical properties and bio-corrosion behavior of Mg-6Al-1Zn alloy was studied using X-ray diffractometry,transmission electron microscopy,compression test,as well as immersion,electrochemical test and MTT assay.The results showed that the addition of 1%Si to Mg-6Al-1Zn alloy led to the formation of fine Mg2Si phase with polygonal shape,and increased compressive strength,elongation and improved corrosion resistance.Furthermore,the cell viability of Saos-2 cells has been improved by addition of 1%Si to Mg-6Al-1Zn alloy.According to the results,the magnesium ions released in the methylthiazol tetrazolium(MTT)test have not shown any cell toxicity.All these indicated that the addition of 1%Si improved the properties of Mg-6Al-4Zn alloy for using as a biodegradable implant.展开更多
The effect of diamond-like carbon(DLC)coating(fabricated by cathodic arc deposition)on mechanical properties,tribological behavior and corrosion performance of the Ni−Al−bronze(NAB)alloy was investigated.Nano-hardness...The effect of diamond-like carbon(DLC)coating(fabricated by cathodic arc deposition)on mechanical properties,tribological behavior and corrosion performance of the Ni−Al−bronze(NAB)alloy was investigated.Nano-hardness and pin-on-plate test showed that DLC coating had a greater hardness compared with NAB alloy.Besides,the decrease in friction coefficient from 0.2 for NAB substrate to 0.13 for the DLC-coated sample was observed.Potentiodynamic polarization and EIS results showed that the corrosion current density decreased from 2.5μA/cm2 for bare NAB alloy to 0.14μA/cm2 for DLC-coated sample in 3.5 wt.%NaCl solution.Moreover,the charge transfer resistance at the substrate−electrolyte interface increased from 3.3 kΩ·cm2 for NAB alloy to 120.8 kΩ·cm2 for DLC-coated alloy,which indicated an increase in corrosion resistance due to the DLC coating.展开更多
The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing proc...The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing process. To carry out this investigation, Ag was added by 5.3, 10.6, and 16.0 wt.% to an AA2024 consumable rod by inserting holes in it. It was found that due to the strengthening by solid solution and the formation of precipitates and intermetallic containing Ag, the driving force for grain growth is reduced and consequently the grain size of the coating is decreased. After artificial aging heat treatment, the electrical conductivities of the coatings containing 0 and 16.0 wt.% Ag are increased by 4.15%(IACS) and decreased by 2.15%(IACS), respectively. While considering a linear relationship, it can be proposed that for a 1 wt.% Ag increase, the strength and hardness of the coating will be increased by 1.8% and 1.0%, respectively. It was established that the effect of Al6(Cu,Ag)Mg4 precipitate formation on strengthening is greater than that of Ag-rich intermetallic.展开更多
Aluminum A390 alloys reinforced with 10 wt.%SiC composite,were produced by the compocasting method.The effects of temperature,time,and stirring speed of this compocasting method on the microstructure,mechanical and tr...Aluminum A390 alloys reinforced with 10 wt.%SiC composite,were produced by the compocasting method.The effects of temperature,time,and stirring speed of this compocasting method on the microstructure,mechanical and tribological properties of composite were investigated.The results indicated that with increasing the rotational speed from 450 to 550 r/min,the distribution of the SiC particles becomes more uniform.A sudden increase in porosity due to gas absorption results in a downtrend of elongation with an increase in stirring speed from 550 to 650 r/min.Furthermore,as the stirring time increases,the amount of agglomerates of primary Si particles is reduced,and a more uniform microstructure of SiC and Si particles is formed.Although the fracture mode is a combination of both brittle and ductile fractures,the main mechanism of the fracture in the compocast sample is ductile.The formation of a protective layer at a high temperature can result in a very low wear rate as compared to a wear test performed at a low temperature.Optimal particle uniformity and mechanical properties were obtained at processing parameters of 610刟C,550 r/min,and 20 min.展开更多
In the present paper,the hydrodynamic performance of stepped planing craft is investigated by computational fluid dynamics(CFD)analysis.For this purpose,the hydrodynamic resistances of without step,one-step,and two-st...In the present paper,the hydrodynamic performance of stepped planing craft is investigated by computational fluid dynamics(CFD)analysis.For this purpose,the hydrodynamic resistances of without step,one-step,and two-step hulls of Cougar planing craft are evaluated under different distances of the second step and LCG from aft,weight loadings,and Froude numbers(Fr).Our CFD results are appropriately validated against our conducted experimental test in National Iranians Marine Laboratory(NIMALA),Tehran,Iran.Then,the hydrodynamic resistance of intended planing crafts under various geometrical and physical conditions is predicted using artificial neural networks(ANNs).CFD analysis shows two different trends in the growth rate of resistance to weight ratio.So that,using steps for planing craft increases the resistance to weight ratio at lower Fr and decreases it at higher Fr.Additionally,by the increase of the distance between two steps,the resistance to weight ratio is decreased and the porpoising phenomenon is delayed.Furthermore,we obtained the maximum mean square error of ANNs output in the prediction of resistance to weight ratio equal to 0.0027.Finally,the predictive equation is suggested for the resistance to weight ratio of stepped planing craft according to weights and bias of designed ANNs.展开更多
Oil droplets in nanometer scale which are dispersed in water cannot be separated easily. An attractive technique is carried out by electrical phenomena to demulsify oil in water emulsion. In this research, non-uniform...Oil droplets in nanometer scale which are dispersed in water cannot be separated easily. An attractive technique is carried out by electrical phenomena to demulsify oil in water emulsion. In this research, non-uniform electric field or dielectrophoresis （DEP） is applied to remove sunflower oil （which is dispersed in the water）. Effectsof temperature, time and voltage （using AC-electric field） were considered to get the highest DEP-force （Fdi） and the best results. The oil particles sizes with average of approximately 76 nm have been shown using a ZetaSizer Nano ZS, Model ZEN 1600 （Malvem Instrument Ltd.）. The maximum separation efficiency of 85% is obtained at the optimum temperature of 38 ℃ and voltage of 3000 V.展开更多
In this way, after experimental measurement of interfacial tension, different models including mono-exponential decay, dynamic adsorption models and empirical equation are used to correlate this time-dependent behavio...In this way, after experimental measurement of interfacial tension, different models including mono-exponential decay, dynamic adsorption models and empirical equation are used to correlate this time-dependent behavior of interfacial tension(IFT). During the modeling approach, the induction, adsorption, equilibrium, and mesoequilibrium times as well as diffusivity of surface active components known as natural surfactant including asphaltene and resin from crude oil to the interface are obtained. In addition, the surface excess concentration of surface active components at the interface and Gibbs adsorption isotherm are utilized to analyze the measured dynamic IFTs. Finally, the mechanisms of crude oil/aqueous solution IFT including(a) the activity of surfaceactive components and(b) surface excess concentration of them at fluid/fluid interface are proposed and discussed in details.展开更多
The effect of non-isothermal aging treatment on microstructure and mechanical properties of in-situ AA2024−Al_(3)NiCu composite fabricated by the stir casting process was examined.The Al_(3)NiCu intermetallic was crea...The effect of non-isothermal aging treatment on microstructure and mechanical properties of in-situ AA2024−Al_(3)NiCu composite fabricated by the stir casting process was examined.The Al_(3)NiCu intermetallic was created by adding 3 wt.%nickel powder during stir casting and homogenization treatment at 500℃ for 24 h after casting.The microstructural results obtained using optical and scanning electron microscope indicate that,after non-isothermal aging treatment,the S-Al_(2)CuMg precipitates become finer,forming a poor zone of this precipitate in the area between the dendrites.Also,adding nickel during stir casting reduces the precipitation rate and the contribution of S-Al_(2)CuMg precipitates in strengthening composite during non-isothermal aging.The maximum hardness,ultimate tensile strength,and toughness achieved in the 3 wt.%nickel-containing sample after non-isothermal aging at 250℃ are(121.30±4.21)HV,(221.67±8.31)MPa,and(1.67±0.08)MJ/m^(3),respectively.The maximum hardness and ultimate tensile strength of AA2024−Al_(3)NiCu composite are decreased by 6%and 4%,respectively,compared to those of nickel-free AA2024 aluminum alloy.展开更多
Thethermal stability and the kinetics of grain growth of nanocrystalline Mg-6Al-1Zn and Mg-6Al-1Zn-1Si alloys prepared via mechanical alloying were investigated. It started with elemental powders, using a variety of a...Thethermal stability and the kinetics of grain growth of nanocrystalline Mg-6Al-1Zn and Mg-6Al-1Zn-1Si alloys prepared via mechanical alloying were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and energy dispersive spectrometry. The kinetics of grain growth in isothermal annealing was investigated. The XRD results show that, although the grain sizes of both material systems increase as the annealing temperature rises, the Si-containing system displays a relatively smaller grain size, i.e., 60 nm compared with 72 nm in Mg-6Al-1Zn system, after being exposed to 350 ℃ for 1 h. The second-phase intermetallic particle Mg2Si formed during the isothermal annealing of Mg-6Al-1Zn-1Si system could influence not only the activation energy but also the exponent of kinetic equation. Higher hardness values obtained in the Si-containing system would be due to the formation of Mg2Si intermetallic phase.展开更多
Understanding the roles of asphaltene and resin as natural surfactants existed in crude oil can enlighten contradicting reported results regarding interfacial tension(IFT) of crude oil/aqueous solution as a function o...Understanding the roles of asphaltene and resin as natural surfactants existed in crude oil can enlighten contradicting reported results regarding interfacial tension(IFT) of crude oil/aqueous solution as a function of salinity and ion type. In this way, this study is aimed to investigate the effect of these natural surface active agents on IFT of with special focus on SO4^2-anion and Mg^2+cation. Two different synthetic oil solutions of 8 wt% of the extracted asphaltene and resin dissolved in toluene are prepared, and then IFT values are measured. After that,the obtained results are compared with the IFT of intact crude oil in contact with the same saline solutions examined in the previous stage. The obtained results showed a synergistic effect of Na2SO4+ MgCl2 solution unlike the MgSO4+ MgCl2 and CaSO4+ MgCl2 solutions on IFT reduction of resin at MgCl2 concentration of 15000 mg·kg^-1. In summary, it is found that the affinity of asphaltene molecules towards the interface of oleic phase/ionic solution leads to higher IFT variation.展开更多
Phase change materials are one of the potential resources to replace fossil fuels in regards of supplying the energy of buildings.Basically,these materials absorb or release heat energy with the help of their latent h...Phase change materials are one of the potential resources to replace fossil fuels in regards of supplying the energy of buildings.Basically,these materials absorb or release heat energy with the help of their latent heat.Phase change materials have low thermal conductivity and this makes it possible to use the physical properties of these materials in the tropical regions where the solar radiation is more direct and concentrated over a smaller area.In this theoretical work,an attempt has been made to study the melting process of these materials by applying constant heat flux and temperature.It was found that by increasing the thickness of phase change materials’layers,due to the melting,more thermal energy is stored.Simultaneously it reduces the penetration of excessive heat into the chamber,so that by increasing the thickness of paraffin materials up to 20 mm,the rate of temperature reduction reaches more than 18%.It was also recognized that increasing the values of constant input heat flux increases buoyancy effects.Increasing the Stefan number from 0.1 to 0.3,increases the temperature by 6%.展开更多
In this study,the heat transfer optimization(evaporation)and the specification of the FX-70 zeotropic refrigerant flow inside a corrugated pipe have been investigated.Despite the low HTC(HTC),this type of refrigerant ...In this study,the heat transfer optimization(evaporation)and the specification of the FX-70 zeotropic refrigerant flow inside a corrugated pipe have been investigated.Despite the low HTC(HTC),this type of refrigerant is highly applicable in low or medium temperature engineering systems during the evaporation process.To eliminate this defect,high turbulence and proper mixing are required.Therefore,using heat transfer(HT)augmentation methods will be necessary and effective.In order to find the most favorable operating conditions that lead to the optimum combination of pressure drop(PD)and HTC,empirical data,neural networks,and genetic algorithms(GA)for multi-objective(MO)(NSGA II)are used.To investigate the mentioned cases,the geometric parameters of corrugated pipes,vapor quality,and mass velocity of refrigerant were studied.The results showed that with vapor quality higher than 0.8 and corrugation depth and pitch of 1.5 and 7 mm,respectively,we would achieve the desired optimum design.展开更多
文摘This paper investigates the free vibration and transient response of interconnected structures including double curved beams and intermediate straight beams,which are all constructed from functionally graded porous(FGP)materials.The strain potential and kinetic energies of each beam along with the work done by the external force are calculated.Additionally,a higher-order beam element is introduced to derive stiffness and mass matrices,along with the force vector.The curved and straight beams are discretized,and their assembled stiffness,mass matrices,and force vectors,are obtained.Continuity conditions at the joints are used to derive the total matrices of the entire structure.Subsequently,the natural frequencies and transient response of the system are determined.The accuracy of the mathematical model and the self-developed computer program is validated through the comparison of the obtained results with those of the existing literature and commercial software ANSYS,demonstrating excellent agreement.Furthermore,a comprehensive study is conducted to investigate the effects of various parameters on the free vibration and transient response of the considered structure.
基金supported by National Research Foundation of Korea(NRF)grants funded by the Korean Government(MSIT)[grant numbers RS-2023-00207763 and NRF-2022R1A2C2010350].
文摘Magnesium(Mg)and its alloys have recently gained increasing attention in the biomedical field as promising biodegradable materials with harmless degradation products.Magnesium-based alloys have a wide range of biomedical applications because of their outstanding biocompatibility and unique mechanical properties.Widespread use of Mg-based biomedical devices eliminates the need for post-healing biomaterial removal surgery and minimizes the negative consequences of the implantation of permanent biomaterials,including stress shielding and undesired metal ion release in the body.This paper provides a literature review on the properties and manufacturing methods of Mgbased alloys for biomedical applications,including orthopedic implants,cardiovascular applications,surgical wires and staplers,and antitumor activities.Each application of Mg-based biomaterials is investigated from a biological perspective,including matching functional properties,biocompatibility,host tissue responses,and anti-microbial strategies,along with potential additive manufacturing technologies for these applications.Finally,an outlook is presented to provide recommendations for Mg-based biomaterials in the future.
文摘This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic Al-Si alloy deposited on a commercially pure aluminum substrate.The results show that regardless of the consumable rod’s heat treatment conditions,the coating’s efficiency has increased with the increase in heat input,so the coating efficiency increases by 20%and 30%in the solid solution-treated rod and the artificially aged rod,respectively.By increasing the heat input,the average grain size in the coating fabricated by solid solution-treated rod and artificially aged rod increased from 0.1 to 0.9μm and from 0.2 to 1.3μm,respectively.At constant heat input,the average hardness and wear resistance of the coating created in the solid solution-treated rod are lower than those of the artificially aged rod.By decreasing heat input,the wear loss in the coating fabricated by solid solution-treated rod and artificially aged rod decreased by 10%and 20%,respectively,reaching 0.1 and 0.03μg/m.
文摘Coal waste(CW)could be used for soil stabilization due to the pozzolanic elements it contains.There hasn’t been much investigation into how different fibers affect the mechanical qualities of stabilized sand,although adding fibers of any kind to soils may improve the soil because of fiber characteristics like rigidity.For this reason,several tests were carried out on sand that contained 6%cement(by dry weight of used sand),5 wt%CW,0 wt%,0.25 wt%,and 0.50 wt%fiber,as well as the unconfined compressive strength(UCS)test,indirect tensile strength(ITS)test,unconsolidated undrained(UU)triaxial test,scanning electron microscope(SEM)test and ultrasonic pulse velocity(UPV)test.The results showed that in comparison to other fiber reinforced mix designs,the specimen reinforced with 0.5%fibers and the mix design of 0.25 wt%glass and 0.25 wt%polypropylene(PP)fibers exhibited the maximum strength.Examining the impact of fiber type found that glass fibers influence PP strength more favorably than other fiber types.The use of PP fibers is an excellent solution for the problem of large strains in design processes,while adding glass fibers is considered a suitable treatment for issues related to small strains.
文摘Right-turn collisions at intersections are one of the most dominant crash types in suburban areas,especially at unsignalized intersections.There is,however,a lack of comprehensive research on the speed patterns of vehicles during right-turn manoeuvres and their impacts on crashes.To provide an in-depth investigation of the factors determining the safety of right-turn manoeuvres,driving behavior data were collected through an instrumented vehicle study.Using this data,binary logistic regression models were developed to identify the factors affecting the probability of vehicle-vehicle(V-V)and vehicle-pedestrian(V-P)conflicts at six suburban intersections in Babol,Iran,during right-turn stage manoeuvres.In total,1456 V-V and V-P conflicts were identified from the data analysis.The results from the logistic regression model showed that the vehicle speed,the distance between road users,as well as driver and pedestrian distractions were associated with a higher risk for V-V or V-P conflicts.To estimate the safe right-turn speeds to be selected by drivers at different stages of the right turn,i.e.,at the start,during,and end of the movement,linear regression models were developed.The results showed that participants adjust their driving behaviors the same way toward pedestrians as they do toward vehicles.The findings of this study can be leveraged for the development of a robust advanced driving assistance system,the use of which can further improve the safety performance of right-turn manoeuvres.
基金the funding support of Babol Noshirvani University of Technology (No. BNUT/370167/97)
文摘Dissimilar joints comprised of copper–nickel and steel alloys are a challenge for manufacturers in modern industries, as these metals are not thermomechanically or chemically well matched. The present study investigated the effects of tool rotational speed and linear speed on the microstructure and mechanical properties of friction stir-welded C71000 copper–nickel and 340 stainless steel alloys using a tungsten carbide tool with a cylindrical pin. The results indicated that a rotational-to-linear speed ratio of 12.5 r/mm did not cause any macro defects, whereas some tunneling defects and longitudinal cracks were found at other ratios that were lower and higher. Furthermore, chromium carbide was formed on the grain boundaries of the 304 stainless steel near the shoulder zone and inside the joint zone, directing carbon and chromium penetration toward the grain boundaries. Tensile strength and elongation percentages were 84% and 65% of the corresponding values in the copper–nickel base metal, respectively.
文摘The lattice Boltzmann method （LBM） is used to examine free convection of nanofluids. The space between the cold outer square and heated inner circular cylinders is filled with water including various kinds of nanoparticles： TiO2, Ag, Cu, and A1203. The Brinkman and Maxwell-Garnetts models are used to simulate the viscosity and the effective thermal conductivity of nanofluids, respectively. Results from the performed numerical analysis show good agreement with those obtained from other numerical meth- ods. A variety of the Rayleigh number, the nanoparticle volume fraction, and the aspect ratio are examined. According to the results, choosing copper as the nanoparticle leads to obtaining the highest enhancement for this problem. The results also indicate that the maximum value of enhancement occurs at λ =2.5 when Ra = 106 while at A = 1.5 for other Rayleigh numbers.
基金funding support of Babol Noshirvani University of Technology through Grant program No. BNUT/370725/98, BNUT/370388/98, and BNUT/393044/98
文摘The purpose of the present research is to determine the tensile strength and elongation of the A390 alloy processed by ECAP and to reveal the relationship between the microstructure and tensile properties. Optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for microstructural analysis of the samples. The results of the mechanical testing showed that the ultimate tensile strength (UTS) increased from 142 MPa for the as-cast sample to 275 MPa for the sample after the third ECAP pass. Increasing the ECAP passes up to 4 led to a remarkable enhancement of elongation compared with the as-cast sample. It was found that the improvement of strength and ductility of A390 alloy with increasing the number of ECAP passes was attributed to the homogenous distribution of particles, reduction of particle size, and elimination of voids especially adjacent to the primary silicon particles. The results of fractography demonstrated that when the number of ECAP passes increased to 4, the uniform round dimples formed and the relatively brittle as-cast sample transformed to a ductile alloy.
文摘The Mg-6Al-4Zn alloy was fabricated by mechanical alloying(MA)and hot pressing to serve as biodegradable metal implant.The influence of addition of 1%Si(mass fraction)on the microstructure,mechanical properties and bio-corrosion behavior of Mg-6Al-1Zn alloy was studied using X-ray diffractometry,transmission electron microscopy,compression test,as well as immersion,electrochemical test and MTT assay.The results showed that the addition of 1%Si to Mg-6Al-1Zn alloy led to the formation of fine Mg2Si phase with polygonal shape,and increased compressive strength,elongation and improved corrosion resistance.Furthermore,the cell viability of Saos-2 cells has been improved by addition of 1%Si to Mg-6Al-1Zn alloy.According to the results,the magnesium ions released in the methylthiazol tetrazolium(MTT)test have not shown any cell toxicity.All these indicated that the addition of 1%Si improved the properties of Mg-6Al-4Zn alloy for using as a biodegradable implant.
文摘The effect of diamond-like carbon(DLC)coating(fabricated by cathodic arc deposition)on mechanical properties,tribological behavior and corrosion performance of the Ni−Al−bronze(NAB)alloy was investigated.Nano-hardness and pin-on-plate test showed that DLC coating had a greater hardness compared with NAB alloy.Besides,the decrease in friction coefficient from 0.2 for NAB substrate to 0.13 for the DLC-coated sample was observed.Potentiodynamic polarization and EIS results showed that the corrosion current density decreased from 2.5μA/cm2 for bare NAB alloy to 0.14μA/cm2 for DLC-coated sample in 3.5 wt.%NaCl solution.Moreover,the charge transfer resistance at the substrate−electrolyte interface increased from 3.3 kΩ·cm2 for NAB alloy to 120.8 kΩ·cm2 for DLC-coated alloy,which indicated an increase in corrosion resistance due to the DLC coating.
基金funding support of Babol Noshirvani University of Technology,Iran,through Grant Program No.BNUT/370167/99。
文摘The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing process. To carry out this investigation, Ag was added by 5.3, 10.6, and 16.0 wt.% to an AA2024 consumable rod by inserting holes in it. It was found that due to the strengthening by solid solution and the formation of precipitates and intermetallic containing Ag, the driving force for grain growth is reduced and consequently the grain size of the coating is decreased. After artificial aging heat treatment, the electrical conductivities of the coatings containing 0 and 16.0 wt.% Ag are increased by 4.15%(IACS) and decreased by 2.15%(IACS), respectively. While considering a linear relationship, it can be proposed that for a 1 wt.% Ag increase, the strength and hardness of the coating will be increased by 1.8% and 1.0%, respectively. It was established that the effect of Al6(Cu,Ag)Mg4 precipitate formation on strengthening is greater than that of Ag-rich intermetallic.
文摘Aluminum A390 alloys reinforced with 10 wt.%SiC composite,were produced by the compocasting method.The effects of temperature,time,and stirring speed of this compocasting method on the microstructure,mechanical and tribological properties of composite were investigated.The results indicated that with increasing the rotational speed from 450 to 550 r/min,the distribution of the SiC particles becomes more uniform.A sudden increase in porosity due to gas absorption results in a downtrend of elongation with an increase in stirring speed from 550 to 650 r/min.Furthermore,as the stirring time increases,the amount of agglomerates of primary Si particles is reduced,and a more uniform microstructure of SiC and Si particles is formed.Although the fracture mode is a combination of both brittle and ductile fractures,the main mechanism of the fracture in the compocast sample is ductile.The formation of a protective layer at a high temperature can result in a very low wear rate as compared to a wear test performed at a low temperature.Optimal particle uniformity and mechanical properties were obtained at processing parameters of 610刟C,550 r/min,and 20 min.
文摘In the present paper,the hydrodynamic performance of stepped planing craft is investigated by computational fluid dynamics(CFD)analysis.For this purpose,the hydrodynamic resistances of without step,one-step,and two-step hulls of Cougar planing craft are evaluated under different distances of the second step and LCG from aft,weight loadings,and Froude numbers(Fr).Our CFD results are appropriately validated against our conducted experimental test in National Iranians Marine Laboratory(NIMALA),Tehran,Iran.Then,the hydrodynamic resistance of intended planing crafts under various geometrical and physical conditions is predicted using artificial neural networks(ANNs).CFD analysis shows two different trends in the growth rate of resistance to weight ratio.So that,using steps for planing craft increases the resistance to weight ratio at lower Fr and decreases it at higher Fr.Additionally,by the increase of the distance between two steps,the resistance to weight ratio is decreased and the porpoising phenomenon is delayed.Furthermore,we obtained the maximum mean square error of ANNs output in the prediction of resistance to weight ratio equal to 0.0027.Finally,the predictive equation is suggested for the resistance to weight ratio of stepped planing craft according to weights and bias of designed ANNs.
文摘Oil droplets in nanometer scale which are dispersed in water cannot be separated easily. An attractive technique is carried out by electrical phenomena to demulsify oil in water emulsion. In this research, non-uniform electric field or dielectrophoresis （DEP） is applied to remove sunflower oil （which is dispersed in the water）. Effectsof temperature, time and voltage （using AC-electric field） were considered to get the highest DEP-force （Fdi） and the best results. The oil particles sizes with average of approximately 76 nm have been shown using a ZetaSizer Nano ZS, Model ZEN 1600 （Malvem Instrument Ltd.）. The maximum separation efficiency of 85% is obtained at the optimum temperature of 38 ℃ and voltage of 3000 V.
文摘In this way, after experimental measurement of interfacial tension, different models including mono-exponential decay, dynamic adsorption models and empirical equation are used to correlate this time-dependent behavior of interfacial tension(IFT). During the modeling approach, the induction, adsorption, equilibrium, and mesoequilibrium times as well as diffusivity of surface active components known as natural surfactant including asphaltene and resin from crude oil to the interface are obtained. In addition, the surface excess concentration of surface active components at the interface and Gibbs adsorption isotherm are utilized to analyze the measured dynamic IFTs. Finally, the mechanisms of crude oil/aqueous solution IFT including(a) the activity of surfaceactive components and(b) surface excess concentration of them at fluid/fluid interface are proposed and discussed in details.
文摘The effect of non-isothermal aging treatment on microstructure and mechanical properties of in-situ AA2024−Al_(3)NiCu composite fabricated by the stir casting process was examined.The Al_(3)NiCu intermetallic was created by adding 3 wt.%nickel powder during stir casting and homogenization treatment at 500℃ for 24 h after casting.The microstructural results obtained using optical and scanning electron microscope indicate that,after non-isothermal aging treatment,the S-Al_(2)CuMg precipitates become finer,forming a poor zone of this precipitate in the area between the dendrites.Also,adding nickel during stir casting reduces the precipitation rate and the contribution of S-Al_(2)CuMg precipitates in strengthening composite during non-isothermal aging.The maximum hardness,ultimate tensile strength,and toughness achieved in the 3 wt.%nickel-containing sample after non-isothermal aging at 250℃ are(121.30±4.21)HV,(221.67±8.31)MPa,and(1.67±0.08)MJ/m^(3),respectively.The maximum hardness and ultimate tensile strength of AA2024−Al_(3)NiCu composite are decreased by 6%and 4%,respectively,compared to those of nickel-free AA2024 aluminum alloy.
文摘Thethermal stability and the kinetics of grain growth of nanocrystalline Mg-6Al-1Zn and Mg-6Al-1Zn-1Si alloys prepared via mechanical alloying were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and energy dispersive spectrometry. The kinetics of grain growth in isothermal annealing was investigated. The XRD results show that, although the grain sizes of both material systems increase as the annealing temperature rises, the Si-containing system displays a relatively smaller grain size, i.e., 60 nm compared with 72 nm in Mg-6Al-1Zn system, after being exposed to 350 ℃ for 1 h. The second-phase intermetallic particle Mg2Si formed during the isothermal annealing of Mg-6Al-1Zn-1Si system could influence not only the activation energy but also the exponent of kinetic equation. Higher hardness values obtained in the Si-containing system would be due to the formation of Mg2Si intermetallic phase.
文摘Understanding the roles of asphaltene and resin as natural surfactants existed in crude oil can enlighten contradicting reported results regarding interfacial tension(IFT) of crude oil/aqueous solution as a function of salinity and ion type. In this way, this study is aimed to investigate the effect of these natural surface active agents on IFT of with special focus on SO4^2-anion and Mg^2+cation. Two different synthetic oil solutions of 8 wt% of the extracted asphaltene and resin dissolved in toluene are prepared, and then IFT values are measured. After that,the obtained results are compared with the IFT of intact crude oil in contact with the same saline solutions examined in the previous stage. The obtained results showed a synergistic effect of Na2SO4+ MgCl2 solution unlike the MgSO4+ MgCl2 and CaSO4+ MgCl2 solutions on IFT reduction of resin at MgCl2 concentration of 15000 mg·kg^-1. In summary, it is found that the affinity of asphaltene molecules towards the interface of oleic phase/ionic solution leads to higher IFT variation.
文摘Phase change materials are one of the potential resources to replace fossil fuels in regards of supplying the energy of buildings.Basically,these materials absorb or release heat energy with the help of their latent heat.Phase change materials have low thermal conductivity and this makes it possible to use the physical properties of these materials in the tropical regions where the solar radiation is more direct and concentrated over a smaller area.In this theoretical work,an attempt has been made to study the melting process of these materials by applying constant heat flux and temperature.It was found that by increasing the thickness of phase change materials’layers,due to the melting,more thermal energy is stored.Simultaneously it reduces the penetration of excessive heat into the chamber,so that by increasing the thickness of paraffin materials up to 20 mm,the rate of temperature reduction reaches more than 18%.It was also recognized that increasing the values of constant input heat flux increases buoyancy effects.Increasing the Stefan number from 0.1 to 0.3,increases the temperature by 6%.
文摘In this study,the heat transfer optimization(evaporation)and the specification of the FX-70 zeotropic refrigerant flow inside a corrugated pipe have been investigated.Despite the low HTC(HTC),this type of refrigerant is highly applicable in low or medium temperature engineering systems during the evaporation process.To eliminate this defect,high turbulence and proper mixing are required.Therefore,using heat transfer(HT)augmentation methods will be necessary and effective.In order to find the most favorable operating conditions that lead to the optimum combination of pressure drop(PD)and HTC,empirical data,neural networks,and genetic algorithms(GA)for multi-objective(MO)(NSGA II)are used.To investigate the mentioned cases,the geometric parameters of corrugated pipes,vapor quality,and mass velocity of refrigerant were studied.The results showed that with vapor quality higher than 0.8 and corrugation depth and pitch of 1.5 and 7 mm,respectively,we would achieve the desired optimum design.
