Domaining is a crucial process in geostatistics, particularly when significant spatial variations are observed within a site, as these variations can significantly affect the outcomes of spatial modeling. This study i...Domaining is a crucial process in geostatistics, particularly when significant spatial variations are observed within a site, as these variations can significantly affect the outcomes of spatial modeling. This study investigates the application of hard and fuzzy clustering algorithms for domain delineation, using geological and geochemical data from two exploration campaigns at the eastern Kahang deposit in central Iran. The dataset includes geological layers (lithology, alteration, and mineral zones), geochemical layers (Cu, Mo, Ag, and Au grades), and borehole coordinates. Six clustering algorithms—K-means, hierarchical, affinity propagation, self-organizing map (SOM), fuzzy C-means, and Gustafson-Kessel—were applied to determine the optimal number of clusters, which ranged from 3 to 4. The fuzziness and weighting parameters were found to range from 1.1 to 1.3 and 0.1 to 0.3, respectively, based on the evaluation of various hard and fuzzy cluster validity indices. Directional variograms were computed to assess spatial anisotropy, and the anisotropy ellipsoid for each domain was defined to identify the model with the highest level of anisotropic discrimination among the domains. The SOM algorithm, which incorporated both qualitative and quantitative data, produced the best model, resulting in the identification of three distinct domains. These findings underscore the effectiveness of combining clustering techniques with variogram analysis for accurate domain delineation in geostatistical modeling.展开更多
We studied the decomposition of two haloacetic acids (HAAs),dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA),in water by single oxidants ozone (O3) and ultraviolet radiation (UV) and the advanced oxidation p...We studied the decomposition of two haloacetic acids (HAAs),dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA),in water by single oxidants ozone (O3) and ultraviolet radiation (UV) and the advanced oxidation processes (AOPs) constituted by the combinations of O3/UV,H2O2/UV,O3 /H2O2,and O3/H2O2/UV. The concentrations of HAAs were analyzed at specified time intervals to track their decomposition. Except for O3 and UV,the four combined oxidation processes remarkably enhance the decomposition of DCAA and TCAA owing to the generated very reactive hydroxyl radicals. The fastest decomposition process is O3/H2O2/UV,closely followed by O3/UV. DCAA is much easier to decompose than TCAA. The kinetics of HAA decomposition by O3/UV can be described well by a pseudo first-order reaction model under a constant initial dissolved O3 concentration and fixed UV radiation. Humic acids and HCO3-in the reaction system both decrease the decomposition rate constants for DCAA and TCAA. The amount of H2O2 accumulates in the presence of humic acids in the O3/UV process.展开更多
Topology optimization of thermal-fluid coupling problems has received widespread attention.This article proposes a novel topology optimization method for laminar two-fluid heat exchanger design.The proposed method uti...Topology optimization of thermal-fluid coupling problems has received widespread attention.This article proposes a novel topology optimization method for laminar two-fluid heat exchanger design.The proposed method utilizes an artificial density field to create two permeability interpolation functions that exhibit opposing trends,ensuring separation between the two fluid domains.Additionally,a Gaussian function is employed to construct an interpolation function for the thermal conductivity coefficient.Furthermore,a computational program has been developed on the OpenFOAM platform for the topology optimization of two-fluid heat exchangers.This program leverages parallel computing,significantly reducing the time required for the topology optimization process.To enhance computational speed and reduce the number of constraint conditions,we replaced the conventional pressure drop constraint condition in the optimization problem with a pressure inlet/outlet boundary condition.The 3D optimization results demonstrate the characteristic features of a surface structure,providing valuable guidance for designing heat exchangers that achieve high heat exchange efficiency while minimizing excessive pressure loss.At the same time,a new structure appears in large-scale topology optimization,which proves the effectiveness and stability of the topology optimization program written in this paper in large-scale calculation.展开更多
Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its applications.One approach to overcome this limitation is the addition of secondary phases into boron carbide...Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its applications.One approach to overcome this limitation is the addition of secondary phases into boron carbide.Boron carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering additive.The present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and SiC.The results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher hardness.However,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.展开更多
Recent technological advances in miniaturization have allowed for a confocal scanning microscope to be integrated into a conventional flexible endoscope,or into trans-endoscopic probes,a technique now known as confoca...Recent technological advances in miniaturization have allowed for a confocal scanning microscope to be integrated into a conventional flexible endoscope,or into trans-endoscopic probes,a technique now known as confocal endomicroscopy or confocal laser endomicroscopy.This newly-developed technology has enabled endoscopists to collect real-time in vivo histological images or "virtual biopsies" of the gastrointestinal mucosa during endoscopy,and has stimulated significant interest in the application of this technique in clinical gastroenterology.This review aims to evaluate the current data on the technical aspects and the utility of this new technology in clinical gastroenterology and its potential impact in the future,particularly in the screening or surveillance of gastrointestinal neoplasia.展开更多
Cu/Al bar clad material was fabricated by a drawing process and a subsequent heat treatment.During these processes,intermetallic compounds have been formed at the interface of Cu/Al and have affected its bonding prope...Cu/Al bar clad material was fabricated by a drawing process and a subsequent heat treatment.During these processes,intermetallic compounds have been formed at the interface of Cu/Al and have affected its bonding property.Microstructures of Cu/Al interfaces were observed by OM,SEM and EDX Analyser in order to investigate the bonding properties of the material.According to the microstructure a series of diffusion layers were observed at the interface and the thicknesses of diffusion layers have increased with aging time as a result of the diffusion bonding.The interfaces were composed of 3-ply diffusion layers and their compositions were changed with aging time at 400 °C.These compositional compounds were revealed to be η2,(θ+η2),(α+θ) intermetallic phases.It is evident from V-notch impact tests that the growth of the brittle diffusion layers with the increasing aging time directly influenced delamination distance between the Cu sleeve and the Al core.It is suggested that the proper holding time at 400 °C for aging as post heat treatment of a drawn Cu/Al bar clad material would be within 1 h.展开更多
To study the uncertain optimization problems on implementation schedule, time-cost trade-off and quality in enterprise resource planning （ERP） implementation, combined with program evaluation and review technique （...To study the uncertain optimization problems on implementation schedule, time-cost trade-off and quality in enterprise resource planning （ERP） implementation, combined with program evaluation and review technique （PERT）, some optimization models are proposed, which include the implementation schedule model, the timecost trade-off model, the quality model, and the implementation time-cost-quality synthetic optimization model. A PERT-embedded genetic algorithm （GA） based on stochastic simulation technique is introduced to the optimization models solution. Finally, an example is presented to show that the models and algorithm are reasonable and effective, which can offer a reliable quantitative decision method for ERP implementation.展开更多
The rapidness and stability of background extraction from image sequences are incompatible,that is,when a conventional Gaussian mixture models (GMM)is used to rebuild the background,if the background regions of the sc...The rapidness and stability of background extraction from image sequences are incompatible,that is,when a conventional Gaussian mixture models (GMM)is used to rebuild the background,if the background regions of the scene are changed,the extracted background becomes bad until the transition is over. A novel adaptive method is presented to adjust the learning rate of GMM in a Hilbert space. The background extraction is treated as a process of approaching to a certain point in the Hilbert space,so the real-time learning rate can be obtained by calculating the distance between the two adjacent extracted background images,and a judgment method of the stability of background is got too. Compared with conventional GMM,the method has both high rapidness and good stability at the same time,and it can adjust the learning rate online. The experiment shows that it is better than conventional GMM,especially in the transition process of background extraction.展开更多
Hilar tumors have proven to be a challenge to treat and manage because of their poor sensitivity to conventional therapies and our inability to prevent or to detect early tumor formation. Endoscopic stent drainage has...Hilar tumors have proven to be a challenge to treat and manage because of their poor sensitivity to conventional therapies and our inability to prevent or to detect early tumor formation. Endoscopic stent drainage has been proposed as an alternative to biliary-enteric bypass surgery and percutaneous drainage to palliate malignant biliary obstruction. Prosthetic palliation of patients with malignant hilar stenoses poses particular difficulties, especially in advanced lesions （type Ⅱ lesions or higher）. The risk of cholangitis after contrast injection into the biliary tree in cases where incomplete drainage is achieved is well known. The success rate of plastic stent insertion is around 80% in patients with proximal tumors. Relief of symptoms can be achieved in nearly all patients successfully stented.展开更多
As underground excavations are getting deeper and field stresses increase, the behavior of intact rock blocks plays an increasingly important role in understanding and estimating the overall rock mass strength. To mod...As underground excavations are getting deeper and field stresses increase, the behavior of intact rock blocks plays an increasingly important role in understanding and estimating the overall rock mass strength. To model the brittle behavior of intact rock blocks, the stress–strain curve is usually idealized considering a linear strength mobilization approach(cohesion-weakening-friction-strengthening, CWFS),however, it is well recognized that rock presents a nonlinear behavior in terms of the confining stress.This study extends the strength mobilization in brittle failure of rock using nonlinear criteria. To determine the model parameters, a standard statistical method that uses the complete laboratory stress–strain curves of the intact rock is employed. Several hypotheses of linear and nonlinear models are statistically compared for different types of rock and confining stress levels. Results demonstrate that the best approach to model the brittle failure of rock is to consider a nonlinear strength envelope, such as the Hoek-Brown criterion assuming a residual uniaxial compressive strength different from zero and a mi parameter that increases, both with simultaneous mobilization. This model helps to recreate highconfining conditions and a more realistic transition between peak and post-peak strength. The obtained parameters are discussed and compared with literature values to verify the validity and to develop guidelines for the estimation of parameters, providing an objective mobilization criterion. Finally, the nonlinear model was applied to a finite element code and extended to a tunnel scale in the brittle rock under high-stress conditions. A reasonable fit between the simulations and the in-situ overbreak measurements was found.展开更多
In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)...In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.展开更多
Barrett's esophagus is a condition resulting from chronic gastro-esophageal reflux disease with a documented risk of esophageal adenocarcinoma. Current strategies for improved survival in patients with Barrett'...Barrett's esophagus is a condition resulting from chronic gastro-esophageal reflux disease with a documented risk of esophageal adenocarcinoma. Current strategies for improved survival in patients with Barrett's adenocarcinoma focus on detection of dysplasia. This can be obtained by screening programs in high-risk cohorts of patients and/or endoscopic biopsy surveillance of patients with known Barrett's esophagus (BE). Several therapies have been developed in attempts to reverse BE and reduce cancer risk. Aggressive medical management of acid reflux, lifestyle modifications, antireflux surgery, and endoscopic treatments have been recommended for many patients with BE. Whether these interventions are cost-effective or reduce mortality from esophageal cancer remains controversial. Current treatment requires combinations of endoscopic mucosal resection techniques to eliminate visible lesions followed by ablation of residual metaplastic tissue. Esophagectomy is currently indicated in multifocal high-grade neoplasia or mucosal Barrett's carcinoma which cannot be managed by endoscopic approach.展开更多
Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement o...Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement of X-ray diffraction (XRD) results show that the proportion of Li occupying 16d sites is extraordinary low and the lattice constants of LTO and R-TiO2 change with the ritanium dioxide content. EIS measurements showed that with in creasing R-TiO2 content, both its charge transfer impedance (Rct) and lithium ion diffusion coefficient (DLi) decreased. The changes of Rct and DLi caused by the increase of titanium dioxide content have synergic-antagonistic effects on the rate and cycle properties of Li4Ti5012. The rate performance is positively related to DLi, while the cycle property is negatively correlated with Rct, indicati ng that the rate performs nee is mainly related to DLi, while Rct more significantly affects the cycle performance. LTO-RT-17.06% exhibited excellent rate properties, especially under a high current density (5.0 C, 132.5 mAh/g) and LTO-RT-34.42% showed superior long-term cycle performance (0.012% capacity loss per cycle) compared to that of LTO-RT-17.06% and LTO-RT-23.69%.展开更多
Recently,the use of confocal laser endomicroscopy(CLE) in the diagnosis of chronic ulcerative colitis(CUC) was reported.In this brief report we aimed to assess the application of probe-based CLE to characterize coloni...Recently,the use of confocal laser endomicroscopy(CLE) in the diagnosis of chronic ulcerative colitis(CUC) was reported.In this brief report we aimed to assess the application of probe-based CLE to characterize colonic mucosa and dysplasia in CUC.The study involved a patient presenting long-standing CUC.Confocal imaging of both the inflamed mucosa,a circumscribed lesion(dysplasiaassociated lesional mass),and adjacent colonic mucosa are demonstrated and the correlation between the CLE and histological images.Inflamed mucosa and dysplasia showed specific alteration of crypt architecture,cellular infiltration,and vessel architecture with an excellent correlation between CLE and standard histological examination.展开更多
Mold manufacturing Extended Enterprise （EE） has the following characteristics： distributed in locality, tight cooperation and frequent information exchange. It needs a collaborative, highly efficient, reliable and ...Mold manufacturing Extended Enterprise （EE） has the following characteristics： distributed in locality, tight cooperation and frequent information exchange. It needs a collaborative, highly efficient, reliable and intelligent manufacturing management system. The background of the Collaborative Manufacturing is introduced. A mold Collaborative Manufacturing Execution System （c-MES） is proposed. The feature of Web Service platform is analyzed. The necessity and feasibility of importing the Web Service to mold c-MES are discussed. Based on Web Service, the model of mold c-MES is built. Every module＇ s function is described in detail, including the functions it supplies and the mechanism of information interaction among them. The feasibility of mold c-MES model is validated by a real mold manufacturing case.展开更多
To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better si...To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better simulate the logistics fact, which is aimed at periodic inventory checking and pull mode of inventory control strategy, based on the return product arrival time obeying Poisson distribution, the return product employing lotsize process and the nonzero lead time of manufaeturinge/remanufacturing. The rational cost function with multiple constraints is employed to describe the inventory model. The genetic algorithm is employed to solve the inventory cost function to obtain the optimal solution of inventory checking periods, safe inventory point, product lot-sizes and process lot-sizes of return product. An example is presented to prove the feasibility and validity of the proposed method. Moreover, the influence of manufacturing/remanufacturing lead time and reuse rate of return production on the inventory control strategy of enterprise is analyzed.展开更多
The occurrence of leiomyoma of the rectum is uncommon. Most of these lesions are clinically silent and are found incidentally during laparotomy or endoscopic procedures for unrelated conditions. Symptomatic leiomyomas...The occurrence of leiomyoma of the rectum is uncommon. Most of these lesions are clinically silent and are found incidentally during laparotomy or endoscopic procedures for unrelated conditions. Symptomatic leiomyomas of the rectum are encountered less frequently, with only sporadic reports in the literature. We describe a case of a leiomyoma of the rectum presenting as recurrent lower gastrointestinal hemorrhage and secondary anemia.展开更多
The flow stress behavior of an as-spray-deposited AZ31 magnesium alloy with fine grains was investigated by means of compression tests with a Gleeble 1500 thermal mechanical simulator at isothermal constant strain rat...The flow stress behavior of an as-spray-deposited AZ31 magnesium alloy with fine grains was investigated by means of compression tests with a Gleeble 1500 thermal mechanical simulator at isothermal constant strain rates of 0.01, 0.1, 1.0, and 10 s^-1; the testing temperatures ranged from 623 to 723 K. It is demonstrated that a linear equation can be fitted between the Zemer-Hollomon parameter Z and stress in a double-log scale. The effect of deformation parameters on the behavior of recrystallization was analyzed. Dynamic recrystallization （DRX） generally occurs at a higher temperature and at a lower strain rate. The constitutive equation of the spray-deposited AZ31 magnesium alloy is presented by calculating the deformation activation energy （199.8 kJ·mol^-1）. The as-spray-formed AZ31 alloy is easier for DRX nucleation at elevated temperatures due to the fine grain, which provides a large amount of nucleation sites and a high-diffusivity path for the atom.展开更多
Virtual hand is an important medium for implementation of human-computer interaction in the process of virtual assembly. And the comparability between the action of virtual hand and real man-hand has always been regar...Virtual hand is an important medium for implementation of human-computer interaction in the process of virtual assembly. And the comparability between the action of virtual hand and real man-hand has always been regarded as one of the important criteria to judge whether the virtual environment has the property of immersion. On the basis of analyzing the relative position,posture,and motion behavior relationship between virtual hand and the object to be operated during virtual assembly,this paper proposed an implementation method of combining grasp index with collision detecting technology for identifying grasp action of virtual hand. The method is to identify grasp/quit using grasp index and to implement joint angle adjustment through simulation cyclic iteration and joint angle interpolation calculation. Although some traditional method identifying the grasp action on the basis of the shape of the object is operated,the simulation result getting from virtual environment created by EON STUDIO shows that it has good features of serviceability and fidelity to realize operation control of virtual hand.展开更多
The field of geriatric cardiology reflects the evolving medical approaches tailored to address the needs of the growing population of oldest old with cardiovascular diseases （CVD）. The burden of CVD is expected to i...The field of geriatric cardiology reflects the evolving medical approaches tailored to address the needs of the growing population of oldest old with cardiovascular diseases （CVD）. The burden of CVD is expected to increase particularly for the most common types of chronic heart disease of the elderly including coronary artery disease, heart failure and atrial fibrillation. In this context of dramatic demographic changes, geriatric cardiologists are facing important challenges. In this review, we outline the basic concepts of geriatric cardiology and describe these challenges as well as the unmet needs around this discipline with also a focus on the translation from basic research.展开更多
文摘Domaining is a crucial process in geostatistics, particularly when significant spatial variations are observed within a site, as these variations can significantly affect the outcomes of spatial modeling. This study investigates the application of hard and fuzzy clustering algorithms for domain delineation, using geological and geochemical data from two exploration campaigns at the eastern Kahang deposit in central Iran. The dataset includes geological layers (lithology, alteration, and mineral zones), geochemical layers (Cu, Mo, Ag, and Au grades), and borehole coordinates. Six clustering algorithms—K-means, hierarchical, affinity propagation, self-organizing map (SOM), fuzzy C-means, and Gustafson-Kessel—were applied to determine the optimal number of clusters, which ranged from 3 to 4. The fuzziness and weighting parameters were found to range from 1.1 to 1.3 and 0.1 to 0.3, respectively, based on the evaluation of various hard and fuzzy cluster validity indices. Directional variograms were computed to assess spatial anisotropy, and the anisotropy ellipsoid for each domain was defined to identify the model with the highest level of anisotropic discrimination among the domains. The SOM algorithm, which incorporated both qualitative and quantitative data, produced the best model, resulting in the identification of three distinct domains. These findings underscore the effectiveness of combining clustering techniques with variogram analysis for accurate domain delineation in geostatistical modeling.
基金Natural Science Foundation of Chongqing under Grant No. CSTC2008BB7299.
文摘We studied the decomposition of two haloacetic acids (HAAs),dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA),in water by single oxidants ozone (O3) and ultraviolet radiation (UV) and the advanced oxidation processes (AOPs) constituted by the combinations of O3/UV,H2O2/UV,O3 /H2O2,and O3/H2O2/UV. The concentrations of HAAs were analyzed at specified time intervals to track their decomposition. Except for O3 and UV,the four combined oxidation processes remarkably enhance the decomposition of DCAA and TCAA owing to the generated very reactive hydroxyl radicals. The fastest decomposition process is O3/H2O2/UV,closely followed by O3/UV. DCAA is much easier to decompose than TCAA. The kinetics of HAA decomposition by O3/UV can be described well by a pseudo first-order reaction model under a constant initial dissolved O3 concentration and fixed UV radiation. Humic acids and HCO3-in the reaction system both decrease the decomposition rate constants for DCAA and TCAA. The amount of H2O2 accumulates in the presence of humic acids in the O3/UV process.
基金supported by the Aeronautical Science Foundation of China(Grant No.2020Z009063001)the Fundamental Research Funds for the Central Universities(Grant No.DUT22GF303).
文摘Topology optimization of thermal-fluid coupling problems has received widespread attention.This article proposes a novel topology optimization method for laminar two-fluid heat exchanger design.The proposed method utilizes an artificial density field to create two permeability interpolation functions that exhibit opposing trends,ensuring separation between the two fluid domains.Additionally,a Gaussian function is employed to construct an interpolation function for the thermal conductivity coefficient.Furthermore,a computational program has been developed on the OpenFOAM platform for the topology optimization of two-fluid heat exchangers.This program leverages parallel computing,significantly reducing the time required for the topology optimization process.To enhance computational speed and reduce the number of constraint conditions,we replaced the conventional pressure drop constraint condition in the optimization problem with a pressure inlet/outlet boundary condition.The 3D optimization results demonstrate the characteristic features of a surface structure,providing valuable guidance for designing heat exchangers that achieve high heat exchange efficiency while minimizing excessive pressure loss.At the same time,a new structure appears in large-scale topology optimization,which proves the effectiveness and stability of the topology optimization program written in this paper in large-scale calculation.
基金YOK(MEVLANA 2018-9999-Proj-ect-Based International Exchange Programme)for financial support in inter-national collaboration.
文摘Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its applications.One approach to overcome this limitation is the addition of secondary phases into boron carbide.Boron carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering additive.The present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and SiC.The results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher hardness.However,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.
文摘Recent technological advances in miniaturization have allowed for a confocal scanning microscope to be integrated into a conventional flexible endoscope,or into trans-endoscopic probes,a technique now known as confocal endomicroscopy or confocal laser endomicroscopy.This newly-developed technology has enabled endoscopists to collect real-time in vivo histological images or "virtual biopsies" of the gastrointestinal mucosa during endoscopy,and has stimulated significant interest in the application of this technique in clinical gastroenterology.This review aims to evaluate the current data on the technical aspects and the utility of this new technology in clinical gastroenterology and its potential impact in the future,particularly in the screening or surveillance of gastrointestinal neoplasia.
基金Project supported by the Fundamental Materials Development funded by the Korean Ministry of Knowledge Economy
文摘Cu/Al bar clad material was fabricated by a drawing process and a subsequent heat treatment.During these processes,intermetallic compounds have been formed at the interface of Cu/Al and have affected its bonding property.Microstructures of Cu/Al interfaces were observed by OM,SEM and EDX Analyser in order to investigate the bonding properties of the material.According to the microstructure a series of diffusion layers were observed at the interface and the thicknesses of diffusion layers have increased with aging time as a result of the diffusion bonding.The interfaces were composed of 3-ply diffusion layers and their compositions were changed with aging time at 400 °C.These compositional compounds were revealed to be η2,(θ+η2),(α+θ) intermetallic phases.It is evident from V-notch impact tests that the growth of the brittle diffusion layers with the increasing aging time directly influenced delamination distance between the Cu sleeve and the Al core.It is suggested that the proper holding time at 400 °C for aging as post heat treatment of a drawn Cu/Al bar clad material would be within 1 h.
基金the National High-Tech. R & D Program for CIMS, China (2003AA413210).
文摘To study the uncertain optimization problems on implementation schedule, time-cost trade-off and quality in enterprise resource planning （ERP） implementation, combined with program evaluation and review technique （PERT）, some optimization models are proposed, which include the implementation schedule model, the timecost trade-off model, the quality model, and the implementation time-cost-quality synthetic optimization model. A PERT-embedded genetic algorithm （GA） based on stochastic simulation technique is introduced to the optimization models solution. Finally, an example is presented to show that the models and algorithm are reasonable and effective, which can offer a reliable quantitative decision method for ERP implementation.
文摘The rapidness and stability of background extraction from image sequences are incompatible,that is,when a conventional Gaussian mixture models (GMM)is used to rebuild the background,if the background regions of the scene are changed,the extracted background becomes bad until the transition is over. A novel adaptive method is presented to adjust the learning rate of GMM in a Hilbert space. The background extraction is treated as a process of approaching to a certain point in the Hilbert space,so the real-time learning rate can be obtained by calculating the distance between the two adjacent extracted background images,and a judgment method of the stability of background is got too. Compared with conventional GMM,the method has both high rapidness and good stability at the same time,and it can adjust the learning rate online. The experiment shows that it is better than conventional GMM,especially in the transition process of background extraction.
文摘Hilar tumors have proven to be a challenge to treat and manage because of their poor sensitivity to conventional therapies and our inability to prevent or to detect early tumor formation. Endoscopic stent drainage has been proposed as an alternative to biliary-enteric bypass surgery and percutaneous drainage to palliate malignant biliary obstruction. Prosthetic palliation of patients with malignant hilar stenoses poses particular difficulties, especially in advanced lesions （type Ⅱ lesions or higher）. The risk of cholangitis after contrast injection into the biliary tree in cases where incomplete drainage is achieved is well known. The success rate of plastic stent insertion is around 80% in patients with proximal tumors. Relief of symptoms can be achieved in nearly all patients successfully stented.
基金the financial support from basal CONICYT project AFB-180004 of the Advanced Mining Technology Center (AMTC) - University of Chile。
文摘As underground excavations are getting deeper and field stresses increase, the behavior of intact rock blocks plays an increasingly important role in understanding and estimating the overall rock mass strength. To model the brittle behavior of intact rock blocks, the stress–strain curve is usually idealized considering a linear strength mobilization approach(cohesion-weakening-friction-strengthening, CWFS),however, it is well recognized that rock presents a nonlinear behavior in terms of the confining stress.This study extends the strength mobilization in brittle failure of rock using nonlinear criteria. To determine the model parameters, a standard statistical method that uses the complete laboratory stress–strain curves of the intact rock is employed. Several hypotheses of linear and nonlinear models are statistically compared for different types of rock and confining stress levels. Results demonstrate that the best approach to model the brittle failure of rock is to consider a nonlinear strength envelope, such as the Hoek-Brown criterion assuming a residual uniaxial compressive strength different from zero and a mi parameter that increases, both with simultaneous mobilization. This model helps to recreate highconfining conditions and a more realistic transition between peak and post-peak strength. The obtained parameters are discussed and compared with literature values to verify the validity and to develop guidelines for the estimation of parameters, providing an objective mobilization criterion. Finally, the nonlinear model was applied to a finite element code and extended to a tunnel scale in the brittle rock under high-stress conditions. A reasonable fit between the simulations and the in-situ overbreak measurements was found.
文摘In this paper,a white organic light-emitting device(WOLEDs) with multiple-emissive-layer structure has been fabricated.The device has a simple structure of indium tin oxide(ITO)/NPB(20 nm)//DPVBi(20 nm)/CDBP:x Ir(btp)2acac(10 nm)/Alq3(25 nm)/BCP(5 nm)/Cs F(1 nm)/Al(150 nm)(x= 0.15,2.5 and 3.0 wt%),where NPB and BCP are used as the hole-injecting layer,electron transporting and hole blocking layer,respectively.White light emission was realized in an OLED with 2.5% Ir(btp)2acac doping concentration.The device exhibits peak efficiency of 1.93 cd/A at 9 V and maximum brightness of 7005 cd/m^2 at 14 V.The Commission International de I'Eclairage(CIE)(1931) coordinates of white emission are well within the white zone,which moves from(0.35,0.33) to(0.26,0.30) when the applied voltage is varied from 5 V to 14 V.
文摘Barrett's esophagus is a condition resulting from chronic gastro-esophageal reflux disease with a documented risk of esophageal adenocarcinoma. Current strategies for improved survival in patients with Barrett's adenocarcinoma focus on detection of dysplasia. This can be obtained by screening programs in high-risk cohorts of patients and/or endoscopic biopsy surveillance of patients with known Barrett's esophagus (BE). Several therapies have been developed in attempts to reverse BE and reduce cancer risk. Aggressive medical management of acid reflux, lifestyle modifications, antireflux surgery, and endoscopic treatments have been recommended for many patients with BE. Whether these interventions are cost-effective or reduce mortality from esophageal cancer remains controversial. Current treatment requires combinations of endoscopic mucosal resection techniques to eliminate visible lesions followed by ablation of residual metaplastic tissue. Esophagectomy is currently indicated in multifocal high-grade neoplasia or mucosal Barrett's carcinoma which cannot be managed by endoscopic approach.
基金financially supported by the National Natural Science Foundation of China(No.51641206)Shandong Natural Science Foundation Project(No.ZR2015EM013)+1 种基金Special Funds for Independent Innovation and Transformation of Achievements in Shandong Province(No.2014CGZH0911)National Key R&D Program of China(No.2016YFB0100508)
文摘Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement of X-ray diffraction (XRD) results show that the proportion of Li occupying 16d sites is extraordinary low and the lattice constants of LTO and R-TiO2 change with the ritanium dioxide content. EIS measurements showed that with in creasing R-TiO2 content, both its charge transfer impedance (Rct) and lithium ion diffusion coefficient (DLi) decreased. The changes of Rct and DLi caused by the increase of titanium dioxide content have synergic-antagonistic effects on the rate and cycle properties of Li4Ti5012. The rate performance is positively related to DLi, while the cycle property is negatively correlated with Rct, indicati ng that the rate performs nee is mainly related to DLi, while Rct more significantly affects the cycle performance. LTO-RT-17.06% exhibited excellent rate properties, especially under a high current density (5.0 C, 132.5 mAh/g) and LTO-RT-34.42% showed superior long-term cycle performance (0.012% capacity loss per cycle) compared to that of LTO-RT-17.06% and LTO-RT-23.69%.
文摘Recently,the use of confocal laser endomicroscopy(CLE) in the diagnosis of chronic ulcerative colitis(CUC) was reported.In this brief report we aimed to assess the application of probe-based CLE to characterize colonic mucosa and dysplasia in CUC.The study involved a patient presenting long-standing CUC.Confocal imaging of both the inflamed mucosa,a circumscribed lesion(dysplasiaassociated lesional mass),and adjacent colonic mucosa are demonstrated and the correlation between the CLE and histological images.Inflamed mucosa and dysplasia showed specific alteration of crypt architecture,cellular infiltration,and vessel architecture with an excellent correlation between CLE and standard histological examination.
文摘Mold manufacturing Extended Enterprise （EE） has the following characteristics： distributed in locality, tight cooperation and frequent information exchange. It needs a collaborative, highly efficient, reliable and intelligent manufacturing management system. The background of the Collaborative Manufacturing is introduced. A mold Collaborative Manufacturing Execution System （c-MES） is proposed. The feature of Web Service platform is analyzed. The necessity and feasibility of importing the Web Service to mold c-MES are discussed. Based on Web Service, the model of mold c-MES is built. Every module＇ s function is described in detail, including the functions it supplies and the mechanism of information interaction among them. The feasibility of mold c-MES model is validated by a real mold manufacturing case.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.2003AA413210)
文摘To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better simulate the logistics fact, which is aimed at periodic inventory checking and pull mode of inventory control strategy, based on the return product arrival time obeying Poisson distribution, the return product employing lotsize process and the nonzero lead time of manufaeturinge/remanufacturing. The rational cost function with multiple constraints is employed to describe the inventory model. The genetic algorithm is employed to solve the inventory cost function to obtain the optimal solution of inventory checking periods, safe inventory point, product lot-sizes and process lot-sizes of return product. An example is presented to prove the feasibility and validity of the proposed method. Moreover, the influence of manufacturing/remanufacturing lead time and reuse rate of return production on the inventory control strategy of enterprise is analyzed.
文摘The occurrence of leiomyoma of the rectum is uncommon. Most of these lesions are clinically silent and are found incidentally during laparotomy or endoscopic procedures for unrelated conditions. Symptomatic leiomyomas of the rectum are encountered less frequently, with only sporadic reports in the literature. We describe a case of a leiomyoma of the rectum presenting as recurrent lower gastrointestinal hemorrhage and secondary anemia.
基金supported by the Cultivation Fund of the Key Scientific and Technical Innovation Project, Ministry of Education of China
文摘The flow stress behavior of an as-spray-deposited AZ31 magnesium alloy with fine grains was investigated by means of compression tests with a Gleeble 1500 thermal mechanical simulator at isothermal constant strain rates of 0.01, 0.1, 1.0, and 10 s^-1; the testing temperatures ranged from 623 to 723 K. It is demonstrated that a linear equation can be fitted between the Zemer-Hollomon parameter Z and stress in a double-log scale. The effect of deformation parameters on the behavior of recrystallization was analyzed. Dynamic recrystallization （DRX） generally occurs at a higher temperature and at a lower strain rate. The constitutive equation of the spray-deposited AZ31 magnesium alloy is presented by calculating the deformation activation energy （199.8 kJ·mol^-1）. The as-spray-formed AZ31 alloy is easier for DRX nucleation at elevated temperatures due to the fine grain, which provides a large amount of nucleation sites and a high-diffusivity path for the atom.
基金Sponsored by the Heilongjiang Science and Technology Program ( Grant No GC02A125)
文摘Virtual hand is an important medium for implementation of human-computer interaction in the process of virtual assembly. And the comparability between the action of virtual hand and real man-hand has always been regarded as one of the important criteria to judge whether the virtual environment has the property of immersion. On the basis of analyzing the relative position,posture,and motion behavior relationship between virtual hand and the object to be operated during virtual assembly,this paper proposed an implementation method of combining grasp index with collision detecting technology for identifying grasp action of virtual hand. The method is to identify grasp/quit using grasp index and to implement joint angle adjustment through simulation cyclic iteration and joint angle interpolation calculation. Although some traditional method identifying the grasp action on the basis of the shape of the object is operated,the simulation result getting from virtual environment created by EON STUDIO shows that it has good features of serviceability and fidelity to realize operation control of virtual hand.
文摘The field of geriatric cardiology reflects the evolving medical approaches tailored to address the needs of the growing population of oldest old with cardiovascular diseases （CVD）. The burden of CVD is expected to increase particularly for the most common types of chronic heart disease of the elderly including coronary artery disease, heart failure and atrial fibrillation. In this context of dramatic demographic changes, geriatric cardiologists are facing important challenges. In this review, we outline the basic concepts of geriatric cardiology and describe these challenges as well as the unmet needs around this discipline with also a focus on the translation from basic research.
