The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this ...The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.展开更多
In order to reduce the agglomeration of nanographene and improve its dispersibility,six silane coupling agents were used to modify the surface of the nanographene particles.Visual inspection,Fourier-transform infrared...In order to reduce the agglomeration of nanographene and improve its dispersibility,six silane coupling agents were used to modify the surface of the nanographene particles.Visual inspection,Fourier-transform infrared spectroscopy,transmission electron microscopy,Raman spectroscopy,and X-ray diffraction were employed to evaluate the dispersion properties of the resulting graphene in an aqueous solution of silane coupling agents.Results show that all six types of silane coupling agents are efficient in promoting the dispersion of graphene in aqueous solutions,and no obvious sedimentation of the graphene dispersion solution is observed after a stationary storage period of 30 d.Taking 3-aminopropyltriethoxysilane(KH-550)as an example,after the graphene is dispersed in the KH-550 aqueous solution,the carboxyl group on the surface of the graphene reacts with the KH-550 amino group to form an amide bond,and KH-550 is successfully grafted onto the graphene surface.Polar functional groups ionize in water,creating an electrostatic repulsion effect,or hydrophilic functional groups form hydrogen bonds with water molecules,which is believed to improve the dispersion stability of graphene.The dispersed graphene is curled and contains many folds.Each fold has about three or four layers,with an interlayer spacing of about 0.65 nm.The dispersed graphene also has a complete lattice and a reduced number of defects.Nanographene disperses well in silane coupling agent aqueous solutions and can,therefore,be used to prepare cement-based composites.展开更多
The effects of unoiled polyvinyl alcohol(PVA)fiber with four different volume fractions of 0%,1.0%,1.5%and 2.0%on the bending properties of alkali-activated slag(AAS)mortar plates were studied.Meanwhile,the acoustic e...The effects of unoiled polyvinyl alcohol(PVA)fiber with four different volume fractions of 0%,1.0%,1.5%and 2.0%on the bending properties of alkali-activated slag(AAS)mortar plates were studied.Meanwhile,the acoustic emission(AE)technique and a high-speed camera were utilized to detect the crack development over the complete damage process,and the scanning electronic microscopy(SEM)was used to observe the fiber-matrix interface.Test results show that PVA fibers play a significant role in the toughness improvement of AAS plates.However,the enhancing effect of PVA fibers on the bending behaviour of AAS plates at 120 d is not as remarkable as at early ages.It is observed that the failure process of the PVA fiber-reinforced alkali-activated slag plate can be divided into three stages:elastic stage,main crack formation stage and post-peak load stage.Observations on the fracture surface of specimens indicate that the deterioration process of specimens under bending changed from fiber pull-out at 3 and 28 d to fiber fracture at 120 d.展开更多
In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxia...In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.展开更多
To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.Th...To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.The reaction degree of fly ash,non-evaporable water content and the pH value in pore solution were calculated to reveal the mechanical property.The results indicate that as the curing age increases,the peak compressive strength,peak compressive strain and ultimate tensile strength of Eco-HDCC increase.However,the ultimate compressive strain and ultimate tensile strain of Eco-HDCC decrease with the increase in curing age.Besides,as the curing age increases,the reaction degree of fly ash and non-evaporable water content in Eco-HDCC increase,while the pH value in the pore solution of Eco-HDCC decreases.Finally,the simplified compressive and tensile stress-strain constitutive relationship models of Eco-HDCC with a curing age of 28 d were suggested for the structure design safety.展开更多
To explore the tensile property parameters in the structural design of bridge deck link slabs made by ecological high ductility cementitious composites (Eco-HDCC), the tensile properties of Eco-HDCC exposed to interac...To explore the tensile property parameters in the structural design of bridge deck link slabs made by ecological high ductility cementitious composites (Eco-HDCC), the tensile properties of Eco-HDCC exposed to interactive freeze-thaw-carbonation cycles and single carbonation cycles were studied. The carbonation front of Eco-HDCC was determined by X-ray diffraction and differential scanning calorimetry-thermal gravimetric methods. Results indicate that the carbonation front of Eco-HDCC after interaction tests is deeper than that of Eco-HDCC after single carbonation tests. In addition, the ultimate tensile strength for Eco-HDCC shows an increasing trend after the interaction of 1 to 5 cycles compared with that of virgin specimens, while the ultimate tensile strength decreases after the interaction of 10 to 15 cycles. For single carbonation tests, the ultimate tensile strength of Eco-HDCC increases as cycles increase. After being subjected to interaction and single carbonation environments, both the ultimate tensile strain and tensile strain energy of Eco-HDCC decrease as cycles increase, and the decrease degrees of Eco-HDCC after interaction cycles are larger than those of Eco-HDCC after single carbonation. For general consideration, the tensile stress-strain relationship of Eco-HDCC after the interaction of 15 cycles can be adopted in the design of bridge deck link slabs for the purpose of safety.展开更多
In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggre...In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggregates were proposed. First, different kinds of mathematical models for the basic properties （compressive strength, water retention rate, and consistency loss） of RAM with two kinds of admixtures, thickening powders （TP） and self-made powdery admixtures （SSCT） designed for RAM, and the replacement rates were established, while the average relative errors and relative standard errors of these models were calculated. Additionally, the models and their error analyses for the curves of drying shrinkage and curing time of RAM ＋ SSCT at different replacement rates were put forward. The results show that polynomial functions should be used to calculate the basic properties of RAM ＋ TP and RAM ＋ SSCT at different replacement rates. In addition, polynonfial functions are the most optimal models for the sharp shrinkage sections in the curves of drying shrinkage-curing time of RAM ＋ SSCT, while exponential functions should be used as the models for the slow shrinkage sections and steady shrinkage sections.展开更多
To investigate the effect of fiber types on bending and tensile properties of high-strength,high-ductility cementitious composites( HS-HDCCs), ultra-high-molecular-weight polyethylene( PE) fibers,polyvinyl alcohol( PV...To investigate the effect of fiber types on bending and tensile properties of high-strength,high-ductility cementitious composites( HS-HDCCs), ultra-high-molecular-weight polyethylene( PE) fibers,polyvinyl alcohol( PVA) fibers,and copper-plated micro steel fibers were selected as the reinforcement materials. The bending and tensile properties of HS-HDCCs with different fibers with a volume fraction of 2% were studied. The results indicate that PE,PVA,micro steel,and PVA-PE hybrid fibers impart varying degrees of toughening and improve the tensile strength. During the tensile and bending processes,HS-HDCCs with micro steel fibers exhibit a strain-softening phenomenon. HS-HDCCs with PVA fibers or with PVA-PE hybrid fibers can achieve multiple cracking behaviors and strain hardening phenomenon to a certain extent and show slight high-ductility characteristics. HS-HDCCs with PE fibers exhibit multiple cracking behavior and strain hardening phenomenon and show significant high-ductility characteristics. The test results can provide a basis for selecting fibers suitable for HS-HDCCs reinforcement.展开更多
基金The National Natural Science Foundation of China(No.51578141)the Major State Basic Research Development Program of China(No.2015CB655102)China-Japanese Research Cooperative Program-Ministry of Science and Technology in China(No.2016YFE0118200)
文摘The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.
基金The National Key R&D Program of China(No.2018YFC0406701)the National Natural Science Foundation of China(No.51778133,51739008).
文摘In order to reduce the agglomeration of nanographene and improve its dispersibility,six silane coupling agents were used to modify the surface of the nanographene particles.Visual inspection,Fourier-transform infrared spectroscopy,transmission electron microscopy,Raman spectroscopy,and X-ray diffraction were employed to evaluate the dispersion properties of the resulting graphene in an aqueous solution of silane coupling agents.Results show that all six types of silane coupling agents are efficient in promoting the dispersion of graphene in aqueous solutions,and no obvious sedimentation of the graphene dispersion solution is observed after a stationary storage period of 30 d.Taking 3-aminopropyltriethoxysilane(KH-550)as an example,after the graphene is dispersed in the KH-550 aqueous solution,the carboxyl group on the surface of the graphene reacts with the KH-550 amino group to form an amide bond,and KH-550 is successfully grafted onto the graphene surface.Polar functional groups ionize in water,creating an electrostatic repulsion effect,or hydrophilic functional groups form hydrogen bonds with water molecules,which is believed to improve the dispersion stability of graphene.The dispersed graphene is curled and contains many folds.Each fold has about three or four layers,with an interlayer spacing of about 0.65 nm.The dispersed graphene also has a complete lattice and a reduced number of defects.Nanographene disperses well in silane coupling agent aqueous solutions and can,therefore,be used to prepare cement-based composites.
基金The National Basic Research Program of China(973Program)(No.2015CB655100)the National Natural Science Foundation of China(No.51378115)
文摘The effects of unoiled polyvinyl alcohol(PVA)fiber with four different volume fractions of 0%,1.0%,1.5%and 2.0%on the bending properties of alkali-activated slag(AAS)mortar plates were studied.Meanwhile,the acoustic emission(AE)technique and a high-speed camera were utilized to detect the crack development over the complete damage process,and the scanning electronic microscopy(SEM)was used to observe the fiber-matrix interface.Test results show that PVA fibers play a significant role in the toughness improvement of AAS plates.However,the enhancing effect of PVA fibers on the bending behaviour of AAS plates at 120 d is not as remarkable as at early ages.It is observed that the failure process of the PVA fiber-reinforced alkali-activated slag plate can be divided into three stages:elastic stage,main crack formation stage and post-peak load stage.Observations on the fracture surface of specimens indicate that the deterioration process of specimens under bending changed from fiber pull-out at 3 and 28 d to fiber fracture at 120 d.
基金The National Key Research and Development Program of China(No.2018YFC0406701)the National Natural Science Foundation of China(No.51778133,51739008)
文摘In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.
基金The National Natural Science Foundations of China(No.51778133)the Transportation Science&Technology Project of Fujian Province(No.2017Y057)+1 种基金the China Railway Project(No.2017G007-C)Foundation of the China Scholarship Council(No.201906090163).
文摘To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.The reaction degree of fly ash,non-evaporable water content and the pH value in pore solution were calculated to reveal the mechanical property.The results indicate that as the curing age increases,the peak compressive strength,peak compressive strain and ultimate tensile strength of Eco-HDCC increase.However,the ultimate compressive strain and ultimate tensile strain of Eco-HDCC decrease with the increase in curing age.Besides,as the curing age increases,the reaction degree of fly ash and non-evaporable water content in Eco-HDCC increase,while the pH value in the pore solution of Eco-HDCC decreases.Finally,the simplified compressive and tensile stress-strain constitutive relationship models of Eco-HDCC with a curing age of 28 d were suggested for the structure design safety.
基金The National Natural Science Foundation of China(No.51778133)the National Basic Research Program of China(973Program)(No.2015CB655102)+1 种基金the Fundamental Research Funds for the Central Universities(No.3212009403)the China Railway Project(No.2017G007-C)
文摘To explore the tensile property parameters in the structural design of bridge deck link slabs made by ecological high ductility cementitious composites (Eco-HDCC), the tensile properties of Eco-HDCC exposed to interactive freeze-thaw-carbonation cycles and single carbonation cycles were studied. The carbonation front of Eco-HDCC was determined by X-ray diffraction and differential scanning calorimetry-thermal gravimetric methods. Results indicate that the carbonation front of Eco-HDCC after interaction tests is deeper than that of Eco-HDCC after single carbonation tests. In addition, the ultimate tensile strength for Eco-HDCC shows an increasing trend after the interaction of 1 to 5 cycles compared with that of virgin specimens, while the ultimate tensile strength decreases after the interaction of 10 to 15 cycles. For single carbonation tests, the ultimate tensile strength of Eco-HDCC increases as cycles increase. After being subjected to interaction and single carbonation environments, both the ultimate tensile strain and tensile strain energy of Eco-HDCC decrease as cycles increase, and the decrease degrees of Eco-HDCC after interaction cycles are larger than those of Eco-HDCC after single carbonation. For general consideration, the tensile stress-strain relationship of Eco-HDCC after the interaction of 15 cycles can be adopted in the design of bridge deck link slabs for the purpose of safety.
基金The National Key Research and Development Program of China(No.2017YFC0703100)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX18_0081)
文摘In order to expand the engineering application of recycle aggregate mortars （RAM） with aggregates from demolished concretes, the models for the properties of RAM and the replacement rate of these recycled fine aggregates were proposed. First, different kinds of mathematical models for the basic properties （compressive strength, water retention rate, and consistency loss） of RAM with two kinds of admixtures, thickening powders （TP） and self-made powdery admixtures （SSCT） designed for RAM, and the replacement rates were established, while the average relative errors and relative standard errors of these models were calculated. Additionally, the models and their error analyses for the curves of drying shrinkage and curing time of RAM ＋ SSCT at different replacement rates were put forward. The results show that polynomial functions should be used to calculate the basic properties of RAM ＋ TP and RAM ＋ SSCT at different replacement rates. In addition, polynonfial functions are the most optimal models for the sharp shrinkage sections in the curves of drying shrinkage-curing time of RAM ＋ SSCT, while exponential functions should be used as the models for the slow shrinkage sections and steady shrinkage sections.
基金The National Key Research and Development Program of China(No.2016YFC0401610)the National Natural Science Foundation of China(No.51778133,51739008,51438003)
文摘To investigate the effect of fiber types on bending and tensile properties of high-strength,high-ductility cementitious composites( HS-HDCCs), ultra-high-molecular-weight polyethylene( PE) fibers,polyvinyl alcohol( PVA) fibers,and copper-plated micro steel fibers were selected as the reinforcement materials. The bending and tensile properties of HS-HDCCs with different fibers with a volume fraction of 2% were studied. The results indicate that PE,PVA,micro steel,and PVA-PE hybrid fibers impart varying degrees of toughening and improve the tensile strength. During the tensile and bending processes,HS-HDCCs with micro steel fibers exhibit a strain-softening phenomenon. HS-HDCCs with PVA fibers or with PVA-PE hybrid fibers can achieve multiple cracking behaviors and strain hardening phenomenon to a certain extent and show slight high-ductility characteristics. HS-HDCCs with PE fibers exhibit multiple cracking behavior and strain hardening phenomenon and show significant high-ductility characteristics. The test results can provide a basis for selecting fibers suitable for HS-HDCCs reinforcement.
