Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusi...Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.展开更多
Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability o...Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely reported.Herein,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock method.Such a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1) at 2 A g^(−1))at−60℃,outperforming all reported SIB anode materials.Coupled with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1) at−40°C.Based on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.展开更多
Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crac...Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.展开更多
This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junctio...This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.展开更多
The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel ...The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel field may require an understanding of how solar radiation oscillates with other variables or factors since multiple interactions occur during its transfer within the atmosphere. In this study, three years of the incoming shortwave radiation (SWin) and air temperature (Tair) data acquired within the “Institut de Mathématiques et de Sciences Physiques” were analyzed using the continuous wavelet transform to extract the inherent variability of these signals. The underlying characteristics meaning the timescale of these variabilities as well as the lead-lag relationship between SWin and Tair were also examined. With the wavelet power spectrum, the highest variability was evidenced at the 2 - 8 band period for the SWin, coinciding almost with that of Tair. This suggests that these two signals are well interconnected at this temporal scale. The results obtained with the phase (∅xy) difference analysis, reveal that SWin leads Tair by ~ 23.5˚ on average when (0 ∅xy∅xyi.e., periods ≤ 32 days), Tair increases with an increasing SWin since the lags between these two signals range between 0.09 - 2.30 days. However, when looking at their interdependence at a larger temporal scale (> 32 days), Tair lags SWin. An increase in SWin might not directly imply an increase in Tair. Overall, these findings give insight into complex relationships across scales between the incoming shortwave radiation and air temperature in a tropical humid region of Bénin.展开更多
The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and ...The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and Tabouk. Employing the super epoch analysis method, the study concentrated on altitudes of 5 km and 10 km, uncovering significant variations. Seasonal and synoptic-scale variations were considered and excluded when necessary across eight 9-day periods. Both locations showed considerable fluctuations in pressure and temperature before and after the events. At 5 km altitude (21 events), Abha experienced more pressure increases both before (9 vs. 7) and after (12 vs. 11) the events compared to Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). At 10 km altitude (20 events), both regions experienced more decreases than increases in pressure and temperature before the events and more increases afterward. Notably, Abha experienced more pressure increases both 4 days before (9 vs. 7) and after the events (12 vs. 11) than Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). These findings underscore both similarities and differences in atmospheric responses to FDs between Abha and Tabouk. Both locations exhibited cooling trends before and warming trends after the events, with Tabouk demonstrating a more pronounced warming trend post-event. These results enhance our understanding of the atmospheric dynamics linked to FDs and assist in predicting weather patterns associated with these phenomena.展开更多
Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourtee...Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourteen (14) CORDEX-Africa simulations to capture characteristics of the mean temperature for the present day (1979-2005) and associated extremes over Côte d’Ivoire. For this end, the analysis uses the mean variables of the temperature (i.e., minimum temperature (TMIN), mean temperature (TMEAN) and maximum temperature (TMAX)) as well as associated extremes such as intra-period extreme temperature range (ETR), warm spell duration index (HWFI) and warm days index (TX90P) during January-February-March (JFM), April-May-June (AMJ), July-August-September (JAS) and October-November-December (OND) seasons. The results indicate that mean temperature variables (TMIN, TMEAN and TMAX) are underestimated by CORDEX MME in general, except TMEAN in the centre of Côte d’Ivoire. On the other hand, extreme temperature indices are overestimated over Côte d’Ivoire, except ETR in JAS with an underestimation of about 2˚C and TX90P during JAS in the southern part of the country in JFM, AMJ and OND with an underestimation varying between 1% to 4%. In addition, CORDEX MME and observational datasets (CPC and NCEP) have a significant correlation in simulating temperature variables (TMIN, TMEAN, TMIN), while this correlation is not significant in general for extreme temperature, except ETR and HWFI. Furthermore, extreme temperatures (TX90P and HWFI) are characterized by more important interannual variability in the observations CPC and NCEP for ETR. Moreover, mean temperature variables (TMIN, TMEAN, TMAX) show slight interannual variability with respect to the observations CPC and NCEP, which are characterized by the most variability. Overall, CORDEX MME outperforms the seasonal and spatial variability of the temperature and associated extremes over Côte d’Ivoire, although some biases in representing their magnitudes. Thus, the results of the present study will help take appropriate adaptation and mitigation strategies against heatwaves and extreme temperature advent over Côte d’Ivoire as these climate extremes are projected to increase over the country.展开更多
This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to ex...This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.展开更多
Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external...Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.展开更多
Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and prese...Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and preserving paleoenvironmental records.Despite their importance,peatlands outside protected areas face degradation by grazing and fires,threatening their ability to regulate ecosystem processes sensitive to temperature,such as greenhouse gas emissions,water cycling,biological activity,and organic matter decomposition.Since 2016,we have monitored peat temperatures in two contrasting peatlands–one preserved(within a protected area)and one disturbed(outside the protected area)–to understand how anthropogenic disturbances and climate variability impact these fragile ecosystems.Seasonal patterns dominated temperature variation,accounting for 60% of air and 81%–92% of peatland temperature variation.However,average temperatures and amplitudes differed between peatlands and depths.Interannual variability revealed stronger trends in the disturbed peatland,where a 1℃ increase in air temperature caused the trend to increase 0.70℃–0.87℃ on average at depths of 0.85 m–0.92 m.By contrast,the preserved peatland showed smaller increases(0.20℃–0.24℃)at comparable depths(1.06 m–1.24 m),suggesting a greater resilience.Temperature variation in the monitored peatlands was majorly driven by seasonal patterns,as revealed by time series decomposition and sinewave fit.Average temperature and amplitude varied between the two peatlands and among sampling sites,reflecting differences in environmental conditions and measurement depth.Interannual variability also exhibited distinct effects between peatlands and monitoring sites.The time series trend component showed more pronounced fluctuations at shallower depths and in the disturbed peatland.For every 1℃ increase in the trend component of the air temperature,the trend component of the peatland time series increased by 0.70℃ and 0.87℃on average at depths of 0.85 m and 0.92 m,respectively,in the disturbed peatland.In contrast,the preserved peatland exhibited smaller increases of 0.20℃ and 0.24℃ at comparable depths(1.06 m and 1.24 m).These findings highlight the potential for feedback responses between peatland disturbance and climate change,threatening their critical role in regulating carbon and water cycles.Expanding long-term monitoring,strengthening conservation efforts,and raising public awareness are essential to safeguard the ecosystem services provided by tropical mountain peatlands.展开更多
Studying the causes of summer(June–July–August)precipitation anomalies in the middle and lower reaches of the Yangtze River(MLYR)and accurately predicting rainy season precipitation are important to society and the ...Studying the causes of summer(June–July–August)precipitation anomalies in the middle and lower reaches of the Yangtze River(MLYR)and accurately predicting rainy season precipitation are important to society and the economy.In recent years,the sea surface temperature(SST)trend factor has been used to construct regression models for summer precipitation.In this study,through correlation analysis,winter SST anomaly predictors and the winter Central Pacific SST trend predictor(CPT)are identified as closely related to the following MLYR summer precipitation(YRSP).CPT can influence YRSP by inducing anomalous circulations over the North Pacific,guiding warm and moist air northward,and inhibiting the development of the anomalous anticyclone over the Northwest Pacific.This has improved the predictive skill of the seasonal regression model for YRSP.After incorporating the CPT,the correlation coefficient of the YRSP regression model improved by 40%,increasing from 0.45 to 0.63,and the root mean squared error decreased by 22%,from 1.15 to 0.90.展开更多
The pressure and temperature increase resulting from the impact of different threats onto target materials is analyzed with a unified laboratory-scale setup.This allows deriving qualitative information on the occurrin...The pressure and temperature increase resulting from the impact of different threats onto target materials is analyzed with a unified laboratory-scale setup.This allows deriving qualitative information on the occurring phenomenology as well as quantitative statements about the relative effects sizes as a function of target material and threat.The considered target materials are steel,aluminum,and magnesium.As threats,kinetic energy penetrator,explosively formed projectile,and shaped charge jet are used.For the investigated combinations,the measured overpressures vary by a factor of up to 5 for a variation of the material,by a factor of up to 7 for a variation of the threat,and by a factor larger than 15for a simultaneous variation of both.The obtained results as well as the experimental approach are relevant for the basic understanding of impact effects and risks due to material reactivity.The paper combines two main aims.Firstly,to provide a summary of own prior work in a coherent journal article and,secondly,to review and discuss these earlier results with a new perspective.展开更多
Thermal management system is highly desirable to guarantee the performance and thermal safety of lithium-ion batteries,but it reduces the energy density of battery modules and even is unable to provide highly effectiv...Thermal management system is highly desirable to guarantee the performance and thermal safety of lithium-ion batteries,but it reduces the energy density of battery modules and even is unable to provide highly effective protection.Here,a thermal management function integrated material is presented based on high-temperature resistant aerogel and phase change material and is applied at both charge–discharge process and thermal runaway condition.In this sandwich structure Paraffin@SiC nanowire/Aerogel sheet (denoted as PA@SAS) system,SiC nanowires endow the middle aerogel sheet (SAS) a dual nano-network structure.The enhanced mechanical properties of SAS were studied by compressive tests and dynamic mechanical analysis.Besides,the thermal conductivity of SAS at 600°C is only 0.042 W/(m K).The surface phase change material layers facilitate temperature uniformity of batteries (surface temperature difference less than 1.82°C) through latent heat.Moreover,a large-format battery module with four 58 Ah LiNi0.5Co0.2Mn0.3O2LIBs was assembled.PA@SAS successfully prevents thermal runaway propagation,yielding a temperature gap of 602°C through the 2 mm-thick cross section.PA@SAS also exhibits excellent performance in other safety issues such as temperature rise rate,flame heat flux,etc.The lightweight property and effective insulation performance achieves significant safety enhancement with mass and volume energy density reduction of only 0.79%and 5.4%,respectively.The originality of the present research stems from the micro and macro structure design of the proposed thermal management material and the combination of intrinsic advantages of every component.This work provides a reliable design of achieving the integration of thermal management functions into an aerogel composite and improves the thermal safety of lithium-ion batteries.展开更多
To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-coolin...To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.展开更多
BACKGROUND: Targeted temperature management(TTM) is a common therapeutic intervention, yet its cost-effectiveness remains uncertain. This study aimed to evaluate the real-world cost-effectiveness of TTM compared with ...BACKGROUND: Targeted temperature management(TTM) is a common therapeutic intervention, yet its cost-effectiveness remains uncertain. This study aimed to evaluate the real-world cost-effectiveness of TTM compared with that of conventional care in adult out-of-hospital cardiac arrest(OHCA) survivors using clinical patient-level data.METHODS: We conducted a retrospective cohort study at an academic medical center in the USA to assess the cost-effectiveness of TTM in adult non-traumatic OHCA survivors between 1 January, 2019 and 30 June, 2023. The primary outcome was survival to hospital discharge. Incremental cost-effectiveness ratios(ICERs) were calculated and compared with various decision makers' willingness to pay. Cost-effectiveness acceptability curves were utilized to evaluate the economic attractiveness of TTM. Uncertainty about the incremental cost and effect was explored with a 95% confidence ellipse.RESULTS: Among 925 non-traumatic OHCA survivors, only 30(3%) received TTM. After adjusting for potential confounders, the TTM group did not demonstrate a significantly lower cost(delta cost-$5,141, 95% confidence interval [95% CI]: $-35,347 to $25,065, P=0.79) and higher survival to hospital discharge(delta effect 6%, 95% CI:-11% to 23%, P=0.41). Additionally, a 95% confidence ellipse indicated uncertainty reflected by evidence that the true value of the ICER could be in any of the quadrants of the cost-effectiveness plane.CONCLUSION: Although TTM did not demonstrate a clear survival benefit in this study, its potential cost-effectiveness warrants further investigation with larger sample sizes. These findings highlight the need for additional research to optimize TTM use in OHCA care and inform resource allocation decisions.展开更多
Low-to medium-maturity oil shale resources display substantial reserves, offering promising prospects for in-situ conversion inChina. Investigating the evolution of the mechanical properties of the reservoir and capro...Low-to medium-maturity oil shale resources display substantial reserves, offering promising prospects for in-situ conversion inChina. Investigating the evolution of the mechanical properties of the reservoir and caprock under in-situ high-temperature and confine-ment conditions is of considerable importance. Compared to conventional mechanical experiments on rock samples after high-temperat-ure treatment, in-situ high-temperature experiments can more accurately characterize the behavior of rocks in practical engineering,thereby providing a more realistic reflection of their mechanical properties. In this study, an in-situ high-temperature triaxial compressiontesting machine is developed to conduct in-situ compression tests on sandstone at different temperatures(25, 200, 400, 500, and 650℃)and confining pressures(0, 10, and 20 MPa). Based on the experimental results, the temperature-dependent changes in compressivestrength, peak strain, elastic modulus, Poisson's ratio, cohesion, and internal friction angle are thoroughly analyzed and discussed. Resultsindicate that the mass of sandstone gradually decreases as the temperature increases. The thermal conductivity and thermal diffusivity ofsandstone exhibit a linear relationship with temperature. Peak stress decreases as the temperature rises, while it increases with higher con-fining pressures. Notably, the influence of confining pressure on peak stress diminishes at higher temperatures. Additionally, as the tem-perature rises, the Poisson's ratio of sandstone decreases. The internal friction angle also decreases with increasing temperature, with400℃ acting as the threshold temperature. Interestingly, under uniaxial conditions, the damage stress of sandstone is less affected by tem-perature. However, when the confining pressure is 10 or 20 MPa, the damage stress decreases as the temperature increases. This study en-hances our understanding of the influence of in-situ high-temperature and confinement conditions on the mechanical properties of sand-stone strata. The study also provides valuable references and experimental data that support the development of low-to medium-maturityoil shale resources.展开更多
Microstructures and properties of mortar using ammonium phosphate and potassium phosphate were tested and compared in this case.Moreover,two cementitious additions and two lightweight aggregates,including fly ash,redi...Microstructures and properties of mortar using ammonium phosphate and potassium phosphate were tested and compared in this case.Moreover,two cementitious additions and two lightweight aggregates,including fly ash,redispersible latex powder,ceramsite sand,and rubber powder,were respectively tried to be applied in magnesium ammonium phosphate cement mortar in order to modify the microstructures and properties.The experimental results show that potassium phosphate is not suitable for magnesium phosphate cement mortar for cold region construction purpose.Although fly ash can bring positive modification in the condition of normal temperature curing,it brings negative effects in the condition of sub-zero temperature curing.Either redispersible latex powder or ceramsite sand can improve the freeze-thaw cycling resistance of magnesium phosphate cement mortar in the conditions of low temperature coupled with freeze-thaw cycling,but only the ceramsite sand can improve both mechanical properties and freeze-thaw cycling resistance.The modification caused by ceramsite sand is mainly due to the exceptional bonding strength between hardened cement paste and the porous surface of ceramsite and the porous structure of ceramsite for the release of frost heave stress.展开更多
Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect ...Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect on properties of ceramics.This study investigated the crucial sintering temperature for 3D printed ceramics to ensure the desired properties.The results indicate that all samples exhibit a consistent layered structure across the experimental sintering temperatures.When the sintering temperature is increased from 1,250℃ to 1,350℃,the grain's morphology changes from spherical to plate-like.Surface morphology analysis reveals a decrease in surface roughness at sintering temperatures above 1,350℃.Mechanical tests show improved flexural strength and stiffness as the sintering temperature rises.Friction and wear experiments demonstrate that as the sintering temperature increases from 1,450℃ to 1,550℃,the wear pattern on ceramic surfaces transitions from deep pits to shallow grooves.The increase in sintering temperature effectively enhances the wear resistance of 3D printed alumina ceramics.This improvement plays a significant role in expanding the application field of these ceramics,prolonging the lifespan of parts,reducing production costs,enhancing performance,and promoting environmental protection.In this study,ceramics achieve the highest strength and best wear resistance when sintered at 1,600℃,resulting in the best overall performance.展开更多
Air temperature is an important indicator to analyze climate change in mountainous areas.ERA5 reanalysis air temperature data are important products that were widely used to analyze temperature change in mountainous a...Air temperature is an important indicator to analyze climate change in mountainous areas.ERA5 reanalysis air temperature data are important products that were widely used to analyze temperature change in mountainous areas.However,the reliability of ERA5 reanalysis air temperature over the Qilian Mountains(QLM)is unclear.In this study,we evaluated the reliability of ERA5 monthly averaged reanalysis 2 m air temperature data using the observations at 17 meteorological stations in the QLM from 1979 to 2017.The results showed that:ERA5 reanalysis monthly averaged air temperature data have a good applicability in the QLM in general(R2=0.99).ERA5 reanalysis temperature data overestimated the observed temperature in the QLM in general.Root mean square error(RMSE)increases with the increasing of elevation range,showing that the reliability of ERA5 reanalysis temperature data is worse in higher elevation than that in lower altitude.ERA5 reanalysis temperature can capture observational warming rates well.All the smallest warming rates of observational temperature and ERA5 reanalysis temperature are found in winter,with the warming rates of 0.393°C/10a and 0.360°C/10a,respectively.This study will provide a reference for the application of ERA5 reanalysis monthly averaged air temperature data at different elevation ranges in the Qilian Mountains.展开更多
The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design c...The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design concept of eutectic electrolyte is presented by mixing long chain polymer molecules,polyethylene glycol dimethyl ether(PEGDME),with H_(2)O based on zinc trifluoromethyl sulfonate(Zn(OTf)2),to reconstruct the Zn^(2+)solvated structure and in situ modified the adsorption layer on Zn electrode surface.Molecular dynamics simulations(MD),density functional theory(DFT)calculations were combined with experiment to prove that the long-chain polymer-PEGDME could effectively reduce side reactions,change the solvation structure of the electrolyte and priority absorbed on Zn(002),achieving a stable dendrite-free Zn anode.Due to the comprehensive regulation of solvation structure and zinc deposition by PEGDME,it can stably cycle for over 3200 h at room temperature at 0.5 mA/cm^(2)and 0.5 mAh/cm^(2).Even at high-temperature environments of 60℃,it can steadily work for more than 800 cycles(1600 h).Improved cyclic stability and rate performance of aqueous Zn‖VO_(2)batteries in modified electrolyte were also achieved at both room and high temperatures.Beyond that,the demonstration of stable and high-capacity Zn‖VO_(2)pouch cells also implies its practical application.展开更多
基金supported by the National Science and Technology Major Project,China(No.2019-VI-0004-0118)the National Natural Science Foundation of China(No.51771152)the National Key R&D Program of China(No.2018YFB1106800)。
文摘Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.
基金supported from Science and Technology Development Program of Jilin Province(Nos.20240101128JC,20230402058GH)National Natural Science Foundation of China(No.52130101).
文摘Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely reported.Herein,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock method.Such a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1) at 2 A g^(−1))at−60℃,outperforming all reported SIB anode materials.Coupled with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1) at−40°C.Based on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.
基金funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan(Grant No.AP19680589).
文摘Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.
文摘This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.
文摘The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel field may require an understanding of how solar radiation oscillates with other variables or factors since multiple interactions occur during its transfer within the atmosphere. In this study, three years of the incoming shortwave radiation (SWin) and air temperature (Tair) data acquired within the “Institut de Mathématiques et de Sciences Physiques” were analyzed using the continuous wavelet transform to extract the inherent variability of these signals. The underlying characteristics meaning the timescale of these variabilities as well as the lead-lag relationship between SWin and Tair were also examined. With the wavelet power spectrum, the highest variability was evidenced at the 2 - 8 band period for the SWin, coinciding almost with that of Tair. This suggests that these two signals are well interconnected at this temporal scale. The results obtained with the phase (∅xy) difference analysis, reveal that SWin leads Tair by ~ 23.5˚ on average when (0 ∅xy∅xyi.e., periods ≤ 32 days), Tair increases with an increasing SWin since the lags between these two signals range between 0.09 - 2.30 days. However, when looking at their interdependence at a larger temporal scale (> 32 days), Tair lags SWin. An increase in SWin might not directly imply an increase in Tair. Overall, these findings give insight into complex relationships across scales between the incoming shortwave radiation and air temperature in a tropical humid region of Bénin.
文摘The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and Tabouk. Employing the super epoch analysis method, the study concentrated on altitudes of 5 km and 10 km, uncovering significant variations. Seasonal and synoptic-scale variations were considered and excluded when necessary across eight 9-day periods. Both locations showed considerable fluctuations in pressure and temperature before and after the events. At 5 km altitude (21 events), Abha experienced more pressure increases both before (9 vs. 7) and after (12 vs. 11) the events compared to Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). At 10 km altitude (20 events), both regions experienced more decreases than increases in pressure and temperature before the events and more increases afterward. Notably, Abha experienced more pressure increases both 4 days before (9 vs. 7) and after the events (12 vs. 11) than Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). These findings underscore both similarities and differences in atmospheric responses to FDs between Abha and Tabouk. Both locations exhibited cooling trends before and warming trends after the events, with Tabouk demonstrating a more pronounced warming trend post-event. These results enhance our understanding of the atmospheric dynamics linked to FDs and assist in predicting weather patterns associated with these phenomena.
文摘Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourteen (14) CORDEX-Africa simulations to capture characteristics of the mean temperature for the present day (1979-2005) and associated extremes over Côte d’Ivoire. For this end, the analysis uses the mean variables of the temperature (i.e., minimum temperature (TMIN), mean temperature (TMEAN) and maximum temperature (TMAX)) as well as associated extremes such as intra-period extreme temperature range (ETR), warm spell duration index (HWFI) and warm days index (TX90P) during January-February-March (JFM), April-May-June (AMJ), July-August-September (JAS) and October-November-December (OND) seasons. The results indicate that mean temperature variables (TMIN, TMEAN and TMAX) are underestimated by CORDEX MME in general, except TMEAN in the centre of Côte d’Ivoire. On the other hand, extreme temperature indices are overestimated over Côte d’Ivoire, except ETR in JAS with an underestimation of about 2˚C and TX90P during JAS in the southern part of the country in JFM, AMJ and OND with an underestimation varying between 1% to 4%. In addition, CORDEX MME and observational datasets (CPC and NCEP) have a significant correlation in simulating temperature variables (TMIN, TMEAN, TMIN), while this correlation is not significant in general for extreme temperature, except ETR and HWFI. Furthermore, extreme temperatures (TX90P and HWFI) are characterized by more important interannual variability in the observations CPC and NCEP for ETR. Moreover, mean temperature variables (TMIN, TMEAN, TMAX) show slight interannual variability with respect to the observations CPC and NCEP, which are characterized by the most variability. Overall, CORDEX MME outperforms the seasonal and spatial variability of the temperature and associated extremes over Côte d’Ivoire, although some biases in representing their magnitudes. Thus, the results of the present study will help take appropriate adaptation and mitigation strategies against heatwaves and extreme temperature advent over Côte d’Ivoire as these climate extremes are projected to increase over the country.
文摘This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.
基金supported by China Agriculture Research System of MOF and MARA(Grant No.CARS23-B10)The Major Science and Technology Projects in Hainan Province(Grant No.ZDKJ2021005)+1 种基金Key R&D projects in Shandong Province(Grant No.LJNY202106)Central Public-interest Scientific Institution Basal Research Fund(Grant No.IVF-BRF2023006)。
文摘Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.
基金This study was financed in part by the Coordenacao de Aperfeiçoamento de Pessoal de Nivel Superior-Brasil(CAPES)-Finance Code 001the Brazilian Conselho Nacional de Pesquisa-CNPq(study and research grants and research funding-Process 303666/2018-8,408162/2018-0,441335/2020-9,302969/2021-7,and 50484/2022-4)Fundacao de ApoioaPesquisa do Estado de Minas Gerais-FAPEMIG(study grants and research funding-Process CRA/APQ 0100-18,APQ-03364-21 and CAG/PPM 00568-16).
文摘Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and preserving paleoenvironmental records.Despite their importance,peatlands outside protected areas face degradation by grazing and fires,threatening their ability to regulate ecosystem processes sensitive to temperature,such as greenhouse gas emissions,water cycling,biological activity,and organic matter decomposition.Since 2016,we have monitored peat temperatures in two contrasting peatlands–one preserved(within a protected area)and one disturbed(outside the protected area)–to understand how anthropogenic disturbances and climate variability impact these fragile ecosystems.Seasonal patterns dominated temperature variation,accounting for 60% of air and 81%–92% of peatland temperature variation.However,average temperatures and amplitudes differed between peatlands and depths.Interannual variability revealed stronger trends in the disturbed peatland,where a 1℃ increase in air temperature caused the trend to increase 0.70℃–0.87℃ on average at depths of 0.85 m–0.92 m.By contrast,the preserved peatland showed smaller increases(0.20℃–0.24℃)at comparable depths(1.06 m–1.24 m),suggesting a greater resilience.Temperature variation in the monitored peatlands was majorly driven by seasonal patterns,as revealed by time series decomposition and sinewave fit.Average temperature and amplitude varied between the two peatlands and among sampling sites,reflecting differences in environmental conditions and measurement depth.Interannual variability also exhibited distinct effects between peatlands and monitoring sites.The time series trend component showed more pronounced fluctuations at shallower depths and in the disturbed peatland.For every 1℃ increase in the trend component of the air temperature,the trend component of the peatland time series increased by 0.70℃ and 0.87℃on average at depths of 0.85 m and 0.92 m,respectively,in the disturbed peatland.In contrast,the preserved peatland exhibited smaller increases of 0.20℃ and 0.24℃ at comparable depths(1.06 m and 1.24 m).These findings highlight the potential for feedback responses between peatland disturbance and climate change,threatening their critical role in regulating carbon and water cycles.Expanding long-term monitoring,strengthening conservation efforts,and raising public awareness are essential to safeguard the ecosystem services provided by tropical mountain peatlands.
基金Guangdong Major Project of Basic and Applied Basic Research(2020B0301030004)National Natural Science Foundation of China(42175061)。
文摘Studying the causes of summer(June–July–August)precipitation anomalies in the middle and lower reaches of the Yangtze River(MLYR)and accurately predicting rainy season precipitation are important to society and the economy.In recent years,the sea surface temperature(SST)trend factor has been used to construct regression models for summer precipitation.In this study,through correlation analysis,winter SST anomaly predictors and the winter Central Pacific SST trend predictor(CPT)are identified as closely related to the following MLYR summer precipitation(YRSP).CPT can influence YRSP by inducing anomalous circulations over the North Pacific,guiding warm and moist air northward,and inhibiting the development of the anomalous anticyclone over the Northwest Pacific.This has improved the predictive skill of the seasonal regression model for YRSP.After incorporating the CPT,the correlation coefficient of the YRSP regression model improved by 40%,increasing from 0.45 to 0.63,and the root mean squared error decreased by 22%,from 1.15 to 0.90.
文摘The pressure and temperature increase resulting from the impact of different threats onto target materials is analyzed with a unified laboratory-scale setup.This allows deriving qualitative information on the occurring phenomenology as well as quantitative statements about the relative effects sizes as a function of target material and threat.The considered target materials are steel,aluminum,and magnesium.As threats,kinetic energy penetrator,explosively formed projectile,and shaped charge jet are used.For the investigated combinations,the measured overpressures vary by a factor of up to 5 for a variation of the material,by a factor of up to 7 for a variation of the threat,and by a factor larger than 15for a simultaneous variation of both.The obtained results as well as the experimental approach are relevant for the basic understanding of impact effects and risks due to material reactivity.The paper combines two main aims.Firstly,to provide a summary of own prior work in a coherent journal article and,secondly,to review and discuss these earlier results with a new perspective.
基金Collaborative Innovation University Project of Anhui Province (GXXT-2022-018)National Natural Science Foundation of China (52374238 and 52074253)+3 种基金Natural Science Foundation of Anhui Province (2108085J28)Taishan Industrial Leading Talent Project (2019TSCYCX-27)Major Science and Technology Projects of Anhui Province(202103a05020011)Youth Innovation Promotion Association(CX2320007001)。
文摘Thermal management system is highly desirable to guarantee the performance and thermal safety of lithium-ion batteries,but it reduces the energy density of battery modules and even is unable to provide highly effective protection.Here,a thermal management function integrated material is presented based on high-temperature resistant aerogel and phase change material and is applied at both charge–discharge process and thermal runaway condition.In this sandwich structure Paraffin@SiC nanowire/Aerogel sheet (denoted as PA@SAS) system,SiC nanowires endow the middle aerogel sheet (SAS) a dual nano-network structure.The enhanced mechanical properties of SAS were studied by compressive tests and dynamic mechanical analysis.Besides,the thermal conductivity of SAS at 600°C is only 0.042 W/(m K).The surface phase change material layers facilitate temperature uniformity of batteries (surface temperature difference less than 1.82°C) through latent heat.Moreover,a large-format battery module with four 58 Ah LiNi0.5Co0.2Mn0.3O2LIBs was assembled.PA@SAS successfully prevents thermal runaway propagation,yielding a temperature gap of 602°C through the 2 mm-thick cross section.PA@SAS also exhibits excellent performance in other safety issues such as temperature rise rate,flame heat flux,etc.The lightweight property and effective insulation performance achieves significant safety enhancement with mass and volume energy density reduction of only 0.79%and 5.4%,respectively.The originality of the present research stems from the micro and macro structure design of the proposed thermal management material and the combination of intrinsic advantages of every component.This work provides a reliable design of achieving the integration of thermal management functions into an aerogel composite and improves the thermal safety of lithium-ion batteries.
基金financially supported by National Natural Science Foundation of China(Project No.51878156).
文摘To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.
基金supported by Faculty of MedicineChiang Mai University+2 种基金supported by the National Center for Advancing Translational SciencesNational Institutes of Healththrough grant number UL1 TR001860. The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH。
文摘BACKGROUND: Targeted temperature management(TTM) is a common therapeutic intervention, yet its cost-effectiveness remains uncertain. This study aimed to evaluate the real-world cost-effectiveness of TTM compared with that of conventional care in adult out-of-hospital cardiac arrest(OHCA) survivors using clinical patient-level data.METHODS: We conducted a retrospective cohort study at an academic medical center in the USA to assess the cost-effectiveness of TTM in adult non-traumatic OHCA survivors between 1 January, 2019 and 30 June, 2023. The primary outcome was survival to hospital discharge. Incremental cost-effectiveness ratios(ICERs) were calculated and compared with various decision makers' willingness to pay. Cost-effectiveness acceptability curves were utilized to evaluate the economic attractiveness of TTM. Uncertainty about the incremental cost and effect was explored with a 95% confidence ellipse.RESULTS: Among 925 non-traumatic OHCA survivors, only 30(3%) received TTM. After adjusting for potential confounders, the TTM group did not demonstrate a significantly lower cost(delta cost-$5,141, 95% confidence interval [95% CI]: $-35,347 to $25,065, P=0.79) and higher survival to hospital discharge(delta effect 6%, 95% CI:-11% to 23%, P=0.41). Additionally, a 95% confidence ellipse indicated uncertainty reflected by evidence that the true value of the ICER could be in any of the quadrants of the cost-effectiveness plane.CONCLUSION: Although TTM did not demonstrate a clear survival benefit in this study, its potential cost-effectiveness warrants further investigation with larger sample sizes. These findings highlight the need for additional research to optimize TTM use in OHCA care and inform resource allocation decisions.
基金financially supported by the Beijing Natural Science Foundation,China (No.JQ21028)the National Natural Science Foundation of China (Nos.52311530070,52278326,and 52004015)+2 种基金the Major National Science and Technology Project for Deep Earth,China (No.2024ZD1003805)the Project from PetroChina RIPED:the Study on the evolution law of Mineral Structure and Rock Mechanical Properties Under Ultra-High Temperature Conditions (No.2022-KFKT-02)the Fundamental Research Funds for the Central Universities of China (No.FRF-IDRY-20-003,Interdisciplinary Research Project for Young Teachers of USTB)。
文摘Low-to medium-maturity oil shale resources display substantial reserves, offering promising prospects for in-situ conversion inChina. Investigating the evolution of the mechanical properties of the reservoir and caprock under in-situ high-temperature and confine-ment conditions is of considerable importance. Compared to conventional mechanical experiments on rock samples after high-temperat-ure treatment, in-situ high-temperature experiments can more accurately characterize the behavior of rocks in practical engineering,thereby providing a more realistic reflection of their mechanical properties. In this study, an in-situ high-temperature triaxial compressiontesting machine is developed to conduct in-situ compression tests on sandstone at different temperatures(25, 200, 400, 500, and 650℃)and confining pressures(0, 10, and 20 MPa). Based on the experimental results, the temperature-dependent changes in compressivestrength, peak strain, elastic modulus, Poisson's ratio, cohesion, and internal friction angle are thoroughly analyzed and discussed. Resultsindicate that the mass of sandstone gradually decreases as the temperature increases. The thermal conductivity and thermal diffusivity ofsandstone exhibit a linear relationship with temperature. Peak stress decreases as the temperature rises, while it increases with higher con-fining pressures. Notably, the influence of confining pressure on peak stress diminishes at higher temperatures. Additionally, as the tem-perature rises, the Poisson's ratio of sandstone decreases. The internal friction angle also decreases with increasing temperature, with400℃ acting as the threshold temperature. Interestingly, under uniaxial conditions, the damage stress of sandstone is less affected by tem-perature. However, when the confining pressure is 10 or 20 MPa, the damage stress decreases as the temperature increases. This study en-hances our understanding of the influence of in-situ high-temperature and confinement conditions on the mechanical properties of sand-stone strata. The study also provides valuable references and experimental data that support the development of low-to medium-maturityoil shale resources.
基金Funded by the National Natural Science Foundation of China(No.51878227)。
文摘Microstructures and properties of mortar using ammonium phosphate and potassium phosphate were tested and compared in this case.Moreover,two cementitious additions and two lightweight aggregates,including fly ash,redispersible latex powder,ceramsite sand,and rubber powder,were respectively tried to be applied in magnesium ammonium phosphate cement mortar in order to modify the microstructures and properties.The experimental results show that potassium phosphate is not suitable for magnesium phosphate cement mortar for cold region construction purpose.Although fly ash can bring positive modification in the condition of normal temperature curing,it brings negative effects in the condition of sub-zero temperature curing.Either redispersible latex powder or ceramsite sand can improve the freeze-thaw cycling resistance of magnesium phosphate cement mortar in the conditions of low temperature coupled with freeze-thaw cycling,but only the ceramsite sand can improve both mechanical properties and freeze-thaw cycling resistance.The modification caused by ceramsite sand is mainly due to the exceptional bonding strength between hardened cement paste and the porous surface of ceramsite and the porous structure of ceramsite for the release of frost heave stress.
基金supported by the Xinjiang Tianchi Talent Introduction Plan (51052300585)the Fundamental Research Funds for Autonomous Region Universities (XJEDU2022P002)+1 种基金the Natural science foundation project of Xinjiang Uygur Autonomous Region (2023D01C192,2023D01C33)the Tianshan Innovation Team Program of Xinjiang Uygur Autonomous Region (2023D14001)。
文摘Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect on properties of ceramics.This study investigated the crucial sintering temperature for 3D printed ceramics to ensure the desired properties.The results indicate that all samples exhibit a consistent layered structure across the experimental sintering temperatures.When the sintering temperature is increased from 1,250℃ to 1,350℃,the grain's morphology changes from spherical to plate-like.Surface morphology analysis reveals a decrease in surface roughness at sintering temperatures above 1,350℃.Mechanical tests show improved flexural strength and stiffness as the sintering temperature rises.Friction and wear experiments demonstrate that as the sintering temperature increases from 1,450℃ to 1,550℃,the wear pattern on ceramic surfaces transitions from deep pits to shallow grooves.The increase in sintering temperature effectively enhances the wear resistance of 3D printed alumina ceramics.This improvement plays a significant role in expanding the application field of these ceramics,prolonging the lifespan of parts,reducing production costs,enhancing performance,and promoting environmental protection.In this study,ceramics achieve the highest strength and best wear resistance when sintered at 1,600℃,resulting in the best overall performance.
基金financially supported by the National Natural Science Foundation of China(No.41621001)。
文摘Air temperature is an important indicator to analyze climate change in mountainous areas.ERA5 reanalysis air temperature data are important products that were widely used to analyze temperature change in mountainous areas.However,the reliability of ERA5 reanalysis air temperature over the Qilian Mountains(QLM)is unclear.In this study,we evaluated the reliability of ERA5 monthly averaged reanalysis 2 m air temperature data using the observations at 17 meteorological stations in the QLM from 1979 to 2017.The results showed that:ERA5 reanalysis monthly averaged air temperature data have a good applicability in the QLM in general(R2=0.99).ERA5 reanalysis temperature data overestimated the observed temperature in the QLM in general.Root mean square error(RMSE)increases with the increasing of elevation range,showing that the reliability of ERA5 reanalysis temperature data is worse in higher elevation than that in lower altitude.ERA5 reanalysis temperature can capture observational warming rates well.All the smallest warming rates of observational temperature and ERA5 reanalysis temperature are found in winter,with the warming rates of 0.393°C/10a and 0.360°C/10a,respectively.This study will provide a reference for the application of ERA5 reanalysis monthly averaged air temperature data at different elevation ranges in the Qilian Mountains.
基金supported by the National Natural Science Foundation of China(Nos.22208221,22178221)the Natural Science Foundation of Guangdong Province(Nos.2024A1515011078,2024A1515011507)+1 种基金the Shenzhen Science and Technology Program(Nos.JCYJ20220818095805012,JCYJ20230808105109019)the Start-up Research Funding of Shenzhen University(No.868-000001032522).
文摘The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design concept of eutectic electrolyte is presented by mixing long chain polymer molecules,polyethylene glycol dimethyl ether(PEGDME),with H_(2)O based on zinc trifluoromethyl sulfonate(Zn(OTf)2),to reconstruct the Zn^(2+)solvated structure and in situ modified the adsorption layer on Zn electrode surface.Molecular dynamics simulations(MD),density functional theory(DFT)calculations were combined with experiment to prove that the long-chain polymer-PEGDME could effectively reduce side reactions,change the solvation structure of the electrolyte and priority absorbed on Zn(002),achieving a stable dendrite-free Zn anode.Due to the comprehensive regulation of solvation structure and zinc deposition by PEGDME,it can stably cycle for over 3200 h at room temperature at 0.5 mA/cm^(2)and 0.5 mAh/cm^(2).Even at high-temperature environments of 60℃,it can steadily work for more than 800 cycles(1600 h).Improved cyclic stability and rate performance of aqueous Zn‖VO_(2)batteries in modified electrolyte were also achieved at both room and high temperatures.Beyond that,the demonstration of stable and high-capacity Zn‖VO_(2)pouch cells also implies its practical application.
