The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in r...The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.展开更多
A sort of rare earth Mg-based system hydrogen storage alloys with AB3-type was prepared by double-roller rapid quenching method. The alloys were nanocrystalline multi-phase structures composed of LaNi3 phase and LaNi5...A sort of rare earth Mg-based system hydrogen storage alloys with AB3-type was prepared by double-roller rapid quenching method. The alloys were nanocrystalline multi-phase structures composed of LaNi3 phase and LaNi5 phase by X-ray diffraction and scanning electron microscopy analyses, and the suitable absorption/desorption plateau was revealed by the measurement of P-C-I curve. Electrochemical studies indicate that the alloys exhibit good electrochemical properties such as high capacity and stable cycle life, and the discharge capacity is 369 mAh·g-1 at 0.2 C (72 mA·g-1). after 460 cycles, the capacity decay was only 19.4% at 2 C (720 mA·g-1).展开更多
The rare earth based hydrogen storage alloys Ml_ 0.7Mm_ 0.3(Ni_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3) were chosen as objects of investigation in this paper. The effects of particle size on electrochemical properties of the allo...The rare earth based hydrogen storage alloys Ml_ 0.7Mm_ 0.3(Ni_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3) were chosen as objects of investigation in this paper. The effects of particle size on electrochemical properties of the alloy were investigated. The results indicate that the alloy with particle size of 100 and 150 mesh shows good activation behavior and high discharge capacity (the first discharge capacity and the maximum discharge capacity), but poor cycling stability, low capacity retention and high discharge capacity rate. The Ml_ 0.7Mm_ 0.3(Ni_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3) alloy with particle size of 150 mesh shows excellent electrochemical properties.展开更多
The rare earth based hydrogen storage alloys Mm_xMl_ 1-xNi_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3(x=0～0.50) were investigated in this work. The influences of phase structure on the PCT characteristics were analyzed by means of ...The rare earth based hydrogen storage alloys Mm_xMl_ 1-xNi_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3(x=0～0.50) were investigated in this work. The influences of phase structure on the PCT characteristics were analyzed by means of electrochemical measurements. The results indicate that there is a strict relationship between crystal volume and PCT characteristics.展开更多
The La0.55Pr0.05Nd0.15Mg0.25Ni3.5（Co0.5Al0.5）x（x=0.0, 0.1, 0.3, 0.5） alloys were prepared by magnetic levitation melting under an Ar atmosphere, and the effects of Co and Al on the hydrogen storage and electrochem...The La0.55Pr0.05Nd0.15Mg0.25Ni3.5（Co0.5Al0.5）x（x=0.0, 0.1, 0.3, 0.5） alloys were prepared by magnetic levitation melting under an Ar atmosphere, and the effects of Co and Al on the hydrogen storage and electrochemical properties were systematically investigated by pressure composition isotherms, cyclic voltammetry, Tafel polarization and electrochemical impedance spectroscopy testing. The results showed that the alloy phases were mainly consisted of （La,Pr）（Ni,Co）5, LaMg2Ni9, （La,Nd）2Ni7 and LaNi3 phases, and the cell volumes of （La,Pr）（Ni,Co）5, LaMg2Ni9, （La,Nd）2Ni7 and LaNi3 phases expanded with Co and Al element added. The hydrogen storage capacity initially increased from 1.36 （x=0） to 1.47 wt.% （x=0.3） and then decreased to 1.22 wt.% （x=0.5）. The discharge capacity retention and cycle stability of the alloy electrodes were improved with the increase of Co and Al contents. The La0.55Pr0.05Nd0.15Mg0.25Ni3.5（Co0.5Al0.5）0.3 alloy electrode possessed better electrochemical kinetic characteristic.展开更多
The present study dealt with investigations on the effects of annealing on the hydrogen storage properties of La 1.6 Ti 0.4 MgNi 9 alloys.The experimental alloys were prepared by magnetic levitation melting followed b...The present study dealt with investigations on the effects of annealing on the hydrogen storage properties of La 1.6 Ti 0.4 MgNi 9 alloys.The experimental alloys were prepared by magnetic levitation melting followed by annealing treatment.For La 1.6 Ti 0.4 MgNi 9 alloys,LaNi 5,LaNi 3 and LaMg 2 Ni 9 were the main phases,Ti 2 Ni phase appeared at 900℃.Annealing not only enhanced the maximum and effective hydrogen storage capacity,improved the hydrogen absorption/desorption kinetics,but also increased the discharge capacity.The cyclic stability had been improved markedly by annealing,e.g.,when the discharge capacity reduced to 60% of maximum discharge capacity,the charge/discharge cycles increased from 66（as-cast） to 89（annealed at 800℃） and 127 times（annealed at 900℃）.La 1.6 Ti 0.4 MgNi 9 alloy annealed at 900℃ exhibited better electrochemical properties compared to the other two alloy electrodes.展开更多
The melt spinning（MS） and ball milling（BM） technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologi...The melt spinning（MS） and ball milling（BM） technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologies, viz. melt spinning and ball milling, were employed to fabricate the SmMg_（11）Ni alloy. The structure and hydrogen storage performance of these two kinds of alloys were researched in detail. The results reveal that the as-spun and milled alloys both contain nanocrystalline and amorphous structures. By means of the measurement of PCT curves, the thermodynamic parameters of the alloys prepared by MS and BM are ΔN_（Ms）（des） = 82.51 kJ/mol and ΔH_（BM）（des） = 81.68 kJ/mol, respectively, viz.ΔH_（MS）（des） 〉 ΔH_（BM）（des）. The as-milled alloy shows a larger hydrogen absorption capacity as compared with the as-spun one. The as-milled alloy exhibits lower onset hydrogen desorption temperature than the as-spun one. As to the as-milled and spun alloys, the onset hydrogen desorption temperatures are557.6 and 565.3 K, respectively. Additionally, the as-milled alloy shows a superior hydrogen desorption property than the as-spun one. On the basis of time that required by desorbing hydrogen of 3 wt% H_2, the as-milled alloy needs 1488.574,390 and 192 s corresponding to hydrogen desorption temperatures 593,613,633 and 653 K, while the as-spun alloy needs 3600,1020,778 and 306 s corresponding to the same temperatures. The dehydrogenation activation energies of the as-milled and spun alloys are 100.31 and105.56 kJ/mol, respectively, the difference of which is responsible for the much faster dehydriding rate of the as-milled alloy.展开更多
LaFeO3 was used to improve the hydrogen storage properties of Mg H2. The Mg H2＋20 wt.%La Fe O3 composite was prepared by ball milling method. The composite could absorb 3.417 wt.% of hydrogen within 21 min at 423 K w...LaFeO3 was used to improve the hydrogen storage properties of Mg H2. The Mg H2＋20 wt.%La Fe O3 composite was prepared by ball milling method. The composite could absorb 3.417 wt.% of hydrogen within 21 min at 423 K while Mg H2 only uptaked 0.977 wt.% hydrogen under the same conditions. The composite also released 3.894 wt.% of hydrogen at 623 K, which was almost twice more than Mg H2. The TPD measurement showed that the onset dissociation temperature of the composite was 570 K, 80 K lower than the Mg H2. Based on the Kissinger plot analysis of the composite, the activation energy E des was estimated to be 86.69 k J/mol, which was 36 k J/mol lower than Mg H2. The XRD and SEM results demonstrated that highly dispersed La Fe O3 could be presented in Mg H2, benefiting the reduction of particle size and also acting as an inhibitor to keep the particles from clustering during the ball-milled process.展开更多
文摘The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.
文摘A sort of rare earth Mg-based system hydrogen storage alloys with AB3-type was prepared by double-roller rapid quenching method. The alloys were nanocrystalline multi-phase structures composed of LaNi3 phase and LaNi5 phase by X-ray diffraction and scanning electron microscopy analyses, and the suitable absorption/desorption plateau was revealed by the measurement of P-C-I curve. Electrochemical studies indicate that the alloys exhibit good electrochemical properties such as high capacity and stable cycle life, and the discharge capacity is 369 mAh·g-1 at 0.2 C (72 mA·g-1). after 460 cycles, the capacity decay was only 19.4% at 2 C (720 mA·g-1).
文摘The rare earth based hydrogen storage alloys Ml_ 0.7Mm_ 0.3(Ni_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3) were chosen as objects of investigation in this paper. The effects of particle size on electrochemical properties of the alloy were investigated. The results indicate that the alloy with particle size of 100 and 150 mesh shows good activation behavior and high discharge capacity (the first discharge capacity and the maximum discharge capacity), but poor cycling stability, low capacity retention and high discharge capacity rate. The Ml_ 0.7Mm_ 0.3(Ni_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3) alloy with particle size of 150 mesh shows excellent electrochemical properties.
文摘The rare earth based hydrogen storage alloys Mm_xMl_ 1-xNi_ 3.55Co_ 0.75Mn_ 0.4Al_ 0.3(x=0～0.50) were investigated in this work. The influences of phase structure on the PCT characteristics were analyzed by means of electrochemical measurements. The results indicate that there is a strict relationship between crystal volume and PCT characteristics.
基金Project supported by National Natural Science Foundation of China (50861003, 51071054)the Natural Science Foundation of Guangxi (2010GXNSFD013004, 2011GXNSFA018034)
文摘The La0.55Pr0.05Nd0.15Mg0.25Ni3.5（Co0.5Al0.5）x（x=0.0, 0.1, 0.3, 0.5） alloys were prepared by magnetic levitation melting under an Ar atmosphere, and the effects of Co and Al on the hydrogen storage and electrochemical properties were systematically investigated by pressure composition isotherms, cyclic voltammetry, Tafel polarization and electrochemical impedance spectroscopy testing. The results showed that the alloy phases were mainly consisted of （La,Pr）（Ni,Co）5, LaMg2Ni9, （La,Nd）2Ni7 and LaNi3 phases, and the cell volumes of （La,Pr）（Ni,Co）5, LaMg2Ni9, （La,Nd）2Ni7 and LaNi3 phases expanded with Co and Al element added. The hydrogen storage capacity initially increased from 1.36 （x=0） to 1.47 wt.% （x=0.3） and then decreased to 1.22 wt.% （x=0.5）. The discharge capacity retention and cycle stability of the alloy electrodes were improved with the increase of Co and Al contents. The La0.55Pr0.05Nd0.15Mg0.25Ni3.5（Co0.5Al0.5）0.3 alloy electrode possessed better electrochemical kinetic characteristic.
基金supported by National Natural Science Foundation of China (50861003,51071054)Natural Science Foundation of Guangxi(2010GXNSFD013004,2012GXNSFBA053149)+1 种基金the Foundation of Key Laboratory of National Education Ministry for Nonferrous Metals and Materials Processing Technology (GXKFJ09-15)the Guangxi University Program for Science and Technology Research (XBZ110379)
文摘The present study dealt with investigations on the effects of annealing on the hydrogen storage properties of La 1.6 Ti 0.4 MgNi 9 alloys.The experimental alloys were prepared by magnetic levitation melting followed by annealing treatment.For La 1.6 Ti 0.4 MgNi 9 alloys,LaNi 5,LaNi 3 and LaMg 2 Ni 9 were the main phases,Ti 2 Ni phase appeared at 900℃.Annealing not only enhanced the maximum and effective hydrogen storage capacity,improved the hydrogen absorption/desorption kinetics,but also increased the discharge capacity.The cyclic stability had been improved markedly by annealing,e.g.,when the discharge capacity reduced to 60% of maximum discharge capacity,the charge/discharge cycles increased from 66（as-cast） to 89（annealed at 800℃） and 127 times（annealed at 900℃）.La 1.6 Ti 0.4 MgNi 9 alloy annealed at 900℃ exhibited better electrochemical properties compared to the other two alloy electrodes.
基金Project supported by the National Natural Science Foundations of China(51761032,51371094 and 51471054)Natural Science Foundation of Inner Mongolia,China(2015MS0558)
文摘The melt spinning（MS） and ball milling（BM） technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologies, viz. melt spinning and ball milling, were employed to fabricate the SmMg_（11）Ni alloy. The structure and hydrogen storage performance of these two kinds of alloys were researched in detail. The results reveal that the as-spun and milled alloys both contain nanocrystalline and amorphous structures. By means of the measurement of PCT curves, the thermodynamic parameters of the alloys prepared by MS and BM are ΔN_（Ms）（des） = 82.51 kJ/mol and ΔH_（BM）（des） = 81.68 kJ/mol, respectively, viz.ΔH_（MS）（des） 〉 ΔH_（BM）（des）. The as-milled alloy shows a larger hydrogen absorption capacity as compared with the as-spun one. The as-milled alloy exhibits lower onset hydrogen desorption temperature than the as-spun one. As to the as-milled and spun alloys, the onset hydrogen desorption temperatures are557.6 and 565.3 K, respectively. Additionally, the as-milled alloy shows a superior hydrogen desorption property than the as-spun one. On the basis of time that required by desorbing hydrogen of 3 wt% H_2, the as-milled alloy needs 1488.574,390 and 192 s corresponding to hydrogen desorption temperatures 593,613,633 and 653 K, while the as-spun alloy needs 3600,1020,778 and 306 s corresponding to the same temperatures. The dehydrogenation activation energies of the as-milled and spun alloys are 100.31 and105.56 kJ/mol, respectively, the difference of which is responsible for the much faster dehydriding rate of the as-milled alloy.
基金Project supported by National Natural Science Foundation of China(21376261,50971112,51001043,21173270)Natural Science Foundation of Hebei Province(E2010001170)Scientific Research Foundation for Returned Overseas Chinese Scholars of Hebei Province(20100501)
文摘LaFeO3 was used to improve the hydrogen storage properties of Mg H2. The Mg H2＋20 wt.%La Fe O3 composite was prepared by ball milling method. The composite could absorb 3.417 wt.% of hydrogen within 21 min at 423 K while Mg H2 only uptaked 0.977 wt.% hydrogen under the same conditions. The composite also released 3.894 wt.% of hydrogen at 623 K, which was almost twice more than Mg H2. The TPD measurement showed that the onset dissociation temperature of the composite was 570 K, 80 K lower than the Mg H2. Based on the Kissinger plot analysis of the composite, the activation energy E des was estimated to be 86.69 k J/mol, which was 36 k J/mol lower than Mg H2. The XRD and SEM results demonstrated that highly dispersed La Fe O3 could be presented in Mg H2, benefiting the reduction of particle size and also acting as an inhibitor to keep the particles from clustering during the ball-milled process.
