The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile con...The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.展开更多
The efficient pyrolysis and conversion of organic matter in organic-rich shale,as well as the effective recovery of pyrolysis shale oil and gas,play a vital role in alleviating energy pressure.The state of carbon diox...The efficient pyrolysis and conversion of organic matter in organic-rich shale,as well as the effective recovery of pyrolysis shale oil and gas,play a vital role in alleviating energy pressure.The state of carbon dioxide(CO_(2))in the pyrolysis environment of shale reservoirs is the supercritical state.Its unique supercritical fluid properties not only effectively heat organic matter,displace pyrolysis products and change shale pore structure,but also achieve carbon storage to a certain extent.Shale samples were made into powder and three sizes of cores,and nitrogen(N_(2))and supercritical carbon dioxide(ScCO_(2))pyrolysis experiments were performed at different final pyrolysis temperatures.The properties and mineral characteristics of the pyrolysis products were studied based on gas chromatography analysis,Xray diffraction tests,and mass spectrometry analysis.Besides,the pore structure characteristics at different regions of cores before and after pyrolysis were analyzed using N_(2) adsorption tests to clarify the impact of fracturing degree on the pyrolysis effect.The results indicate that the optimal pyrolysis temperature of Longkou shale is about 430℃.Compared with N_(2),the oil yield of ScCO_(2) pyrolysis is higher.The pyrolysis oil obtained by ScCO_(2) extraction has more intermediate fractions and higher relative molecular weight.The ScCO_(2) can effectively improve the pore diameter of shale and its effect is better than that of N_(2).The micropores are produced in shale after pyrolysis,and the macropores only are generated in ScCO_(2) pyrolysis environments with temperatures greater than 430℃.The pore structure has different development characteristics at different pyrolysis temperatures,which are mainly affected by the pressure holding of volatile matter and products blocking.Compared to the surface of the core,the pore development effect inside the core is better.With the decrease in core size,the pore diameter,specific surface area,and pore volume of cores all increase after pyrolysis.展开更多
Coal pyrolysis integrated with dry reforming of low-carbon alkane(CP-DRA)is an effective way to improve tar yield.Ni/La_(2)O_(3)-ZrO_(2) with a La/Zr ratio of 4 was a good catalyst for DRA to inhibit carbon deposition...Coal pyrolysis integrated with dry reforming of low-carbon alkane(CP-DRA)is an effective way to improve tar yield.Ni/La_(2)O_(3)-ZrO_(2) with a La/Zr ratio of 4 was a good catalyst for DRA to inhibit carbon deposition and obtain high tar yield in CP-DRA.In this study,the fraction distribution and component of tars from CP-DRA and coal pyrolysis in N_(2) atmosphere(CP-N_(2))were characterized by using several methods to understand the effect of DRA on coal pyrolysis.The isotope trace method was also used to discuss the role of low-carbon alkane in CP-DRA.The results showed that the tar from CP-N_(2)is mainly composed of aliphatic compounds with more C_(al),H_(al) and CH+CH_(2),and the tar from CP-DRA contains more Car,Har,and CH_(3),and has lower weight-average molecular weight and more light tar content than CP-N_(2).A small amount of C_(2)H_(6) addition in CP-DRA will raise the ratio of H_(β) and CH+CH_(2).Electron paramagnetic resonance(EPR)analysis shows that the tar from CP-DRA has a higher radical concentration while the corresponding char has a lower radical concentration.The isotope trace experiment showed that alkanes provide·H,·CH_(3),etc.to stabilize the radicals from coal pyrolysis and result in more alkyl aromatic compounds during CP-DRA.展开更多
A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepar...A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, X-ray fluorescence （XRF） and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNil/3Mnl/3C01/302 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNii/3Mnl/3C01/302. The specific discharge capacity retention of the carbon-coated LiNi1/3Mnt/3Col/30z reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.展开更多
Nitrogen doping is a promising method for the preparation of functional carbon materials.In this study,a nitrogen-doped porous coral biochar was prepared by using bamboo as raw material,urea as nitrogen source,and KHC...Nitrogen doping is a promising method for the preparation of functional carbon materials.In this study,a nitrogen-doped porous coral biochar was prepared by using bamboo as raw material,urea as nitrogen source,and KHCO3 as green activator through in-situ pyrolysis.The structure of the obtained biochar was characterized by various techniques including nitrogen adsorption and desorption,Raman spectroscopy,X-ray photoelectron spectrometer,and etc.The adsorption properties of nitrogen-doped biochar were evaluated with phenol and methylene blue probes.The results showed that the nitrogen source ratio had a significant effect on the evolution of pore structure of biochar.Low urea addition ratio was beneficial to the development of pore structures.The optimum specific surface area of nitrogen-doped biochar could be up to 1693 m^2·g^-1.Nitrogen doping can effectively improve the adsorption capacity of biochar to phenol and methylene blue.Biochar prepared at 973.15 K with low urea addition ratio exhibited the highest adsorption capacity for phenol and methylene blue,and the equilibrium adsorption capacity was 169.0 mg·g^-1 and 499.3 mg·g^-1,respectively.By comparing the adsorption capacity of various adsorbents in related fields,it is proved that the nitrogen-doped biochar prepared in this study has a good adsorption effect.展开更多
Bamboo sawdust was used as the precursor for the multipurpose use of waste. Offgases released during the activation process of bamboo by KOH were investigated quantitatively and qualitatively by a gas analyzer. TG/DTG...Bamboo sawdust was used as the precursor for the multipurpose use of waste. Offgases released during the activation process of bamboo by KOH were investigated quantitatively and qualitatively by a gas analyzer. TG/DTG curves during the pyrolysis process with different impregnation weight ratios （KOH to bamboo） were obtained by a thermogravimetric analyzer. Pyrolysis mechanism of bamboo was proposed. The results showed that the offgases were composed of CO, NO, SO2 and hydrocarbon with the concentration of 1 372, 37, 86, 215 mg/L, respectively. Thermogravimetric analysis indicated that the pyrolytic process mainly experienced two steps. The first was the low temperature activation step （lower than 300 ℃）, which was the pre-activation and induction period. The second was the high temperature activation step（higher than 550 ℃）, which was a radial activation followed by pore production. The second process was the key to control the pore distribution of the final product.展开更多
Developing high-performance non-precious metal electrocatalysts for oxygen reduction reaction(ORR)is crucial for the commercialization of fuel cells and metal-air batteries.However,doped carbon-based materials only sh...Developing high-performance non-precious metal electrocatalysts for oxygen reduction reaction(ORR)is crucial for the commercialization of fuel cells and metal-air batteries.However,doped carbon-based materials only show good ORR activity in alkaline medium,and become less effective in acidic environment.We believe that an appropriate combination of both ionic and electronic transport path,and well dopant distribution of doped carbon-based materials would help to realize high ORR performance un-der both acidic and alkaline cond让ions.Accordingly,a nitrogen and sulfur co-doped carbon framework with hierarchical through-hole structure is fabricated by morphology-controlled solid-state pyrolysis of poly(aniline-co-2-ami no thiophenol)foam.The uniform high concentrations of nitrogen and sulfur,high intrinsic conductivity,and integrated three dimensional ionic and electronic transfer passageways of the 3D porous structure lead to synergistic effects in catalyzing ORR.As a result,the limiting current density of the carbonized poly(aniline-co-2-aminothiophenol)foam is equivalent to commercial Pt/C in acidic environment,and twice the latter in alkaline medium.展开更多
Based on the experiments, the standard enthalpy△H■of the possible pyrolysis reactions of the carbon matrix precursor toluene was investigated by means of DFT method UB3LYP/ 3-21G *(based on semi-empirical method UA...Based on the experiments, the standard enthalpy△H■of the possible pyrolysis reactions of the carbon matrix precursor toluene was investigated by means of DFT method UB3LYP/ 3-21G *(based on semi-empirical method UAM1 and ab initio method UHF/3-21G*). The com- putation results with UB3LYP/3-21G* coincide with the experimental values well. Then, the mechanism for all types of the pyrolysis reactions of toluene was studied by UB3LYP/3-21G * The geometries of the reactant and the product radicals were optimized, meanwhile, the standard thermodynamic parameters of the pyrolysis reaction at different temperatures (298, 773, 843, 963 and 1 073 K) were calculated. The thermodynamic computation result shows that when the pyrolysis temperature of toluene is lower than 963 K, the reaction path supported by thermody- namics is that the C-H bond of the methyl on the benzene ring breaks and bitoluene form, while the temperature increases (about 1 073 K), the thermodynamic calculation result turns to support the reaction path producing phenyl radicals and methyl radicals. This mechanism is in accord with the experiments.展开更多
The autothermic pyrolysis in-situ conversion process (ATS) consumes latent heat of residual organic matter after kerogen pyrolysis by oxidation reaction, and it has the advantages of low development cost and exploitat...The autothermic pyrolysis in-situ conversion process (ATS) consumes latent heat of residual organic matter after kerogen pyrolysis by oxidation reaction, and it has the advantages of low development cost and exploitation of deep oil shale resources. However, the heating mechanism and the characteristic of different reaction zones are still unclear. In this study, an ATS numerical simulation model was proposed for the development of oil shale, which considers the pyrolysis of kerogen, high-temperature oxidation, and low-temperature oxidation. Based on the above model, the mechanism of the ATS was analyzed and the effects of preheating temperature, O_(2) content, and injection rate on recovery factor and energy efficiency were studied. The results showed that the ATS in the formation can be divided into five characteristic zones by evolution of the oil and O_(2) distribution, and the solid organic matter, including residue zone, autothermic zone, pyrolysis zone, preheating zone, and original zone. Energy efficiency was much higher for the ATS than for the high-temperature nitrogen injection in-situ conversion process (HNICP). There is a threshold value of the preheating temperature, the oil content, and the injection rate during the ATS, which is 400 °C, 0.18, and 1100 m3/day, respectively, in this study.展开更多
In the present paper, multi-walled carbon nanotubes（MWCNTs） are successfully assembled on graphite felt（GF） using sucrose pyrolysis method for the first time. The in situ formed pyrolytic carbon is chosen as the b...In the present paper, multi-walled carbon nanotubes（MWCNTs） are successfully assembled on graphite felt（GF） using sucrose pyrolysis method for the first time. The in situ formed pyrolytic carbon is chosen as the binder because it is essentially carbon materials as well as CNTs and GF which has a natural tendency to achieve high bonding strength and low contact resistance. The MWCNTs/GF electrode is demonstrated to increase surface area, reduce polarization, lower charge transfer resistance and improve energy conversion efficiency comparing with GF. This excellent electrochemical performance is mainly ascribed to the high electro-catalytic activity of MWCNTs and increasing surface area.展开更多
CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbo...CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbon structure on the compressive strength of CCCP was investigated in a pyrolysis furnace(350-750℃).The results showed that as the roasting temperature increased,the compressive strength also increased and furthermore,structural defects and imperfections in the carbon crystallites were gradually eliminated to form more organized char structures,thus forming high-ordered CC.Notably,the CCCP preheated at 750℃exhibited the highest compressive strength.A positive relationship between the compressive strength and pore-size homogeneity was established.A linear relationship between the com-pressive strength of the CCCP and the average stack height of CC was observed.Additionally,a four-stage caking mechanism was developed.展开更多
Carbon deposits were formed on the reactor wall during plasma pyrolysis of the Xinjiang candle coal in our V-style plasma pyrolysis pilot-plant. The carbon deposits were studied using a scanning electronic microscope ...Carbon deposits were formed on the reactor wall during plasma pyrolysis of the Xinjiang candle coal in our V-style plasma pyrolysis pilot-plant. The carbon deposits were studied using a scanning electronic microscope （SEM） and the X-ray diffraction （XRD） method. It was found that carbon deposits located at different parts in the reactor exhibited different microscopic patterns. The formation mechanism of the carbon deposits was deduced. The downward increase in the graphitization degree of the carbon deposits was found and interpreted.展开更多
Laboratory modeling of in-situ combustion is crucial for understanding the potential success of field trials in thermal enhanced oil recovery(EOR) and is a vital precursor to scaling the technology for field applicati...Laboratory modeling of in-situ combustion is crucial for understanding the potential success of field trials in thermal enhanced oil recovery(EOR) and is a vital precursor to scaling the technology for field applications. The high combustion temperatures, reaching up to 480℃, induce significant petrophysical alterations of the rock, an often overlooked aspect in thermal EOR projects. Quantifying these changes is essential for potentially repurposing thermally treated, depleted reservoirs for CO_(2) storage.In this study, we depart from conventional combustion experiments that use crushed core, opting instead to analyze the thermal effects on reservoir properties of carbonate rocks using consolidated samples. This technique maintains the intrinsic porosity and permeability, revealing combustion's impact on porosity and mineralogical alterations, with a comparative analysis of these properties pre-and post-combustion. We characterize porosity and pore geometry evolution using low-field nuclear magnetic resonance, X-ray micro-computed tomography, and low-temperature nitrogen adsorption. Mineral composition of the rock and grain-pore scale alterations are analyzed by scanning electron microscopy and X-ray diffraction.The analysis shows a significant increase in carbonate rocks' porosity, pore size and mineral alterations, and a transition from mixed-wet to a strongly water-wet state. Total porosity of rock samples increased in average for 15%-20%, and formation of new pores is registered at the scale of 1-30 μm size.High-temperature exposure results in the calcite and dolomite decomposition, calcite dissolution and formation of new minerals—anhydrite and fluorite. Increased microporosity and the shift to strongly water-wet rock state improve the prospects for capillary and residual CO_(2) trapping with greater capacity.Consequently, these findings highlight the importance of laboratory in-situ combustion modeling on consolidated rock over tests that use crushed core, and indicate that depleted combustion stimulated reservoirs may prove to be viable candidates for CO_(2) storage.展开更多
A binder-free Ir-dispersed ordered mesoporous carbon（Ir-OMC） catalytic electrode has been prepared through a designed in-situ carbonization method, which involves coating resorcinol and formaldehyde mixtures with ir...A binder-free Ir-dispersed ordered mesoporous carbon（Ir-OMC） catalytic electrode has been prepared through a designed in-situ carbonization method, which involves coating resorcinol and formaldehyde mixtures with iridium precursors onto the three-dimensional nickel foam framework, followed by insitu calcination in Natmosphere at 800 ℃ for 3 h. This electrode shows a large surface area, ordered mesoporous structure and homogeneous distribution of metal nanoparticles. It presents good activity and stability towards hydrogen evolution reaction, which is attributed to the efficient mass and electron transport from the intimate contact among Ir nanoparticles, ordered mesoporous carbon matrix and 3 D conductive substrate. We hope that this in-situ carbonization synthetic route can also be applied to design more high-performance catalysts for water splitting, fuel cells and other clean energy devices.展开更多
The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-...The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-obtained porous carbon nanorods can reach up to 1448 m^(2) g^(−1) without the addition of any activating agent.As the capacitive electrode,WPCNs possess the extraordinary compatibility to capacitance,different electrolyte systems as well as long-term cycle life even at a commercial-level areal mass loading(10 mg cm^(−2)).Besides,only an extremely small capacitance fluctuation is observed under the extreme circumstance(−40 to 80℃),reflecting the excellent high-and low-temperature performance.The relationship between the pore structure and capacitive behavior is analyzed by comparing WPCNs with mesopores-dominated asphalt-derived porous carbon nanorods(APCNs)and micropores-dominated activated carbon.The molecular dynamics simulation further reveals the ion diffusion and transfer ability of the as-prepared carbon materials under different pore size distribution.The total ion flow(NT)of WPCNs calculated by the simulation is obviously larger than APCNs and the N_(T) ratio between them is similar with the experimental average capacitance ratio.Furthermore,this work also provides a valuable strategy to prepare the electrode material with high capacitive energy storage ability through the high value-added utilization of WTPO.展开更多
Pyrolysis is a rapidly expanding chemical-based recyclable method that complements physical recycling. It avoids improper disposal of post-consumer polymers and mitigates the ecological problems linked to the producti...Pyrolysis is a rapidly expanding chemical-based recyclable method that complements physical recycling. It avoids improper disposal of post-consumer polymers and mitigates the ecological problems linked to the production of new plastic. Nevertheless, while there is a consensus that pyrolysis might be a crucial technology in the years to come, more discussions are needed to address the challenges related to scaling up, the long-term sustainability of the process, and additional variables essential to the advancement of the green economy. Herein, it emphasizes knowledge gaps and methodological issues in current Life Cycle Assessment (LCA), underlining the need for standardized techniques and updated data to support robust decision-making for adopting pyrolysis technologies in waste management strategies. For this purpose, this study reviews the LCAs of pyrolytic processes, encompassing the complete life cycle, from feedstock collection to end-product distribution, including elements such as energy consumption, greenhouse gas emissions, and waste creation. Hence, we evaluate diverse pyrolysis processes, including slow, rapid, and catalytic pyrolysis, emphasizing their distinct efficiency and environmental footprints. Furthermore, we evaluate the impact of feedstock composition, process parameters, and scale of operation on the overall sustainability of pyrolysis-based plastic waste treatment by integrating results from current literature and identifying essential research needs. Therefore, this paper argues that existing LCA studies need more coherence and accuracy. It follows a thorough evaluation of previous research and suggests new insights into methodologies and restrictions.展开更多
The main chemical composition of pyrolysis carbon black of waste tires is C,O,Cu,Zn and so on.The content of ash and fine powder in pyrolysis carbon black is high,and the 300%elongation stress is high.The difference b...The main chemical composition of pyrolysis carbon black of waste tires is C,O,Cu,Zn and so on.The content of ash and fine powder in pyrolysis carbon black is high,and the 300%elongation stress is high.The difference between pyrolysis carbon black and furnace black N326,which is commonly used in rubber,is obvious compared with chemical property.The pyrolysis carbon black was used to replace furnace black N326 in the transition layer of all steel load Radial tire rubber through experimental study.It was found that the compression heat generation and dynamic loss(Tanδ)of the blend rubber before and after aging were obviously reduced,the elongation at break and resilience increased,while the tensile stress and tear strength decreased by 100%and 300%,but the hardness and tensile strength changed little before and after aging.According to the latest raw material price calculation,15 used tire pyrolysis carbon black instead of furnace carbon black N326 used in all steel Radial tire transition layer rubber application,excluding labor costs,electricity and equipment depreciation,a ton of blended rubber saves about$22.86 in production costs.展开更多
The anaerobic digestion of aqueous condensate from fast pyrolysis is a promising technology for enhancing carbon and energy recovery from waste.Syngas,another pyrolysis product,could be integrated as a co-substrate to...The anaerobic digestion of aqueous condensate from fast pyrolysis is a promising technology for enhancing carbon and energy recovery from waste.Syngas,another pyrolysis product,could be integrated as a co-substrate to improve process efficiency.However,limited knowledge exists on the co-fermentation of pyrolysis syngas and aqueous condensate by anaerobic cultures and the effects of substrate toxicity.This work investigates the ability of mesophilic and thermophilic anaerobic mixed cultures to co-ferment syngas and the aqueous condensate from either sewage sludge or polyethylene plastics pyrolysis in semi-batch bottle fermentations.It identifies inhibitory concentrations for carboxydotrophic and methanogenic reactions,examines specific component removal and assesses energy recovery potential.The results show successful co-fermentation of syngas and aqueous condensate components like phenols and N-heterocycles.However,the characteristics and load of the aqueous condensates affected process performance and product formation.The toxicity,likely resulting from the synergistic effect of multiple toxicants,depended on the PACs’composition.At 37°C,concentrations of 15.6 gCOD/gVSS and 7.8 gCOD/gVSS of sewage sludge-derived aqueous condensate inhibited by 50%carboxydotrophic and methanogenic activity,respectively.At 55°C,loads between 3.9 and 6.8 gCOD/gVSS inhibited by 50%both reactions.Polyethylene plastics condensate showed higher toxicity,with 2.8 gCOD/gVSS and 0.3 gCOD/gVSS at 37°C decreasing carboxydotrophic and methanogenic rates by 50%.At 55°C,0.3 gCOD/gVSS inhibited by 50%CO uptake rates and methanogenesis.Increasing PAC loads reduced methane production and promoted short-chain carboxylates formation.The recalcitrant components in sewage sludge condensate hindered e-mol recovery,while plastics condensate showed high e-mol recoveries despite the stronger toxicity.Even with challenges posed by substrate toxicity and composition variations,the successful conversion of syngas and aqueous condensates highlights the potential of this technology in advancing carbon and energy recovery from anthropogenic waste streams.展开更多
In order to increase the understanding of the pyrolysis mechanism, Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry-mass spectrometric coupling technique (TG-MS) were used to study the pyrolysis be...In order to increase the understanding of the pyrolysis mechanism, Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry-mass spectrometric coupling technique (TG-MS) were used to study the pyrolysis behavior of furfural-acetone resin used for new carbon materials. The curing and carbonization mechanisms of furfural-acetone resin were mainly investigated; structural changes and volatile products evolved during pyrolysis were analyzed. The results indicate that, during pyrolysis of furfural-acetone resin adding 7% (mass fraction) phosphorous acid as curing agent, the rupture of C—O bond in the five-membered heterocycle firstly takes place to release oxygen atoms and then does the C—H bond, which enable the molecular chain to cross-link and condense, then lead to the formation of three dimensional networking structure. With the increase of pyrolyzing temperature, the scission of methyl and the opening of furan ring are generated. As a result, the recomposition of molecular chain structure is generated and a hexatomic fused ring containing double bonds is built. The main volatile products during pyrolysis of furfural- acetone resin are H2O, and a small mount of CO, CO2 and CH4. At elevated temperatures, dehydrogenation takes place and hydrogen gas is evolved.展开更多
In the present work, novolac phenolic resin-based composites reinforced with short discrete carbon fibers were pyrolized at different temperatures from 400℃ to 900℃. Their physical and chemical properties were studi...In the present work, novolac phenolic resin-based composites reinforced with short discrete carbon fibers were pyrolized at different temperatures from 400℃ to 900℃. Their physical and chemical properties were studied, linterfacial bonding between the matrix and carbon fiber and its influence on mechanical properties of analyzed composites were analyzed. Experimental results demonstrated strengthening of interfacial bonding with increase of pyrolysis temperature. Evolution of failure behavior was observed.展开更多
基金the National Key R&D Program of China(No.2022YFE0208100)the National Natural Science Foundation of China(No.5274316)+1 种基金the Key Research and Development Plan of Anhui Province,China(No.202210700037)the Major Science and Technology Project of Xinjiang Uygur Autonomous Region,China(No.2022A01003).
文摘The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.
基金supported by the National Natural Science Foundation of China (Nos.U22B6004,51974341)State Key Laboratory of Deep Oil and Gas (No.SKLDOG2024-ZYTS-14)the Fundamental Research Funds for the Central Universities (No.20CX06070A)。
文摘The efficient pyrolysis and conversion of organic matter in organic-rich shale,as well as the effective recovery of pyrolysis shale oil and gas,play a vital role in alleviating energy pressure.The state of carbon dioxide(CO_(2))in the pyrolysis environment of shale reservoirs is the supercritical state.Its unique supercritical fluid properties not only effectively heat organic matter,displace pyrolysis products and change shale pore structure,but also achieve carbon storage to a certain extent.Shale samples were made into powder and three sizes of cores,and nitrogen(N_(2))and supercritical carbon dioxide(ScCO_(2))pyrolysis experiments were performed at different final pyrolysis temperatures.The properties and mineral characteristics of the pyrolysis products were studied based on gas chromatography analysis,Xray diffraction tests,and mass spectrometry analysis.Besides,the pore structure characteristics at different regions of cores before and after pyrolysis were analyzed using N_(2) adsorption tests to clarify the impact of fracturing degree on the pyrolysis effect.The results indicate that the optimal pyrolysis temperature of Longkou shale is about 430℃.Compared with N_(2),the oil yield of ScCO_(2) pyrolysis is higher.The pyrolysis oil obtained by ScCO_(2) extraction has more intermediate fractions and higher relative molecular weight.The ScCO_(2) can effectively improve the pore diameter of shale and its effect is better than that of N_(2).The micropores are produced in shale after pyrolysis,and the macropores only are generated in ScCO_(2) pyrolysis environments with temperatures greater than 430℃.The pore structure has different development characteristics at different pyrolysis temperatures,which are mainly affected by the pressure holding of volatile matter and products blocking.Compared to the surface of the core,the pore development effect inside the core is better.With the decrease in core size,the pore diameter,specific surface area,and pore volume of cores all increase after pyrolysis.
基金supported by the National Natural Science Foundation of China(21576046)the Innovation Team Support Program in Key Areas of the Dalian Science and Technology Bureau(2019RT10).
文摘Coal pyrolysis integrated with dry reforming of low-carbon alkane(CP-DRA)is an effective way to improve tar yield.Ni/La_(2)O_(3)-ZrO_(2) with a La/Zr ratio of 4 was a good catalyst for DRA to inhibit carbon deposition and obtain high tar yield in CP-DRA.In this study,the fraction distribution and component of tars from CP-DRA and coal pyrolysis in N_(2) atmosphere(CP-N_(2))were characterized by using several methods to understand the effect of DRA on coal pyrolysis.The isotope trace method was also used to discuss the role of low-carbon alkane in CP-DRA.The results showed that the tar from CP-N_(2)is mainly composed of aliphatic compounds with more C_(al),H_(al) and CH+CH_(2),and the tar from CP-DRA contains more Car,Har,and CH_(3),and has lower weight-average molecular weight and more light tar content than CP-N_(2).A small amount of C_(2)H_(6) addition in CP-DRA will raise the ratio of H_(β) and CH+CH_(2).Electron paramagnetic resonance(EPR)analysis shows that the tar from CP-DRA has a higher radical concentration while the corresponding char has a lower radical concentration.The isotope trace experiment showed that alkanes provide·H,·CH_(3),etc.to stabilize the radicals from coal pyrolysis and result in more alkyl aromatic compounds during CP-DRA.
基金Project(U1202272)supported by the National Natural Science Foundation of China
文摘A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, X-ray fluorescence （XRF） and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNil/3Mnl/3C01/302 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNii/3Mnl/3C01/302. The specific discharge capacity retention of the carbon-coated LiNi1/3Mnt/3Col/30z reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.
基金supported by the Innovative Research Groups of the National Natural Science Foundation of China(51621005)China Postdoctoral Science Foundation(2019M652080)。
文摘Nitrogen doping is a promising method for the preparation of functional carbon materials.In this study,a nitrogen-doped porous coral biochar was prepared by using bamboo as raw material,urea as nitrogen source,and KHCO3 as green activator through in-situ pyrolysis.The structure of the obtained biochar was characterized by various techniques including nitrogen adsorption and desorption,Raman spectroscopy,X-ray photoelectron spectrometer,and etc.The adsorption properties of nitrogen-doped biochar were evaluated with phenol and methylene blue probes.The results showed that the nitrogen source ratio had a significant effect on the evolution of pore structure of biochar.Low urea addition ratio was beneficial to the development of pore structures.The optimum specific surface area of nitrogen-doped biochar could be up to 1693 m^2·g^-1.Nitrogen doping can effectively improve the adsorption capacity of biochar to phenol and methylene blue.Biochar prepared at 973.15 K with low urea addition ratio exhibited the highest adsorption capacity for phenol and methylene blue,and the equilibrium adsorption capacity was 169.0 mg·g^-1 and 499.3 mg·g^-1,respectively.By comparing the adsorption capacity of various adsorbents in related fields,it is proved that the nitrogen-doped biochar prepared in this study has a good adsorption effect.
基金Funded by the National Natural Science Foundation of China(No. 50802017)Medical Science Research Fund of GuangDong Province(No. B2009118)Teaching Staff Construction Fund of Guangdong Pharmaceutical University
文摘Bamboo sawdust was used as the precursor for the multipurpose use of waste. Offgases released during the activation process of bamboo by KOH were investigated quantitatively and qualitatively by a gas analyzer. TG/DTG curves during the pyrolysis process with different impregnation weight ratios （KOH to bamboo） were obtained by a thermogravimetric analyzer. Pyrolysis mechanism of bamboo was proposed. The results showed that the offgases were composed of CO, NO, SO2 and hydrocarbon with the concentration of 1 372, 37, 86, 215 mg/L, respectively. Thermogravimetric analysis indicated that the pyrolytic process mainly experienced two steps. The first was the low temperature activation step （lower than 300 ℃）, which was the pre-activation and induction period. The second was the high temperature activation step（higher than 550 ℃）, which was a radial activation followed by pore production. The second process was the key to control the pore distribution of the final product.
基金financial support by the National Natural Science Foundation of China (Grant: 51333008)Young Teacher Training Program of Sun Yat-sen University (Grant: 17lgpy86)
文摘Developing high-performance non-precious metal electrocatalysts for oxygen reduction reaction(ORR)is crucial for the commercialization of fuel cells and metal-air batteries.However,doped carbon-based materials only show good ORR activity in alkaline medium,and become less effective in acidic environment.We believe that an appropriate combination of both ionic and electronic transport path,and well dopant distribution of doped carbon-based materials would help to realize high ORR performance un-der both acidic and alkaline cond让ions.Accordingly,a nitrogen and sulfur co-doped carbon framework with hierarchical through-hole structure is fabricated by morphology-controlled solid-state pyrolysis of poly(aniline-co-2-ami no thiophenol)foam.The uniform high concentrations of nitrogen and sulfur,high intrinsic conductivity,and integrated three dimensional ionic and electronic transfer passageways of the 3D porous structure lead to synergistic effects in catalyzing ORR.As a result,the limiting current density of the carbonized poly(aniline-co-2-aminothiophenol)foam is equivalent to commercial Pt/C in acidic environment,and twice the latter in alkaline medium.
基金the Foundation of board of education of Shanxi province(99K1100).
文摘Based on the experiments, the standard enthalpy△H■of the possible pyrolysis reactions of the carbon matrix precursor toluene was investigated by means of DFT method UB3LYP/ 3-21G *(based on semi-empirical method UAM1 and ab initio method UHF/3-21G*). The com- putation results with UB3LYP/3-21G* coincide with the experimental values well. Then, the mechanism for all types of the pyrolysis reactions of toluene was studied by UB3LYP/3-21G * The geometries of the reactant and the product radicals were optimized, meanwhile, the standard thermodynamic parameters of the pyrolysis reaction at different temperatures (298, 773, 843, 963 and 1 073 K) were calculated. The thermodynamic computation result shows that when the pyrolysis temperature of toluene is lower than 963 K, the reaction path supported by thermody- namics is that the C-H bond of the methyl on the benzene ring breaks and bitoluene form, while the temperature increases (about 1 073 K), the thermodynamic calculation result turns to support the reaction path producing phenyl radicals and methyl radicals. This mechanism is in accord with the experiments.
基金financial support offered by the National Key R&D Program of China(Grant No.2019YFA0705502,Grant No.2019YFA0705501)the National Natural Science Fund Project of China(Grant No.4210020395)+1 种基金the China Postdoctoral Science Foundation(Grant No.2021M700053)Technology Development Plan Project of Jilin Province(Grant No.20200201219JC).
文摘The autothermic pyrolysis in-situ conversion process (ATS) consumes latent heat of residual organic matter after kerogen pyrolysis by oxidation reaction, and it has the advantages of low development cost and exploitation of deep oil shale resources. However, the heating mechanism and the characteristic of different reaction zones are still unclear. In this study, an ATS numerical simulation model was proposed for the development of oil shale, which considers the pyrolysis of kerogen, high-temperature oxidation, and low-temperature oxidation. Based on the above model, the mechanism of the ATS was analyzed and the effects of preheating temperature, O_(2) content, and injection rate on recovery factor and energy efficiency were studied. The results showed that the ATS in the formation can be divided into five characteristic zones by evolution of the oil and O_(2) distribution, and the solid organic matter, including residue zone, autothermic zone, pyrolysis zone, preheating zone, and original zone. Energy efficiency was much higher for the ATS than for the high-temperature nitrogen injection in-situ conversion process (HNICP). There is a threshold value of the preheating temperature, the oil content, and the injection rate during the ATS, which is 400 °C, 0.18, and 1100 m3/day, respectively, in this study.
基金financial support of the National Natural Science Foundation of China (project no. 51504231, 51504232, 51774262 and 21325628)Open Project of State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization (project no. CNMRCUKF1704)
文摘In the present paper, multi-walled carbon nanotubes（MWCNTs） are successfully assembled on graphite felt（GF） using sucrose pyrolysis method for the first time. The in situ formed pyrolytic carbon is chosen as the binder because it is essentially carbon materials as well as CNTs and GF which has a natural tendency to achieve high bonding strength and low contact resistance. The MWCNTs/GF electrode is demonstrated to increase surface area, reduce polarization, lower charge transfer resistance and improve energy conversion efficiency comparing with GF. This excellent electrochemical performance is mainly ascribed to the high electro-catalytic activity of MWCNTs and increasing surface area.
基金This work was financially supported by the National Key R&D Program of China(No.2018YFB0605900).
文摘CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbon structure on the compressive strength of CCCP was investigated in a pyrolysis furnace(350-750℃).The results showed that as the roasting temperature increased,the compressive strength also increased and furthermore,structural defects and imperfections in the carbon crystallites were gradually eliminated to form more organized char structures,thus forming high-ordered CC.Notably,the CCCP preheated at 750℃exhibited the highest compressive strength.A positive relationship between the compressive strength and pore-size homogeneity was established.A linear relationship between the com-pressive strength of the CCCP and the average stack height of CC was observed.Additionally,a four-stage caking mechanism was developed.
文摘Carbon deposits were formed on the reactor wall during plasma pyrolysis of the Xinjiang candle coal in our V-style plasma pyrolysis pilot-plant. The carbon deposits were studied using a scanning electronic microscope （SEM） and the X-ray diffraction （XRD） method. It was found that carbon deposits located at different parts in the reactor exhibited different microscopic patterns. The formation mechanism of the carbon deposits was deduced. The downward increase in the graphitization degree of the carbon deposits was found and interpreted.
基金supported by the Ministry of Science and Higher Education of the Russian Federation under agreement No.075-10-2022-011 within the framework of the development program for a world-class Research Center。
文摘Laboratory modeling of in-situ combustion is crucial for understanding the potential success of field trials in thermal enhanced oil recovery(EOR) and is a vital precursor to scaling the technology for field applications. The high combustion temperatures, reaching up to 480℃, induce significant petrophysical alterations of the rock, an often overlooked aspect in thermal EOR projects. Quantifying these changes is essential for potentially repurposing thermally treated, depleted reservoirs for CO_(2) storage.In this study, we depart from conventional combustion experiments that use crushed core, opting instead to analyze the thermal effects on reservoir properties of carbonate rocks using consolidated samples. This technique maintains the intrinsic porosity and permeability, revealing combustion's impact on porosity and mineralogical alterations, with a comparative analysis of these properties pre-and post-combustion. We characterize porosity and pore geometry evolution using low-field nuclear magnetic resonance, X-ray micro-computed tomography, and low-temperature nitrogen adsorption. Mineral composition of the rock and grain-pore scale alterations are analyzed by scanning electron microscopy and X-ray diffraction.The analysis shows a significant increase in carbonate rocks' porosity, pore size and mineral alterations, and a transition from mixed-wet to a strongly water-wet state. Total porosity of rock samples increased in average for 15%-20%, and formation of new pores is registered at the scale of 1-30 μm size.High-temperature exposure results in the calcite and dolomite decomposition, calcite dissolution and formation of new minerals—anhydrite and fluorite. Increased microporosity and the shift to strongly water-wet rock state improve the prospects for capillary and residual CO_(2) trapping with greater capacity.Consequently, these findings highlight the importance of laboratory in-situ combustion modeling on consolidated rock over tests that use crushed core, and indicate that depleted combustion stimulated reservoirs may prove to be viable candidates for CO_(2) storage.
基金support of the National Natural Science Foundation of China (21403218, 21476226, 21403029)Ministry of Science and Technology of the People’s Republic of China under contact of 2016YFA0202800+2 种基金the Youth Innovation Promotion Association of the CASthe Scientific Research Project of the Education Department of Liaoning Province (L2014022)the Fundamental Research Funds for the Central Universities (DUT15ZD225)
文摘A binder-free Ir-dispersed ordered mesoporous carbon（Ir-OMC） catalytic electrode has been prepared through a designed in-situ carbonization method, which involves coating resorcinol and formaldehyde mixtures with iridium precursors onto the three-dimensional nickel foam framework, followed by insitu calcination in Natmosphere at 800 ℃ for 3 h. This electrode shows a large surface area, ordered mesoporous structure and homogeneous distribution of metal nanoparticles. It presents good activity and stability towards hydrogen evolution reaction, which is attributed to the efficient mass and electron transport from the intimate contact among Ir nanoparticles, ordered mesoporous carbon matrix and 3 D conductive substrate. We hope that this in-situ carbonization synthetic route can also be applied to design more high-performance catalysts for water splitting, fuel cells and other clean energy devices.
基金supported by the National Key Research and Development Program of China(No.2018YFC1902603).
文摘The conversion of waste tire pyrolysis oil(WTPO)into S-doped porous carbon nanorods(labeled as WPCNs)with hierarchical pore structure is realized by a simple template-directed approach.The specific surface area of as-obtained porous carbon nanorods can reach up to 1448 m^(2) g^(−1) without the addition of any activating agent.As the capacitive electrode,WPCNs possess the extraordinary compatibility to capacitance,different electrolyte systems as well as long-term cycle life even at a commercial-level areal mass loading(10 mg cm^(−2)).Besides,only an extremely small capacitance fluctuation is observed under the extreme circumstance(−40 to 80℃),reflecting the excellent high-and low-temperature performance.The relationship between the pore structure and capacitive behavior is analyzed by comparing WPCNs with mesopores-dominated asphalt-derived porous carbon nanorods(APCNs)and micropores-dominated activated carbon.The molecular dynamics simulation further reveals the ion diffusion and transfer ability of the as-prepared carbon materials under different pore size distribution.The total ion flow(NT)of WPCNs calculated by the simulation is obviously larger than APCNs and the N_(T) ratio between them is similar with the experimental average capacitance ratio.Furthermore,this work also provides a valuable strategy to prepare the electrode material with high capacitive energy storage ability through the high value-added utilization of WTPO.
文摘Pyrolysis is a rapidly expanding chemical-based recyclable method that complements physical recycling. It avoids improper disposal of post-consumer polymers and mitigates the ecological problems linked to the production of new plastic. Nevertheless, while there is a consensus that pyrolysis might be a crucial technology in the years to come, more discussions are needed to address the challenges related to scaling up, the long-term sustainability of the process, and additional variables essential to the advancement of the green economy. Herein, it emphasizes knowledge gaps and methodological issues in current Life Cycle Assessment (LCA), underlining the need for standardized techniques and updated data to support robust decision-making for adopting pyrolysis technologies in waste management strategies. For this purpose, this study reviews the LCAs of pyrolytic processes, encompassing the complete life cycle, from feedstock collection to end-product distribution, including elements such as energy consumption, greenhouse gas emissions, and waste creation. Hence, we evaluate diverse pyrolysis processes, including slow, rapid, and catalytic pyrolysis, emphasizing their distinct efficiency and environmental footprints. Furthermore, we evaluate the impact of feedstock composition, process parameters, and scale of operation on the overall sustainability of pyrolysis-based plastic waste treatment by integrating results from current literature and identifying essential research needs. Therefore, this paper argues that existing LCA studies need more coherence and accuracy. It follows a thorough evaluation of previous research and suggests new insights into methodologies and restrictions.
文摘The main chemical composition of pyrolysis carbon black of waste tires is C,O,Cu,Zn and so on.The content of ash and fine powder in pyrolysis carbon black is high,and the 300%elongation stress is high.The difference between pyrolysis carbon black and furnace black N326,which is commonly used in rubber,is obvious compared with chemical property.The pyrolysis carbon black was used to replace furnace black N326 in the transition layer of all steel load Radial tire rubber through experimental study.It was found that the compression heat generation and dynamic loss(Tanδ)of the blend rubber before and after aging were obviously reduced,the elongation at break and resilience increased,while the tensile stress and tear strength decreased by 100%and 300%,but the hardness and tensile strength changed little before and after aging.According to the latest raw material price calculation,15 used tire pyrolysis carbon black instead of furnace carbon black N326 used in all steel Radial tire transition layer rubber application,excluding labor costs,electricity and equipment depreciation,a ton of blended rubber saves about$22.86 in production costs.
基金Open Access funding enabled and organized by Projekt DEALThe authors would like to thank the Helmholtz Research Program“Materials and Technologies for the Energy Transition(MTET),Topic 3:Chemical Energy Carriers”and the support from the KIT-Publication Fund of the Karlsruhe Institute of Technology.Open access funding enabled and organized by Projekt DEAL.
文摘The anaerobic digestion of aqueous condensate from fast pyrolysis is a promising technology for enhancing carbon and energy recovery from waste.Syngas,another pyrolysis product,could be integrated as a co-substrate to improve process efficiency.However,limited knowledge exists on the co-fermentation of pyrolysis syngas and aqueous condensate by anaerobic cultures and the effects of substrate toxicity.This work investigates the ability of mesophilic and thermophilic anaerobic mixed cultures to co-ferment syngas and the aqueous condensate from either sewage sludge or polyethylene plastics pyrolysis in semi-batch bottle fermentations.It identifies inhibitory concentrations for carboxydotrophic and methanogenic reactions,examines specific component removal and assesses energy recovery potential.The results show successful co-fermentation of syngas and aqueous condensate components like phenols and N-heterocycles.However,the characteristics and load of the aqueous condensates affected process performance and product formation.The toxicity,likely resulting from the synergistic effect of multiple toxicants,depended on the PACs’composition.At 37°C,concentrations of 15.6 gCOD/gVSS and 7.8 gCOD/gVSS of sewage sludge-derived aqueous condensate inhibited by 50%carboxydotrophic and methanogenic activity,respectively.At 55°C,loads between 3.9 and 6.8 gCOD/gVSS inhibited by 50%both reactions.Polyethylene plastics condensate showed higher toxicity,with 2.8 gCOD/gVSS and 0.3 gCOD/gVSS at 37°C decreasing carboxydotrophic and methanogenic rates by 50%.At 55°C,0.3 gCOD/gVSS inhibited by 50%CO uptake rates and methanogenesis.Increasing PAC loads reduced methane production and promoted short-chain carboxylates formation.The recalcitrant components in sewage sludge condensate hindered e-mol recovery,while plastics condensate showed high e-mol recoveries despite the stronger toxicity.Even with challenges posed by substrate toxicity and composition variations,the successful conversion of syngas and aqueous condensates highlights the potential of this technology in advancing carbon and energy recovery from anthropogenic waste streams.
基金Project(2006CB600902) supported by the Major State Basic Research and Development Program of China
文摘In order to increase the understanding of the pyrolysis mechanism, Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry-mass spectrometric coupling technique (TG-MS) were used to study the pyrolysis behavior of furfural-acetone resin used for new carbon materials. The curing and carbonization mechanisms of furfural-acetone resin were mainly investigated; structural changes and volatile products evolved during pyrolysis were analyzed. The results indicate that, during pyrolysis of furfural-acetone resin adding 7% (mass fraction) phosphorous acid as curing agent, the rupture of C—O bond in the five-membered heterocycle firstly takes place to release oxygen atoms and then does the C—H bond, which enable the molecular chain to cross-link and condense, then lead to the formation of three dimensional networking structure. With the increase of pyrolyzing temperature, the scission of methyl and the opening of furan ring are generated. As a result, the recomposition of molecular chain structure is generated and a hexatomic fused ring containing double bonds is built. The main volatile products during pyrolysis of furfural- acetone resin are H2O, and a small mount of CO, CO2 and CH4. At elevated temperatures, dehydrogenation takes place and hydrogen gas is evolved.
文摘In the present work, novolac phenolic resin-based composites reinforced with short discrete carbon fibers were pyrolized at different temperatures from 400℃ to 900℃. Their physical and chemical properties were studied, linterfacial bonding between the matrix and carbon fiber and its influence on mechanical properties of analyzed composites were analyzed. Experimental results demonstrated strengthening of interfacial bonding with increase of pyrolysis temperature. Evolution of failure behavior was observed.
