Polymerization-induced self-assembly(PISA)combines synthesis and self-assembly of artificial polymers in one-pot,which brings us one step closer to emulating biosynthesis.However,the reported PISA formulations primari...Polymerization-induced self-assembly(PISA)combines synthesis and self-assembly of artificial polymers in one-pot,which brings us one step closer to emulating biosynthesis.However,the reported PISA formulations primarily focus on developing nano-objects with new chemical compositions and rarely on structural regulation of polymers with specific components.Herein,sequence structure controllable polymerization-induced self-assembly(SCPISA)is reported by using 7-(2-methacryloyloxyethoxy)-4-methylcoumarin(CMA)as a monomer.During the copolymerization of 2-hydroxyethyl methacrylate(HEMA)and CMA,controlled incorporation of CMA units into the polymer chains can be realized by programmable light/heat changes.SCPISA-based P(HEMA-co-CMA)copolymers with the same composition but different sequence structures generate a range of assemblies.Moreover,the morphologies of the resultant nano-objects can also be controlled by regulating the feed molar ratio of CMA and HEMA,which is similar to the conventional PISA,but the synthesis procedure is obviously simplified in SCPISA.The versatility of the methodology is further demonstrated by the fabrication of different functional nano-objects with sequence structure-dependent morphologies in SCPISA systems with different functional monomers.展开更多
Ultra-pure mesoporous silica microspheres with good monodispersity were synthesized in two steps： nanometer-sized silica sol was produced by the sol-gel process, then micrometer-sized silica microspheres were synthes...Ultra-pure mesoporous silica microspheres with good monodispersity were synthesized in two steps： nanometer-sized silica sol was produced by the sol-gel process, then micrometer-sized silica microspheres were synthesized by polymerization-induced colloid aggregation of the silica sol. The total metal content of the microspheres was extremely low, which eliminated the tailing of chromatographic peaks by chelating reagents. The pore structure of the silica microspheres could be controlled by altering the sol-gel conditions. The silica microsphere particle size could be adjusted by using different polymerizationinduced colloid aggregation conditions.展开更多
Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmos...Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g.argon,nitrogen)are usually required.Moreover,the large-scale preparation of block copolymer nano-objects at room temperature is challenging.Herein,we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA)in continuous flow reactors with oxygen toleranee.The addition of glucose oxidase(GOx)and glucose into the reaction mixture can consume oxygen efficiently and constantly,allow the flow photo-PISA to be performed under open-air conditions.Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L)was needed to achieve the oxygen tolerance.Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP)of core-forming block,monomer concentration,reaction temperature,and solvent composition.We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.展开更多
Main observation and conclusion Polymerization-induced self-assembly(PISA)is an effective method to prepare block copolymer(BCP)particles with various morphologies.However,BCPs with inverse bicontinuous phase structur...Main observation and conclusion Polymerization-induced self-assembly(PISA)is an effective method to prepare block copolymer(BCP)particles with various morphologies.However,BCPs with inverse bicontinuous phase structure have been rarely prepared via PISA.Herein,we report the preparation of particles.展开更多
A chemical reaction that drives a physical polymer selfassembly process,namely,polymerization-induced self-assembly(PISA),combines block copolymer synthesis and nanoparticle formation efficiently at high polymer conce...A chemical reaction that drives a physical polymer selfassembly process,namely,polymerization-induced self-assembly(PISA),combines block copolymer synthesis and nanoparticle formation efficiently at high polymer concentrations.Various nanoparticlemorphologies such as spheres,worms,and vesicles can be prepared readily in polar and nonpolarmedia.PISA has been well developed in combination with reversible addition-fragmentation chain transfer(RAFT)polymerization.Notably,developments with other polymerization methods are also achieved.In this report,first,we discuss the general principles of RAFT-PISA and the nanoparticles generated from this method.Specifically,new insights into polymer nucleation and subsequent morphological evolution are highlighted.Subsequently,PISA formulations that use other polymerization methods[atom transfer radical polymerization(ATRP),nitroxide-mediated polymerization(NMP),ring-opening metathesis polymerization(ROMP),and ring-opening polymerization(ROP)of N-carboxyanhydrides(NCAs)]are summarized in detail.Finally,more exotic PISA formulations are emphasized:these are based on organotelluriummediated living radical polymerization(TERP),living anionic polymerization(LAP),addition-fragmentation chain transfer(AFCT)polymerization,reversible complexation-mediated polymerization(RCMP),and cobalt-mediated radical polymerization(CMRP),or utilize a comonomer that undergoes radical ringopening polymerization(rROP).This reviewis concluded with a perspective on the status and potential of PISA.展开更多
Polymerization-induced self-assembly(PISA) is an efficient and versatile method to afford polymeric nano-objects with polymorphic morphologies. Compared to dispersion PISA syntheses based on soluble monomers, the vast...Polymerization-induced self-assembly(PISA) is an efficient and versatile method to afford polymeric nano-objects with polymorphic morphologies. Compared to dispersion PISA syntheses based on soluble monomers, the vast majority of emulsion PISA formulations using insoluble monomers leads to kinetically-trapped spheres. Herein, we present aqueous emulsion PISA formulations generating worms and vesicles besides spheres. Two monomers with different butyl groups, n-butyl(n BHMA) and tert-butyl(t BHMA) α-hydroxymethyl acrylate, and thus possessing different water solubilities were synthesized via Baylis-Hillman reaction. Photoinitiated aqueous emulsion polymerizations of n BHMA and t BHMA employing poly(ethylene glycol) macromolecular chain transfer agents(macro-CTAs, PEG45-CTA, and PEG113-CTA) at 40 °C were systematically investigated to evaluate the effect of monomer structure and solubility on the morphology of the generated block copolymer nano-objects. Higher order morphologies including worms and vesicles were readily accessed for t BHMA, which has a higher water solubility than that of n BHMA. This study proves that plasticization of the core-forming block by water plays a key role in enhancing chain mobility required for morphological transition in emulsion PISA.展开更多
Nucleophilic substitution reaction and 1,3-dicarbonyl compounds play significant roles in organic chemistry, and non-traditional intrinsic luminescence (NTIL) has become an emerging research area. Here, we demonstrate...Nucleophilic substitution reaction and 1,3-dicarbonyl compounds play significant roles in organic chemistry, and non-traditional intrinsic luminescence (NTIL) has become an emerging research area. Here, we demonstrate the successful nucleophilic substitution polymerization of 1,3-dicarbonyl compounds, including acetylacetone, 3,5-heptanedione, methyl acetoacetate, cyclopentane-1,3-dione, 1,3-indandione, 1-phenyl-1,3-butanedione and dibenzoylmethane, where reactive hydrogens at α position of 1,3-dicarbonyl compounds are involved. Through this base catalyzed nucleophilic substitution polycondensation between 1,3-dicarbonyl compounds and α,α’-dibromo xylene, a series of nonconjugated poly(1,3-dicarbonyl)s have been successfully prepared with high yield (up to >99%) under mild conditions. Investigations reveal that this nucleophilic substitution polycondensation exhibits self-accelerating effect and flexible stoichiometry characteristics, which exhibits advantages over traditional polycondensation methods. This polymerization also exhibits intriguing polymerization-induced emission (PIE) characteristics, where nonconjugated poly(1,3-dicarbonyl)s exhibit intriguing chemical structure dependent aggregation-induced emission (AIE) type NTIL. This work therefore expands the monomer, method, chemical structure and property libraries of polymer chemistry, which may cause inspirations to polymerization methodology, PIE, AIE and NTIL.展开更多
pH-and reductive-responsive prodrug nanoparticles are constructed via a highly efficient strategy, polymerization-induced selfassembly(PISA). First, reversible addition-fragmentation chain transfer(RAFT) polymerizatio...pH-and reductive-responsive prodrug nanoparticles are constructed via a highly efficient strategy, polymerization-induced selfassembly(PISA). First, reversible addition-fragmentation chain transfer(RAFT) polymerization of 2-(diisopropylamino) ethyl methacrylate(DIPEMA) and camptothecin prodrug monomer(CPTM) using biocompatible poly(N-(2-hydroxypropyl) methacrylamide)(PHPMA-CPDB) as the macro RAFT agent is carried out, forming prodrug diblock copolymer PHPMA-P(DIPEMA-co-CPTM). Then, simultaneous fulfillment of polymerization, self-assembly, and drug encapsulation are achieved via RAFT dispersion polymerization of benzyl methacrylate(Bz MA) using the PHPMA-P(DIPEMA-co-CPTM) as the macro RAFT agent. The prodrug nanoparticles have three layers, the biocompatible shell(PHPMA), the drug-conjugated middle layer(P(DIPEMA-co-CPTM)) and the PBz MA core, and relatively high concentration(250 mg/g). The prodrug nanoparticles can respond to two stimuli(reductive and acidic conditions). Due to reductive microenvironment of cytosol, the cleavage of the conjugated camptothecin(CPT) within the prodrug nanoparticles could be effectively triggered. p H-Induced hydrophobic/hydrophilic transition of the PDIPEMA chains results in faster diffusion of GSH into the CPTM units, thus accelerated release of CPT is observed in mild acidic and reductive conditions. Cell viability assays show that the prodrug nanoparticles exhibit well performance of intracellular drug delivery and good anticancer activity.展开更多
Polymerization-induced cooperative assembly(PICA)is reported to efficiently access inverse bicontinuous mesophases within particles consisting of amphiphilic block copolymers(BCPs)and solvophobic copolymers.Reversible...Polymerization-induced cooperative assembly(PICA)is reported to efficiently access inverse bicontinuous mesophases within particles consisting of amphiphilic block copolymers(BCPs)and solvophobic copolymers.Reversible addition-fragmentation chain transfer(RAFT)dispersion alternating copolymerization of styrene and pentafluorostyrene is conducted in 2%v/v toluene/ethanol by simultaneously using poly(N,N-dimethylacrylamide)(PDMA29)as a macromolecular chain transfer agent(macro-CTA)and small molecule CTA.展开更多
Porous polymer beads（PPBs） containing hierarchical bimodal pore structure with gigapores and meso-macropores were prepared by polymerization-induced phase separation（PIPS） and emulsion-template technique in a glas...Porous polymer beads（PPBs） containing hierarchical bimodal pore structure with gigapores and meso-macropores were prepared by polymerization-induced phase separation（PIPS） and emulsion-template technique in a glass capillary microfluidic device（GCMD）. Fabrication procedure involved the preparation of water-in-oil emulsion by emulsifying aqueous solution into the monomer solution that contains porogen. The emulsion was added into the GCMD to fabricate the（water-in-oil）-in-water double emulsion droplets. The flow rate of the carrier continuous phase strongly influenced the formation mechanism and size of droplets. Formation mechanism transformed from dripping to jetting and size of droplets decreased from 550 μm to 250 μm with the increase in flow rate of the carrier continuous phase. The prepared droplets were initiated for polymerization by on-line UV-irradiation to form PPBs. The meso-macropores in these beads were generated by PIPS because of the presence of porogen and gigapores obtained from the emulsion-template. The pore morphology and pore size distribution of the PPBs were investigated extensively by scanning electron microscopy and mercury intrusion porosimetry（MIP）. New pore morphology was formed at the edge of the beads different from traditional theory because of different osmolarities between the water phase of the emulsion and the carrier continuous phase. The morphology and proportion of bimodal pore structure can be tuned by changing the kind and amount of porogen.展开更多
Collecting both enantiomorphs with high optical purity and yield in a single crystallization process can be achieved by adding aggregated polymeric“tailor-made”additives,known as nano-splitters.Inefficient preparati...Collecting both enantiomorphs with high optical purity and yield in a single crystallization process can be achieved by adding aggregated polymeric“tailor-made”additives,known as nano-splitters.Inefficient preparation and large addition amount have hindered the practical application of such amazing nanoparticles.Herein,we report the first nano-splitters containing aggregation-induced emission luminogens prepared via polymerization-induced self-assembly of block copolymer,poly[(S)-2-(tert-butoxycarbonylamino)-6-(methacrylamido)hexanoic acid]-b-polystyrene,followed by the removal of tert-butoxycarbonyl groups.When added into the supersaturated solution of racemic amino acids(a.a.)with seeds,the fluorescent labeled nano-assemblies enantioselectivity dyed the crystals of S-a.a.and enabled the separation from colorless R-a.a.crystals in terms of fluorescent difference.Both enantiomers were obtained with high optical purity and yield(e.g.,R-asparagine monohydrate,>99 ee%;S-asparagine monohydrate,∼94 ee%;88%total yield).Owing to a low detection limit of fluorescence,the addition amount was reduced to 0.03 wt%without remarkably compromising the ee values of both enantiomorphs.Due to the low addition amount and efficient synthesis,the output–input ratio was increased greatly.展开更多
Comprehensive Summary The size and size distribution of polymeric nanoparticles have great impact on their physicochemical and biological properties.Polymerization-induced self-assembly(PISA)has been demonstrated to b...Comprehensive Summary The size and size distribution of polymeric nanoparticles have great impact on their physicochemical and biological properties.Polymerization-induced self-assembly(PISA)has been demonstrated to be an efficient method to fabricate various polymeric nanoparticles,among which polymeric vesicles have attracted great interest due to their unique hollow structure.展开更多
Polymerization-induced chiral self-assembly(PICSA)is an efficient strategy that not only allows the construction of the supramolecular chiral assemblies in a controlled manner but also can regulate the morphology in s...Polymerization-induced chiral self-assembly(PICSA)is an efficient strategy that not only allows the construction of the supramolecular chiral assemblies in a controlled manner but also can regulate the morphology in situ.Herein,a series of azobenzene-containing block copolymer(Azo-BCP)assemblies with tunable morphologies and supramolecular chirality were obtained through the PICSA strategy.The supramolecular chirality of Azo-BCP assemblies could be regulated by carbon dioxide(CO_(2))stimulus,and completely recovered by bubbling with Ar.A reversible morphology transformation and chiroptical switching process could also be achieved by the alternative 365 nm UV light irradiation and heatingcooling treatment.Moreover,the supramolecular chirality is thermo-responsive and a reversible chiral-achiral switching was successfully realized,which can be reversibly repeated for at least five times.This work provides a feasible strategy for constructing triple stimuli-responsive supramolecular chiral nano-objects in situ.展开更多
Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembl...Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembly and photoinduced seeded reversible addition-fragmentation chain transfer(RAFT)polymerization to prepare a diverse set of core-shell colloidal particles with a well-defined polymer layer.Chemical compositions,structures,and thicknesses of polymer layers could be conveniently regulated by using different types of monomers and feed[monomer]/[chain transfer agent]ratios during seeded RAFT polymerization.展开更多
Polymerization-induced self-assembly(PISA)has become one of the most versatile approaches for scalable preparation of linear block copolymer nanoparticles with various morphologies.However,the controlled introduction ...Polymerization-induced self-assembly(PISA)has become one of the most versatile approaches for scalable preparation of linear block copolymer nanoparticles with various morphologies.However,the controlled introduction of branching into the core-forming block and the effect on the morphologies of block copolymer nanoparticles under PISA conditions have rarely been explored.Herein,a series of multifunctional macromolecular chain transfer agents(macro-CTAs)were first synthesized by a two-step green light-activated photoiniferter polymerization using two types of chain transfer monomers(CTMs).These macro-CTAs were then used to mediate reversible addition-fragmentation chain transfer(RAFT)dispersion polymerization of styrene(St)to prepare block copolymers with different core-forming block structures and the assemblies.The effect of the core-forming block structure on the morphology of block copolymer nanoparticles was investigated in detail.Transmission electron microscopy(TEM)analysis indicated that the brush-like core-forming block structure facilitated the formation of higher-order morphologies,while the branched core-forming block structure favored the formation of lower-order morphologies.Moreover,it was found that using macroCTAs with a shorter length also promoted the formation of higher-order morphologies.Finally,structures of block copolymers and the assemblies were further controlled by changing the structure of macro-CTA or using a binary mixture of two different macro-CTAs.We expect that this work not only sheds light on the synthesis of block copolymer nanoparticles but also provide important mechanistic insights into PISA of nonlinear block copolymers.展开更多
A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles cont...A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles containing a conductive PEG corona, fumed SiO2 and Li TFSI salt via polymerization-induced self-assembly is proposed. This method to prepare SPEs has the advantages of one-pot convenient synthesis, avoiding use of organic solvent and conveniently adding inorganic additives. CH3O-PEG-IC combines advantages of PEG and polycarbonate, the in situ synthesized PEG-b-PS nanoparticles containing a rigid polystyrene(PS) core and a PEG corona guarantee continuous lithium ion transport in the synthesized SPEs, and the fumed SiO2 optimizes the interfacial properties and improves the electrochemical stability, all of which afford SPEs a well considerable room temperature ionic conductivity of 1.73 × 10^-4S/cm, high lithium transference number of 0.53, and wide electrochemical stability window of 5.5 V(vs. Li^+/Li). By employing these SPEs, the assembled solid state cells of Li FePO4 |SPEs|Li exhibit considerable cell performance.展开更多
Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrat...Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrate was prepared via polymerization-induced phase separation. The PIM-1 TFC membranes were fabricated via a dip-coating procedure. Metallic ion-cross-linked PIM-1 TFC membranes were fabricated by hydrolyzing the PIM-1 TFC membrane in an alkali solution and then cross-linking it in a multivalent metallic ion solution. The pore size and porous structures were evaluated by low-temperature N_2 adsorption–desorption analysis. The membrane structure was investigated by field-emission scanning electron microscopy. The effects of heat treatment and pore-forming additives on the gas permeance of the UV-cross-linked porous substrate are reported. The effects of different pre-coating treatments on the gas permeance of the metallic ion-cross-linked PIM-1 TFC membrane are also discussed. The metallic ion-crosslinked PIM-1 TFC membrane displayed high CO_2/N_2 selectivity(23) and good CO_2 permeance(1058 GPU).展开更多
A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic dibl...A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.展开更多
Reversible addition-fragmentation chain transfer(RAFT)-mediated polymerization-induced self-assembly(PISA)of star block copolymer and linear block copolymer using a binary mixture of a star-like macro-RAFT agent and a...Reversible addition-fragmentation chain transfer(RAFT)-mediated polymerization-induced self-assembly(PISA)of star block copolymer and linear block copolymer using a binary mixture of a star-like macro-RAFT agent and a linear macro-RAFT agent is reported.With this formulation,star block copolymer and diblock copolymer were formed simultaneously to generate colloidally stable star/linear block copolymer assemblies.Size exclusion chromatography(SEC)analysis confirmed the presence of two types of polymers in the final samples.The molar ratio of the star-like macro-RAFT agent and the linear macro-RAFT agent has a significant impact on the morphology of polymer assemblies.It was found that increasing the amount of star-like macro-RAFT agent facilitated the formation of higher-order morphologies.Additionally,effects of other reaction parameters including the length/number of the arm of the star-like macro-RAFT agent,degree of polymer(DP),monomer concentration on the morphology of star/linear block copolymer assemblies were also investigated.We expect that this work will offer new possibilities for the scalable preparation of polymer assemblies with unique structures and functions.展开更多
What is the most favorite and original chemistry developed in your research group?Ring-opening polymerization-induced self-assembly of N-carboxyanhydrides(NCA-PISA),and fusion-induced particle assembly(FIPA).How do yo...What is the most favorite and original chemistry developed in your research group?Ring-opening polymerization-induced self-assembly of N-carboxyanhydrides(NCA-PISA),and fusion-induced particle assembly(FIPA).How do you get into this specific field?Could you please share some experiences with our readers?NCA-PISA was developed to solve the biodegradability problem of nanoparticles by traditional PISA,while FIPA was inspired by nature.展开更多
基金supported by the National Natural Science Foundation of China(22171255,22131010,52021002)。
文摘Polymerization-induced self-assembly(PISA)combines synthesis and self-assembly of artificial polymers in one-pot,which brings us one step closer to emulating biosynthesis.However,the reported PISA formulations primarily focus on developing nano-objects with new chemical compositions and rarely on structural regulation of polymers with specific components.Herein,sequence structure controllable polymerization-induced self-assembly(SCPISA)is reported by using 7-(2-methacryloyloxyethoxy)-4-methylcoumarin(CMA)as a monomer.During the copolymerization of 2-hydroxyethyl methacrylate(HEMA)and CMA,controlled incorporation of CMA units into the polymer chains can be realized by programmable light/heat changes.SCPISA-based P(HEMA-co-CMA)copolymers with the same composition but different sequence structures generate a range of assemblies.Moreover,the morphologies of the resultant nano-objects can also be controlled by regulating the feed molar ratio of CMA and HEMA,which is similar to the conventional PISA,but the synthesis procedure is obviously simplified in SCPISA.The versatility of the methodology is further demonstrated by the fabrication of different functional nano-objects with sequence structure-dependent morphologies in SCPISA systems with different functional monomers.
基金Financial support was granted by China National Natural Science Foundation(No.51242001)the Doctor Scientific Research Foundation of Henan University of Technology (2013BS029)
文摘Ultra-pure mesoporous silica microspheres with good monodispersity were synthesized in two steps： nanometer-sized silica sol was produced by the sol-gel process, then micrometer-sized silica microspheres were synthesized by polymerization-induced colloid aggregation of the silica sol. The total metal content of the microspheres was extremely low, which eliminated the tailing of chromatographic peaks by chelating reagents. The pore structure of the silica microspheres could be controlled by altering the sol-gel conditions. The silica microsphere particle size could be adjusted by using different polymerizationinduced colloid aggregation conditions.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.21971047 and 21504017)Innovation Project of Education Department in Guangdong(No.2018KTSCX053)+1 种基金Y.C.acknowledges the support from Guangdong Special Support Program(No.2017TX04N371)J.T.acknowledges the support from Pearl River Young Scholar of Guangdong.
文摘Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g.argon,nitrogen)are usually required.Moreover,the large-scale preparation of block copolymer nano-objects at room temperature is challenging.Herein,we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA)in continuous flow reactors with oxygen toleranee.The addition of glucose oxidase(GOx)and glucose into the reaction mixture can consume oxygen efficiently and constantly,allow the flow photo-PISA to be performed under open-air conditions.Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L)was needed to achieve the oxygen tolerance.Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP)of core-forming block,monomer concentration,reaction temperature,and solvent composition.We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.
基金Financial support from the National Natural Science Founda-ton of China(No.21674059)the Fundamental Research Funds far the Central Universities is thanked.
文摘Main observation and conclusion Polymerization-induced self-assembly(PISA)is an effective method to prepare block copolymer(BCP)particles with various morphologies.However,BCPs with inverse bicontinuous phase structure have been rarely prepared via PISA.Herein,we report the preparation of particles.
基金This work was funded by the National Natural Science Foundation(NSFC)of China(grant no.21925505 and 21674081)the China Postdoctoral Science Foundation(grant no.2020M671197).
文摘A chemical reaction that drives a physical polymer selfassembly process,namely,polymerization-induced self-assembly(PISA),combines block copolymer synthesis and nanoparticle formation efficiently at high polymer concentrations.Various nanoparticlemorphologies such as spheres,worms,and vesicles can be prepared readily in polar and nonpolarmedia.PISA has been well developed in combination with reversible addition-fragmentation chain transfer(RAFT)polymerization.Notably,developments with other polymerization methods are also achieved.In this report,first,we discuss the general principles of RAFT-PISA and the nanoparticles generated from this method.Specifically,new insights into polymer nucleation and subsequent morphological evolution are highlighted.Subsequently,PISA formulations that use other polymerization methods[atom transfer radical polymerization(ATRP),nitroxide-mediated polymerization(NMP),ring-opening metathesis polymerization(ROMP),and ring-opening polymerization(ROP)of N-carboxyanhydrides(NCAs)]are summarized in detail.Finally,more exotic PISA formulations are emphasized:these are based on organotelluriummediated living radical polymerization(TERP),living anionic polymerization(LAP),addition-fragmentation chain transfer(AFCT)polymerization,reversible complexation-mediated polymerization(RCMP),and cobalt-mediated radical polymerization(CMRP),or utilize a comonomer that undergoes radical ringopening polymerization(rROP).This reviewis concluded with a perspective on the status and potential of PISA.
基金financially supported by the National Natural Science Foundation of China (No. 21674059)
文摘Polymerization-induced self-assembly(PISA) is an efficient and versatile method to afford polymeric nano-objects with polymorphic morphologies. Compared to dispersion PISA syntheses based on soluble monomers, the vast majority of emulsion PISA formulations using insoluble monomers leads to kinetically-trapped spheres. Herein, we present aqueous emulsion PISA formulations generating worms and vesicles besides spheres. Two monomers with different butyl groups, n-butyl(n BHMA) and tert-butyl(t BHMA) α-hydroxymethyl acrylate, and thus possessing different water solubilities were synthesized via Baylis-Hillman reaction. Photoinitiated aqueous emulsion polymerizations of n BHMA and t BHMA employing poly(ethylene glycol) macromolecular chain transfer agents(macro-CTAs, PEG45-CTA, and PEG113-CTA) at 40 °C were systematically investigated to evaluate the effect of monomer structure and solubility on the morphology of the generated block copolymer nano-objects. Higher order morphologies including worms and vesicles were readily accessed for t BHMA, which has a higher water solubility than that of n BHMA. This study proves that plasticization of the core-forming block by water plays a key role in enhancing chain mobility required for morphological transition in emulsion PISA.
基金funding support from NSFC(Nos.22271286,21971236).
文摘Nucleophilic substitution reaction and 1,3-dicarbonyl compounds play significant roles in organic chemistry, and non-traditional intrinsic luminescence (NTIL) has become an emerging research area. Here, we demonstrate the successful nucleophilic substitution polymerization of 1,3-dicarbonyl compounds, including acetylacetone, 3,5-heptanedione, methyl acetoacetate, cyclopentane-1,3-dione, 1,3-indandione, 1-phenyl-1,3-butanedione and dibenzoylmethane, where reactive hydrogens at α position of 1,3-dicarbonyl compounds are involved. Through this base catalyzed nucleophilic substitution polycondensation between 1,3-dicarbonyl compounds and α,α’-dibromo xylene, a series of nonconjugated poly(1,3-dicarbonyl)s have been successfully prepared with high yield (up to >99%) under mild conditions. Investigations reveal that this nucleophilic substitution polycondensation exhibits self-accelerating effect and flexible stoichiometry characteristics, which exhibits advantages over traditional polycondensation methods. This polymerization also exhibits intriguing polymerization-induced emission (PIE) characteristics, where nonconjugated poly(1,3-dicarbonyl)s exhibit intriguing chemical structure dependent aggregation-induced emission (AIE) type NTIL. This work therefore expands the monomer, method, chemical structure and property libraries of polymer chemistry, which may cause inspirations to polymerization methodology, PIE, AIE and NTIL.
基金supported by the National Key R&D Program of China (2017YFA0205601)the National Natural Science Foundation of China (51625305, 21704095, 21774113, 21525420)
文摘pH-and reductive-responsive prodrug nanoparticles are constructed via a highly efficient strategy, polymerization-induced selfassembly(PISA). First, reversible addition-fragmentation chain transfer(RAFT) polymerization of 2-(diisopropylamino) ethyl methacrylate(DIPEMA) and camptothecin prodrug monomer(CPTM) using biocompatible poly(N-(2-hydroxypropyl) methacrylamide)(PHPMA-CPDB) as the macro RAFT agent is carried out, forming prodrug diblock copolymer PHPMA-P(DIPEMA-co-CPTM). Then, simultaneous fulfillment of polymerization, self-assembly, and drug encapsulation are achieved via RAFT dispersion polymerization of benzyl methacrylate(Bz MA) using the PHPMA-P(DIPEMA-co-CPTM) as the macro RAFT agent. The prodrug nanoparticles have three layers, the biocompatible shell(PHPMA), the drug-conjugated middle layer(P(DIPEMA-co-CPTM)) and the PBz MA core, and relatively high concentration(250 mg/g). The prodrug nanoparticles can respond to two stimuli(reductive and acidic conditions). Due to reductive microenvironment of cytosol, the cleavage of the conjugated camptothecin(CPT) within the prodrug nanoparticles could be effectively triggered. p H-Induced hydrophobic/hydrophilic transition of the PDIPEMA chains results in faster diffusion of GSH into the CPTM units, thus accelerated release of CPT is observed in mild acidic and reductive conditions. Cell viability assays show that the prodrug nanoparticles exhibit well performance of intracellular drug delivery and good anticancer activity.
基金support by the National Natural Science Foundation of China(nos.51733003 and 21674059)the Fundamental Research Funds for the Central Universities are thanked.
文摘Polymerization-induced cooperative assembly(PICA)is reported to efficiently access inverse bicontinuous mesophases within particles consisting of amphiphilic block copolymers(BCPs)and solvophobic copolymers.Reversible addition-fragmentation chain transfer(RAFT)dispersion alternating copolymerization of styrene and pentafluorostyrene is conducted in 2%v/v toluene/ethanol by simultaneously using poly(N,N-dimethylacrylamide)(PDMA29)as a macromolecular chain transfer agent(macro-CTA)and small molecule CTA.
文摘Porous polymer beads（PPBs） containing hierarchical bimodal pore structure with gigapores and meso-macropores were prepared by polymerization-induced phase separation（PIPS） and emulsion-template technique in a glass capillary microfluidic device（GCMD）. Fabrication procedure involved the preparation of water-in-oil emulsion by emulsifying aqueous solution into the monomer solution that contains porogen. The emulsion was added into the GCMD to fabricate the（water-in-oil）-in-water double emulsion droplets. The flow rate of the carrier continuous phase strongly influenced the formation mechanism and size of droplets. Formation mechanism transformed from dripping to jetting and size of droplets decreased from 550 μm to 250 μm with the increase in flow rate of the carrier continuous phase. The prepared droplets were initiated for polymerization by on-line UV-irradiation to form PPBs. The meso-macropores in these beads were generated by PIPS because of the presence of porogen and gigapores obtained from the emulsion-template. The pore morphology and pore size distribution of the PPBs were investigated extensively by scanning electron microscopy and mercury intrusion porosimetry（MIP）. New pore morphology was formed at the edge of the beads different from traditional theory because of different osmolarities between the water phase of the emulsion and the carrier continuous phase. The morphology and proportion of bimodal pore structure can be tuned by changing the kind and amount of porogen.
基金National Natural Science Foundation of China,Grant/Award Numbers:51833001,21674002,21905003China Postdoctoral Science Foundation,Grant/Award Numbers:2019M660002,2020T130011。
文摘Collecting both enantiomorphs with high optical purity and yield in a single crystallization process can be achieved by adding aggregated polymeric“tailor-made”additives,known as nano-splitters.Inefficient preparation and large addition amount have hindered the practical application of such amazing nanoparticles.Herein,we report the first nano-splitters containing aggregation-induced emission luminogens prepared via polymerization-induced self-assembly of block copolymer,poly[(S)-2-(tert-butoxycarbonylamino)-6-(methacrylamido)hexanoic acid]-b-polystyrene,followed by the removal of tert-butoxycarbonyl groups.When added into the supersaturated solution of racemic amino acids(a.a.)with seeds,the fluorescent labeled nano-assemblies enantioselectivity dyed the crystals of S-a.a.and enabled the separation from colorless R-a.a.crystals in terms of fluorescent difference.Both enantiomers were obtained with high optical purity and yield(e.g.,R-asparagine monohydrate,>99 ee%;S-asparagine monohydrate,∼94 ee%;88%total yield).Owing to a low detection limit of fluorescence,the addition amount was reduced to 0.03 wt%without remarkably compromising the ee values of both enantiomorphs.Due to the low addition amount and efficient synthesis,the output–input ratio was increased greatly.
基金the financial support of the National Natural Science Foundation of China(Nos.22171255,21774113,and 52021002)。
文摘Comprehensive Summary The size and size distribution of polymeric nanoparticles have great impact on their physicochemical and biological properties.Polymerization-induced self-assembly(PISA)has been demonstrated to be an efficient method to fabricate various polymeric nanoparticles,among which polymeric vesicles have attracted great interest due to their unique hollow structure.
基金financial support from the National Natural Science Foundation of China(Nos.92056111 and 21971180)Nature Science Key Basic Research of Jiangsu Province for Higher Education(No.19KJA360006)+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX202655)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions supported this work。
文摘Polymerization-induced chiral self-assembly(PICSA)is an efficient strategy that not only allows the construction of the supramolecular chiral assemblies in a controlled manner but also can regulate the morphology in situ.Herein,a series of azobenzene-containing block copolymer(Azo-BCP)assemblies with tunable morphologies and supramolecular chirality were obtained through the PICSA strategy.The supramolecular chirality of Azo-BCP assemblies could be regulated by carbon dioxide(CO_(2))stimulus,and completely recovered by bubbling with Ar.A reversible morphology transformation and chiroptical switching process could also be achieved by the alternative 365 nm UV light irradiation and heatingcooling treatment.Moreover,the supramolecular chirality is thermo-responsive and a reversible chiral-achiral switching was successfully realized,which can be reversibly repeated for at least five times.This work provides a feasible strategy for constructing triple stimuli-responsive supramolecular chiral nano-objects in situ.
基金support from the Science and Technology Program of Guangzhou(No.2024A04J2821)the National Natural Science Foundation of China(Nos.52222301,22171055)the Guangdong Natural Science Foundation for Distinguished Young Scholar(No.2022B1515020078)。
文摘Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembly and photoinduced seeded reversible addition-fragmentation chain transfer(RAFT)polymerization to prepare a diverse set of core-shell colloidal particles with a well-defined polymer layer.Chemical compositions,structures,and thicknesses of polymer layers could be conveniently regulated by using different types of monomers and feed[monomer]/[chain transfer agent]ratios during seeded RAFT polymerization.
基金financially supported by the National Natural Science Foundation of China(Nos.22171055 and 52222301)the Guangdong Natural Science Foundation for Distinguished Young Scholar(No.2022B1515020078)the Science and Technology Program of Guangzhou(No.2024A04J2821)。
文摘Polymerization-induced self-assembly(PISA)has become one of the most versatile approaches for scalable preparation of linear block copolymer nanoparticles with various morphologies.However,the controlled introduction of branching into the core-forming block and the effect on the morphologies of block copolymer nanoparticles under PISA conditions have rarely been explored.Herein,a series of multifunctional macromolecular chain transfer agents(macro-CTAs)were first synthesized by a two-step green light-activated photoiniferter polymerization using two types of chain transfer monomers(CTMs).These macro-CTAs were then used to mediate reversible addition-fragmentation chain transfer(RAFT)dispersion polymerization of styrene(St)to prepare block copolymers with different core-forming block structures and the assemblies.The effect of the core-forming block structure on the morphology of block copolymer nanoparticles was investigated in detail.Transmission electron microscopy(TEM)analysis indicated that the brush-like core-forming block structure facilitated the formation of higher-order morphologies,while the branched core-forming block structure favored the formation of lower-order morphologies.Moreover,it was found that using macroCTAs with a shorter length also promoted the formation of higher-order morphologies.Finally,structures of block copolymers and the assemblies were further controlled by changing the structure of macro-CTA or using a binary mixture of two different macro-CTAs.We expect that this work not only sheds light on the synthesis of block copolymer nanoparticles but also provide important mechanistic insights into PISA of nonlinear block copolymers.
基金supported by the National Science Foundation for Distinguished Young Scholars (No. 21525419)the National Natural Science Foundation of China (No. 21474054)the National Key Research and Development Program of China (No. 2016YFA0202503)
文摘A facile one-pot synthesis of solid polymer electrolytes(SPEs), composed of carbonate terminated poly(ethylene glycol)(CH3O-PEG-IC), poly(ethylene glycol)-block-polystyrene(PEG-b-PS) block copolymer nanoparticles containing a conductive PEG corona, fumed SiO2 and Li TFSI salt via polymerization-induced self-assembly is proposed. This method to prepare SPEs has the advantages of one-pot convenient synthesis, avoiding use of organic solvent and conveniently adding inorganic additives. CH3O-PEG-IC combines advantages of PEG and polycarbonate, the in situ synthesized PEG-b-PS nanoparticles containing a rigid polystyrene(PS) core and a PEG corona guarantee continuous lithium ion transport in the synthesized SPEs, and the fumed SiO2 optimizes the interfacial properties and improves the electrochemical stability, all of which afford SPEs a well considerable room temperature ionic conductivity of 1.73 × 10^-4S/cm, high lithium transference number of 0.53, and wide electrochemical stability window of 5.5 V(vs. Li^+/Li). By employing these SPEs, the assembled solid state cells of Li FePO4 |SPEs|Li exhibit considerable cell performance.
基金Supported by the National Natural Science Foundation of China(21506160,21776217)the Science and Technology Plans of Tianjin(16PTSYJC00110)
文摘Metallic ion-cross-linked polymer of intrinsic microporosity(PIM-1) thin-film composite(TFC) membranes supported on an ultraviolet(UV)-cross-linked porous substrate were fabricated. The UV-cross-linked porous substrate was prepared via polymerization-induced phase separation. The PIM-1 TFC membranes were fabricated via a dip-coating procedure. Metallic ion-cross-linked PIM-1 TFC membranes were fabricated by hydrolyzing the PIM-1 TFC membrane in an alkali solution and then cross-linking it in a multivalent metallic ion solution. The pore size and porous structures were evaluated by low-temperature N_2 adsorption–desorption analysis. The membrane structure was investigated by field-emission scanning electron microscopy. The effects of heat treatment and pore-forming additives on the gas permeance of the UV-cross-linked porous substrate are reported. The effects of different pre-coating treatments on the gas permeance of the metallic ion-cross-linked PIM-1 TFC membrane are also discussed. The metallic ion-crosslinked PIM-1 TFC membrane displayed high CO_2/N_2 selectivity(23) and good CO_2 permeance(1058 GPU).
文摘A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.
基金the National Natural Science Foundation of China(Grant 22171055,52222301,and 21971047)the Guangdong Natural Science Foundation for Distinguished Young Scholar(Grant 2022B1515020078)the Science and Technology Program of Guangzhou(Grant SL2023A04J00142).
文摘Reversible addition-fragmentation chain transfer(RAFT)-mediated polymerization-induced self-assembly(PISA)of star block copolymer and linear block copolymer using a binary mixture of a star-like macro-RAFT agent and a linear macro-RAFT agent is reported.With this formulation,star block copolymer and diblock copolymer were formed simultaneously to generate colloidally stable star/linear block copolymer assemblies.Size exclusion chromatography(SEC)analysis confirmed the presence of two types of polymers in the final samples.The molar ratio of the star-like macro-RAFT agent and the linear macro-RAFT agent has a significant impact on the morphology of polymer assemblies.It was found that increasing the amount of star-like macro-RAFT agent facilitated the formation of higher-order morphologies.Additionally,effects of other reaction parameters including the length/number of the arm of the star-like macro-RAFT agent,degree of polymer(DP),monomer concentration on the morphology of star/linear block copolymer assemblies were also investigated.We expect that this work will offer new possibilities for the scalable preparation of polymer assemblies with unique structures and functions.
基金This work was supported by the National Natural Science Foundation of China(Nos.21925505,52003195,and 22101207)Shanghai International Scientific Collaboration Fund(No.21520710100)+1 种基金the China Postdoctoral Science Foundation(Nos.2019M661614 and 2020M671197)J.D.is a recipient of the National Science Fund for Distinguished Young Scholars.
文摘What is the most favorite and original chemistry developed in your research group?Ring-opening polymerization-induced self-assembly of N-carboxyanhydrides(NCA-PISA),and fusion-induced particle assembly(FIPA).How do you get into this specific field?Could you please share some experiences with our readers?NCA-PISA was developed to solve the biodegradability problem of nanoparticles by traditional PISA,while FIPA was inspired by nature.
