The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride so...The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride solutions of specific concentrations with different test ages.Hardened properties of the mixes were assessed in terms of weight loss and compressive strength.X-ray diffraction(XRD)and scanning electron microscopy(SEM)of mixes were performed to analysis the phase evolution and microstructure.The results demonstrated that the introduction of nano-SiO_(2) emulsion significantly decreased the compressive strength loss and calcium hydroxide(CH)crystal content of hydration production,and then enhanced the resistance of cement-based grouting materials to chloride ion penetration.This improvement derives from the filling and pozzolanic effects of nano-SiO_(2) particles,which were incorporated via an emulsion and attributed to a well dispersion in grouting matrix.展开更多
CO_(2) emulsions used for EOR have received a lot of interest because of its good performance on CO_(2)mobility reduction.However,most of them have been focusing on the high quality CO_(2) emulsion(high CO_(2) fractio...CO_(2) emulsions used for EOR have received a lot of interest because of its good performance on CO_(2)mobility reduction.However,most of them have been focusing on the high quality CO_(2) emulsion(high CO_(2) fraction),while CO_(2) emulsion with high water cut has been rarely researched.In this paper,we carried out a comprehensive experimental study of using high water cut CO_(2)/H_(2)O emulsion for enhancing oil recovery.Firstly,a nonionic surfactant,alkyl glycosides(APG),was selected to stabilize CO_(2)/H_(2)O emulsion,and the corresponding morphology and stability were evaluated with a transparent PVT cell.Subsequently,plugging capacity and apparent viscosity of CO_(2)/H_(2)O emulsion were measured systematically by a sand pack displacement apparatus connected with a 1.95-m long capillary tube.Furthermore,a high water cut(40 vol%) CO_(2)/H_(2)O emulsion was selected for flooding experiments in a long sand pack and a core sample,and the oil recovery,the rate of oil recovery,and the pressure gradients were analyzed.The results indicated that APG had a good performance on emulsifying and stabilizing CO_(2) emulsion.An inversion from H_(2)O/CO_(2) emulsion to CO_(2)/H_(2)O emulsion with the increase in water cut was confirmed.CO_(2)/H_(2)O emulsions with lower water cuts presented higher apparent viscosity,while the optimal plugging capacity of CO_(2)/H_(2)O emulsion occurred at a certain water cut.Eventually,the displacement using CO_(2)/H_(2)O emulsion provided 18.98% and 13.36% additional oil recovery than that using pure CO_(2) in long sand pack and core tests,respectively.This work may provide guidelines for EOR using CO_(2) emulsions with high water cut.展开更多
Capture of CO2 by hydrate is one of the attractive technologies for reducing greenhouse effect.The primary challenges are the large energy consumption,low hydrate formation rate and separation efficiency.This work pre...Capture of CO2 by hydrate is one of the attractive technologies for reducing greenhouse effect.The primary challenges are the large energy consumption,low hydrate formation rate and separation efficiency.This work presents a new method for capture of CO2 from simulated flue gasCO2(16.60%,by mole) /N2 binary mixture by formation of cyclopentane(CP) hydrates at initial temperature of 8.1°C with the feed pressures from 2.49 to 3.95 MPa.The effect of cyclopentane and cyclopentane/water emulsion on the hydrate formation rate and CO2 separation efficiency was studied in a 1000 ml stirred reactor.The results showed the hydrate formation rate could be increased remarkably with cyclopentane/water emulsion.CO2 could be enriched to 43.97%(by mole) and 35.29%(by mole) from simulated flue gas with cyclopentane and cyclopentane/water(O/W) emulsion,respectively,by one stage hydrate separation under low feed pressure.CO2 separation factor with cyclopentane was 6.18,higher than that with cyclopentane/water emulsion(4.01) ,in the range of the feed pressure.The results demonstrated that cyclopentane/water emulsion is a good additive for efficient hydrate capture of CO2.展开更多
A new kind of emulsion containing nano TiO_2 was developed through the dispersion experiment. A commercial emulsion and a prepared by our lab emulsion without nano particles were chosen as controls to test the tribolo...A new kind of emulsion containing nano TiO_2 was developed through the dispersion experiment. A commercial emulsion and a prepared by our lab emulsion without nano particles were chosen as controls to test the tribological and antibacterial properties of this new emulsion. The load carrying capacity, friction coefficient and average diameter of wear scars were tested by a four-ball machine and the comprehensive antifriction parameter ω was calculated. The wetting angle was also tested using a JC200C1 wetting angle tester. The micro surface and roughness of rolled strips were analyzed to investigate the tribological performance of the recommended new emulsion in strip production. It is shown that the new nano-emulsion possesses a higher load carrying capacity and wetting ability. Therefore the abrasive/plowing wear is reduced more efficiently with the addition of nano particles, and the micro surface is improved. The density of bacteria in the emulsions was tested after the cold rolling experiment. The emulsion breaking ratio and bacteria density were also tested in different time intervals after the cold rolling experiment. The final p H values and bacteria density of different layers of emulsions were measured and the sediment was analyzed by TEM to evaluate the antibacterial behavior of this new emulsion. It is shown that the density of microbial colonies which led to a corruption of emulsions was decreased about 90% and the effective antibacterial period was prolonged.展开更多
In this study,to meet the stringent requirements on the hydrophobicity of nano-SiO_(2)particles for use in depressurization and enhanced injection operations in high-temperature and high-salinity oil reservoirs,second...In this study,to meet the stringent requirements on the hydrophobicity of nano-SiO_(2)particles for use in depressurization and enhanced injection operations in high-temperature and high-salinity oil reservoirs,secondary chemical grafting modification of nano-SiO_(2)is performed using a silane coupling agent to prepare superhydrophobic nano-SiO_(2) particles.Using these superhydrophobic nano-SiO_(2)particles as the core agent,and liquid paraffin or diesel as the dispersion medium,a uniform dispersion of nano-SiO_(2)particles is achieved under high-speed stirring,and a chemically enhanced water injection system with colloidal stability that can be maintained for more than 60 d is successfully developed.Using this system,a field test of depressurization and enhanced injection is carried out on six wells in an oilfield,and the daily oil production level is increased by 11 t.The cumulative increased water injection is 58784 m^(3),the effective rate of the measures was 100%,and the average validity period is 661 d.展开更多
This article reports the development of a novel switchable Pickering emulsion with rapid CO_(2)/N_(2) respon-siveness,which is stabilized using alumina nanoparticles hydrophobized in situ with a trace amount of a swit...This article reports the development of a novel switchable Pickering emulsion with rapid CO_(2)/N_(2) respon-siveness,which is stabilized using alumina nanoparticles hydrophobized in situ with a trace amount of a switchable superamphiphile via electrostatic interactions.With the introduction of CO_(2) for 30 s,the Pickering emulsion can be spontaneously demulsified with complete phase separation;the emulsion can then be reconstructed in response to N_(2) purging for 10 min followed by homogenization.Moreover,the stable Pickering emulsion can be stored for more than 60 days at room temperature with-out any visible change.The CO_(2)/N_(2)-responsive behavior of the switchable Pickering emulsion is attribu-ted to the reversible desorption/adsorption of the switchable surfactants on the surfaces of the alumina nanoparticles upon the alternative bubbling of CO_(2)or N_(2).Thanks to the simple fabrication of the surfac-tant and the hydrophobization of the alumina nanoparticles,this research has developed an extremely facile and cost-efficient method for preparing a rapidly CO_(2)/N_(2)-responsive switchable Pickering emul-sion.The dosage of the switchable surfactants has been significantly reduced by nearly 1500 times(from 150 to 0.1 mmol·L^(-1))as compared with the dosage used in previous studies.Moreover,the as-prepared CO_(2)/N_(2)-responsive switchable Pickering emulsion is environmentally friendly,mild,and nontoxic;thus,it holds great potential for practical applications with considerable economic and environmental benefits,such as oil transport,fossil fuel production,environmental gases detection,and the encapsulation and release of active ingredients.展开更多
Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular w...Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular weight of PEI (M<sub>n</sub> = 600, 8000, and 10,000). The size and morphology of the core-shell nanoparticles were characterized by a particle size analyzer and scanning electron microscopy. The nanoparticles were 178 - 408 nm in diameter and swelled in water or methanol by 30 - 75 nm. The size of the nanoparticles increased with MMA contents, whereas the size distribution progressively became homogeneous with increasing molecular weight of PEI. Lastly, we measured CO<sub>2</sub> adsorption capacity of the grafted PMMA/PEI core-shell nanoparticles, and we found the capacity to be limited at a level of 0.69 mg, which occurred for nanoparticles prepared from emulsions at a pH value of 11.展开更多
BACKGROUND： It is known that intravenous anesthetic etomidate fat emulsion has cerebral protection. Now many scholars focus on the research of its cerebral protection from molecular biology, but the mechanism of cere...BACKGROUND： It is known that intravenous anesthetic etomidate fat emulsion has cerebral protection. Now many scholars focus on the research of its cerebral protection from molecular biology, but the mechanism of cerebral protection is still fully unclear. OBJECTIVE： To observe the influence of etomidate fat emulsion on the [Ca^2＋]i in hippocampal neurons during the transient cerebral ischemia injury in rats. DESIGN： Randomized controlled observation. SETTING： Weifang Medical College. MATERIALS： This study was carried out in the functional laboratory of Weifang Medical College between October 2005 and March 2006. Twenty-four male healthy Wistar rats, aged 3 to 4 months, were involved. Etomidate fat emulsion was provided by the limited company of En-hua Medical Bloc in Jiangsu Province （code of H200205l l） and the other agents and materials were provided by Laboratory Center of Weifang Medical College. METHODS： The 24 Wistar rats were randomized into 3 groups： sham-operation group, model group and etomidate preconditioning group, with 8 rats in each. Rat models of transient cerebral ischemia injury were made by the ligation of bilateral carotid arteries combined with descending blood pressure in the latter two groups. Before ischemia （ligation of bilateral common carotid artery）, rats in the etomidate preconditioning group were intraperitoneally injected with 12 mg/kg etomidate fat emulsion and then persistently intraperitoneally injected with etomidate fat emulsion at 1.0 mg/kg per minute. Rats in the model group were not administrated. Rats in the sham-operation group were only performed bilateral common carotid artery isolation. When rats were modeled, their brain tissues were quickly taken out and detected. MAIN OUTCOME MEASURES： Change of the fluorescence pixel value of the [Ca^2＋]i in each group by the laser scanning confocal microscope. RESULTS： Twenty-four rats were involved in the final analysis. Fluorescence pixel value in the sham-operation group was in the low level. Fluorescence pixel value in the model group was significantly higher than that in the sham-operation group （P 〈 0.01）. Fluorescence pixel value in the etomidate preconditioning group was significantly lower than that in the model group （P 〈 0.01 ）. CONCLUSION： The protection of etomidate fat emulsion to the transient cerebral ischemic injury in rats is associated with the inhibition to the increase of [Ca^2＋]i to some extent.展开更多
Chitosan （CS） was successfully modified in supercritical carbon dioxide （ scCOz ） by grafting method to enhance its water solubility. In this work, a three.arm star-like fluorinated polymer was synthesized by atom...Chitosan （CS） was successfully modified in supercritical carbon dioxide （ scCOz ） by grafting method to enhance its water solubility. In this work, a three.arm star-like fluorinated polymer was synthesized by atom transfer radical polymerization （ ATRP ） method and applied as a surfactant in supereriticul carbon dioxide （scCO2 ）. Then 2-acrylamido-2-methyl propane sulfonie acid （AMPS） was grafted onto CS （CS-g-PAMPS） in H2O/scCO2 inverse emulsion. The effects of mass ratio of water and surfactants （Rw/s ） and pressure of scCO2 on the grafting reaction were investigated. The grafting rate, partide size, and dispersity in water of CS-g-PAMPS varied greatly as Rw/s and pressure of scCO2 changed. It could be found that the value of Rw/s at 12 and the pressure of scCO2 at 30 MPa were the optimum conditions for the grafting reaction. CS-g-PAMPS prepared in this reaction system has higher grafting rate, smaller particle sizes, and better dispersity in water than those prepared via conventional methods.展开更多
A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of...A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of co-solvents into the PAES.The effects ofγ-methacryloxypropyltrimethoxysilane(KH-570)content and co-solvent on the properties of PAES films were investigated.Dynamic laser scattering(DLS)data indicate that the average diameter of PAES(96 nm)is slightly larger than that of PAE(89 nm).Transmission electron microscopy (TEM)photo discloses that colloidal silica particles are dispersed uniformly around polyacrylate particles and some of the colloidal silica particles are adsorbed on the surface of PAE particles.The crosslinking degree data and Fourier transform infrared(FT-IR)spectra confirm that the chemical structure of the PAES is changed to form Si-O-Si-polymer crosslinking networks during the film formation.Atomic force microscope(AFM)photos show the solvent induced sol-gel process of colloidal silica and the Si-based polymer distribution on the film surface of the dried PAES.Thermogravimetric analysis(TGA)curves demonstrate that the PAES films display much better thermal stability than PAE.展开更多
Nano-SiO_2 with high activity and mesopores was prepared through sol-gel synthesis followed by low-temperatureheat treatment and ball milling firstly in our experiments. TEM was performed to measure particle sizes. Ni...Nano-SiO_2 with high activity and mesopores was prepared through sol-gel synthesis followed by low-temperatureheat treatment and ball milling firstly in our experiments. TEM was performed to measure particle sizes. Nitrogenadsorption experiments were carried out to estimate specific surface area, porous distribution and porous ratio by BETand BJH methods. The content of Si-OH in SiO_2 surface was calculated by analysis of the results of hydrogen-oxygencontent mensuration (HOCM). As a result, appropriate heat treatment system and ball milling time are important topreparation for nano-SiO_2 with high activity and mesopores, which are 5～50 nm particles, 5～6 nm average aperture,85%～93% porous ratio, and 51%～55% Si-OH content in surface. Nano-SiO_2 with that structure has high surfaceenergy and activity. This process, which has simple facilities and operation rules, is a new way of preparation fornano-SiO_2 with high activity and mesopores.展开更多
Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presenc...Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presence of 2.2′- azobis(2-methylpropionamidine) dihydrochloride as an initiator.The kinetics of soap-free emulsion polymerization and the effects of polymerization factors were examined.In addition,the optimum polymerization conditions of poly(styrene-co- glycidyl methacrylate) latex microspheres for...展开更多
Green and low cost CO_(2) and CaO were used to stimulate amine emulsions to reveal the responsive behavior of amine emulsions.On this basis,oil-based drilling fluids responsive to CO_(2) and CaO were formulated and th...Green and low cost CO_(2) and CaO were used to stimulate amine emulsions to reveal the responsive behavior of amine emulsions.On this basis,oil-based drilling fluids responsive to CO_(2) and CaO were formulated and their properties were evaluated.The results showed that the amine emulsions inversed from water-in-oil state to oil-in-water state readily and their rheological behavior underwent transitions of decreasing,rising again and decreasing again via induction by CO_(2).These CO_(2) responsive behaviors could be reversed by CaO.Oil-based drilling fluids prepared based on the amine emulsions with oil-water volume ratios of 50:50 to 70:30,densities of 1.4-2.0 g/cm^(3) had good rheological and filtration properties at 160℃;and be readily cleaned up using CO_(2) bubbling.The useless solid phase with low density could be removed efficiently via reducing the viscosity of emulsion by CO_(2) and the residual liquid phase could be restored to the original state by CaO and reused to prepare drilling fluid.The mechanisms analysis indicated that CO_(2)/CaO induced the reversible conversion between amine emulsifiers and their salts,which enabled the reversible regulation of both the hydrophilic-lipophilic balance of amine emulsifiers and the emulsion particles’size and finally caused the controllable-reversion of the form and rheology of amine emulsion.展开更多
This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences...This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences of some factors, such as the concentration of monomers, initiator and emulsifier are discussed. The polymerization rate equations of above two monomers can be written as follows: R(p) = k[M](1.21)[I](0.82)[E](0.57) (for QACEMA) R(p) = k'[M](1.34)[I](0.90)[E](0.62) (for DADMAC)展开更多
The present status and development trends of nano-composite coatings were briefly introduced. The nano-SiO2 was dispersed into crylic acid resin by ultrasonic wave and high-energy ball milling, the influence of nano-S...The present status and development trends of nano-composite coatings were briefly introduced. The nano-SiO2 was dispersed into crylic acid resin by ultrasonic wave and high-energy ball milling, the influence of nano-SiO2 on shielding property of coatings was investigated. Relation between particle size distribution of original nano-SiO2 and its dispersal in water and alcohol after treatment were analyzed, respectively. The ultraviolet permeation rate of coatings filled with nano-SiO2 was detected by ultraviolet spectral photometer. And the particle size distribution of coatings was examined by TEM. The results show that particle size distribution is comparative convergence and smaller one order of magnitude after dispersal treatment. The size of most nano-SiO2 in coatings is smaller than 100nm, which indicates that the amount of nano-SiO2 in the resin is 20% （solid content of resin）, the permeation rate of ultraviolet of composite coatings decreases to 20%. The research of its excellent ultraviolet shielding property mechanism indicates minor size and high surface energy of nano-SiO2 can produce different absorption, reflection and scatter actions to different wavelengths.展开更多
基金Funded by a Science and Technology Project from the Ministry of Housing and Urban-Rural Development of the People’s Republic of China(No.2019-K-047)Yangzhou Government-Yangzhou University Cooperative Platform Project for Science and Technology Innovation(No.YZ2020262)。
文摘The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride solutions of specific concentrations with different test ages.Hardened properties of the mixes were assessed in terms of weight loss and compressive strength.X-ray diffraction(XRD)and scanning electron microscopy(SEM)of mixes were performed to analysis the phase evolution and microstructure.The results demonstrated that the introduction of nano-SiO_(2) emulsion significantly decreased the compressive strength loss and calcium hydroxide(CH)crystal content of hydration production,and then enhanced the resistance of cement-based grouting materials to chloride ion penetration.This improvement derives from the filling and pozzolanic effects of nano-SiO_(2) particles,which were incorporated via an emulsion and attributed to a well dispersion in grouting matrix.
基金The financial supports received from the National Natural Science Foundation of China(Nos.22178378,22127812)。
文摘CO_(2) emulsions used for EOR have received a lot of interest because of its good performance on CO_(2)mobility reduction.However,most of them have been focusing on the high quality CO_(2) emulsion(high CO_(2) fraction),while CO_(2) emulsion with high water cut has been rarely researched.In this paper,we carried out a comprehensive experimental study of using high water cut CO_(2)/H_(2)O emulsion for enhancing oil recovery.Firstly,a nonionic surfactant,alkyl glycosides(APG),was selected to stabilize CO_(2)/H_(2)O emulsion,and the corresponding morphology and stability were evaluated with a transparent PVT cell.Subsequently,plugging capacity and apparent viscosity of CO_(2)/H_(2)O emulsion were measured systematically by a sand pack displacement apparatus connected with a 1.95-m long capillary tube.Furthermore,a high water cut(40 vol%) CO_(2)/H_(2)O emulsion was selected for flooding experiments in a long sand pack and a core sample,and the oil recovery,the rate of oil recovery,and the pressure gradients were analyzed.The results indicated that APG had a good performance on emulsifying and stabilizing CO_(2) emulsion.An inversion from H_(2)O/CO_(2) emulsion to CO_(2)/H_(2)O emulsion with the increase in water cut was confirmed.CO_(2)/H_(2)O emulsions with lower water cuts presented higher apparent viscosity,while the optimal plugging capacity of CO_(2)/H_(2)O emulsion occurred at a certain water cut.Eventually,the displacement using CO_(2)/H_(2)O emulsion provided 18.98% and 13.36% additional oil recovery than that using pure CO_(2) in long sand pack and core tests,respectively.This work may provide guidelines for EOR using CO_(2) emulsions with high water cut.
基金Supported by the National High Technology Research and Development Program of China（2007AA03Z229） the National Natural Science Foundation of China（20876019）
文摘Capture of CO2 by hydrate is one of the attractive technologies for reducing greenhouse effect.The primary challenges are the large energy consumption,low hydrate formation rate and separation efficiency.This work presents a new method for capture of CO2 from simulated flue gasCO2(16.60%,by mole) /N2 binary mixture by formation of cyclopentane(CP) hydrates at initial temperature of 8.1°C with the feed pressures from 2.49 to 3.95 MPa.The effect of cyclopentane and cyclopentane/water emulsion on the hydrate formation rate and CO2 separation efficiency was studied in a 1000 ml stirred reactor.The results showed the hydrate formation rate could be increased remarkably with cyclopentane/water emulsion.CO2 could be enriched to 43.97%(by mole) and 35.29%(by mole) from simulated flue gas with cyclopentane and cyclopentane/water(O/W) emulsion,respectively,by one stage hydrate separation under low feed pressure.CO2 separation factor with cyclopentane was 6.18,higher than that with cyclopentane/water emulsion(4.01) ,in the range of the feed pressure.The results demonstrated that cyclopentane/water emulsion is a good additive for efficient hydrate capture of CO2.
基金supported by the National Natural Science Foundation of China (contract/grant number: 51274037) affiliated to the project: "The research of lubrication model and interaction between nano-lubricating particles and rolling deformed surface."
文摘A new kind of emulsion containing nano TiO_2 was developed through the dispersion experiment. A commercial emulsion and a prepared by our lab emulsion without nano particles were chosen as controls to test the tribological and antibacterial properties of this new emulsion. The load carrying capacity, friction coefficient and average diameter of wear scars were tested by a four-ball machine and the comprehensive antifriction parameter ω was calculated. The wetting angle was also tested using a JC200C1 wetting angle tester. The micro surface and roughness of rolled strips were analyzed to investigate the tribological performance of the recommended new emulsion in strip production. It is shown that the new nano-emulsion possesses a higher load carrying capacity and wetting ability. Therefore the abrasive/plowing wear is reduced more efficiently with the addition of nano particles, and the micro surface is improved. The density of bacteria in the emulsions was tested after the cold rolling experiment. The emulsion breaking ratio and bacteria density were also tested in different time intervals after the cold rolling experiment. The final p H values and bacteria density of different layers of emulsions were measured and the sediment was analyzed by TEM to evaluate the antibacterial behavior of this new emulsion. It is shown that the density of microbial colonies which led to a corruption of emulsions was decreased about 90% and the effective antibacterial period was prolonged.
基金funded by National Natural Science Foundation of China (grant number 42207083)the project of SINOREC (No.322052)
文摘In this study,to meet the stringent requirements on the hydrophobicity of nano-SiO_(2)particles for use in depressurization and enhanced injection operations in high-temperature and high-salinity oil reservoirs,secondary chemical grafting modification of nano-SiO_(2)is performed using a silane coupling agent to prepare superhydrophobic nano-SiO_(2) particles.Using these superhydrophobic nano-SiO_(2)particles as the core agent,and liquid paraffin or diesel as the dispersion medium,a uniform dispersion of nano-SiO_(2)particles is achieved under high-speed stirring,and a chemically enhanced water injection system with colloidal stability that can be maintained for more than 60 d is successfully developed.Using this system,a field test of depressurization and enhanced injection is carried out on six wells in an oilfield,and the daily oil production level is increased by 11 t.The cumulative increased water injection is 58784 m^(3),the effective rate of the measures was 100%,and the average validity period is 661 d.
基金supported by the Natural Sciences and Engineering Research Council of Canada (NSERC)the Canada Research Chairs Program (Hongbo Zeng)the China Scholarship Council (CSC) (An Chen)
文摘This article reports the development of a novel switchable Pickering emulsion with rapid CO_(2)/N_(2) respon-siveness,which is stabilized using alumina nanoparticles hydrophobized in situ with a trace amount of a switchable superamphiphile via electrostatic interactions.With the introduction of CO_(2) for 30 s,the Pickering emulsion can be spontaneously demulsified with complete phase separation;the emulsion can then be reconstructed in response to N_(2) purging for 10 min followed by homogenization.Moreover,the stable Pickering emulsion can be stored for more than 60 days at room temperature with-out any visible change.The CO_(2)/N_(2)-responsive behavior of the switchable Pickering emulsion is attribu-ted to the reversible desorption/adsorption of the switchable surfactants on the surfaces of the alumina nanoparticles upon the alternative bubbling of CO_(2)or N_(2).Thanks to the simple fabrication of the surfac-tant and the hydrophobization of the alumina nanoparticles,this research has developed an extremely facile and cost-efficient method for preparing a rapidly CO_(2)/N_(2)-responsive switchable Pickering emul-sion.The dosage of the switchable surfactants has been significantly reduced by nearly 1500 times(from 150 to 0.1 mmol·L^(-1))as compared with the dosage used in previous studies.Moreover,the as-prepared CO_(2)/N_(2)-responsive switchable Pickering emulsion is environmentally friendly,mild,and nontoxic;thus,it holds great potential for practical applications with considerable economic and environmental benefits,such as oil transport,fossil fuel production,environmental gases detection,and the encapsulation and release of active ingredients.
文摘Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular weight of PEI (M<sub>n</sub> = 600, 8000, and 10,000). The size and morphology of the core-shell nanoparticles were characterized by a particle size analyzer and scanning electron microscopy. The nanoparticles were 178 - 408 nm in diameter and swelled in water or methanol by 30 - 75 nm. The size of the nanoparticles increased with MMA contents, whereas the size distribution progressively became homogeneous with increasing molecular weight of PEI. Lastly, we measured CO<sub>2</sub> adsorption capacity of the grafted PMMA/PEI core-shell nanoparticles, and we found the capacity to be limited at a level of 0.69 mg, which occurred for nanoparticles prepared from emulsions at a pH value of 11.
文摘BACKGROUND： It is known that intravenous anesthetic etomidate fat emulsion has cerebral protection. Now many scholars focus on the research of its cerebral protection from molecular biology, but the mechanism of cerebral protection is still fully unclear. OBJECTIVE： To observe the influence of etomidate fat emulsion on the [Ca^2＋]i in hippocampal neurons during the transient cerebral ischemia injury in rats. DESIGN： Randomized controlled observation. SETTING： Weifang Medical College. MATERIALS： This study was carried out in the functional laboratory of Weifang Medical College between October 2005 and March 2006. Twenty-four male healthy Wistar rats, aged 3 to 4 months, were involved. Etomidate fat emulsion was provided by the limited company of En-hua Medical Bloc in Jiangsu Province （code of H200205l l） and the other agents and materials were provided by Laboratory Center of Weifang Medical College. METHODS： The 24 Wistar rats were randomized into 3 groups： sham-operation group, model group and etomidate preconditioning group, with 8 rats in each. Rat models of transient cerebral ischemia injury were made by the ligation of bilateral carotid arteries combined with descending blood pressure in the latter two groups. Before ischemia （ligation of bilateral common carotid artery）, rats in the etomidate preconditioning group were intraperitoneally injected with 12 mg/kg etomidate fat emulsion and then persistently intraperitoneally injected with etomidate fat emulsion at 1.0 mg/kg per minute. Rats in the model group were not administrated. Rats in the sham-operation group were only performed bilateral common carotid artery isolation. When rats were modeled, their brain tissues were quickly taken out and detected. MAIN OUTCOME MEASURES： Change of the fluorescence pixel value of the [Ca^2＋]i in each group by the laser scanning confocal microscope. RESULTS： Twenty-four rats were involved in the final analysis. Fluorescence pixel value in the sham-operation group was in the low level. Fluorescence pixel value in the model group was significantly higher than that in the sham-operation group （P 〈 0.01）. Fluorescence pixel value in the etomidate preconditioning group was significantly lower than that in the model group （P 〈 0.01 ）. CONCLUSION： The protection of etomidate fat emulsion to the transient cerebral ischemic injury in rats is associated with the inhibition to the increase of [Ca^2＋]i to some extent.
基金National Natural Science Foundation of China(No.20674017)Shanghai Key Laboratory Project of China(No.08DZ2230500)
文摘Chitosan （CS） was successfully modified in supercritical carbon dioxide （ scCOz ） by grafting method to enhance its water solubility. In this work, a three.arm star-like fluorinated polymer was synthesized by atom transfer radical polymerization （ ATRP ） method and applied as a surfactant in supereriticul carbon dioxide （scCO2 ）. Then 2-acrylamido-2-methyl propane sulfonie acid （AMPS） was grafted onto CS （CS-g-PAMPS） in H2O/scCO2 inverse emulsion. The effects of mass ratio of water and surfactants （Rw/s ） and pressure of scCO2 on the grafting reaction were investigated. The grafting rate, partide size, and dispersity in water of CS-g-PAMPS varied greatly as Rw/s and pressure of scCO2 changed. It could be found that the value of Rw/s at 12 and the pressure of scCO2 at 30 MPa were the optimum conditions for the grafting reaction. CS-g-PAMPS prepared in this reaction system has higher grafting rate, smaller particle sizes, and better dispersity in water than those prepared via conventional methods.
基金Supported by the Program for New Century Excellent Talents in University（NCET-08-0204） National Natural Science Foundation of China（20976060） the Scientific Research Foundation for the Returned Overseas Chinese Scholars State Edu-cation Ministry （China）
文摘A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of co-solvents into the PAES.The effects ofγ-methacryloxypropyltrimethoxysilane(KH-570)content and co-solvent on the properties of PAES films were investigated.Dynamic laser scattering(DLS)data indicate that the average diameter of PAES(96 nm)is slightly larger than that of PAE(89 nm).Transmission electron microscopy (TEM)photo discloses that colloidal silica particles are dispersed uniformly around polyacrylate particles and some of the colloidal silica particles are adsorbed on the surface of PAE particles.The crosslinking degree data and Fourier transform infrared(FT-IR)spectra confirm that the chemical structure of the PAES is changed to form Si-O-Si-polymer crosslinking networks during the film formation.Atomic force microscope(AFM)photos show the solvent induced sol-gel process of colloidal silica and the Si-based polymer distribution on the film surface of the dried PAES.Thermogravimetric analysis(TGA)curves demonstrate that the PAES films display much better thermal stability than PAE.
文摘Nano-SiO_2 with high activity and mesopores was prepared through sol-gel synthesis followed by low-temperatureheat treatment and ball milling firstly in our experiments. TEM was performed to measure particle sizes. Nitrogenadsorption experiments were carried out to estimate specific surface area, porous distribution and porous ratio by BETand BJH methods. The content of Si-OH in SiO_2 surface was calculated by analysis of the results of hydrogen-oxygencontent mensuration (HOCM). As a result, appropriate heat treatment system and ball milling time are important topreparation for nano-SiO_2 with high activity and mesopores, which are 5～50 nm particles, 5～6 nm average aperture,85%～93% porous ratio, and 51%～55% Si-OH content in surface. Nano-SiO_2 with that structure has high surfaceenergy and activity. This process, which has simple facilities and operation rules, is a new way of preparation fornano-SiO_2 with high activity and mesopores.
基金supported by the State Key Laboratory of Chemical Engineering of Zhejiang Universitythe financial support from the National Natural Science Foundation of China (No.20676113).
文摘Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presence of 2.2′- azobis(2-methylpropionamidine) dihydrochloride as an initiator.The kinetics of soap-free emulsion polymerization and the effects of polymerization factors were examined.In addition,the optimum polymerization conditions of poly(styrene-co- glycidyl methacrylate) latex microspheres for...
基金Suppported by National Natural Science Foundation of China(NO.51804263)Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(NO.2020CX040102,NO.2020CX040201)。
文摘Green and low cost CO_(2) and CaO were used to stimulate amine emulsions to reveal the responsive behavior of amine emulsions.On this basis,oil-based drilling fluids responsive to CO_(2) and CaO were formulated and their properties were evaluated.The results showed that the amine emulsions inversed from water-in-oil state to oil-in-water state readily and their rheological behavior underwent transitions of decreasing,rising again and decreasing again via induction by CO_(2).These CO_(2) responsive behaviors could be reversed by CaO.Oil-based drilling fluids prepared based on the amine emulsions with oil-water volume ratios of 50:50 to 70:30,densities of 1.4-2.0 g/cm^(3) had good rheological and filtration properties at 160℃;and be readily cleaned up using CO_(2) bubbling.The useless solid phase with low density could be removed efficiently via reducing the viscosity of emulsion by CO_(2) and the residual liquid phase could be restored to the original state by CaO and reused to prepare drilling fluid.The mechanisms analysis indicated that CO_(2)/CaO induced the reversible conversion between amine emulsifiers and their salts,which enabled the reversible regulation of both the hydrophilic-lipophilic balance of amine emulsifiers and the emulsion particles’size and finally caused the controllable-reversion of the form and rheology of amine emulsion.
基金This project is supported by Tianjin Science Foundation for Youths.
文摘This investigation deals with the free radical polymerization both of (2-methacryloyloxyethyl) trimethyl ammonium chloride (QACEMA) and of diallyldimethyl ammonium chloride (DADMAC) in inverse emulsion. The influences of some factors, such as the concentration of monomers, initiator and emulsifier are discussed. The polymerization rate equations of above two monomers can be written as follows: R(p) = k[M](1.21)[I](0.82)[E](0.57) (for QACEMA) R(p) = k'[M](1.34)[I](0.90)[E](0.62) (for DADMAC)
文摘The present status and development trends of nano-composite coatings were briefly introduced. The nano-SiO2 was dispersed into crylic acid resin by ultrasonic wave and high-energy ball milling, the influence of nano-SiO2 on shielding property of coatings was investigated. Relation between particle size distribution of original nano-SiO2 and its dispersal in water and alcohol after treatment were analyzed, respectively. The ultraviolet permeation rate of coatings filled with nano-SiO2 was detected by ultraviolet spectral photometer. And the particle size distribution of coatings was examined by TEM. The results show that particle size distribution is comparative convergence and smaller one order of magnitude after dispersal treatment. The size of most nano-SiO2 in coatings is smaller than 100nm, which indicates that the amount of nano-SiO2 in the resin is 20% （solid content of resin）, the permeation rate of ultraviolet of composite coatings decreases to 20%. The research of its excellent ultraviolet shielding property mechanism indicates minor size and high surface energy of nano-SiO2 can produce different absorption, reflection and scatter actions to different wavelengths.
