An intramuscular injection (IMI) is an injection given directly into the central area of a specific muscle. Certain medicines need to be administered by the gluteal route for these to be effective. The aim of this stu...An intramuscular injection (IMI) is an injection given directly into the central area of a specific muscle. Certain medicines need to be administered by the gluteal route for these to be effective. The aim of this study was to determine the influence of body mass index (BMI), subcutaneous fat, and muscular thickness of the dorsogluteal IMI site among healthy Japanese women. There were 39 healthy female subjects who volunteered and met the criteria. Their ages ranged from 40s to 60s (50.82 ± 6.04). With the data collected using the B-mode ultrasound images of the dorsogluteal site, it was found that the distance from the epidermis to the under-fascia (DEUF) of the gluteus maximus was dissimilar between the subject’s right and left buttocks. It was found that the distance from the epidermis to the iliac bone (DEI) was significantly more on the right than on the left buttocks. In the case of an adult Japanese woman with a BMI of 21 or more, the DEUF of the gluteus medius was found to be about 30 mm, and the DEI was approximately 50 mm or more. Based on these findings, it is recommended that a needle length of 38 mm (1.5 inches) can be safely used to administer IMIs to the gluteus medius muscle to effectively and efficiently deliver medications through the IMI route.展开更多
Multi-gradient drilling is a new offshore drilling method.The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise cont...Multi-gradient drilling is a new offshore drilling method.The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise control of the wellbore pressure.In this study,a new heat transfer model is proposed by which the variable mass flow is properly taken into account.Using this model,the effects of the main factors influencing the wellbore temperature are analyzed.The results indicate that at the position where the separation injection device is installed,the temperature increase of the fluid in the drill pipe is mitigated due to the inflow/outflow of hollow spheres,and the temperature drop of the fluid in the annulus also decreases.In addition,a lower separation efficiency of the device,a shallower installation depth and a smaller circulating displacement tend to increase the temperature near the bottom of the annulus,thereby helping to reduce the hydrate generation area and playing a positive role in the prevention and control of hydrates in deepwater drilling.展开更多
Interaction between the injected flow from the porous wall and the main flow can reduce drag effectively.The phenomenon is significant to the flight vehicle design.The intensive flux of injection enhances difficulty o...Interaction between the injected flow from the porous wall and the main flow can reduce drag effectively.The phenomenon is significant to the flight vehicle design.The intensive flux of injection enhances difficulty of numerical simulation and requires higher demands on the turbulence model.A turbulent boundary layer flow with mass injection through a porous wall governed by Reynolds averaged Navier-Stokers(RANS)equations is solved by using the Wilcox′s k-ωturbulence model and the obtained resistance coefficient agrees well with the experimental data.The results with and without mass injection are compared with other conditions unchanged.Velocity profile,turbulent kinetic energy and turbulent eddy viscosity are studied in these two cases.Results confirm that the boundary layer is blowing up and the turbulence is better developed with the aid of mass injection,which may explain the drag reduction theoretically.This numerical simulation may deepen our comprehension on this complex flow.展开更多
The influence of fuel pressure fluctuation on multi-injection fuel mass deviation has been studied a lot,but the fuel pressure fluctuation at injector inlet is still not eliminated efficiently.In this paper,a new type...The influence of fuel pressure fluctuation on multi-injection fuel mass deviation has been studied a lot,but the fuel pressure fluctuation at injector inlet is still not eliminated efficiently.In this paper,a new type of hydraulic filter consisting of a damping hole and a chamber is developed for elimination of fuel pressure fluctuation and multi-injection fuel mass deviation.Linear model of the improved high pressure common-rail system（HPCRS）including injector,the pipe connecting common-rail with injector and the hydraulic filter is built.Fuel pressure fluctuation at injector inlet,on which frequency domain analysis is conducted through fast Fourier transformation,is acquired at different target pressure and different damping hole diameter experimentally.The linear model is validated and can predict the natural frequencies of the system.Influence of damping hole diameter on fuel pressure fluctuation is analyzed qualitatively based on the linear model,and it can be inferred that an optimal diameter of the damping hole for elimination of fuel pressure fluctuation exists.Fuel pressure fluctuation and fuel mass deviation under different damping hole diameters are measured experimentally,and it is testified that the amplitude of both fuel pressure fluctuation and fuel mass deviation decreases first and then increases with the increasing of damping hole diameter.The amplitude of main injection fuel mass deviation can be reduced by 73%at most under pilot-main injection mode,and the amplitude of post injection fuel mass deviation can be reduced by 92%at most under main-post injection mode.Fuel mass of a single injection increases with the increasing of the damping hole diameter.The hydraulic filter proposed by this research can be potentially used to eliminate fuel pressure fluctuation at injector inlet and improve the stability of HPCRS fuel injection.展开更多
Thermally induced apoptosis for tumors depends mainly on the intrinsic characteristics of biological tissues as well as treatment temperature profile during magnetic hyperthermia.Further,treatment temperature distribu...Thermally induced apoptosis for tumors depends mainly on the intrinsic characteristics of biological tissues as well as treatment temperature profile during magnetic hyperthermia.Further,treatment temperature distribution inside tumor depends on the injection behavior of irregular tumors,such as the injection dose and the injection location of nanofluids.In order to improve the treatment effect,the simulated annealing algorithm is adopted in this work to optimize the nanofluid injection behavior,and the improved Arrhenius model is used to evaluate the malignant ablations for three typical malignant tumor cell models.In addition,both the injection behavior optimization and the mass diffusion of nanofluid are both taken into consideration in order to improve the treatment effect.The simulation results demonstrate that the injection behavior can be optimized effectively by the proposed optimization method before therapy,the result of which can also conduce to improving the thermal apoptosis possibility for proposed typical malignant cells.Furthermore,an effective approach is also employed by considering longer diffusion duration and correct power dissipation at the same time.The results show that a better result can then be obtained than those in other cases when the power dissipation of MNPs is set to be QMNP=5.4×10^(7)W·m^(3) and the diffusion time is 16 h.展开更多
The Euler-Euler numerical method was used to investigate the effects of contraction ratio on twophase flow mixing with mass transfer in the flow injection nozzle. The geometric shape of the nozzle was modified to impr...The Euler-Euler numerical method was used to investigate the effects of contraction ratio on twophase flow mixing with mass transfer in the flow injection nozzle. The geometric shape of the nozzle was modified to improve carbonation efficiency. A gas inlet hole was created to increase the flow mixing of CO2 with water. A nozzle throat was also introduced to increase the gas dissolution by increasing flow rates. Various contraction ratios of nozzle throat, inlet gas and liquid velocities, and gas bubble sizes were employed to determine their effects on gas hold-up, gas concentration, and mass transfer coefficient. Results revealed that the flow injection nozzle with high contraction ratios improved carbonation because of high gas hold-up. Gas concentration was directly related to contraction ratio and gas flow velocities. Carbonation reduced when high liquid velocities and large gas bubbles were employed because of inefficient flow mixing. This study indicated that flow injection nozzle with large contraction ratios were suitable for carbonation because of their ability to increase gas hold-up, gas concentration, and mass transfer coefficient.展开更多
建立超高效液相色谱-串联质谱测定复杂水质中25种全氟/多氟化合物(PFASs)含量的分析方法。样品经直接过滤、乙腈提取或固相萃取,用Agilent Eclipse Plus C_(18)色谱柱分离,以含0.01%甲酸的甲醇溶液和水作为流动相,梯度洗脱,在电喷雾负...建立超高效液相色谱-串联质谱测定复杂水质中25种全氟/多氟化合物(PFASs)含量的分析方法。样品经直接过滤、乙腈提取或固相萃取,用Agilent Eclipse Plus C_(18)色谱柱分离,以含0.01%甲酸的甲醇溶液和水作为流动相,梯度洗脱,在电喷雾负离子模式下,采用多反应监测模式检测,用内标法定量。25种PFASs的质量浓度在0.5~100μg/L范围内与色谱峰面积线性关系良好,相关系数均大于0.999,3种样品处理方法的检出限分别为0.06~0.20、0.002~0.006μg/L和0.1~0.2 ng/L。样品加标平均回收率为69.9%~115%,测定结果的相对标准偏差为2.9%~19.6%(n=6)。该方法简单快捷、重现性好、灵敏度较高,适用于氟化工园区污水、地表水和地下水中25种PFASs的测定。展开更多
The rat chimera is an important animal model for the study of complex human diseases. In the present study we evaluated the chimeric potential of rat inner cell masses （ICMs） and fetal neural stem （FNS） cells. In ...The rat chimera is an important animal model for the study of complex human diseases. In the present study we evaluated the chimeric potential of rat inner cell masses （ICMs） and fetal neural stem （FNS） cells. In result, three rat chimeras were produced by day 5 （D5） Sprague-Dawley （SD） blastocysts injected with ICMs derived from day 6 （D6） and D5 Dark Agouti （DA） blastocysts; four rat chimeras had been generated by D5 DA blastocyst injected with D5 SD ICMs. For the requirement of gene modification, cultured rat inner cell mass cells were assessed to produce chimeras, but no chimeras were generated from injected embryos. The potential to generate chimeras from rFNS and transfected rFNS cells were tested, but no chimeric pups were produced. Only 2 of 41 fetuses derived from D5 DA blastocyst injection with SD LacZ transfected rFNS cells showed very low number of LacZ positive cells in the section. These results indicate that DA and SD rat ICMs arc able to contribute to chimeras, but their potential decreases significantly after culture in vitro （P〈0.05）, and rFNS cells only have the potential to contribute to early fetal development.展开更多
We previously investigated the thickness of the epidermis and lengths from the skin surface to the muscle fascia and bone based on measurements taken from the ultrasonic echograms of Japanese infants aged 2, 3, 4, 5, ...We previously investigated the thickness of the epidermis and lengths from the skin surface to the muscle fascia and bone based on measurements taken from the ultrasonic echograms of Japanese infants aged 2, 3, 4, 5, 6, and 12 - 15 months. The appropriate needle length for intramuscular injection was 16 mm (5/8 inch) in Japanese infants at any age and site. In the present study, we examined these lengths in 21 infants with physical growth from 2 to 15 months. Average height increased from 58.5 to 73.6 cm and average body weight from 5835 to 9226 g until 15 months. The circumference of the thigh increased from 22.3 cm at 2 months to a maximum of 25.9 cm at 6 months, while that of the deltoid area was 15.2 cm at 2 months and 15.9 cm at 6 months. Subcutaneous mass (length from the skin surface to the muscle fascia) at the thigh increased between 3 and 4 months and decreased at 12 - 15 months and showed good relationship to the circumference of the thigh. Subcutaneous mass at the center of the deltoid area showed the same size until 6 months. Muscle mass (lengths from the muscle fascia to the bone) at thigh and deltoid areas remained the same until 6 months. Ultrasonic echogram is an effective tool for evaluating subcutaneous and muscle mass in young infants.展开更多
Objective:To investigate the effects of female body mass index on embryo development and assisted reproductive technology outcomes,aiming to provide better treatment for patients with different body mass index and pro...Objective:To investigate the effects of female body mass index on embryo development and assisted reproductive technology outcomes,aiming to provide better treatment for patients with different body mass index and provide reference for clinical treatment.Methods:The study retrospectively collected data of 3783 patients who received their first fresh embryo transfer and were ovulated by a long protocol at the Reproductive Medicine Center of the First Affiliated Hospital of Hainan Medical University from January 2015 to October 2021.Patients were divided into four groups based on body mass index(BMI):low weight group,normal weight group,overweight group and obese group.The normal weight group was used as a control to compare the basic information,assisted reproductive technology process,embryo development and assisted reproductive technology outcomes between different groups.Results:Analyzing patients'basic information,we found that the duration of infertility was significantly longer in obese women(P=0.007).Basal hormone levels in the overweight and obese groups were lower than those in the normal group(P<0.05).Basal Follicle-stimulating hormone(FSH),basal Luteinizing hormone(LH),basal Estradiol(E2),basal Progesterone(P),and anti-Mullerian hormone(AMH)in the obese group were lower than the normal weight group(P<0.05),and the number of antral follicle counting(AFC)was reduced in the obese group(P=0.011).The overweight group only showed a decrease in E2 and P levels(P<0.05).During the ART,there was a significant difference in Gonadotropin(Gn)dosage among the four groups,with the obese group was the most,followed by the overweight group,and the low weight group was the least(P<0.001).Gn days were increased in the obese group(P<0.001).LH,E2,and P on trigger day were all lower in the overweight and obese groups than in the normal weight group(P<0.05).Comparing the embryo development process,we found that the blastocysts of the obese group showed delayed development at the stages of pronuclei disappearance,four-cell and blastocyst formation(P<0.05).The ART outcomes were worse in the obese group,the clinical pregnancy rate(P=0.044)and live birth rate(P=0.036)were reduced in the obese group.After logistic regression,obesity was found to be a risk factor for clinical pregnancy(OR=0.683,95%CI:0.479-0.973,P=0.035)and live birth(OR=0.662,95%CI:0.459-0.954,P=0.027).Female age was a risk factor for biochemical pregnancy,clinical pregnancy and live birth(P<0.05).Conclusion:Female obesity prolongs the duration of infertility,causes endocrine disorders,increases Gn dosage and days,and leads to poorer assisted reproductive technology outcomes.Female obesity delays the blastocyst development process and presents as a risk factor for clinical pregnancy and live birth.展开更多
OBJECTIVE To determine the effects of Danshen injectable powder on myocardial remodeling in pressure overload rats and isoproterenol(ISO) injection mice.METHODS SD Rats were subject to abdominal aortic constriction(AA...OBJECTIVE To determine the effects of Danshen injectable powder on myocardial remodeling in pressure overload rats and isoproterenol(ISO) injection mice.METHODS SD Rats were subject to abdominal aortic constriction(AAC) surgery to develop pressure overload.Therapeutic effect of Danshen injectable powder was assessed six weeks after AAC surgery.The lactic dehydrogenase(LDH) and creatine kinase(CK) levels in serum,biometric,echocardiographic parameters,interstitial fibrosis,the expression of DJ-1 and SOD2 were then measured.The myocardial impairment in mice was induced by ISO injection.LDH and CK in serum,biometric,interstitial fibrosis were measured to investigate the cardioprotective effect of Danshen injectable powder.Matrix-assisted laser desorption mass spectrometry imaging(MALDI-MSI) was used to detect the changes of 60-1000 Da molecules in mice heart tissue.RESULTS In AAC rats,we observed compensatory hypertrophy and perivascular fibrosis,however cardiac function had not progressed to deterioration.The levels of LDH and CK were decreased significantly in the Danshen injectable powder groups(P<0.05,P<0.05).Danshen injectable powder could alleviate the perivascular collagen deposits but not cardiac hypertrophy in AAC rats.Furthermore,Danshen injectable powder enhanced the expression levels of SOD2 and DJ-1 in cardio.myocytes(P<0.05,P<0.01).In ISO injection mice,the levels of HWI and LDH were decreased signifi.cantly in drug treatment group compared with model group(P<0.01,P<0.01).In the MALDI-MSI of mice heart section,Danshen injectable powder can improve the reduction of energy metabolism-related substances including adenosine,creatine and ADP induced by ISO impairment.CONCLUSION Danshen injectable powder can attenuate perivascular fibrosis and improve the expression of antioxidative stress-related proteins SOD2,DJ-1 in the rats with pressure overload-induced left ventricular remodeling.Danshen injectable powder has cardioprotective effect on ISO impairment in mice which is probably related to improvement of energy metabolism.展开更多
文摘An intramuscular injection (IMI) is an injection given directly into the central area of a specific muscle. Certain medicines need to be administered by the gluteal route for these to be effective. The aim of this study was to determine the influence of body mass index (BMI), subcutaneous fat, and muscular thickness of the dorsogluteal IMI site among healthy Japanese women. There were 39 healthy female subjects who volunteered and met the criteria. Their ages ranged from 40s to 60s (50.82 ± 6.04). With the data collected using the B-mode ultrasound images of the dorsogluteal site, it was found that the distance from the epidermis to the under-fascia (DEUF) of the gluteus maximus was dissimilar between the subject’s right and left buttocks. It was found that the distance from the epidermis to the iliac bone (DEI) was significantly more on the right than on the left buttocks. In the case of an adult Japanese woman with a BMI of 21 or more, the DEUF of the gluteus medius was found to be about 30 mm, and the DEI was approximately 50 mm or more. Based on these findings, it is recommended that a needle length of 38 mm (1.5 inches) can be safely used to administer IMIs to the gluteus medius muscle to effectively and efficiently deliver medications through the IMI route.
基金funded by the Key Program of National Natural Science Foundation of China (Grant No.51734010)the Startup Fund of Changzhou University Science Research (Grant No.ZMF22020060).
文摘Multi-gradient drilling is a new offshore drilling method.The accurate calculation of the related wellbore temperature is of great significance for the prediction of the gas hydrate formation area and the precise control of the wellbore pressure.In this study,a new heat transfer model is proposed by which the variable mass flow is properly taken into account.Using this model,the effects of the main factors influencing the wellbore temperature are analyzed.The results indicate that at the position where the separation injection device is installed,the temperature increase of the fluid in the drill pipe is mitigated due to the inflow/outflow of hollow spheres,and the temperature drop of the fluid in the annulus also decreases.In addition,a lower separation efficiency of the device,a shallower installation depth and a smaller circulating displacement tend to increase the temperature near the bottom of the annulus,thereby helping to reduce the hydrate generation area and playing a positive role in the prevention and control of hydrates in deepwater drilling.
基金supported by the National Natural Science Foundation of China (Nos.51309040,51209027, 51379025,51379033)the Open Research Fund of State Key Laboratory of Ocean Engineering (Shanghai Jiao Tong University,No.1402)+2 种基金the Young Teachers Academic Program of SWPU (No.201499010114)the Central Financial Support of Local Key Discipline Youth Fund Project (YC319)the Fundamental Research Fund for the Central Universities(No.DMU3132015089)
文摘Interaction between the injected flow from the porous wall and the main flow can reduce drag effectively.The phenomenon is significant to the flight vehicle design.The intensive flux of injection enhances difficulty of numerical simulation and requires higher demands on the turbulence model.A turbulent boundary layer flow with mass injection through a porous wall governed by Reynolds averaged Navier-Stokers(RANS)equations is solved by using the Wilcox′s k-ωturbulence model and the obtained resistance coefficient agrees well with the experimental data.The results with and without mass injection are compared with other conditions unchanged.Velocity profile,turbulent kinetic energy and turbulent eddy viscosity are studied in these two cases.Results confirm that the boundary layer is blowing up and the turbulence is better developed with the aid of mass injection,which may explain the drag reduction theoretically.This numerical simulation may deepen our comprehension on this complex flow.
基金Supported by National Natural Science Foundation of China(Grant No.51076014)Research Fund for the Doctoral Program of Higher Education of China(Grant No.20101101110011)
文摘The influence of fuel pressure fluctuation on multi-injection fuel mass deviation has been studied a lot,but the fuel pressure fluctuation at injector inlet is still not eliminated efficiently.In this paper,a new type of hydraulic filter consisting of a damping hole and a chamber is developed for elimination of fuel pressure fluctuation and multi-injection fuel mass deviation.Linear model of the improved high pressure common-rail system（HPCRS）including injector,the pipe connecting common-rail with injector and the hydraulic filter is built.Fuel pressure fluctuation at injector inlet,on which frequency domain analysis is conducted through fast Fourier transformation,is acquired at different target pressure and different damping hole diameter experimentally.The linear model is validated and can predict the natural frequencies of the system.Influence of damping hole diameter on fuel pressure fluctuation is analyzed qualitatively based on the linear model,and it can be inferred that an optimal diameter of the damping hole for elimination of fuel pressure fluctuation exists.Fuel pressure fluctuation and fuel mass deviation under different damping hole diameters are measured experimentally,and it is testified that the amplitude of both fuel pressure fluctuation and fuel mass deviation decreases first and then increases with the increasing of damping hole diameter.The amplitude of main injection fuel mass deviation can be reduced by 73%at most under pilot-main injection mode,and the amplitude of post injection fuel mass deviation can be reduced by 92%at most under main-post injection mode.Fuel mass of a single injection increases with the increasing of the damping hole diameter.The hydraulic filter proposed by this research can be potentially used to eliminate fuel pressure fluctuation at injector inlet and improve the stability of HPCRS fuel injection.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62071124)the Natural Science Foundation of Fujian Province, China (Grant No. 2020J01464)+2 种基金the Fund from the Education Department of Fujian Province, China (Grant No. JAT190013)the Fund from the Fuzhou University, China (Grant No. GXRC-19044)the Conselho Nacional de Desenvolvimento Científico e Tecnológico (BR) (CNPq) (Grant No. 309244/2018-8)
文摘Thermally induced apoptosis for tumors depends mainly on the intrinsic characteristics of biological tissues as well as treatment temperature profile during magnetic hyperthermia.Further,treatment temperature distribution inside tumor depends on the injection behavior of irregular tumors,such as the injection dose and the injection location of nanofluids.In order to improve the treatment effect,the simulated annealing algorithm is adopted in this work to optimize the nanofluid injection behavior,and the improved Arrhenius model is used to evaluate the malignant ablations for three typical malignant tumor cell models.In addition,both the injection behavior optimization and the mass diffusion of nanofluid are both taken into consideration in order to improve the treatment effect.The simulation results demonstrate that the injection behavior can be optimized effectively by the proposed optimization method before therapy,the result of which can also conduce to improving the thermal apoptosis possibility for proposed typical malignant cells.Furthermore,an effective approach is also employed by considering longer diffusion duration and correct power dissipation at the same time.The results show that a better result can then be obtained than those in other cases when the power dissipation of MNPs is set to be QMNP=5.4×10^(7)W·m^(3) and the diffusion time is 16 h.
文摘The Euler-Euler numerical method was used to investigate the effects of contraction ratio on twophase flow mixing with mass transfer in the flow injection nozzle. The geometric shape of the nozzle was modified to improve carbonation efficiency. A gas inlet hole was created to increase the flow mixing of CO2 with water. A nozzle throat was also introduced to increase the gas dissolution by increasing flow rates. Various contraction ratios of nozzle throat, inlet gas and liquid velocities, and gas bubble sizes were employed to determine their effects on gas hold-up, gas concentration, and mass transfer coefficient. Results revealed that the flow injection nozzle with high contraction ratios improved carbonation because of high gas hold-up. Gas concentration was directly related to contraction ratio and gas flow velocities. Carbonation reduced when high liquid velocities and large gas bubbles were employed because of inefficient flow mixing. This study indicated that flow injection nozzle with large contraction ratios were suitable for carbonation because of their ability to increase gas hold-up, gas concentration, and mass transfer coefficient.
文摘建立超高效液相色谱-串联质谱测定复杂水质中25种全氟/多氟化合物(PFASs)含量的分析方法。样品经直接过滤、乙腈提取或固相萃取,用Agilent Eclipse Plus C_(18)色谱柱分离,以含0.01%甲酸的甲醇溶液和水作为流动相,梯度洗脱,在电喷雾负离子模式下,采用多反应监测模式检测,用内标法定量。25种PFASs的质量浓度在0.5~100μg/L范围内与色谱峰面积线性关系良好,相关系数均大于0.999,3种样品处理方法的检出限分别为0.06~0.20、0.002~0.006μg/L和0.1~0.2 ng/L。样品加标平均回收率为69.9%~115%,测定结果的相对标准偏差为2.9%~19.6%(n=6)。该方法简单快捷、重现性好、灵敏度较高,适用于氟化工园区污水、地表水和地下水中25种PFASs的测定。
文摘The rat chimera is an important animal model for the study of complex human diseases. In the present study we evaluated the chimeric potential of rat inner cell masses （ICMs） and fetal neural stem （FNS） cells. In result, three rat chimeras were produced by day 5 （D5） Sprague-Dawley （SD） blastocysts injected with ICMs derived from day 6 （D6） and D5 Dark Agouti （DA） blastocysts; four rat chimeras had been generated by D5 DA blastocyst injected with D5 SD ICMs. For the requirement of gene modification, cultured rat inner cell mass cells were assessed to produce chimeras, but no chimeras were generated from injected embryos. The potential to generate chimeras from rFNS and transfected rFNS cells were tested, but no chimeric pups were produced. Only 2 of 41 fetuses derived from D5 DA blastocyst injection with SD LacZ transfected rFNS cells showed very low number of LacZ positive cells in the section. These results indicate that DA and SD rat ICMs arc able to contribute to chimeras, but their potential decreases significantly after culture in vitro （P〈0.05）, and rFNS cells only have the potential to contribute to early fetal development.
文摘We previously investigated the thickness of the epidermis and lengths from the skin surface to the muscle fascia and bone based on measurements taken from the ultrasonic echograms of Japanese infants aged 2, 3, 4, 5, 6, and 12 - 15 months. The appropriate needle length for intramuscular injection was 16 mm (5/8 inch) in Japanese infants at any age and site. In the present study, we examined these lengths in 21 infants with physical growth from 2 to 15 months. Average height increased from 58.5 to 73.6 cm and average body weight from 5835 to 9226 g until 15 months. The circumference of the thigh increased from 22.3 cm at 2 months to a maximum of 25.9 cm at 6 months, while that of the deltoid area was 15.2 cm at 2 months and 15.9 cm at 6 months. Subcutaneous mass (length from the skin surface to the muscle fascia) at the thigh increased between 3 and 4 months and decreased at 12 - 15 months and showed good relationship to the circumference of the thigh. Subcutaneous mass at the center of the deltoid area showed the same size until 6 months. Muscle mass (lengths from the muscle fascia to the bone) at thigh and deltoid areas remained the same until 6 months. Ultrasonic echogram is an effective tool for evaluating subcutaneous and muscle mass in young infants.
基金Hainan Provincial Science and Technology Plan(Clinical Medical Research Center)Project(No.LCYX202102)。
文摘Objective:To investigate the effects of female body mass index on embryo development and assisted reproductive technology outcomes,aiming to provide better treatment for patients with different body mass index and provide reference for clinical treatment.Methods:The study retrospectively collected data of 3783 patients who received their first fresh embryo transfer and were ovulated by a long protocol at the Reproductive Medicine Center of the First Affiliated Hospital of Hainan Medical University from January 2015 to October 2021.Patients were divided into four groups based on body mass index(BMI):low weight group,normal weight group,overweight group and obese group.The normal weight group was used as a control to compare the basic information,assisted reproductive technology process,embryo development and assisted reproductive technology outcomes between different groups.Results:Analyzing patients'basic information,we found that the duration of infertility was significantly longer in obese women(P=0.007).Basal hormone levels in the overweight and obese groups were lower than those in the normal group(P<0.05).Basal Follicle-stimulating hormone(FSH),basal Luteinizing hormone(LH),basal Estradiol(E2),basal Progesterone(P),and anti-Mullerian hormone(AMH)in the obese group were lower than the normal weight group(P<0.05),and the number of antral follicle counting(AFC)was reduced in the obese group(P=0.011).The overweight group only showed a decrease in E2 and P levels(P<0.05).During the ART,there was a significant difference in Gonadotropin(Gn)dosage among the four groups,with the obese group was the most,followed by the overweight group,and the low weight group was the least(P<0.001).Gn days were increased in the obese group(P<0.001).LH,E2,and P on trigger day were all lower in the overweight and obese groups than in the normal weight group(P<0.05).Comparing the embryo development process,we found that the blastocysts of the obese group showed delayed development at the stages of pronuclei disappearance,four-cell and blastocyst formation(P<0.05).The ART outcomes were worse in the obese group,the clinical pregnancy rate(P=0.044)and live birth rate(P=0.036)were reduced in the obese group.After logistic regression,obesity was found to be a risk factor for clinical pregnancy(OR=0.683,95%CI:0.479-0.973,P=0.035)and live birth(OR=0.662,95%CI:0.459-0.954,P=0.027).Female age was a risk factor for biochemical pregnancy,clinical pregnancy and live birth(P<0.05).Conclusion:Female obesity prolongs the duration of infertility,causes endocrine disorders,increases Gn dosage and days,and leads to poorer assisted reproductive technology outcomes.Female obesity delays the blastocyst development process and presents as a risk factor for clinical pregnancy and live birth.
文摘OBJECTIVE To determine the effects of Danshen injectable powder on myocardial remodeling in pressure overload rats and isoproterenol(ISO) injection mice.METHODS SD Rats were subject to abdominal aortic constriction(AAC) surgery to develop pressure overload.Therapeutic effect of Danshen injectable powder was assessed six weeks after AAC surgery.The lactic dehydrogenase(LDH) and creatine kinase(CK) levels in serum,biometric,echocardiographic parameters,interstitial fibrosis,the expression of DJ-1 and SOD2 were then measured.The myocardial impairment in mice was induced by ISO injection.LDH and CK in serum,biometric,interstitial fibrosis were measured to investigate the cardioprotective effect of Danshen injectable powder.Matrix-assisted laser desorption mass spectrometry imaging(MALDI-MSI) was used to detect the changes of 60-1000 Da molecules in mice heart tissue.RESULTS In AAC rats,we observed compensatory hypertrophy and perivascular fibrosis,however cardiac function had not progressed to deterioration.The levels of LDH and CK were decreased significantly in the Danshen injectable powder groups(P<0.05,P<0.05).Danshen injectable powder could alleviate the perivascular collagen deposits but not cardiac hypertrophy in AAC rats.Furthermore,Danshen injectable powder enhanced the expression levels of SOD2 and DJ-1 in cardio.myocytes(P<0.05,P<0.01).In ISO injection mice,the levels of HWI and LDH were decreased signifi.cantly in drug treatment group compared with model group(P<0.01,P<0.01).In the MALDI-MSI of mice heart section,Danshen injectable powder can improve the reduction of energy metabolism-related substances including adenosine,creatine and ADP induced by ISO impairment.CONCLUSION Danshen injectable powder can attenuate perivascular fibrosis and improve the expression of antioxidative stress-related proteins SOD2,DJ-1 in the rats with pressure overload-induced left ventricular remodeling.Danshen injectable powder has cardioprotective effect on ISO impairment in mice which is probably related to improvement of energy metabolism.
