期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
Analyses of Numerical Responses and Main Life Parameters for Determining the Suppression of Amblyseius cucumeris on Panonychus citri
1
作者 ZHANGYan-xuan LINJian-zhen +2 位作者 JIJie CHENXie KANGYu-mei 《Agricultural Sciences in China》 CAS CSCD 2005年第5期368-375,共8页
In this paper, the numeral response and main parameters of experimental population life table were analyzed for determining the suppressing ability of Amblyseius cucumeris on Panonychus citri. The result showed that: ... In this paper, the numeral response and main parameters of experimental population life table were analyzed for determining the suppressing ability of Amblyseius cucumeris on Panonychus citri. The result showed that: (1) Under 21-31°C and 1 - 9 prey densities/leaf fragment condition, the prey consumptions of A. cucumeris increased with the temperature or prey density; (2) In 1:3 predator-prey ratio treatment, the suppression of P. citri (Ro=34.0053; T=19.4369; t=3.8204) was rather weak, it was enhanced as the ratio over 5:30, and the populations of P. citri in these treatments can be fully controlled within 4-5 days; (3) Under 25±1°C, 80-85% RH and 15L: 9D illumination conditions, the net reproductive rate, mean generation duration and the time for population double increase of P. citri (Ro=34.0053; T=19.4369; t=3.8204) were higher than those of A. cucumeris (Ro=21.8750; T=16.8943; t=3.7954). While the intrinsic rate of increase and finite rate of increase of the former (rm=0.1814; λ=1.1989) were lower than those of the latter (rm=0.1826; λ=1.2004). These results indicated that A. cucumeris is a desirable bio-control agent to suppress P. citri at lower population stage in citrus orchard. 展开更多
关键词 Amblyseius cucumeris Panonychus citri Numerical response parameters of experimental population life table Biological control agent
在线阅读 下载PDF
SERVICE-AWARE BASED FUZZY ADMISSION CONTROL SCHEME IN MULTI-SERVICE NETWORKS 被引量:2
2
作者 Qiu Gongan Zhang Shunyi Liu Shidong 《Journal of Electronics(China)》 2007年第4期537-543,共7页
Multi-service aggregated transmission is the direction of IP network. Providing different Quality of Service (QoS) assurance for different services has become a crucial problem in future network. Admission control is ... Multi-service aggregated transmission is the direction of IP network. Providing different Quality of Service (QoS) assurance for different services has become a crucial problem in future network. Admission control is a vital function for multi-service IP network. This paper proposes a novel fuzzy admission control scheme based on coarse granularity service-aware technique. Different service has discriminative sensitivity to the same QoS characteristic parameter in general. The traffic class can be perceived by the service request parameter and the proposed QoS function. And requirements of dif- ferent applications can be met by maintaining the life parameter. From simulation results, the proposed scheme shows a better QoS provisioning than those traditional fuzzy logic based methods under the same admission probability. 展开更多
关键词 MULTI-SERVICE Service-aware life parameter Fuzzy logic Admission control
在线阅读 下载PDF
抗磨可靠性寿命的加速试验与预测 被引量:6
3
作者 葛世荣 索双富 《摩擦学学报》 EI CAS CSCD 北大核心 1995年第4期368-372,共5页
在工程实际中,对新机器零件的抗磨可靠性寿命进行评估或预测非常重要,但是,由于磨损是一种受多因素制约的随机过程,目前在实验室广泛采用的模拟磨损试验,不仅周期较长,而且预测误差也比较大.因此,提出了一种在保持磨损机理相似... 在工程实际中,对新机器零件的抗磨可靠性寿命进行评估或预测非常重要,但是,由于磨损是一种受多因素制约的随机过程,目前在实验室广泛采用的模拟磨损试验,不仅周期较长,而且预测误差也比较大.因此,提出了一种在保持磨损机理相似的前提下合理选用高PV值的抗磨可靠性寿命加速试验的新方法.根据可靠性设计原理和抗磨可靠性数值计算,着重研究了滑动磨损的多样品抗磨可靠性寿命的加速试验方法,包括加速系数的确定、抗磨寿命分布参数的估计、抗磨可靠性寿命的预测及其置信度的估计等. 展开更多
关键词 滑动磨损 抗磨寿命 可靠性 试验 机械元件
在线阅读 下载PDF
面向机械产品的全生命周期设计系统初步开发 被引量:1
4
作者 赵风雷 《新技术新工艺》 2009年第9期48-51,共4页
利用特征技术和数据库技术实现了机械产品生命周期设计(LCD)系统与CAD系统的集成,建立了零件、产品特征参数化设计所需的零件特征库,开发了特征参数化设计模块,并利用灰色GM(1,1)模型预测寿命指标。此系统能及时地根据评价的结果对设计... 利用特征技术和数据库技术实现了机械产品生命周期设计(LCD)系统与CAD系统的集成,建立了零件、产品特征参数化设计所需的零件特征库,开发了特征参数化设计模块,并利用灰色GM(1,1)模型预测寿命指标。此系统能及时地根据评价的结果对设计方案进行修改,对产品寿命做出预测,避免了设计-试验-修改-再设计的重复过程,使整个的产品开发周期缩短,设计成本大大降低。本系统建立的信息模型可以用在产品的各个阶段,能够体现生命周期中有价值的信息,实现了设计分析自动化。 展开更多
关键词 机械产品 全生命周期设计 生命周期评价 参数化设计
在线阅读 下载PDF
某典型折叠机构的磨损寿命研究及优化
5
作者 张娟 张磊 +1 位作者 温志勋 李祚军 《科学技术与工程》 北大核心 2012年第32期8588-8591,共4页
针对航空航天柔性机构具有复杂非线性的特点,提出一种在多软件平台下建立柔性机构模型并进行运动学仿真的方法。对某典型折叠机构进行参数化建模及运动学分析,并采用不同可靠性分析方法对折叠机构进行可靠性分析和磨损寿命分析。最后对... 针对航空航天柔性机构具有复杂非线性的特点,提出一种在多软件平台下建立柔性机构模型并进行运动学仿真的方法。对某典型折叠机构进行参数化建模及运动学分析,并采用不同可靠性分析方法对折叠机构进行可靠性分析和磨损寿命分析。最后对机构进行磨损寿命优化。优化结果显示机构最大应力水平显著降低,磨损寿命显著提高。 展开更多
关键词 折叠机构 参数化建模 可靠性分析 磨损寿命 优化
在线阅读 下载PDF
Sublethal Effects of Metaflumizone on Plutella xylostella (Lepidoptera: Plutellidae) 被引量:3
6
作者 ZHANG Zhe LI Jian-hong GAO Xi-wu 《Journal of Integrative Agriculture》 SCIE CAS CSCD 2012年第7期1145-1150,共6页
Metaflumizone is a novel sodium channel blocker insecticide, which has been registered for controling the diamondback moth (DBM), Plutella xylostella (Lepidoptera: Plutellidae) in China. It is unavoidable for DBM... Metaflumizone is a novel sodium channel blocker insecticide, which has been registered for controling the diamondback moth (DBM), Plutella xylostella (Lepidoptera: Plutellidae) in China. It is unavoidable for DBMs to be exposed to sublethal dose of metaflumizone in brassicaceous vegetable field. Sublethal effects of metaflumizone at LC15 (1.06 mg L-1) and LCz5 (2.03 mg L-1) on the biological characteristics were investigated. Pupation rate, pupal period and pupal weight were significantly declined comparing with the control (P=0.05) when third instar larvae were exposed to LC15 and LC25 of metaflumizone. Comparing the control group to LC15 and LC25 treatment groups, there were significant differences in the development periods of eggs, first instar larvae, pupae and total preoviposition period. The peak of age-specific fecundity in LC15 and LC25 treatment groups was lagged behind control group. Mean values of intrinsic rate of increase (rm), net reproductive rate (R0) and finite rate of increase (λ) observed from the LCl5 and LC25 treatment groups were lower than those from the control group. But mean values of gross reproduction rate (GRR) was not different. The mean generation time (T) of the treatment groups was prolonged. Whether sublethal doses of metaflumizone could stimulate reproduction in the long term needs further investigation on continuous generations. 展开更多
关键词 Plutella xylostella METAFLUMIZONE sublethal dose life table parameters
在线阅读 下载PDF
BIM技术在复杂异形幕墙上的应用研究 被引量:1
7
作者 唐友武 靳凯明 +1 位作者 蔡燕君 阎玉芹 《建设科技》 2023年第17期78-81,共4页
随着建筑行业的不断发展,商业建筑的外观及结构日趋复杂新颖化,给此类建筑的设计及施工均带来很大的难题。本文介绍了BIM技术在复杂异形幕墙上的全生命周期应用,结合山东省大数据产业基地A#楼实际幕墙工程,详细研究了BIM技术在安装、施... 随着建筑行业的不断发展,商业建筑的外观及结构日趋复杂新颖化,给此类建筑的设计及施工均带来很大的难题。本文介绍了BIM技术在复杂异形幕墙上的全生命周期应用,结合山东省大数据产业基地A#楼实际幕墙工程,详细研究了BIM技术在安装、施工阶段的具体应用,解决了幕墙工程以往常规技术棘手的问题,以期为设计及施工人员提供参考。 展开更多
关键词 BIM技术 幕墙设计 全生命周期 参数化
在线阅读 下载PDF
涡轮叶片的网格参数化方法及其寿命可靠性优化
8
作者 雷婧宇 雷倩楠 +1 位作者 李红宾 贾贝熙 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2023年第10期2651-2659,共9页
涡轮叶片的寿命可靠性优化对保障发动机安全,提高发动机使用寿命具有重要意义。传统的确定性优化由于没有考虑不确定性因素的影响,其结果往往导致结构可靠性低,严重威胁发动机的安全。针对复杂的含气膜孔几何变量的涡轮叶片几何构型,提... 涡轮叶片的寿命可靠性优化对保障发动机安全,提高发动机使用寿命具有重要意义。传统的确定性优化由于没有考虑不确定性因素的影响,其结果往往导致结构可靠性低,严重威胁发动机的安全。针对复杂的含气膜孔几何变量的涡轮叶片几何构型,提出局部参数化网格变形方法,在关注的叶片前缘部分采用六面体网格,并利用局部网格变形法实现其参数化变形,其他部分采用四面体网格,以缩短其网格划分时间,提高其网格划分效率。所提方法实现了不确定条件下的含气膜孔几何变量涡轮叶片的寿命可靠性优化,在满足可靠性约束和几何约束的条件下,使得涡轮叶片基于不确定性的寿命均值提高了18.36%。 展开更多
关键词 涡轮叶片 气膜孔 网格参数化 多模式耦合寿命 可靠性优化
在线阅读 下载PDF
Comparative life table analysis of Tetranychus urticae (Acari Tetranychidae) on 14 soybean genotypes 被引量:5
9
作者 Amin Sedaratian Yaghoub Fathipour Saeid Moharramipour 《Insect Science》 SCIE CAS CSCD 2011年第5期541-553,共13页
The life table parameters of two-spotted spider mite (TSSM), Tetranychus urticae Koch, on 14 soybean genotypes (Sari, Sahar, Tellar, Zane, Ks3494, LI7, Dpx, 032, 033, Clark, Hill, 127, Tms and Williams) were evalu... The life table parameters of two-spotted spider mite (TSSM), Tetranychus urticae Koch, on 14 soybean genotypes (Sari, Sahar, Tellar, Zane, Ks3494, LI7, Dpx, 032, 033, Clark, Hill, 127, Tms and Williams) were evaluated at 28 ±1℃, 65% ± 5% RH and a photoperiod of 16 : 8 h L : D. The survivorship data (lx) of adult females were fitted to the Weibull frequency distribution model in all genotypes tested. Based on the Weibull parameters, the survival curve was type I on all genotypes, which indicated that the mortality mostly occurred in old individuals. Furthermore, two mathematical models (Analytis and Enkegaard) were fitted to age-specific fecundity data (mx). The highest intrinsic rate of increase (rm) was recorded on L17 (0.392) and the lowest values of this parameter were obtained on Tms (0.233), Hill (0.236), 032 (0.236), 127 (0.237) and Clark (0.240). In addition, net reproductive rate (R0) and finite rate of increase (λ) of the TSSM had the highest value on L17 as 45.521 and 1.475, respectively. The lowest values of these parameters were recorded on Tms as 12.149 and 1.258, respectively. Doubling time (DT) varied significantly on different genotypes and the shortest and longest values of this period were obtained on L17 and 032, respectively. Our findings revealed that Tms, Hill, 032, 127 and Clark were less suitable genotypes, suggesting that they are more resistant to the TSSM than the other genotypes. 展开更多
关键词 FECUNDITY life table parameters RESISTANCE SOYBEAN two-spotted spider mite
原文传递
Multiaxial fatigue life prediction of composite materials 被引量:7
10
作者 Jingmeng WENG Weidong WEN Hongjian ZHANG 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2017年第3期1012-1020,共9页
In order to analyze the stress and strain fields in the fibers and the matrix in composite materials,a fiber-scale unit cell model is established and the corresponding periodical boundary conditions are introduced.Ass... In order to analyze the stress and strain fields in the fibers and the matrix in composite materials,a fiber-scale unit cell model is established and the corresponding periodical boundary conditions are introduced.Assuming matrix cracking as the failure mode of composite materials,an energy-based fatigue damage parameter and a multiaxial fatigue life prediction method are established.This method only needs the material properties of the fibers and the matrix to be known.After the relationship between the fatigue damage parameter and the fatigue life under any arbitrary test condition is established,the multiaxial fatigue life under any other load condition can be predicted.The proposed method has been verified using two different kinds of load forms.One is unidirectional laminates subjected to cyclic off-axis loading,and the other is filament wound composites subjected to cyclic tension-torsion loading.The fatigue lives predicted using the proposed model are in good agreements with the experimental results for both kinds of load forms. 展开更多
关键词 Fatigue damage parameter Finite element analysis life prediction Multiaxial fatigue Periodical boundary condition
原文传递
涡轮冷却叶片寿命可靠性分析参数化仿真平台 被引量:11
11
作者 贾贝熙 吕震宙 雷婧宇 《航空学报》 EI CAS CSCD 北大核心 2021年第12期218-230,共13页
目前,涡轮冷却叶片等复杂结构的多模式寿命可靠性分析中存在各功能模块的集成与管理不成体系、参数化联合调用技术不完善的工程应用问题。针对这些问题,完善了随机不确定性下涡轮冷却叶片多模式寿命可靠性分析的工程化方法,搭建了多模... 目前,涡轮冷却叶片等复杂结构的多模式寿命可靠性分析中存在各功能模块的集成与管理不成体系、参数化联合调用技术不完善的工程应用问题。针对这些问题,完善了随机不确定性下涡轮冷却叶片多模式寿命可靠性分析的工程化方法,搭建了多模式寿命可靠性分析的参数化、多软件联合仿真平台,为某型号叶片寿命可靠性分析提供合理的工程化方法及高效便捷的自动化实现工具。主要工作包括:一建立了不确定性环境下含孔、肋及空腔复杂结构网格划分和结构有限元仿真的参数化方法,实现了随机变量不同取值下仿真的自动执行,解决了可靠性理论方法应用至复杂工程结构的瓶颈问题;二在经回归处理的概率寿命曲线中考虑温度插值及多失效模式串联系统,拓展了概率寿命曲线的应用范围,使得所建涡轮叶片寿命可靠性模型更符合实际;三提出了可靠性分析数字模拟过程中嵌入包括有限元结构分析和疲劳寿命极限状态面两方面的双层自适应代理模型方法,该自适应策略可在保证寿命可靠性分析精度的基础上提高效率。通过所建平台在某型号叶片上的算例分析及与蒙特卡洛法参考解的对比,验证了所提多模式系统寿命可靠性分析工程化方法的高效和准确性及仿真平台的实用性。 展开更多
关键词 涡轮冷却叶片 参数化联合仿真平台 多模式疲劳寿命概率模型 可靠性分析 代理模型
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部