Assessing the behaviour and concentration of waste pollutants deposited between two parallel plates is essential for effective environmental management.Determining the effectiveness of treatment methods in reducing po...Assessing the behaviour and concentration of waste pollutants deposited between two parallel plates is essential for effective environmental management.Determining the effectiveness of treatment methods in reducing pollution scales is made easier by analysing waste discharge concentrations.The waste discharge concentration analysis is useful for assessing how effectively wastewater treatment techniques reduce pollution levels.This study aims to explore the Casson micropolar fluid flow through two parallel plates with the influence of pollutant concentration and thermophoretic particle deposition.To explore the mass and heat transport features,thermophoretic particle deposition and thermal radiation are considered.The governing equations are transformed into ordinary differential equations with the help of suitable similarity transformations.The Runge-Kutta-Fehlberg’s fourthfifth order technique and shooting procedure are used to solve the reduced set of equations and boundary conditions.The integration of a neural network model based on the Levenberg-Marquardt algorithm serves to improve the accuracy of predictions and optimize the analysis of parameters.Graphical outcomes are displayed to analyze the characteristics of the relevant dimensionless parameters in the current problem.Results reveal that concentration upsurges as the micropolar parameter increases.The concentration reduces with an upsurge in the thermophoretic parameter.An upsurge in the external pollutant source variation and the local pollutant external source parameters enhances mass transport.The surface drag force declines for improved values of porosity and micropolar parameters.展开更多
Intrapancreatic fat deposition(IPFD)has garnered increasing attention in recent years.The prevalence of IPFD is relatively high and associated with factors such as obesity,age,and sex.However,the pathophysiological me...Intrapancreatic fat deposition(IPFD)has garnered increasing attention in recent years.The prevalence of IPFD is relatively high and associated with factors such as obesity,age,and sex.However,the pathophysiological mechanisms underlying IPFD remain unclear,with several potential contributing factors,including oxida-tive stress,alterations in the gut microbiota,and hormonal imbalances.IPFD was found to be highly correlated with the occurrence and prognosis of exocrine pan-creatic diseases.Although imaging techniques remain the primary diagnostic approach for IPFD,an expanding array of biomarkers and clinical scoring systems have been identified for screening purposes.Currently,effective treatments for IPFD are not available;however,existing medications,such as glucagon-like peptide-1 receptor agonists,and new therapeutic approaches explored in animal models have shown considerable potential for managing this disease.This paper reviews the pathogenesis of IPFD,its association with exocrine pancreatic disea-ses,and recent advancements in its diagnosis and treatment,emphasizing the significant clinical relevance of IPFD.展开更多
Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aq...Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.展开更多
Suppressing the coffee ring effect(CRE)of an aqueous suspension through manipulation without affecting the remaining deposit is highly desirable for practical applications;however,this is extremely challenging.Here,we...Suppressing the coffee ring effect(CRE)of an aqueous suspension through manipulation without affecting the remaining deposit is highly desirable for practical applications;however,this is extremely challenging.Here,we demonstrate CRE suppression with undetectable disturbance of the deposit on carbon-based surfaces.This was achieved by adding ammonium bicarbonate(NH4HCO_(3)),which benefits from the dissociation of NH_(4)HCO_(3) to produce NH_(4)^(+),as well as its decomposition into NH_(3) and CO_(2) molecules.Surprisingly,NH_(4)^(+) can also function as Na^(+)/K^(+)to suppress the CRE through cation interactions,although its hydrate state is only partially positively charged.Moreover,we successfully applied this approach to enhance the morphology,resistance,and color uniformity of deposits of graphene oxide quantum dots,conductive inks,and organic dyes,respectively.This study provides a practical strategy for improving the performance of fabricated devices and paves the way for the development of high-accuracy manufacturing techniques in diverse industries.展开更多
The polar layered deposits(PLD) of Mars can provide deep insight into paleoclimate changes over the planet's last several million years. Since the 1960s, researchers have studied almost all aspects of Martian PLD ...The polar layered deposits(PLD) of Mars can provide deep insight into paleoclimate changes over the planet's last several million years. Since the 1960s, researchers have studied almost all aspects of Martian PLD properties, searching for patterns that might reveal periodic characteristics of the planet's climate history. Although much progress has been made in our understanding of orbital periodicities reflected in the PLD, questions remain regarding how Martian orbital changes have affected the formation of the PLD and regarding the extent of climate information that is recorded in the PLD. Future studies of PLD should be carried out via integrated research that targets multi-profiles throughout the entire Martian polar regions that would clarify their general features at the hemisphere scale. Numerical modeling, coupled with modern observations of dust and water vapor transportation, should greatly advance our understanding of planetary climate evolution. Furthermore, future landing missions may help to clarify the paleoclimatic characteristics reflected in the PLD by drilling into these layered deposits and measuring mineralogical and geochemical compositions of the drilled samples.展开更多
The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control...The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.展开更多
The layer-by-layer deposition strategy of additive manufacturing makes it ideal to fabricate dissimilar alloy components with varying functionality,which has promising application potential in a large number of indust...The layer-by-layer deposition strategy of additive manufacturing makes it ideal to fabricate dissimilar alloy components with varying functionality,which has promising application potential in a large number of industrial areas.In this study,two components composed of ERCuAl-A2 aluminum bronze(CuAl9)and Inconel 718 nickel-based superalloy were fabricated with different deposition orders by wire-arc directed energy deposition.Subject to changes in heat input and thermophysical properties of the substrate,the transition region of the deposited Cu-Ni component with the bottom half of CuAl9 and the top half of Inconel 718 is narrow and serrated.This region features a laminated intermetallic compound layer due to the convection and rapid cooling in the molten pool.In contrast,the Ni-Cu component deposited in the opposite order exhibits a 2 mm gradient transition zone.Within this region,a large number of diverse precipitates were found as well as regional variations in grain size due to the multi-layer partial remelting.Both two components show strong bonds and their tensile specimens tested along the vertical direction always fracture at the softer CuAl9 side.Excellent tensile properties along the horizontal direction were obtained for Cu-Ni(Ultimate tensile strength:573 MPa,yield stress:302 MPa,elongation:22%),while those of Ni-Cu are much lower due to the existence of the solidification cracks in the transition zone.The results from this study provide a reference for the additive manufacturing of Cu/Ni dissimilar alloy components,as well as their microstructure and mechanical properties control.展开更多
Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb...Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.展开更多
Lithium metal batteries(LMBs)with high energy density are impeded by the instability of solid electrolyte interface(SEI)and the uncontrolled growth of lithium(Li)dendrite.To mitigate these challenges,optimizing the SE...Lithium metal batteries(LMBs)with high energy density are impeded by the instability of solid electrolyte interface(SEI)and the uncontrolled growth of lithium(Li)dendrite.To mitigate these challenges,optimizing the SEI structure and Li deposition behavior is the key to stable LMBs.This study novelty proposes a facile synthesis of MgF_(2)/carbon(C)nanocomposite through the mechanochemical reaction between metallic Mg and polytetrafluoroethylene(PTFE)powders,and its modified polypropylene(PP)separator enhances LMB performance.The in-situ formed highly conductive fluorine-doped C species play a crucial role in facilitating ion/electron transport,thereby accelerating electrochemical kinetics and altering Li deposition direction.During cycling,the in-situ reaction between MgF_(2)and Li leads to the formation of LiMg alloy,along with a LiF-rich SEI layer,which reduces the nucleation overpotential and reinforces the interphase strength,leading to homogeneous Li deposition with dendrite-free feature.Benefiting from these merits,the Li metal is densely and uniformly deposited on the MgF_(2)/C@PP separator side rather than on the current collector side.Furthermore,the symmetric cell with MgF_(2)/C@PP exhibits superb Li plating/stripping performance over 2800 h at 1 mA cm^(-2)and 2 mA h cm^(-2).More importantly,the assembled Li@MgF_(2)/C@PPILiFePO4full cell with a low negative/positive ratio of 3.6delivers an impressive cyclability with 82.7%capacity retention over 1400 cycles at 1 C.展开更多
Unraveling the precise mineralization age is vital to understand the geodynamic setting and ore-forming mechanism of the sediment-hosted Pb-Zn deposit;this has long been a challenge.The Sichuan-Yunnan-Guizhou(SYG)tria...Unraveling the precise mineralization age is vital to understand the geodynamic setting and ore-forming mechanism of the sediment-hosted Pb-Zn deposit;this has long been a challenge.The Sichuan-Yunnan-Guizhou(SYG)triangle in the southwestern margin of the Yangtze Block is a globally recognized carbonate-hosted Pb-Zn metallogenic province and also an essential part of the South China low-temperature metallogenic domain.This region has>30 million tons(Mt)Zn and Pb resources and shows the enrichment of dispersed metals,such as Ga,Ge,Cd,Se,and Tl.During the past 2 decades,abundant data on mineralization ages of Pb-Zn deposits within the SYG triangle have been documented based on various radioisotopic dating methods,resulting in significant progress in understanding the geodynamic background and ore formation of Pb-Zn deposits hosted in sedimentary rocks at SYG triangle.This paper provides a comprehensive summary of the geochronological results and Pb-Sr isotopic data regarding Pb-Zn deposits in the SYG triangle,which identified two distinct Pb-Zn mineralization periods influencing the dynamic processes associated with the expansion and closure of the Paleo-Tethys Ocean in the western margin of the Yangtze Block.The predominant phase of Pb-Zn mineralization at SYG triangle spanned from the Middle Triassic to Early Jurassic(226-191 Ma),which was intensely correlated with the large-scale basin fluid transport triggered by the closure of the Paleo-Tethys Ocean and Indosinian orogeny.The secondary Pb-Zn mineralization phase occurred during the Late Devonian to Late Carboniferous and was controlled by extensional structures associated with the expansion of the Paleo-Tethys Ocean.Further investigation is necessary to clarify the occurrence and potential factors involved in the Pb-Zn mineralization events during the Late Devonian to Late Carboniferous.展开更多
The Guanfang large-scale W deposit is located in the W polymetallic ore concentration area of Bozhushan in southeastern Yunnan,China.Despite extensive research,the fluid evolution process of the deposit remains ambigu...The Guanfang large-scale W deposit is located in the W polymetallic ore concentration area of Bozhushan in southeastern Yunnan,China.Despite extensive research,the fluid evolution process of the deposit remains ambiguous,leading to controversy regarding its genesis.This study conducted a detailed field geological survey,with systematic sampling of the KT6 orebody,to delineate mineralization stages.Fine mineralogy work,including the use of CL images of scheelite,in-situ LA-ICP-MS trace elements,and Sr isotopes,was carried out on diff erent generations of scheelite formed in various stages.The findings identified the evolution of fluids in the mineralization process,shedding light on the genesis of the deposit.The study revealed four mineralization stages at the Guanfang W deposit:prograde skarn stage,retrograde skarn stage,quartz-sulfide stage,and carbonate-fluorite stage.Diff erent generations of scheelite(Sch I,Sch II,Sch III)were observed in the first three stages,displaying distinct chondrite-normalized REE patterns.The REE of Sch I mainly substituted into the Ca site by REE^(3+)+□_(Ca),and there may be a similar substitution of Nb for REE,whereas it is not the main substitution method.The REE of Sch II mainly enter the scheelite lattice in the form of REE 3++Na+,and there may be a substitution of Nb for REE isomorphism.In the early stage,The REE of Sch III was mainly replaced by Nb for REE isomorphism,while in the later stage,the replacement mode of REE^(3+)+□_(Ca)coexisted with it.The Mo content in scheelite,along with the corresponding Eu anomalies in both scheelite and garnet,collectively imply that the ore-forming fluids during various mineralization stages were predominantly oxidizing,with only slight reducibility observed in Sch II.The in-situ Sr isotope ratios of scheelite concentrates ranged from 0.7093 to 0.7153,resembling those of the Bozhushan granite,indicating a relationship between W mineralization and granite.In addition,the Y/Ho ratios of scheelite from various mineralization stages exhibit a narrow range(19-31),with a pronounced correlation between the contents of Y and Ho and a similar trend in their variation.This consistency suggests that the Guanfang deposit has undergone a uniform or comparable evolutionary process,implying a stable ore-forming fluid across diff erent mineralization stages.展开更多
The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severel...The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severely hindered the practical application of Li in constructing high energy-density Li metal batteries(LMBs).Herein,a novel Li host(3D ZnO/CNTs/Cu)featuring ordered microchannels and lithiophilic ZnO species on the inner walls of the microchannels is introduced,which induces the uniform Li^(+) deposition into the microchannels and finally suppresses the formation of Li dendrites.The stable structure of the fabricated 3D Li host can adapt to volume variations upon Li^(+) plating/stripping,thereby enhancing electrochemical performances.Symmetric cells with the 3D ZnO/CNTs/Cu@Li anode exhibited long cycle stability at areal current densities of 0.5 and 2 mA cm^(-2);Full cells maintained a reversible discharge capacity of 105 mAh g^(-1) after 400 cycles at 1C with a capacity retention of 70%.Meanwhile,ex-situ SEM observations proved that the 3D ZnO/CNTs/Cu@Li anode can keep the structural integrity during charging/discharging(or plating/stripping).This work suggested that lithiophilic nanochannels in the Li host can significantly improve the electrochemical performance and safety of LMBs.展开更多
Synchrotron method of resonant X-ray reflectivity 2D mapping has been applied to study ultrathin epitaxial layers of WS_(2)grown by pulsed laser deposition on Al_(2)O_(3)(0001)substrates.The measurements were carried ...Synchrotron method of resonant X-ray reflectivity 2D mapping has been applied to study ultrathin epitaxial layers of WS_(2)grown by pulsed laser deposition on Al_(2)O_(3)(0001)substrates.The measurements were carried out across the L absorption edge of tungsten to perform depth-dependent element-selective analysis sensitive to potential chemical modification of the WS_(2)layer in ambient conditions.Despite the few monolayer thickness of the studied film,the experimentally measured maps of reflectance as a function of incident angle and photon energy turned out to be quite informative showing well-pronounced interference effects near W absorption edge at 10210 eV.The synchrotron studies were complemented with conventional non-resonant reflectance measurements carried out in the laboratory at a fixed photon energy corresponding to Cu Kαemission.The reconstruction of the depth and energy dependent scattering length density within the studied multilayers was carried out using the OpenCL empowered fitting software utilizing spectral shaping algorithm which does not rely on the pre-measured reference absorption spectra.A thin WO_(x) layer has been revealed at the surface of the WS_(2)layer pointing out to the effect of water assisted photo-oxidation reported in a number of works related to ultrathin layers of transition metal dichalcogenides.展开更多
Owing to the lack of matching commercial welding wires,the development of wire arc additive manufacturing(WAAM)for most aluminum alloys is hindered.A wire-powder synchronous arc additive manufacturing(WPAAM)was propos...Owing to the lack of matching commercial welding wires,the development of wire arc additive manufacturing(WAAM)for most aluminum alloys is hindered.A wire-powder synchronous arc additive manufacturing(WPAAM)was proposed to prepare the target Al-Si-Mg aluminum alloy.Based on the synchronous deposition of AlSi_(12) wire and pure Mg powder,the deposition width of the WPAAMed thin-wall was increased by 61% compared with that of WAAMed thin-wall using AlSi_(12) wire,and the machining allowance was reduced by 81%.The added Mg powder benefited to form refined equiaxed grains,and reduced the average grain size of the WPAAMed thin-wall to 47.1μm,showing a decrease of 23.8% relatively to that of the WAAMed thin-wall.Besides,Mg reacted with Si to form Mg_(2)Si strengthening phases.The mechanical properties tests showed that the ultimate tensile strength and elongation of the WPAAMed thin-wall increased up to 174.5 MPa and 4.1%,reaching 92% and 60% those of the WAAMed thin-wall,respectively.展开更多
Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality...Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality.It is essential to understand the underlying printability of different material combinations based on an adapted process.Here,the printability disparities of two common and attractive material combinations(nickel-and iron-based alloys)are evaluated at the macro and micro levels via laser directed energy deposition(DED).The deposition processes were captured using in situ high-speed imaging,and the dissimilarities in melt pool features and track morphology were quantitatively investigated within specific process windows.Moreover,the microstructure diversity of the tracks and blocks processed with varied material pairs was comparatively elaborated and,complemented with the informative multi-physics modeling,the presented non-uniformity in mechanical properties(microhardness)among the heterogeneous material pairs was rationalized.The differences in melt flow induced by the unlike thermophysical properties of the material pairs and the resulting element intermixing and localized re-alloying during solidification dominate the presented dissimilarity in printability among the material combinations.This work provides an in-depth understanding of the phenomenological differences in the deposition of dissimilar materials and aims to guide more reliable DED forming of bimetallic parts.展开更多
This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double...This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.展开更多
In grain crops such as maize(Zea mays),leaf angle(LA)is a key agronomic trait affecting light interception and thus planting density and yield.Nitrogen(N)affects LA in plants,but we lack a good understanding of how N ...In grain crops such as maize(Zea mays),leaf angle(LA)is a key agronomic trait affecting light interception and thus planting density and yield.Nitrogen(N)affects LA in plants,but we lack a good understanding of how N regulates LA.Here,we report that N deficiency enhanced lignin deposition in the ligular region of maize seedlings.In situ hybridization showed that the bZIP transcription factor gene ZmbZIP27 is mainly expressed in the phloem of maize vascular bundles.Under N-sufficient conditions,transgenic maize overexpressing ZmbZIP27 showed significantly smaller LA compared with wild type(WT).By contrast,zmbzip27_(ems)mutant showed larger LA under both N-deficient and N-sufficient conditions compared with WT.Overexpression of ZmbZIP27 enhanced lignin deposition in the ligular region of maize in the field.We further demonstrated that ZmbZIP27 could directly bind the promoters of the microRNA genes ZmMIR528a and ZmMIR528b and negatively regulate the expression levels of ZmmiR528.ZmmiR528 knockdown transgenic maize displayed erect architecture in the field by increasing lignin content in the ligular region of maize.Taken together,these results indicate that ZmbZIP27 regulates N-mediated LA size by regulating the expression of ZmmiR528 and modulating lignin deposition in maize.展开更多
Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-di...Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.展开更多
Natural gas hydrate(NGH)can cause pipeline blockages during the transportation of oil and gas under high pressures and low temperatures.Reducing hydrate adhesion on pipelines is viewed as an efficient way to prevent N...Natural gas hydrate(NGH)can cause pipeline blockages during the transportation of oil and gas under high pressures and low temperatures.Reducing hydrate adhesion on pipelines is viewed as an efficient way to prevent NGH blockages.Previous studies suggested the water film can greatly increase hydrate adhesion in gas-dominant system.Herein,by performing the molecular dynamics simulations,we find in water-dominant system,the water film plays different roles in hydrate deposition on Fe and its corrosion surfaces.Specifically,due to the strong affinity of water on Fe surface,the deposited hydrate cannot convert the adsorbed water into hydrate,thus,a water film exists.As water affinities decrease(Fe>Fe_(2)O_(3)>FeO>Fe_(3)O_(4)),adsorbed water would convert to amorphous hydrate on Fe_(2)O_(3)and form the ordered hydrate on FeO and Fe_(3)O_(4)after hydrate deposition.While absorbed water film converts to amorphous or to hydrate,the adhesion strength of hydrate continuously increases(Fe<Fe_(2)O_(3)<FeO<Fe_(3)O_(4)).This is because the detachment of deposited hydrate prefers to occur at soft region of liquid layer,the process of which becomes harder as liquid layer vanishes.As a result,contrary to gas-dominant system,the water film plays the weakening roles on hydrate adhesion in water-dominant system.Overall,our results can help to better understand the hydrate deposition mechanisms on Fe and its corrosion surfaces and suggest hydrate deposition can be adjusted by changing water affinities on pipeline surfaces.展开更多
Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at th...Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.展开更多
文摘Assessing the behaviour and concentration of waste pollutants deposited between two parallel plates is essential for effective environmental management.Determining the effectiveness of treatment methods in reducing pollution scales is made easier by analysing waste discharge concentrations.The waste discharge concentration analysis is useful for assessing how effectively wastewater treatment techniques reduce pollution levels.This study aims to explore the Casson micropolar fluid flow through two parallel plates with the influence of pollutant concentration and thermophoretic particle deposition.To explore the mass and heat transport features,thermophoretic particle deposition and thermal radiation are considered.The governing equations are transformed into ordinary differential equations with the help of suitable similarity transformations.The Runge-Kutta-Fehlberg’s fourthfifth order technique and shooting procedure are used to solve the reduced set of equations and boundary conditions.The integration of a neural network model based on the Levenberg-Marquardt algorithm serves to improve the accuracy of predictions and optimize the analysis of parameters.Graphical outcomes are displayed to analyze the characteristics of the relevant dimensionless parameters in the current problem.Results reveal that concentration upsurges as the micropolar parameter increases.The concentration reduces with an upsurge in the thermophoretic parameter.An upsurge in the external pollutant source variation and the local pollutant external source parameters enhances mass transport.The surface drag force declines for improved values of porosity and micropolar parameters.
基金Supported by National Natural Science Foundation of China,No.82170651and the Research Support Fund of Hubei Microcirculation Society,No.HBWXH2024(1)-1.
文摘Intrapancreatic fat deposition(IPFD)has garnered increasing attention in recent years.The prevalence of IPFD is relatively high and associated with factors such as obesity,age,and sex.However,the pathophysiological mechanisms underlying IPFD remain unclear,with several potential contributing factors,including oxida-tive stress,alterations in the gut microbiota,and hormonal imbalances.IPFD was found to be highly correlated with the occurrence and prognosis of exocrine pan-creatic diseases.Although imaging techniques remain the primary diagnostic approach for IPFD,an expanding array of biomarkers and clinical scoring systems have been identified for screening purposes.Currently,effective treatments for IPFD are not available;however,existing medications,such as glucagon-like peptide-1 receptor agonists,and new therapeutic approaches explored in animal models have shown considerable potential for managing this disease.This paper reviews the pathogenesis of IPFD,its association with exocrine pancreatic disea-ses,and recent advancements in its diagnosis and treatment,emphasizing the significant clinical relevance of IPFD.
基金partially supported by the National Natural Science Foundation of China(22479022)Liaoning Revitalization Talents Program(XLYC2007129)。
文摘Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.
基金National Natural Science Foundation of China under Grant No.12005062(SS).National Natural Science Foundation of China under Grant No.11974366(HF).National Natural Science Foundation of China under Grant No.U1632135(HY)Fundamental Research Funds for the Central Universities,China(HF)。
文摘Suppressing the coffee ring effect(CRE)of an aqueous suspension through manipulation without affecting the remaining deposit is highly desirable for practical applications;however,this is extremely challenging.Here,we demonstrate CRE suppression with undetectable disturbance of the deposit on carbon-based surfaces.This was achieved by adding ammonium bicarbonate(NH4HCO_(3)),which benefits from the dissociation of NH_(4)HCO_(3) to produce NH_(4)^(+),as well as its decomposition into NH_(3) and CO_(2) molecules.Surprisingly,NH_(4)^(+) can also function as Na^(+)/K^(+)to suppress the CRE through cation interactions,although its hydrate state is only partially positively charged.Moreover,we successfully applied this approach to enhance the morphology,resistance,and color uniformity of deposits of graphene oxide quantum dots,conductive inks,and organic dyes,respectively.This study provides a practical strategy for improving the performance of fabricated devices and paves the way for the development of high-accuracy manufacturing techniques in diverse industries.
基金supported financially by the Key Research Program of the Institute of Geology and Geophysics, CAS (Grant No. IGGCAS-202102 and IGGCAS-201905)。
文摘The polar layered deposits(PLD) of Mars can provide deep insight into paleoclimate changes over the planet's last several million years. Since the 1960s, researchers have studied almost all aspects of Martian PLD properties, searching for patterns that might reveal periodic characteristics of the planet's climate history. Although much progress has been made in our understanding of orbital periodicities reflected in the PLD, questions remain regarding how Martian orbital changes have affected the formation of the PLD and regarding the extent of climate information that is recorded in the PLD. Future studies of PLD should be carried out via integrated research that targets multi-profiles throughout the entire Martian polar regions that would clarify their general features at the hemisphere scale. Numerical modeling, coupled with modern observations of dust and water vapor transportation, should greatly advance our understanding of planetary climate evolution. Furthermore, future landing missions may help to clarify the paleoclimatic characteristics reflected in the PLD by drilling into these layered deposits and measuring mineralogical and geochemical compositions of the drilled samples.
基金financial support from the National Natural Science Foundation of China(Grant No.41941018).
文摘The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.
基金supported by the Key Research and Development Program of Shaanxi Province(2023-YBGY361)the National Natural Science Foundation of China(52275374 and 52205414)+1 种基金the Postdoctoral Fellowship Program of CPSF(GZC20232098)as well as the Xiaomi Foundation through Xiaomi Young Scholar Program。
文摘The layer-by-layer deposition strategy of additive manufacturing makes it ideal to fabricate dissimilar alloy components with varying functionality,which has promising application potential in a large number of industrial areas.In this study,two components composed of ERCuAl-A2 aluminum bronze(CuAl9)and Inconel 718 nickel-based superalloy were fabricated with different deposition orders by wire-arc directed energy deposition.Subject to changes in heat input and thermophysical properties of the substrate,the transition region of the deposited Cu-Ni component with the bottom half of CuAl9 and the top half of Inconel 718 is narrow and serrated.This region features a laminated intermetallic compound layer due to the convection and rapid cooling in the molten pool.In contrast,the Ni-Cu component deposited in the opposite order exhibits a 2 mm gradient transition zone.Within this region,a large number of diverse precipitates were found as well as regional variations in grain size due to the multi-layer partial remelting.Both two components show strong bonds and their tensile specimens tested along the vertical direction always fracture at the softer CuAl9 side.Excellent tensile properties along the horizontal direction were obtained for Cu-Ni(Ultimate tensile strength:573 MPa,yield stress:302 MPa,elongation:22%),while those of Ni-Cu are much lower due to the existence of the solidification cracks in the transition zone.The results from this study provide a reference for the additive manufacturing of Cu/Ni dissimilar alloy components,as well as their microstructure and mechanical properties control.
基金supported by the Class Ⅲ Peak Discipline of Shanghai,China-Materials Science and Engineering(High-Energy Beam Intelligent Processing and Green Manufacturing).
文摘Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.
基金financially supported by the Natural Science Foundation of China(52277218)the Hubei Provincial Natural Science Foundation of China(2024AFA094)+1 种基金the Excellent Discipline Cultivation Project by JHUN(2023XKZ009)the Graduate Student Innovation Fund of JHUN(KYCXJJ202422).
文摘Lithium metal batteries(LMBs)with high energy density are impeded by the instability of solid electrolyte interface(SEI)and the uncontrolled growth of lithium(Li)dendrite.To mitigate these challenges,optimizing the SEI structure and Li deposition behavior is the key to stable LMBs.This study novelty proposes a facile synthesis of MgF_(2)/carbon(C)nanocomposite through the mechanochemical reaction between metallic Mg and polytetrafluoroethylene(PTFE)powders,and its modified polypropylene(PP)separator enhances LMB performance.The in-situ formed highly conductive fluorine-doped C species play a crucial role in facilitating ion/electron transport,thereby accelerating electrochemical kinetics and altering Li deposition direction.During cycling,the in-situ reaction between MgF_(2)and Li leads to the formation of LiMg alloy,along with a LiF-rich SEI layer,which reduces the nucleation overpotential and reinforces the interphase strength,leading to homogeneous Li deposition with dendrite-free feature.Benefiting from these merits,the Li metal is densely and uniformly deposited on the MgF_(2)/C@PP separator side rather than on the current collector side.Furthermore,the symmetric cell with MgF_(2)/C@PP exhibits superb Li plating/stripping performance over 2800 h at 1 mA cm^(-2)and 2 mA h cm^(-2).More importantly,the assembled Li@MgF_(2)/C@PPILiFePO4full cell with a low negative/positive ratio of 3.6delivers an impressive cyclability with 82.7%capacity retention over 1400 cycles at 1 C.
基金supported by the National Natural Science Foundation of China(92162218,42302101,42202099)the Guizhou Provincial Natural Science Foundation(ZK[2023]477)。
文摘Unraveling the precise mineralization age is vital to understand the geodynamic setting and ore-forming mechanism of the sediment-hosted Pb-Zn deposit;this has long been a challenge.The Sichuan-Yunnan-Guizhou(SYG)triangle in the southwestern margin of the Yangtze Block is a globally recognized carbonate-hosted Pb-Zn metallogenic province and also an essential part of the South China low-temperature metallogenic domain.This region has>30 million tons(Mt)Zn and Pb resources and shows the enrichment of dispersed metals,such as Ga,Ge,Cd,Se,and Tl.During the past 2 decades,abundant data on mineralization ages of Pb-Zn deposits within the SYG triangle have been documented based on various radioisotopic dating methods,resulting in significant progress in understanding the geodynamic background and ore formation of Pb-Zn deposits hosted in sedimentary rocks at SYG triangle.This paper provides a comprehensive summary of the geochronological results and Pb-Sr isotopic data regarding Pb-Zn deposits in the SYG triangle,which identified two distinct Pb-Zn mineralization periods influencing the dynamic processes associated with the expansion and closure of the Paleo-Tethys Ocean in the western margin of the Yangtze Block.The predominant phase of Pb-Zn mineralization at SYG triangle spanned from the Middle Triassic to Early Jurassic(226-191 Ma),which was intensely correlated with the large-scale basin fluid transport triggered by the closure of the Paleo-Tethys Ocean and Indosinian orogeny.The secondary Pb-Zn mineralization phase occurred during the Late Devonian to Late Carboniferous and was controlled by extensional structures associated with the expansion of the Paleo-Tethys Ocean.Further investigation is necessary to clarify the occurrence and potential factors involved in the Pb-Zn mineralization events during the Late Devonian to Late Carboniferous.
基金suppor ted by Yunnan Major Scientific and Technological Projects(Grant No.202202AG050006)the Personnel Training Project of Kunming University of Science and Technology(Grant No.KKZ3202221022)。
文摘The Guanfang large-scale W deposit is located in the W polymetallic ore concentration area of Bozhushan in southeastern Yunnan,China.Despite extensive research,the fluid evolution process of the deposit remains ambiguous,leading to controversy regarding its genesis.This study conducted a detailed field geological survey,with systematic sampling of the KT6 orebody,to delineate mineralization stages.Fine mineralogy work,including the use of CL images of scheelite,in-situ LA-ICP-MS trace elements,and Sr isotopes,was carried out on diff erent generations of scheelite formed in various stages.The findings identified the evolution of fluids in the mineralization process,shedding light on the genesis of the deposit.The study revealed four mineralization stages at the Guanfang W deposit:prograde skarn stage,retrograde skarn stage,quartz-sulfide stage,and carbonate-fluorite stage.Diff erent generations of scheelite(Sch I,Sch II,Sch III)were observed in the first three stages,displaying distinct chondrite-normalized REE patterns.The REE of Sch I mainly substituted into the Ca site by REE^(3+)+□_(Ca),and there may be a similar substitution of Nb for REE,whereas it is not the main substitution method.The REE of Sch II mainly enter the scheelite lattice in the form of REE 3++Na+,and there may be a substitution of Nb for REE isomorphism.In the early stage,The REE of Sch III was mainly replaced by Nb for REE isomorphism,while in the later stage,the replacement mode of REE^(3+)+□_(Ca)coexisted with it.The Mo content in scheelite,along with the corresponding Eu anomalies in both scheelite and garnet,collectively imply that the ore-forming fluids during various mineralization stages were predominantly oxidizing,with only slight reducibility observed in Sch II.The in-situ Sr isotope ratios of scheelite concentrates ranged from 0.7093 to 0.7153,resembling those of the Bozhushan granite,indicating a relationship between W mineralization and granite.In addition,the Y/Ho ratios of scheelite from various mineralization stages exhibit a narrow range(19-31),with a pronounced correlation between the contents of Y and Ho and a similar trend in their variation.This consistency suggests that the Guanfang deposit has undergone a uniform or comparable evolutionary process,implying a stable ore-forming fluid across diff erent mineralization stages.
基金supported by the Science Foundation of Zhejiang Sci-Tech University(18062299-Y)。
文摘The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severely hindered the practical application of Li in constructing high energy-density Li metal batteries(LMBs).Herein,a novel Li host(3D ZnO/CNTs/Cu)featuring ordered microchannels and lithiophilic ZnO species on the inner walls of the microchannels is introduced,which induces the uniform Li^(+) deposition into the microchannels and finally suppresses the formation of Li dendrites.The stable structure of the fabricated 3D Li host can adapt to volume variations upon Li^(+) plating/stripping,thereby enhancing electrochemical performances.Symmetric cells with the 3D ZnO/CNTs/Cu@Li anode exhibited long cycle stability at areal current densities of 0.5 and 2 mA cm^(-2);Full cells maintained a reversible discharge capacity of 105 mAh g^(-1) after 400 cycles at 1C with a capacity retention of 70%.Meanwhile,ex-situ SEM observations proved that the 3D ZnO/CNTs/Cu@Li anode can keep the structural integrity during charging/discharging(or plating/stripping).This work suggested that lithiophilic nanochannels in the Li host can significantly improve the electrochemical performance and safety of LMBs.
基金supported by the Ministry of Science and Higher Education of the Russian Federation(agreement No.075-15-2021-1349)。
文摘Synchrotron method of resonant X-ray reflectivity 2D mapping has been applied to study ultrathin epitaxial layers of WS_(2)grown by pulsed laser deposition on Al_(2)O_(3)(0001)substrates.The measurements were carried out across the L absorption edge of tungsten to perform depth-dependent element-selective analysis sensitive to potential chemical modification of the WS_(2)layer in ambient conditions.Despite the few monolayer thickness of the studied film,the experimentally measured maps of reflectance as a function of incident angle and photon energy turned out to be quite informative showing well-pronounced interference effects near W absorption edge at 10210 eV.The synchrotron studies were complemented with conventional non-resonant reflectance measurements carried out in the laboratory at a fixed photon energy corresponding to Cu Kαemission.The reconstruction of the depth and energy dependent scattering length density within the studied multilayers was carried out using the OpenCL empowered fitting software utilizing spectral shaping algorithm which does not rely on the pre-measured reference absorption spectra.A thin WO_(x) layer has been revealed at the surface of the WS_(2)layer pointing out to the effect of water assisted photo-oxidation reported in a number of works related to ultrathin layers of transition metal dichalcogenides.
基金supported by the National Natural Science Foundation of China(No.52205360)。
文摘Owing to the lack of matching commercial welding wires,the development of wire arc additive manufacturing(WAAM)for most aluminum alloys is hindered.A wire-powder synchronous arc additive manufacturing(WPAAM)was proposed to prepare the target Al-Si-Mg aluminum alloy.Based on the synchronous deposition of AlSi_(12) wire and pure Mg powder,the deposition width of the WPAAMed thin-wall was increased by 61% compared with that of WAAMed thin-wall using AlSi_(12) wire,and the machining allowance was reduced by 81%.The added Mg powder benefited to form refined equiaxed grains,and reduced the average grain size of the WPAAMed thin-wall to 47.1μm,showing a decrease of 23.8% relatively to that of the WAAMed thin-wall.Besides,Mg reacted with Si to form Mg_(2)Si strengthening phases.The mechanical properties tests showed that the ultimate tensile strength and elongation of the WPAAMed thin-wall increased up to 174.5 MPa and 4.1%,reaching 92% and 60% those of the WAAMed thin-wall,respectively.
基金supported by the National Natural Science Foundation of China(51975112,52375412)Fundamental Research Funds for Central Universities(N2203011)。
文摘Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality.It is essential to understand the underlying printability of different material combinations based on an adapted process.Here,the printability disparities of two common and attractive material combinations(nickel-and iron-based alloys)are evaluated at the macro and micro levels via laser directed energy deposition(DED).The deposition processes were captured using in situ high-speed imaging,and the dissimilarities in melt pool features and track morphology were quantitatively investigated within specific process windows.Moreover,the microstructure diversity of the tracks and blocks processed with varied material pairs was comparatively elaborated and,complemented with the informative multi-physics modeling,the presented non-uniformity in mechanical properties(microhardness)among the heterogeneous material pairs was rationalized.The differences in melt flow induced by the unlike thermophysical properties of the material pairs and the resulting element intermixing and localized re-alloying during solidification dominate the presented dissimilarity in printability among the material combinations.This work provides an in-depth understanding of the phenomenological differences in the deposition of dissimilar materials and aims to guide more reliable DED forming of bimetallic parts.
基金funded by the China Postdoctoral Science Foundation(Grant No.2022M721614)the opening project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(Grant No.KFJJ23-07M)。
文摘This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.
基金supported by the Biological Breeding-National Science and Technology Major Project (2023ZD04072)the Innovation Program of Chinese Academy of Agricultural Sciencesthe Hainan Yazhou Bay Seed Lab (B23YQ1507)。
文摘In grain crops such as maize(Zea mays),leaf angle(LA)is a key agronomic trait affecting light interception and thus planting density and yield.Nitrogen(N)affects LA in plants,but we lack a good understanding of how N regulates LA.Here,we report that N deficiency enhanced lignin deposition in the ligular region of maize seedlings.In situ hybridization showed that the bZIP transcription factor gene ZmbZIP27 is mainly expressed in the phloem of maize vascular bundles.Under N-sufficient conditions,transgenic maize overexpressing ZmbZIP27 showed significantly smaller LA compared with wild type(WT).By contrast,zmbzip27_(ems)mutant showed larger LA under both N-deficient and N-sufficient conditions compared with WT.Overexpression of ZmbZIP27 enhanced lignin deposition in the ligular region of maize in the field.We further demonstrated that ZmbZIP27 could directly bind the promoters of the microRNA genes ZmMIR528a and ZmMIR528b and negatively regulate the expression levels of ZmmiR528.ZmmiR528 knockdown transgenic maize displayed erect architecture in the field by increasing lignin content in the ligular region of maize.Taken together,these results indicate that ZmbZIP27 regulates N-mediated LA size by regulating the expression of ZmmiR528 and modulating lignin deposition in maize.
基金supported by the Key Research Project of China Geological Survey(Grant No.DD20230564)the Research Project of Natural Resources Department of Gansu Province(Grant No.202219)。
文摘Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.
基金This work was supported by the National Natural Science Foundation of China(51874332,51991363)the CNPC's Major Science and Technology Projects(ZD2019-184-003)+1 种基金the Fundamental Research Funds for Central Universities(20CX05008A)“14th Five-Year plan”forward-looking basic major science and technology project of CNPC(2021DJ4901).
文摘Natural gas hydrate(NGH)can cause pipeline blockages during the transportation of oil and gas under high pressures and low temperatures.Reducing hydrate adhesion on pipelines is viewed as an efficient way to prevent NGH blockages.Previous studies suggested the water film can greatly increase hydrate adhesion in gas-dominant system.Herein,by performing the molecular dynamics simulations,we find in water-dominant system,the water film plays different roles in hydrate deposition on Fe and its corrosion surfaces.Specifically,due to the strong affinity of water on Fe surface,the deposited hydrate cannot convert the adsorbed water into hydrate,thus,a water film exists.As water affinities decrease(Fe>Fe_(2)O_(3)>FeO>Fe_(3)O_(4)),adsorbed water would convert to amorphous hydrate on Fe_(2)O_(3)and form the ordered hydrate on FeO and Fe_(3)O_(4)after hydrate deposition.While absorbed water film converts to amorphous or to hydrate,the adhesion strength of hydrate continuously increases(Fe<Fe_(2)O_(3)<FeO<Fe_(3)O_(4)).This is because the detachment of deposited hydrate prefers to occur at soft region of liquid layer,the process of which becomes harder as liquid layer vanishes.As a result,contrary to gas-dominant system,the water film plays the weakening roles on hydrate adhesion in water-dominant system.Overall,our results can help to better understand the hydrate deposition mechanisms on Fe and its corrosion surfaces and suggest hydrate deposition can be adjusted by changing water affinities on pipeline surfaces.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS-2023-00213920,NRF-2021R1A4A1031761).
文摘Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.
