The effect of combining different organic friction modifiers(OFMs)with ashless dispersants on the dispersion performance of lubricant oils in sludge was investigated using molecular dynamics(MD)simulations.polyisobuty...The effect of combining different organic friction modifiers(OFMs)with ashless dispersants on the dispersion performance of lubricant oils in sludge was investigated using molecular dynamics(MD)simulations.polyisobutylsuccinimide(PIBSI)was mixed with either glycerol monooleate(GMO)or oleamide(OAM)in a poly-α-olefin(PAO)base oil.The distribution and interaction energy of sludge precursors were analyzed both with and without these additive mixtures.The results show that both the OFMs and dispersants can form hydrogen bonds with sludge precursor molecules,preventing further aggregation.Adding OFMs to lubricant oil-containing dispersants enhances the dispersion of the lubricant.Compared to OAM,GMO forms more hydrogen bonds with sludge precursors,which favors improved dispersion.However,there is strong competition and interaction between GMO and PIBSI,which reduces the dispersant’s effectiveness in mitigating sludge precursor aggregation.The interactions among additives and their impact on performance should be considered when designing high-performance lubricant formulations.展开更多
This work presents the influence of dispersants on coal-water slurry(CWS),which was prepared from the solid residue of plasma pyrolysis of coal.The effects of dispersant type,solid concentration,dispersant content,and...This work presents the influence of dispersants on coal-water slurry(CWS),which was prepared from the solid residue of plasma pyrolysis of coal.The effects of dispersant type,solid concentration,dispersant content,and temperature on the rheological properties of CWS are examined.A suitable empirical model regarding the relation between viscosity and temperature is proposed.Through the sedimentation experiment of CWS,dispersants are found to significantly promote the stability of CWS.展开更多
The influence of the precipitating reagents and dispersants on the formation of nano-aluminum hydroxide from sodium aluminate solution by chemical precipitation was investigated. The influence of the dispersed seeds o...The influence of the precipitating reagents and dispersants on the formation of nano-aluminum hydroxide from sodium aluminate solution by chemical precipitation was investigated. The influence of the dispersed seeds on the decomposi-tion process was investigated too. The alkaline aluminate solutions were used as original solutions with a concentration of Al2O3 having 14.78 g/dm3, αk—1.6 and127 g/dm3, αk—1.6. For the precipitation processes there were used follow-ing precipitating reagents—solutions HCl, NaHCO3 and NH4HCO3 with a concentration of 80 g/dm3, dispersants—PEG 6000, (NaPO3)6 and Tween 20. For the decomposition process the dispersed seeds and factories seeds were used. Structural studies of the aluminum hydroxide particles were carried out by means of the electron-probe microanalysis and scanning electron microscopy, and phase composition of products was determined by means of X-ray diffraction analysis. Ammonium bicarbonate and Tween 20 were determined as the optimal precipitating reagent and dispersant, correspondingly, resulting in dispersed aluminum hydroxide, which is used as a seed in the decomposition process. It was established that this product in form of dispersed seed considerably reduces the duration of the decomposition process;the maximal decomposition of solution (73.9%) was observed after injection of dispersеd aluminum hydroxide into solution. The final aluminum hydroxide having 90% of particles less than 100 nanometers was obtained within 7 hours of steady decreasing temperature from 70°C to 48°C.展开更多
Gelation adversely affects the aqueous adiabatic terpolymerization of acrylamide (AM), sodium acrylate (NaAA),and 2-methacryloyloxyethyl trimethylammonium chloride (DMC). Here, the mixed dispersants sorbitan monooleat...Gelation adversely affects the aqueous adiabatic terpolymerization of acrylamide (AM), sodium acrylate (NaAA),and 2-methacryloyloxyethyl trimethylammonium chloride (DMC). Here, the mixed dispersants sorbitan monooleate (Span80) and polyoxyethylene sorbitan monooleate (Tween 80) were introduced to the terpolymerization system in an attemptto mitigate the gel effect. This enabled the preparation of high-performance amphoteric polyacrylamides, which werecharacterized by Fourier-transform infrared spectroscopy and thermogravimetric analysis. The influences of the dispersanttype and content as well as the hydrophilic-lipophilic balance (HLB) on the gel effect were examined, and the mechanismunderlying the suppression of the gel effect was considered. The obtained results indicated that the gel effect can beeffectively mitigated using an aqueous adiabatic terpolymerization system containing mixed Span 80/Tween 80 dispersantsat various contents. In particular, mixed dispersant contents of 0.6%–0.8% with HLB values of 5.0–6.0 afforded the optimalperformance (e.g., high viscosity, fast aqueous dissolution time, and the like).展开更多
As the efficiency of dispersants with different origins is questionable for each typical oil sample, the present study provides a reproducible and reliable method for screening asphaltene dispersants for a typical asp...As the efficiency of dispersants with different origins is questionable for each typical oil sample, the present study provides a reproducible and reliable method for screening asphaltene dispersants for a typical asphal- tenic crude oil. Four different asphaltene dispersants （polyisobutylene succinimide, polyisobutylene succinic ester, nonylphenol-formaldehyde resin modified by polyamines, and rapeseed oil amide） were prepared and their performance on two oils from an Iranian field under laboratory and reservoir conditions was studied. A thorough analysis including ash content and SARA tests was performed on the solid asphaltene particles to characterize the nature of deposits. Then a highly efficient carrier fluid, which is crucial when injecting dispersant into the wells, was selected from a variety of chemicals by comparing their solubility. In the next step, using an optical microscope, a viscometer, and a Turbiscan, the screening of dispersants under laboratory conditions was done on a mixture of dead oil and dispersant to evaluate the onset of asphaltene precipitation and its stability when titrating by a precipitant. Finally, two different mixtures of the efficient dispersants, live oil, and carrier fluid were used with the solid detection system （SDS） and the filtration method to examine their effects on the onset pressure of asphaltene precipitation and the asphaltene content of the crude oil under reservoir conditions. The results show that the combination of experimental methods used in this work could be consistently applied to screening asphaltene dispersants. Among the four different dispersants applied here, the dispersant based on nonylphenol-formaldehyde resin modified by polyamines showed the best performance on the available live oils. This chemical modified the onset pressure of asphaltene precipitation of light oil from 4300 psi to about 3600 psi and decreased the precipitated asphaltene of heavy oil by about 30 %.展开更多
The effects of SN5040 and polyethylene glycol（PEG） individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The ad...The effects of SN5040 and polyethylene glycol（PEG） individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The adsorption mechanism of these dispersants was detected by zeta potential, isothermal absorption and FTIR analysis. It is found that SN5040 is superior for stabilizing nano-TiO2 in aqueous suspension to PEG in basic region, and the optimum mass fraction of SN5040 addition is 3%. In the case of NaCl addition, the optimum value increases with .the increase of NaCl concentration in the solution. When the mixture of SN5040 and PEG is employed, the antagonism appears preponderant. When SN5040 and PEG are added sequentially, the synergistic reaction takes place. The synergistic reaction can be attributed to the mechanism that PEG adsorption decreases the electronic repulsion between SN5040 molecules, which results in the increase of SN5040 adsorption density. PEG is adsorbed by the interaction with the pre-adsorbed SN5040 layer. Furthermore, the modified inner wall latex paint with well dispersed nano-YiO2 suspension is endowed with excellent ultraviolet absorption and antibacterial properties.展开更多
Diesel engine technology innovation causes excessive soot accumulated in engine oil.Due to its detrimental effect on lubricant and diesel engine,improving the dispersibility of engine oil to restrain soot aggregation ...Diesel engine technology innovation causes excessive soot accumulated in engine oil.Due to its detrimental effect on lubricant and diesel engine,improving the dispersibility of engine oil to restrain soot aggregation efficiently is the key technique for formulations.In this study,the aggregation of soot and interaction between dispersant and soot were investigated by molecular dynamic simulation.It was found that the molecular interaction between the dispersant and the soot aggregation system had a significant influence on disrupting the soot aggregation.Bis-PIBSI was more beneficial to having more interaction sites with soot molecules,while the mono-PIBSI with a high proportion of polar groups had stronger interaction with soot molecules.According to the simulation result,suggestions for use of additives were proposed.Carbon black dispersancy test was exploited to verify the dispersion effect of different dispersants on carbon black.The results indicate that mono-PIBSI and bis-PIBSI added at suitable mixture ratio to lubricant could perform good dispersion ability.展开更多
This study aims to evaluate the subacute toxic effects of oil under different treatments on marine organism by simulating natural contaminative processes. In this study, 120# （RMD15） fuel oil was selected as the pol...This study aims to evaluate the subacute toxic effects of oil under different treatments on marine organism by simulating natural contaminative processes. In this study, 120# （RMD15） fuel oil was selected as the pollutant and marine medaka （Oryzias melastigma） embryos as the experimental organism. The developmental toxicity of different volume concentrations （0.05%, 0.2%, 1% and 5%） of water-accommodated fractions, biologically-enhanced water-accommodated fractions, and chemically-enhanced water-accommodated fractions on the embryos in different exposure time （8, 15 and 22 d） were compared and the content of relevant polycyclic aromatic hydrocarbons （PAHs） was studied （in dispersion and in vivo）. The subacute toxic effects were assessed in terms of antioxidant activities of enzymes （superoxide dismutase, catalase and glutathione S-transferase） and the blue sac disease （BSD） indexes.The results showed that the BSD indexes of the treatment groups were significantly higher than the respective control groups and showed positive correlations with both concentration and exposure time. The experiments with three antioxidant enzymes indicated that enzymatic activities of the embryos changed dramatically under the oxidation stress of petroleum hydrocarbons, especially after adding the dispersants. With the increase of petroleum hydrocarbon concentration and exposure time, the three enzymes showed different degrees of induction and inhibition effects.展开更多
The effects of sodium carboxymethyl cellulose and sodium citrate as dispersants on nano-ceramic aqueous suspension were examined by the measurements of ζ -potential and the sedimentation test. The results show that p...The effects of sodium carboxymethyl cellulose and sodium citrate as dispersants on nano-ceramic aqueous suspension were examined by the measurements of ζ -potential and the sedimentation test. The results show that proper addition of sodium carboxymethyl cellulose or sodium citrate into nano-ceramic coating, exhibits an enhanced dispersion and stability compared with the coating without dispersants. The negative ζ -potential of the particles in the nano-coating increases with the increase of pH value of the coating, and the curve of ζ -pH moves to lower pH range when the dispersants are added into the coating. To ensure that the coating has not only good stability and dispersibility but also no corrosivity to substrate alloy, adding 1.00% sodium citrate into coating with pH value of 7-8 is preferable to adding sodium carboxymethyl cellulose.展开更多
The synthesis and properties of three kinds of hyper-dispersants are studied in this paper, which are non-terminated, carboxyl-terminated and polyethylene imine grafted poly（hydroxyl carboxylic acid） ester. The hype...The synthesis and properties of three kinds of hyper-dispersants are studied in this paper, which are non-terminated, carboxyl-terminated and polyethylene imine grafted poly（hydroxyl carboxylic acid） ester. The hyper-dispersants are synthesized by the materials of 12-hydroxy-stearic acid, stearic acid and polyethylene imine, which are used to improve the dispersion properties of nano titanium dioxide （nano-TiO2） in low-concentration resin solution system. The influences of hyper-dispersants on the viscosity and stability of the system are studied. It is found that polyethylene imine grafted hyper-dispersant has the best dispersion performance in nano-TiO2 dispersion system, and the optimal content of the hyper-dispersant is 4%.展开更多
In order to make corundum castables satisfy more severe service conditions in high temperature industries,colloidal alumina due to the same main component with corundum castables was introduced for a pure binding syst...In order to make corundum castables satisfy more severe service conditions in high temperature industries,colloidal alumina due to the same main component with corundum castables was introduced for a pure binding system.The influence of three dispersants(citric acid,FS10 and urea)on the flow ability of colloidal alumina bonded corundum castables was researched to choose a suitable dispersant for solving the shaping problem.In order to further understand the influence of dispersants on the flow ability and the mechanism,the rheological property and Zeta potential value of the colloidal aluminadispersant system and the matrix-colloidal alumina-urea-water system were tested.The results show the castables added with the urea have the best flow ability,and the appropriate addition of the urea is 0.5%.展开更多
Dispersants, usually blending with several surfactants and a solvent, are used to enhance oil spill dispersion as small droplets in water column. Although there is growing acceptance of dispersants as a counter measur...Dispersants, usually blending with several surfactants and a solvent, are used to enhance oil spill dispersion as small droplets in water column. Although there is growing acceptance of dispersants as a counter measure to marine oil spills around the world, the two major issues with the dispersants are their toxicity to marine life and dispersion effectiveness (DE) for crude-oil, especially for heavy oil. To develop more efficient and less toxic dispersants, two kinds of sorbitol derivant nonionic surfactant (polysorbate 85 and sorbeth-40 tetraoleate), two kinds of glycolipid biosurfactants (rhamnolipid and sophorolipid) and less toxic solvent ethylene glycol butyl ether were chosen in this study, and two dispersant formulations were optimized by uniform design methods. Effects of dispersant-to-oil ratio, temperature, salinity and pH on the performance of the two optimized dispersants were investigated. The two dispersants had high dispersion effectiveness (DE) for heavy crude oil, while both dispersants keep high DE at the dispersant-to-oil ratio below 1:25 and the temperature above 5 ℃. In addition, the two dispersants also performed well in a wide range of salinity and pH values. Finally, toxicity tests revealed that the two dispersants showed low toxicity to two kinds of fish (Danio rerio and Microgobius gulosus).展开更多
This paper mainly clarified the dispersion mechanism of three typical chemical dispersants which are polyethylene glycol octylphenyl ether(Triton X-100,T-100),polyethylene pyrrolidone(PVP)and carboxymethyl cellulose(C...This paper mainly clarified the dispersion mechanism of three typical chemical dispersants which are polyethylene glycol octylphenyl ether(Triton X-100,T-100),polyethylene pyrrolidone(PVP)and carboxymethyl cellulose(CMC)within lithium-ion battery(LIB)slurry.Initially,the optimum amounts of T-100,PVP and CMC are selected from 0%,0.5%,1.5%and 2.5%by evaluating the impedance of LIB slurry in the case of adding each typical chemical dispersant with EIS method.Moreover,the impedance spectrum of three different slurry samples which are PVDF-NMP solution,LiCoO_(2) slurry and Carbon Black(CB)slurry with the optimum amount of each dispersant are also investigated.After using SEM and C element distribution images of LIB slurry to verify the correctness of the dispersion mechanism of each dispersant,it is concluded that the dispersion CMC with its optimum amount 1.5%is the best one to promote the formation of conductive paths and CB-coated LiCoO_(2) network structure within LIB slurry,which has the considerably potential to improve the performance of LIB.展开更多
Polyimide/carbon black（PI/CB） nanocomposite films were fabricated via the direct ball-milling method with poly（amic acid）（PAA）, the precursor of PI, as an in situ formed impurity-free dispersant. FTIR and Raman ...Polyimide/carbon black（PI/CB） nanocomposite films were fabricated via the direct ball-milling method with poly（amic acid）（PAA）, the precursor of PI, as an in situ formed impurity-free dispersant. FTIR and Raman spectral results reveal that, besides physical adsorption, chemical grafting of PAA chains onto the CB surface occurs during the ball-milling process. Comparative studies show that introduction of various commercial dispersants improves the dispersion of CB. However, the mixtures exhibit poor reproducibility, unstable electrical properties, and decreased tensile strength; these issues may be attributed to interfacial pollution brought about by differences in the chemical structures of the dispersant and the matrix. The impurity-free dispersant is effective not only in ensuring the uniform dispersion of CB particles but also in enhancing filler-matrix interfacial adhesion. High-molecular weight PAA chains are effective reagents for impurity-free modification and can therefore be used to improve the electrical and mechanical properties of the resultant composite.展开更多
Theoretical analysis has demonstrated that the dispersion relation of chorus waves plays an essential role in the resonant interaction and energy transformation between the waves and magnetospheric electrons.Previous ...Theoretical analysis has demonstrated that the dispersion relation of chorus waves plays an essential role in the resonant interaction and energy transformation between the waves and magnetospheric electrons.Previous quantitative analyses often simplified the chorus dispersion relation by using the cold plasma assumption.However,the applicability of the cold plasma assumption is doubtful,especially during geomagnetic disturbances.We here present a systematic statistical analysis on the validity of the cold plasma dispersion relation of chorus waves based on observations from the Van Allen Probes over the period from 2012 to 2018.The statistical results show that the observed magnetic field intensities deviate substantially from those calculated from the cold plasma dispersion relation and that they become more pronounced with an increase in geomagnetic activity or a decrease in background plasma density.The region with large deviations is mainly concentrated in the nightside and expands in both the radial and azimuthal directions as the geomagnetic activity increases or the background plasma density decreases.In addition,the bounce-averaged electron scattering rates are computed by using the observed and cold plasma dispersion relation of chorus waves.Compared with usage of the cold plasma dispersion relation,usage of the observed dispersion relation considerably lowers the minimum resonant energy of electrons and lowers the scattering rates of electrons above tens of kiloelectronvolts but enhances those below.Furthermore,these differences are more pronounced with the enhancement of geomagnetic activity or the decrease in background plasma density.展开更多
Dispersals,colonisation,immigration and population assimilation or replacement are fundamental themes in the Palaeolithic record of East Asia.Some of these issues can be studied within a biogeographic framework that e...Dispersals,colonisation,immigration and population assimilation or replacement are fundamental themes in the Palaeolithic record of East Asia.Some of these issues can be studied within a biogeographic framework that explains why and how the distribution of hominin species changed over time and space in response to climatic and environmental change.Because hominins(and especially humans)can change their behaviour through technical,social and cognitive developments,biogeographic models also have to incorporate this factor when investigating dispersals.This is particularly important with the dispersals in East Asia by Homo sapiens into rainforests,across open sea to off-shore islands,to the Arctic and the highest parts of the Tibetan Plateau.This paper suggests how hominin and human dispersals in East Asia might be investigated by using a biogeographic framework that can incorporate changes in hominin adaptability and behaviour.展开更多
Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characte...Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.展开更多
This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components o...This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components of global communication infrastructure, are capable of transmitting data over long distances with minimal loss through principles like total internal reflection. This study explores single-mode and multi-mode fiber designs, providing an overview of key parameters such as core diameter, refractive index profile, and numerical aperture. Mathematical modeling using Maxwell’s equations plays a central role in optimizing fiber performance, helping engineers mitigate challenges like attenuation and dispersion. The paper also discusses advanced techniques, including dense wavelength division multiplexing (DWDM), which enables terabit-per-second data rates. Case studies in practical applications, such as fiber-to-the-home (FTTH) networks and transoceanic cables, highlight the impact of optimized designs on network performance. Looking forward, innovations in photonic crystal fibers and hollow-core fibers are expected to drive further improvements, enabling ultra-high-speed data transmission. The paper concludes by underscoring the significance of continuous research and development to address challenges in optical fiber technology and support the increasing demands of global communication systems.展开更多
This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The prim...This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The primary objective is to identify an environmentally friendly stabilizer that can alleviate cracking and erosion resulting from soil dispersivity.Activated carbon(AC),known for its porous nature,was examined for its potential to enhance soil strength and erosion resistance.The charge neutralization process was evaluated by monitoring pH and conductivity,in addition to a comprehensive analysis of microscopic and mineral properties.The results show that high sodium levels or low clay contents result in the dispersive nature of soil in water.However,the incorporation of AC can transform such soil into a non-dispersive state.Moreover,both soil strength and erosion resistance exhibited enhancements with increasing AC content and curing duration.The incorporation of AC resulted in a maximum 5.6-fold increase in unconfined compressive strength and a 1.8-fold increase in tensile strength for dispersive soil.Notably,a significant correlation was observed during the curing phase among soil dispersivity,mechanical properties,and pH values.Microscopic analyses revealed that the porous structure of AC facilitated a filling effect and enhanced adsorption capacity,which contributed to improved soil characteristics and reduced dispersivity.The release of hydrogen ions and the formation of aggregates promote water stability.Validation tests conducted on dispersive soil from northern Shaanxi demonstrated the efficacy of physical adsorption using AC as a viable method for modifying dispersive soil in the water conservancy hub.展开更多
文摘The effect of combining different organic friction modifiers(OFMs)with ashless dispersants on the dispersion performance of lubricant oils in sludge was investigated using molecular dynamics(MD)simulations.polyisobutylsuccinimide(PIBSI)was mixed with either glycerol monooleate(GMO)or oleamide(OAM)in a poly-α-olefin(PAO)base oil.The distribution and interaction energy of sludge precursors were analyzed both with and without these additive mixtures.The results show that both the OFMs and dispersants can form hydrogen bonds with sludge precursor molecules,preventing further aggregation.Adding OFMs to lubricant oil-containing dispersants enhances the dispersion of the lubricant.Compared to OAM,GMO forms more hydrogen bonds with sludge precursors,which favors improved dispersion.However,there is strong competition and interaction between GMO and PIBSI,which reduces the dispersant’s effectiveness in mitigating sludge precursor aggregation.The interactions among additives and their impact on performance should be considered when designing high-performance lubricant formulations.
基金the financial support from the National Key Research and Development Program of China(2016YFB0301800)the National Natural Science Foundation of China(21606104).
文摘This work presents the influence of dispersants on coal-water slurry(CWS),which was prepared from the solid residue of plasma pyrolysis of coal.The effects of dispersant type,solid concentration,dispersant content,and temperature on the rheological properties of CWS are examined.A suitable empirical model regarding the relation between viscosity and temperature is proposed.Through the sedimentation experiment of CWS,dispersants are found to significantly promote the stability of CWS.
文摘The influence of the precipitating reagents and dispersants on the formation of nano-aluminum hydroxide from sodium aluminate solution by chemical precipitation was investigated. The influence of the dispersed seeds on the decomposi-tion process was investigated too. The alkaline aluminate solutions were used as original solutions with a concentration of Al2O3 having 14.78 g/dm3, αk—1.6 and127 g/dm3, αk—1.6. For the precipitation processes there were used follow-ing precipitating reagents—solutions HCl, NaHCO3 and NH4HCO3 with a concentration of 80 g/dm3, dispersants—PEG 6000, (NaPO3)6 and Tween 20. For the decomposition process the dispersed seeds and factories seeds were used. Structural studies of the aluminum hydroxide particles were carried out by means of the electron-probe microanalysis and scanning electron microscopy, and phase composition of products was determined by means of X-ray diffraction analysis. Ammonium bicarbonate and Tween 20 were determined as the optimal precipitating reagent and dispersant, correspondingly, resulting in dispersed aluminum hydroxide, which is used as a seed in the decomposition process. It was established that this product in form of dispersed seed considerably reduces the duration of the decomposition process;the maximal decomposition of solution (73.9%) was observed after injection of dispersеd aluminum hydroxide into solution. The final aluminum hydroxide having 90% of particles less than 100 nanometers was obtained within 7 hours of steady decreasing temperature from 70°C to 48°C.
基金the Project of Science and Technology Program of Guangzhou City of China(Project Nol.201604020004)for the financial support to this research.
文摘Gelation adversely affects the aqueous adiabatic terpolymerization of acrylamide (AM), sodium acrylate (NaAA),and 2-methacryloyloxyethyl trimethylammonium chloride (DMC). Here, the mixed dispersants sorbitan monooleate (Span80) and polyoxyethylene sorbitan monooleate (Tween 80) were introduced to the terpolymerization system in an attemptto mitigate the gel effect. This enabled the preparation of high-performance amphoteric polyacrylamides, which werecharacterized by Fourier-transform infrared spectroscopy and thermogravimetric analysis. The influences of the dispersanttype and content as well as the hydrophilic-lipophilic balance (HLB) on the gel effect were examined, and the mechanismunderlying the suppression of the gel effect was considered. The obtained results indicated that the gel effect can beeffectively mitigated using an aqueous adiabatic terpolymerization system containing mixed Span 80/Tween 80 dispersantsat various contents. In particular, mixed dispersant contents of 0.6%–0.8% with HLB values of 5.0–6.0 afforded the optimalperformance (e.g., high viscosity, fast aqueous dissolution time, and the like).
文摘As the efficiency of dispersants with different origins is questionable for each typical oil sample, the present study provides a reproducible and reliable method for screening asphaltene dispersants for a typical asphal- tenic crude oil. Four different asphaltene dispersants （polyisobutylene succinimide, polyisobutylene succinic ester, nonylphenol-formaldehyde resin modified by polyamines, and rapeseed oil amide） were prepared and their performance on two oils from an Iranian field under laboratory and reservoir conditions was studied. A thorough analysis including ash content and SARA tests was performed on the solid asphaltene particles to characterize the nature of deposits. Then a highly efficient carrier fluid, which is crucial when injecting dispersant into the wells, was selected from a variety of chemicals by comparing their solubility. In the next step, using an optical microscope, a viscometer, and a Turbiscan, the screening of dispersants under laboratory conditions was done on a mixture of dead oil and dispersant to evaluate the onset of asphaltene precipitation and its stability when titrating by a precipitant. Finally, two different mixtures of the efficient dispersants, live oil, and carrier fluid were used with the solid detection system （SDS） and the filtration method to examine their effects on the onset pressure of asphaltene precipitation and the asphaltene content of the crude oil under reservoir conditions. The results show that the combination of experimental methods used in this work could be consistently applied to screening asphaltene dispersants. Among the four different dispersants applied here, the dispersant based on nonylphenol-formaldehyde resin modified by polyamines showed the best performance on the available live oils. This chemical modified the onset pressure of asphaltene precipitation of light oil from 4300 psi to about 3600 psi and decreased the precipitated asphaltene of heavy oil by about 30 %.
基金Project(04GK2007) supported by Hunan Industrial Key Project of Science and Technology
文摘The effects of SN5040 and polyethylene glycol（PEG） individually and in combination on the dispersion stability of nano-TiO2 aqueous suspension were investigated by ultraviolet-visible absorption spectroscopy. The adsorption mechanism of these dispersants was detected by zeta potential, isothermal absorption and FTIR analysis. It is found that SN5040 is superior for stabilizing nano-TiO2 in aqueous suspension to PEG in basic region, and the optimum mass fraction of SN5040 addition is 3%. In the case of NaCl addition, the optimum value increases with .the increase of NaCl concentration in the solution. When the mixture of SN5040 and PEG is employed, the antagonism appears preponderant. When SN5040 and PEG are added sequentially, the synergistic reaction takes place. The synergistic reaction can be attributed to the mechanism that PEG adsorption decreases the electronic repulsion between SN5040 molecules, which results in the increase of SN5040 adsorption density. PEG is adsorbed by the interaction with the pre-adsorbed SN5040 layer. Furthermore, the modified inner wall latex paint with well dispersed nano-YiO2 suspension is endowed with excellent ultraviolet absorption and antibacterial properties.
基金We gratefully acknowledge the support from the China Petrochemical Corporation funding(Sinopec Group,No.117022)on this work.
文摘Diesel engine technology innovation causes excessive soot accumulated in engine oil.Due to its detrimental effect on lubricant and diesel engine,improving the dispersibility of engine oil to restrain soot aggregation efficiently is the key technique for formulations.In this study,the aggregation of soot and interaction between dispersant and soot were investigated by molecular dynamic simulation.It was found that the molecular interaction between the dispersant and the soot aggregation system had a significant influence on disrupting the soot aggregation.Bis-PIBSI was more beneficial to having more interaction sites with soot molecules,while the mono-PIBSI with a high proportion of polar groups had stronger interaction with soot molecules.According to the simulation result,suggestions for use of additives were proposed.Carbon black dispersancy test was exploited to verify the dispersion effect of different dispersants on carbon black.The results indicate that mono-PIBSI and bis-PIBSI added at suitable mixture ratio to lubricant could perform good dispersion ability.
基金The National Natural Science Foundation of China under contract No.41276105/D0608
文摘This study aims to evaluate the subacute toxic effects of oil under different treatments on marine organism by simulating natural contaminative processes. In this study, 120# （RMD15） fuel oil was selected as the pollutant and marine medaka （Oryzias melastigma） embryos as the experimental organism. The developmental toxicity of different volume concentrations （0.05%, 0.2%, 1% and 5%） of water-accommodated fractions, biologically-enhanced water-accommodated fractions, and chemically-enhanced water-accommodated fractions on the embryos in different exposure time （8, 15 and 22 d） were compared and the content of relevant polycyclic aromatic hydrocarbons （PAHs） was studied （in dispersion and in vivo）. The subacute toxic effects were assessed in terms of antioxidant activities of enzymes （superoxide dismutase, catalase and glutathione S-transferase） and the blue sac disease （BSD） indexes.The results showed that the BSD indexes of the treatment groups were significantly higher than the respective control groups and showed positive correlations with both concentration and exposure time. The experiments with three antioxidant enzymes indicated that enzymatic activities of the embryos changed dramatically under the oxidation stress of petroleum hydrocarbons, especially after adding the dispersants. With the increase of petroleum hydrocarbon concentration and exposure time, the three enzymes showed different degrees of induction and inhibition effects.
文摘The effects of sodium carboxymethyl cellulose and sodium citrate as dispersants on nano-ceramic aqueous suspension were examined by the measurements of ζ -potential and the sedimentation test. The results show that proper addition of sodium carboxymethyl cellulose or sodium citrate into nano-ceramic coating, exhibits an enhanced dispersion and stability compared with the coating without dispersants. The negative ζ -potential of the particles in the nano-coating increases with the increase of pH value of the coating, and the curve of ζ -pH moves to lower pH range when the dispersants are added into the coating. To ensure that the coating has not only good stability and dispersibility but also no corrosivity to substrate alloy, adding 1.00% sodium citrate into coating with pH value of 7-8 is preferable to adding sodium carboxymethyl cellulose.
基金supported by the Shanghai Leading Academic Disciplines (Grant No.T0105)the Key Laboratory of Science & Technology of Eco-Textile (Donghua University), Ministry of Education of China
文摘The synthesis and properties of three kinds of hyper-dispersants are studied in this paper, which are non-terminated, carboxyl-terminated and polyethylene imine grafted poly（hydroxyl carboxylic acid） ester. The hyper-dispersants are synthesized by the materials of 12-hydroxy-stearic acid, stearic acid and polyethylene imine, which are used to improve the dispersion properties of nano titanium dioxide （nano-TiO2） in low-concentration resin solution system. The influences of hyper-dispersants on the viscosity and stability of the system are studied. It is found that polyethylene imine grafted hyper-dispersant has the best dispersion performance in nano-TiO2 dispersion system, and the optimal content of the hyper-dispersant is 4%.
文摘In order to make corundum castables satisfy more severe service conditions in high temperature industries,colloidal alumina due to the same main component with corundum castables was introduced for a pure binding system.The influence of three dispersants(citric acid,FS10 and urea)on the flow ability of colloidal alumina bonded corundum castables was researched to choose a suitable dispersant for solving the shaping problem.In order to further understand the influence of dispersants on the flow ability and the mechanism,the rheological property and Zeta potential value of the colloidal aluminadispersant system and the matrix-colloidal alumina-urea-water system were tested.The results show the castables added with the urea have the best flow ability,and the appropriate addition of the urea is 0.5%.
文摘Dispersants, usually blending with several surfactants and a solvent, are used to enhance oil spill dispersion as small droplets in water column. Although there is growing acceptance of dispersants as a counter measure to marine oil spills around the world, the two major issues with the dispersants are their toxicity to marine life and dispersion effectiveness (DE) for crude-oil, especially for heavy oil. To develop more efficient and less toxic dispersants, two kinds of sorbitol derivant nonionic surfactant (polysorbate 85 and sorbeth-40 tetraoleate), two kinds of glycolipid biosurfactants (rhamnolipid and sophorolipid) and less toxic solvent ethylene glycol butyl ether were chosen in this study, and two dispersant formulations were optimized by uniform design methods. Effects of dispersant-to-oil ratio, temperature, salinity and pH on the performance of the two optimized dispersants were investigated. The two dispersants had high dispersion effectiveness (DE) for heavy crude oil, while both dispersants keep high DE at the dispersant-to-oil ratio below 1:25 and the temperature above 5 ℃. In addition, the two dispersants also performed well in a wide range of salinity and pH values. Finally, toxicity tests revealed that the two dispersants showed low toxicity to two kinds of fish (Danio rerio and Microgobius gulosus).
基金support from National Natural Science Foundation of China(grant No.52006176,51876175,and 62101438)the Key Research and Development Project of Shaanxi Province(grant No.2022kw-18).
文摘This paper mainly clarified the dispersion mechanism of three typical chemical dispersants which are polyethylene glycol octylphenyl ether(Triton X-100,T-100),polyethylene pyrrolidone(PVP)and carboxymethyl cellulose(CMC)within lithium-ion battery(LIB)slurry.Initially,the optimum amounts of T-100,PVP and CMC are selected from 0%,0.5%,1.5%and 2.5%by evaluating the impedance of LIB slurry in the case of adding each typical chemical dispersant with EIS method.Moreover,the impedance spectrum of three different slurry samples which are PVDF-NMP solution,LiCoO_(2) slurry and Carbon Black(CB)slurry with the optimum amount of each dispersant are also investigated.After using SEM and C element distribution images of LIB slurry to verify the correctness of the dispersion mechanism of each dispersant,it is concluded that the dispersion CMC with its optimum amount 1.5%is the best one to promote the formation of conductive paths and CB-coated LiCoO_(2) network structure within LIB slurry,which has the considerably potential to improve the performance of LIB.
基金supported by the National Basic Research Program of China(No.2013CB035505)the National Natural Science Foundation of China(No.51503066)+2 种基金Shanghai Sailing Program(No.14YF1404900)China Postdoctoral Science Foundation(No.2015M571502)the Fundamental Research Funds for the Central Universities
文摘Polyimide/carbon black（PI/CB） nanocomposite films were fabricated via the direct ball-milling method with poly（amic acid）（PAA）, the precursor of PI, as an in situ formed impurity-free dispersant. FTIR and Raman spectral results reveal that, besides physical adsorption, chemical grafting of PAA chains onto the CB surface occurs during the ball-milling process. Comparative studies show that introduction of various commercial dispersants improves the dispersion of CB. However, the mixtures exhibit poor reproducibility, unstable electrical properties, and decreased tensile strength; these issues may be attributed to interfacial pollution brought about by differences in the chemical structures of the dispersant and the matrix. The impurity-free dispersant is effective not only in ensuring the uniform dispersion of CB particles but also in enhancing filler-matrix interfacial adhesion. High-molecular weight PAA chains are effective reagents for impurity-free modification and can therefore be used to improve the electrical and mechanical properties of the resultant composite.
基金supported by the National Natural Science Foundation of China (NSFC) through Grant Number 42074193
文摘Theoretical analysis has demonstrated that the dispersion relation of chorus waves plays an essential role in the resonant interaction and energy transformation between the waves and magnetospheric electrons.Previous quantitative analyses often simplified the chorus dispersion relation by using the cold plasma assumption.However,the applicability of the cold plasma assumption is doubtful,especially during geomagnetic disturbances.We here present a systematic statistical analysis on the validity of the cold plasma dispersion relation of chorus waves based on observations from the Van Allen Probes over the period from 2012 to 2018.The statistical results show that the observed magnetic field intensities deviate substantially from those calculated from the cold plasma dispersion relation and that they become more pronounced with an increase in geomagnetic activity or a decrease in background plasma density.The region with large deviations is mainly concentrated in the nightside and expands in both the radial and azimuthal directions as the geomagnetic activity increases or the background plasma density decreases.In addition,the bounce-averaged electron scattering rates are computed by using the observed and cold plasma dispersion relation of chorus waves.Compared with usage of the cold plasma dispersion relation,usage of the observed dispersion relation considerably lowers the minimum resonant energy of electrons and lowers the scattering rates of electrons above tens of kiloelectronvolts but enhances those below.Furthermore,these differences are more pronounced with the enhancement of geomagnetic activity or the decrease in background plasma density.
文摘Dispersals,colonisation,immigration and population assimilation or replacement are fundamental themes in the Palaeolithic record of East Asia.Some of these issues can be studied within a biogeographic framework that explains why and how the distribution of hominin species changed over time and space in response to climatic and environmental change.Because hominins(and especially humans)can change their behaviour through technical,social and cognitive developments,biogeographic models also have to incorporate this factor when investigating dispersals.This is particularly important with the dispersals in East Asia by Homo sapiens into rainforests,across open sea to off-shore islands,to the Arctic and the highest parts of the Tibetan Plateau.This paper suggests how hominin and human dispersals in East Asia might be investigated by using a biogeographic framework that can incorporate changes in hominin adaptability and behaviour.
文摘Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.
文摘This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components of global communication infrastructure, are capable of transmitting data over long distances with minimal loss through principles like total internal reflection. This study explores single-mode and multi-mode fiber designs, providing an overview of key parameters such as core diameter, refractive index profile, and numerical aperture. Mathematical modeling using Maxwell’s equations plays a central role in optimizing fiber performance, helping engineers mitigate challenges like attenuation and dispersion. The paper also discusses advanced techniques, including dense wavelength division multiplexing (DWDM), which enables terabit-per-second data rates. Case studies in practical applications, such as fiber-to-the-home (FTTH) networks and transoceanic cables, highlight the impact of optimized designs on network performance. Looking forward, innovations in photonic crystal fibers and hollow-core fibers are expected to drive further improvements, enabling ultra-high-speed data transmission. The paper concludes by underscoring the significance of continuous research and development to address challenges in optical fiber technology and support the increasing demands of global communication systems.
基金financially supported by the National Postdoctoral Program for Innovative Talents(Grant No.BX20200287)the National Natural Science Foundation of China(Grant Nos.52079116 and 52378322).
文摘This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The primary objective is to identify an environmentally friendly stabilizer that can alleviate cracking and erosion resulting from soil dispersivity.Activated carbon(AC),known for its porous nature,was examined for its potential to enhance soil strength and erosion resistance.The charge neutralization process was evaluated by monitoring pH and conductivity,in addition to a comprehensive analysis of microscopic and mineral properties.The results show that high sodium levels or low clay contents result in the dispersive nature of soil in water.However,the incorporation of AC can transform such soil into a non-dispersive state.Moreover,both soil strength and erosion resistance exhibited enhancements with increasing AC content and curing duration.The incorporation of AC resulted in a maximum 5.6-fold increase in unconfined compressive strength and a 1.8-fold increase in tensile strength for dispersive soil.Notably,a significant correlation was observed during the curing phase among soil dispersivity,mechanical properties,and pH values.Microscopic analyses revealed that the porous structure of AC facilitated a filling effect and enhanced adsorption capacity,which contributed to improved soil characteristics and reduced dispersivity.The release of hydrogen ions and the formation of aggregates promote water stability.Validation tests conducted on dispersive soil from northern Shaanxi demonstrated the efficacy of physical adsorption using AC as a viable method for modifying dispersive soil in the water conservancy hub.
