The application of industrial solid wastes as environmentally functional materials for air pollutants control has gained much attention in recent years due to its potential to reduce air pollution in a cost-effective ...The application of industrial solid wastes as environmentally functional materials for air pollutants control has gained much attention in recent years due to its potential to reduce air pollution in a cost-effective manner.In this review,we investigate the development of industrialwaste-based functional materials for various gas pollutant removal and consider the relevant reaction mechanism according to different types of industrial solid waste.We see a recent effort towards achieving high-performance environmental functional materials via chemical or physical modification,in which the active components,pore size,and phase structure can be altered.The review will discuss the potential of using industrial solid wastes,these modified materials,or synthesized materials from raw waste precursors for the removal of air pollutants,including SO_(2),NO_(x),Hg^(0),H_(2)S,VOCs,and CO_(2).The challenges still need to be addressed to realize this potential and the prospects for future research fully.The suggestions for future directions include determining the optimal composition of these materials,calculating the real reaction rate and turnover frequency,developing effective treatment methods,and establishing chemical component databases of raw industrial solid waste for catalysts/adsorbent preparation.展开更多
A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses the...A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves conductivity.mPR-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain dispersion.Integrating this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 cycles.In situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen reactions.Ex situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability tests.The present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.展开更多
To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified ...To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified as an up-and-coming alternative.Among the various SEs,organic–inorganic composite solid electrolytes(OICSEs)that combine the advantages of both polymer and inorganic materials demonstrate promising potential for large-scale applications.However,OICSEs still face many challenges in practical applications,such as low ionic conductivity and poor interfacial stability,which severely limit their applications.This review provides a comprehensive overview of recent research advancements in OICSEs.Specifically,the influence of inorganic fillers on the main functional parameters of OICSEs,including ionic conductivity,Li+transfer number,mechanical strength,electrochemical stability,electronic conductivity,and thermal stability are systematically discussed.The lithium-ion conduction mechanism of OICSE is thoroughly analyzed and concluded from the microscopic perspective.Besides,the classic inorganic filler types,including both inert and active fillers,are categorized with special emphasis on the relationship between inorganic filler structure design and the electrochemical performance of OICSEs.Finally,the advanced characterization techniques relevant to OICSEs are summarized,and the challenges and perspectives on the future development of OICSEs are also highlighted for constructing superior ASSLBs.展开更多
Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SO...Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SOECs with Zr-rich electrolyte,called Zr-rich side P-SOECs,possess high thermodynamically stability under high steam concentrations but the large reaction resistances and the current leakage,thus the inferior performances.In this study,an efficient functional interlayer Ba_(0.95)La_(0.05)Fe_(0.8)Zn_(0.2)O_(3-δ)(BLFZ)in-between the anode and the electrolyte is developed.The electrochemical performances of P-SOECs are greatly enhanced because the BLFZ can greatly increase the interface contact,boost anode reaction kinetics,and increase proton injection into electrolyte.As a result,the P-SOEC yields high current density of 0.83 A cm^(-2) at 600℃ in 1.3 Vamong all the reported Zr-rich side cells.This work not only offers an efficient functional interlayer for P-SOECs but also holds the potential to achieve P-SOECs with high performances and long-term stability.展开更多
Solid waste management in Freetown has been further complicated in the wake of rapid population growth and urbanization, resulting in considerable pressure to implement effective and sustainable solutions. This study ...Solid waste management in Freetown has been further complicated in the wake of rapid population growth and urbanization, resulting in considerable pressure to implement effective and sustainable solutions. This study fills the knowledge gap on the recycling infrastructure, solid waste collection processing, sorting and material recovery facilities specific to the Freetown waste management system. The aim of this study is to examine these components in terms of identifying inefficiencies and suggest sustainable practices to eliminate them. The study was guided by a mixed-method approach, which consisted of both quantitative and qualitative methods, and data collection was done through systematic random sampling. The sample of 384 respondents was collected, which includes stakeholders from a range of sectors. The outcome exhibited inefficient waste collection, a lack of formal recycling infrastructure, and suboptimal waste separation at house level, with 65.2% of respondents evidencing not separating their waste and 33% being without access to waste collection services that result in illegal dumping and environmental pollution. The analysis of the solid waste composition shows that a larger share of the waste generated in Freetown is composed of organic material (53% is being organic), which allows for composting programs to be initiated. This research establishes the inevitable requirement for infrastructure upgrading, mounting public awareness, and policy development. By taking into account these sectors, Freetown can become a more environment-friendly waste management system, which would mean a reduction in landfills and much-emphasized resource recovery.展开更多
Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-p...Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-phase method as the cathode for CO_(2)electrolysis by SOECs.XRD confirms that SFMSc exhibits a stable cubic phase crystal structure.The experimental results of TPD,TG,EPR,CO_(2)-TPD further demonstrate that Sc-doping increases the concentration of oxygen vacancy in the material and the chemical adsorption capacity of CO_(2)molecules.Electrochemical tests reveal that SFMSc single cell achieves a current density of 2.26 A/cm^(2) and a lower polarization impedance of 0.32Ω·cm^(2) at 800°C under the applied voltage of 1.8 V.And no significant performance attenuation or carbon deposition is observed after 80 h continuous long-term stability test.This study provides a favorable support for the development of SOEC cathode materials with good electro-catalytic performance and stability.展开更多
Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poi...Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.展开更多
The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Ma...The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Many scholars have referred to it as a fuzzy multi-attribute or multi-criteria decision-making problem using various fuzzy set-like approaches because of the inclusion of criteria and anticipated ambiguity.The goal of the current study is to use an innovative methodology to address the expected uncertainties in the problem of solid waste site selection.The characteristics(or sub-attributes)that decision-makers select and the degree of approximation they accept for various options can both be indicators of these uncertainties.To tackle these problems,a novel mathematical structure known as the fuzzy parameterized possibility single valued neutrosophic hypersoft expert set(ρˆ-set),which is initially described,is integrated with a modified version of Sanchez’s method.Following this,an intelligent algorithm is suggested.The steps of the suggested algorithm are explained with an example that explains itself.The compatibility of solid waste management sites and systems is discussed,and rankings are established along with detailed justifications for their viability.This study’s strengths lie in its application of fuzzy parameterization and possibility grading to effectively handle the uncertainties embodied in the parameters’nature and alternative approximations,respectively.It uses specific mathematical formulations to compute the fuzzy parameterized degrees and possibility grades that are missing from the prior literature.It is simpler for the decisionmakers to look at each option separately because the decision is uncertain.Comparing the computed results,it is discovered that they are consistent and dependable because of their preferred properties.展开更多
Urban areas worldwide face escalating challenges in managing municipal solid waste (MSW) due to rapid urbanization, population growth, and changing consumption patterns. Inefficient waste management systems contribute...Urban areas worldwide face escalating challenges in managing municipal solid waste (MSW) due to rapid urbanization, population growth, and changing consumption patterns. Inefficient waste management systems contribute to environmental degradation, public health risks, and resource depletion, underscoring the need for innovative solutions. This review employing AI-driven sorting technologies in urban waste management as a transformative framework for sustainable MSW management, emphasizing waste reduction, resource recovery, and closed-loop systems. The paper synthesizes existing literature, case studies, and technological advancements to explore strategies for integrating CE principles into MSW management. Key areas of focus include the application of emerging technologies such as artificial intelligence, machine learning, and big data analytics;advancements in waste-to-resource technologies;the development of scalable and adaptable CE models tailored to diverse urban contexts;and fostering collaboration among governments, private sectors, and communities. Findings highlight the potential of CE frameworks to minimize waste generation, enhance resource efficiency, and create resilient urban systems. However, significant barriers remain, including technological, financial, and policy challenges. The review concludes by identifying future research directions and actionable recommendations for stakeholders, aiming to advance the global transition toward sustainable urban waste management.展开更多
Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage p...Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.展开更多
Carbon dioxide (CO2) is a substantial contributor to global warming owing to its long atmospheric lifetime and high potential for global warming. It is related to the processes of raw material mining and industry, whi...Carbon dioxide (CO2) is a substantial contributor to global warming owing to its long atmospheric lifetime and high potential for global warming. It is related to the processes of raw material mining and industry, which is fundamental to economic development but also has negative impacts on the environment, namely the increase of global temperature and solid waste. To address this, various carbon capture, storage, utilization, and mineralization methods have emerged, but they remain at an early stage of development. This review discusses the applicability of solid waste materials, and slurry form in particular, for CO2 mineralization. It analyzes frequently researched materials, carbonation capabilities, reaction mechanisms, and industrial uses. Industrial waste materials, cement, and demolition waste are widely used in carbonation reactions because of their abundance and high Ca/Mg oxide content. The review also discusses carbonation types, including two major types—direct and indirect—which fall under the ex-situ category. The key factors influencing the carbonation efficiency include the CO2 concentration, temperature, pressure, particle size, and reaction chamber type. The construction sector is the principal beneficiary of carbonated materials due to the cementitious characteristics of recarbonated byproducts and precipitated calcium carbonate (PCC). Other industries, such as paper, plastics, and pharmaceuticals, also find applications for PCC. Future research is recommended to explore new materials for slurry carbonation, with potential applications in underground mine support for carbon sequestration and subsidence control.展开更多
BACKGROUND Machine learning(ML),a major branch of artificial intelligence,has not only demonstrated the potential to significantly improve numerous sectors of healthcare but has also made significant contributions to ...BACKGROUND Machine learning(ML),a major branch of artificial intelligence,has not only demonstrated the potential to significantly improve numerous sectors of healthcare but has also made significant contributions to the field of solid organ transplantation.ML provides revolutionary opportunities in areas such as donorrecipient matching,post-transplant monitoring,and patient care by automatically analyzing large amounts of data,identifying patterns,and forecasting outcomes.AIM To conduct a comprehensive bibliometric analysis of publications on the use of ML in transplantation to understand current research trends and their implications.METHODS On July 18,a thorough search strategy was used with the Web of Science database.ML and transplantation-related keywords were utilized.With the aid of the VOS viewer application,the identified articles were subjected to bibliometric variable analysis in order to determine publication counts,citation counts,contributing countries,and institutions,among other factors.RESULTS Of the 529 articles that were first identified,427 were deemed relevant for bibliometric analysis.A surge in publications was observed over the last four years,especially after 2018,signifying growing interest in this area.With 209 publications,the United States emerged as the top contributor.Notably,the"Journal of Heart and Lung Transplantation"and the"American Journal of Transplantation"emerged as the leading journals,publishing the highest number of relevant articles.Frequent keyword searches revealed that patient survival,mortality,outcomes,allocation,and risk assessment were significant themes of focus.CONCLUSION The growing body of pertinent publications highlights ML's growing presence in the field of solid organ transplantation.This bibliometric analysis highlights the growing importance of ML in transplant research and highlights its exciting potential to change medical practices and enhance patient outcomes.Encouraging collaboration between significant contributors can potentially fast-track advancements in this interdisciplinary domain.展开更多
BACKGROUND In the absence of effective antimicrobials,transplant surgery is not viable,and antirejection immunosuppressants cannot be administered,as resistant infections compromise the life-saving goal of organ trans...BACKGROUND In the absence of effective antimicrobials,transplant surgery is not viable,and antirejection immunosuppressants cannot be administered,as resistant infections compromise the life-saving goal of organ transplantation.AIM To evaluate the efficacy of antimicrobials in preventing resistance in solid organ transplant recipients.METHODS A systematic review was conducted using a search methodology consistent with the preferred reporting items for systematic reviews and meta-analyses.This review included randomized clinical trials that evaluated the efficacy of antimicrobial agents(prophylactic or therapeutic)aimed at preventing antimicrobial resistance.The search strategy involved analyzing multiple databases,including PubMed/MEDLINE,Web of Science,Embase,Scopus,and SciELO,as well as examining gray literature sources on Google Scholar.A comprehensive electronic database search was conducted from the databases’inception until May 2024,with no language restrictions.RESULTS After the final phase of the eligibility assessment,this systematic review ultimate-ly included 7 articles.A total of 2318 patients were studied.The most studied microorganisms were cytomegalovirus,although vancomycinresistant enterococci,Clostridioides difficile,and multidrug-resistant Enterobacterales were also analyzed.The antimicrobials used in the interventions were mainly maribavir,valganciclovir,gancic-lovir,and colistin-neomycin.Of concern,all clinical trials showed significant proportions of resistant microorga-nisms after the interventions,with no statistically significant differences between the groups(mean resistance 13.47%vs 14.39%),except for two studies that demonstrated greater efficacy of maribavir and valganciclovir(mean resistance 22.2%vs 41.1%in the control group;P<0.05).The total reported deaths in three clinical trials were 75,and there were 24 graft rejections in two studies.CONCLUSION All clinical trials reported significant proportions of antimicrobial-resistant microorganisms following interventions.More high-quality randomized clinical trials are needed to corroborate these results.展开更多
A white hole is simply a region of spacetime described by general relativity.Black holes are often assumed to form through star collapses.Based on such an assumption,the white hole region does not present.Recent resea...A white hole is simply a region of spacetime described by general relativity.Black holes are often assumed to form through star collapses.Based on such an assumption,the white hole region does not present.Recent research on quantum gravity indicates that a black hole must convert into a white one to avoid the singularity difficulty encountered in general relativity.If such a theory is true,it is important to ask how white holes can be observed.Anything inside a white hole must be pushed outside.However,if a white hole is empty,nothing will escape from it.We can only observe the interaction behavior between the objects falling outside and the white hole.In this paper,we observe that the structure of the accretion disk around a white hole is exactly the same as the one around a black hole.The only possibility to distinguish a white hole from a black one is the light passing through the white hole.The image properties of white holes for such scenarios are investigated in this paper.Based on our analysis and current observation facts,we cannot certainly determine if M87 and Sgr A*are black or white holes.展开更多
Recent developments suggest that the race to power electric vehicles(EV)withsolid-statebatteries(SSB)hasgainedmomentum.In January 2024,Toyota Motor Corporation(Toyota City,Japan)confirmed its previously stated plans t...Recent developments suggest that the race to power electric vehicles(EV)withsolid-statebatteries(SSB)hasgainedmomentum.In January 2024,Toyota Motor Corporation(Toyota City,Japan)confirmed its previously stated plans to start producing SSB EV in the2027-2028timeframe[1].InMay2024,itemergedthattheChi-nesegovernmentplanstoinvestmorethansixbillionCNY(830mil-lion USD)in projects intended to speed up SSB development[2].In June 2024,the automaker Nio(Shanghai,China)began supplying customers with EVs containing“semi-solid-state”batteries-a hybrid technology that could serve as a stepping stone to fully solid versions[3].In September 2024,SAIC Motor(Shanghai,China),China’s largest automobile manufacturer,announced that it would deliver its first SSB-powered vehicles in 2025[4].展开更多
This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity a...This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.展开更多
All-solid-state batteries(ASSBs)are pursued due to their potential for better safety and high energy density.However,the energy density of the cathode for ASSBs does not seem to be satisfactory due to the low utilizat...All-solid-state batteries(ASSBs)are pursued due to their potential for better safety and high energy density.However,the energy density of the cathode for ASSBs does not seem to be satisfactory due to the low utilization of active materials(AMs)at high loading.With small amount of solid electrolyte(SE)powder in the cathode,poor electrochemical performance is often observed due to contact loss and non-homogeneous distribution of AMs and SEs,leading to high tortuosity and limitation of lithium and electron transport pathways.Here,we propose a novel cathode design that can achieve high volumetric energy density of 1258 Wh L^(-1)at high AM content of 85 wt%by synergizing the merits of AM@SE core–shell composite particles with conformally coated thin SE shell prepared from mechanofusion process and small SE particles.The core–shell structure with an intimate and thin SE shell guarantees high ionic conduction pathway while unharming the electronic conduction.In addition,small SE particles play the role of a filler that reduces the packing porosity in the cathode composite electrode as well as between the cathode and the SE separator layer.The systematic demonstration of the optimization process may provide understanding and guidance on the design of electrodes for ASSBs with high electrode density,capacity,and ultimately energy density.展开更多
Garnet Li_(7)La_(3)Zr_(2)O_(12)(LLZO)electrolytes have been recognized as a promising candidate to replace liquid/molten-state electrolytes in battery applications due to their exceptional performance,particularly Ga-...Garnet Li_(7)La_(3)Zr_(2)O_(12)(LLZO)electrolytes have been recognized as a promising candidate to replace liquid/molten-state electrolytes in battery applications due to their exceptional performance,particularly Ga-doped LLZO(LLZGO),which exhibits high ionic conductivity.However,the limited size of the Liþtransport bottleneck restricts its high-current discharging performance.The present study focuses on the synthesis of Ga^(3+)þand Ba^(2+)þco-doped LLZO(LLZGBO)and investigates the influence of doping contents on the morphology,crystal structure,Liþtransport bottleneck size,and ionic conductivity.In particular,Ga_(0.32)Ba_(0.15)exhibits the highest ionic conductivity(6.11E-2 S cm^(-1) at 550 C)in comparison with other compositions,which can be attributed to its higher-energy morphology,larger bottleneck and unique Liþtransport channel.In addition to Ba^(2+),Sr^(2+)þand Ca^(2+)have been co-doped with Ga3þinto LLZO,respectively,to study the effect of doping ion radius on crystal structures and the properties of electrolytes.The characterization results demonstrate that the easier Liþtransport and higher ionic conductivity can be obtained when the electrolyte is doped with larger-radius ions.As a result,the assembled thermal battery with Ga_(0.32)Ba_(0.15)-LLZO electrolyte exhibits a remarkable voltage platform of 1.81 V and a high specific capacity of 455.65 mA h g^(-1) at an elevated temperature of 525℃.The discharge specific capacity of the thermal cell at 500 mA amounts to 63%of that at 100 mA,showcasing exceptional high-current discharging performance.When assembled as prototypes with fourteen single cells connected in series,the thermal batteries deliver an activation time of 38 ms and a discharge time of 32 s with the current density of 100 mA cm^(-2).These findings suggest that Ga,Ba co-doped LLZO solid-state electrolytes with high ionic conductivities holds great potential for high-capacity,quick-initiating and high-current discharging thermal batteries.展开更多
Sodium-ion conducting materials in sodium-ion battery have drawn widespread attention in energy storage technologies due to the advantages of low cost,high performance,and efficient environmental adaptability.Herein,b...Sodium-ion conducting materials in sodium-ion battery have drawn widespread attention in energy storage technologies due to the advantages of low cost,high performance,and efficient environmental adaptability.Herein,bond valence site energy(BVSE)calculations were used to predict the sodium ion electrical performances by the Na nonstoichiometric modifications,and we have carried out fine experiments to modulate the sodium ion conductivity of Na_(x)Zn_(2)TeO_(6) guided by BVSE calculations.The optimized composition Na_(2.1)Zn_(2)TeO_(6) shows the superior sodium ionic conductivity of 5.3×10^(−3) S/cm at 190℃,with a low activation energy of 0.28 eV.The excess Na preferentially occupies the Na1 site with tetrahedral voids,which has a higher capacity for sodium ion migration,as revealed by the combined neutron powder diffraction technique with the 1D and 2D ^(23)Na solid-state NMR technique,which is responsible for the variations in sodium ion conductivity.In addition,it is worth noting that the resulting Na_(2.1)Zn_(2)TeO_(6) material maintains superior thermal and phase stability,as well as approximately the same thermal expansion coefficient values even during the temperature rise and fall cycles in the temperature range of 25–800°C.Furthermore,molecular dynamics simulations revealed that the sodium ions exhibit longrange anisotropic migration within the Na+interlayers of Na_(2.1)Zn_(2)TeO_(6).展开更多
基金supported by National Natural Science Foundation of China(Grant No.52270106 and 22266021)Yunnan Major Scientific and Technological Projects(grant No.202202AG050005)Yunnan Fundamental Research Projects(grant No.202201AT070116).
文摘The application of industrial solid wastes as environmentally functional materials for air pollutants control has gained much attention in recent years due to its potential to reduce air pollution in a cost-effective manner.In this review,we investigate the development of industrialwaste-based functional materials for various gas pollutant removal and consider the relevant reaction mechanism according to different types of industrial solid waste.We see a recent effort towards achieving high-performance environmental functional materials via chemical or physical modification,in which the active components,pore size,and phase structure can be altered.The review will discuss the potential of using industrial solid wastes,these modified materials,or synthesized materials from raw waste precursors for the removal of air pollutants,including SO_(2),NO_(x),Hg^(0),H_(2)S,VOCs,and CO_(2).The challenges still need to be addressed to realize this potential and the prospects for future research fully.The suggestions for future directions include determining the optimal composition of these materials,calculating the real reaction rate and turnover frequency,developing effective treatment methods,and establishing chemical component databases of raw industrial solid waste for catalysts/adsorbent preparation.
基金supported by a National Research Foundation of Korea(NRF)Grant funded by the Ministry of Science and ICT(2021R1A2C1014294,2022R1A2C3003319)the BK21 FOUR(Fostering Outstanding Universities for Research)through the National Research Foundation(NRF)of Korea.
文摘A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves conductivity.mPR-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain dispersion.Integrating this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 cycles.In situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen reactions.Ex situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability tests.The present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.
基金supported by the National Natural Science Foundation of China(Grant No.22075064,52302234,52272241)Zhejiang Provincial Natural Science Foundation of China under Grant No.LR24E020001+2 种基金Natural Science of Heilongjiang Province(No.LH2023B009)China Postdoctoral Science Foundation(2022M710950)Heilongjiang Postdoctoral Fund(LBH-Z21131),National Key Laboratory Projects(No.SYSKT20230056).
文摘To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified as an up-and-coming alternative.Among the various SEs,organic–inorganic composite solid electrolytes(OICSEs)that combine the advantages of both polymer and inorganic materials demonstrate promising potential for large-scale applications.However,OICSEs still face many challenges in practical applications,such as low ionic conductivity and poor interfacial stability,which severely limit their applications.This review provides a comprehensive overview of recent research advancements in OICSEs.Specifically,the influence of inorganic fillers on the main functional parameters of OICSEs,including ionic conductivity,Li+transfer number,mechanical strength,electrochemical stability,electronic conductivity,and thermal stability are systematically discussed.The lithium-ion conduction mechanism of OICSE is thoroughly analyzed and concluded from the microscopic perspective.Besides,the classic inorganic filler types,including both inert and active fillers,are categorized with special emphasis on the relationship between inorganic filler structure design and the electrochemical performance of OICSEs.Finally,the advanced characterization techniques relevant to OICSEs are summarized,and the challenges and perspectives on the future development of OICSEs are also highlighted for constructing superior ASSLBs.
基金financial support from the JSPS KAKENHI Grant-in-Aid for Scientific Research(B),No.21H02035KAKENHI Grant-in-Aid for Challenging Research(Exploratory),No.21K19017+2 种基金KAKENHI Grant-in-Aid for Transformative Research Areas(B),No.21H05100National Natural Science Foundation of China,No.22409033 and No.22409035Basic and Applied Basic Research Foundation of Guangdong Province,No.2022A1515110470.
文摘Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SOECs with Zr-rich electrolyte,called Zr-rich side P-SOECs,possess high thermodynamically stability under high steam concentrations but the large reaction resistances and the current leakage,thus the inferior performances.In this study,an efficient functional interlayer Ba_(0.95)La_(0.05)Fe_(0.8)Zn_(0.2)O_(3-δ)(BLFZ)in-between the anode and the electrolyte is developed.The electrochemical performances of P-SOECs are greatly enhanced because the BLFZ can greatly increase the interface contact,boost anode reaction kinetics,and increase proton injection into electrolyte.As a result,the P-SOEC yields high current density of 0.83 A cm^(-2) at 600℃ in 1.3 Vamong all the reported Zr-rich side cells.This work not only offers an efficient functional interlayer for P-SOECs but also holds the potential to achieve P-SOECs with high performances and long-term stability.
文摘Solid waste management in Freetown has been further complicated in the wake of rapid population growth and urbanization, resulting in considerable pressure to implement effective and sustainable solutions. This study fills the knowledge gap on the recycling infrastructure, solid waste collection processing, sorting and material recovery facilities specific to the Freetown waste management system. The aim of this study is to examine these components in terms of identifying inefficiencies and suggest sustainable practices to eliminate them. The study was guided by a mixed-method approach, which consisted of both quantitative and qualitative methods, and data collection was done through systematic random sampling. The sample of 384 respondents was collected, which includes stakeholders from a range of sectors. The outcome exhibited inefficient waste collection, a lack of formal recycling infrastructure, and suboptimal waste separation at house level, with 65.2% of respondents evidencing not separating their waste and 33% being without access to waste collection services that result in illegal dumping and environmental pollution. The analysis of the solid waste composition shows that a larger share of the waste generated in Freetown is composed of organic material (53% is being organic), which allows for composting programs to be initiated. This research establishes the inevitable requirement for infrastructure upgrading, mounting public awareness, and policy development. By taking into account these sectors, Freetown can become a more environment-friendly waste management system, which would mean a reduction in landfills and much-emphasized resource recovery.
基金supported by National Key R&D Program of China(2021YFB4001401)National Natural Science Foundation of China(52272190,22178023).
文摘Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-phase method as the cathode for CO_(2)electrolysis by SOECs.XRD confirms that SFMSc exhibits a stable cubic phase crystal structure.The experimental results of TPD,TG,EPR,CO_(2)-TPD further demonstrate that Sc-doping increases the concentration of oxygen vacancy in the material and the chemical adsorption capacity of CO_(2)molecules.Electrochemical tests reveal that SFMSc single cell achieves a current density of 2.26 A/cm^(2) and a lower polarization impedance of 0.32Ω·cm^(2) at 800°C under the applied voltage of 1.8 V.And no significant performance attenuation or carbon deposition is observed after 80 h continuous long-term stability test.This study provides a favorable support for the development of SOEC cathode materials with good electro-catalytic performance and stability.
基金supported by National Natural Science Foundation of China(22279018)National Natural Science Foundation of China(22005055)Natural Science Foundation of Fujian Province(2022J01085).
文摘Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.
文摘The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Many scholars have referred to it as a fuzzy multi-attribute or multi-criteria decision-making problem using various fuzzy set-like approaches because of the inclusion of criteria and anticipated ambiguity.The goal of the current study is to use an innovative methodology to address the expected uncertainties in the problem of solid waste site selection.The characteristics(or sub-attributes)that decision-makers select and the degree of approximation they accept for various options can both be indicators of these uncertainties.To tackle these problems,a novel mathematical structure known as the fuzzy parameterized possibility single valued neutrosophic hypersoft expert set(ρˆ-set),which is initially described,is integrated with a modified version of Sanchez’s method.Following this,an intelligent algorithm is suggested.The steps of the suggested algorithm are explained with an example that explains itself.The compatibility of solid waste management sites and systems is discussed,and rankings are established along with detailed justifications for their viability.This study’s strengths lie in its application of fuzzy parameterization and possibility grading to effectively handle the uncertainties embodied in the parameters’nature and alternative approximations,respectively.It uses specific mathematical formulations to compute the fuzzy parameterized degrees and possibility grades that are missing from the prior literature.It is simpler for the decisionmakers to look at each option separately because the decision is uncertain.Comparing the computed results,it is discovered that they are consistent and dependable because of their preferred properties.
文摘Urban areas worldwide face escalating challenges in managing municipal solid waste (MSW) due to rapid urbanization, population growth, and changing consumption patterns. Inefficient waste management systems contribute to environmental degradation, public health risks, and resource depletion, underscoring the need for innovative solutions. This review employing AI-driven sorting technologies in urban waste management as a transformative framework for sustainable MSW management, emphasizing waste reduction, resource recovery, and closed-loop systems. The paper synthesizes existing literature, case studies, and technological advancements to explore strategies for integrating CE principles into MSW management. Key areas of focus include the application of emerging technologies such as artificial intelligence, machine learning, and big data analytics;advancements in waste-to-resource technologies;the development of scalable and adaptable CE models tailored to diverse urban contexts;and fostering collaboration among governments, private sectors, and communities. Findings highlight the potential of CE frameworks to minimize waste generation, enhance resource efficiency, and create resilient urban systems. However, significant barriers remain, including technological, financial, and policy challenges. The review concludes by identifying future research directions and actionable recommendations for stakeholders, aiming to advance the global transition toward sustainable urban waste management.
基金supported by Fundamental Research Funds for the Central Universities(2023KYJD1008)the Science Research Projects of the Anhui Higher Education Institutions of China(2022AH051582).
文摘Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.
文摘Carbon dioxide (CO2) is a substantial contributor to global warming owing to its long atmospheric lifetime and high potential for global warming. It is related to the processes of raw material mining and industry, which is fundamental to economic development but also has negative impacts on the environment, namely the increase of global temperature and solid waste. To address this, various carbon capture, storage, utilization, and mineralization methods have emerged, but they remain at an early stage of development. This review discusses the applicability of solid waste materials, and slurry form in particular, for CO2 mineralization. It analyzes frequently researched materials, carbonation capabilities, reaction mechanisms, and industrial uses. Industrial waste materials, cement, and demolition waste are widely used in carbonation reactions because of their abundance and high Ca/Mg oxide content. The review also discusses carbonation types, including two major types—direct and indirect—which fall under the ex-situ category. The key factors influencing the carbonation efficiency include the CO2 concentration, temperature, pressure, particle size, and reaction chamber type. The construction sector is the principal beneficiary of carbonated materials due to the cementitious characteristics of recarbonated byproducts and precipitated calcium carbonate (PCC). Other industries, such as paper, plastics, and pharmaceuticals, also find applications for PCC. Future research is recommended to explore new materials for slurry carbonation, with potential applications in underground mine support for carbon sequestration and subsidence control.
文摘BACKGROUND Machine learning(ML),a major branch of artificial intelligence,has not only demonstrated the potential to significantly improve numerous sectors of healthcare but has also made significant contributions to the field of solid organ transplantation.ML provides revolutionary opportunities in areas such as donorrecipient matching,post-transplant monitoring,and patient care by automatically analyzing large amounts of data,identifying patterns,and forecasting outcomes.AIM To conduct a comprehensive bibliometric analysis of publications on the use of ML in transplantation to understand current research trends and their implications.METHODS On July 18,a thorough search strategy was used with the Web of Science database.ML and transplantation-related keywords were utilized.With the aid of the VOS viewer application,the identified articles were subjected to bibliometric variable analysis in order to determine publication counts,citation counts,contributing countries,and institutions,among other factors.RESULTS Of the 529 articles that were first identified,427 were deemed relevant for bibliometric analysis.A surge in publications was observed over the last four years,especially after 2018,signifying growing interest in this area.With 209 publications,the United States emerged as the top contributor.Notably,the"Journal of Heart and Lung Transplantation"and the"American Journal of Transplantation"emerged as the leading journals,publishing the highest number of relevant articles.Frequent keyword searches revealed that patient survival,mortality,outcomes,allocation,and risk assessment were significant themes of focus.CONCLUSION The growing body of pertinent publications highlights ML's growing presence in the field of solid organ transplantation.This bibliometric analysis highlights the growing importance of ML in transplant research and highlights its exciting potential to change medical practices and enhance patient outcomes.Encouraging collaboration between significant contributors can potentially fast-track advancements in this interdisciplinary domain.
文摘BACKGROUND In the absence of effective antimicrobials,transplant surgery is not viable,and antirejection immunosuppressants cannot be administered,as resistant infections compromise the life-saving goal of organ transplantation.AIM To evaluate the efficacy of antimicrobials in preventing resistance in solid organ transplant recipients.METHODS A systematic review was conducted using a search methodology consistent with the preferred reporting items for systematic reviews and meta-analyses.This review included randomized clinical trials that evaluated the efficacy of antimicrobial agents(prophylactic or therapeutic)aimed at preventing antimicrobial resistance.The search strategy involved analyzing multiple databases,including PubMed/MEDLINE,Web of Science,Embase,Scopus,and SciELO,as well as examining gray literature sources on Google Scholar.A comprehensive electronic database search was conducted from the databases’inception until May 2024,with no language restrictions.RESULTS After the final phase of the eligibility assessment,this systematic review ultimate-ly included 7 articles.A total of 2318 patients were studied.The most studied microorganisms were cytomegalovirus,although vancomycinresistant enterococci,Clostridioides difficile,and multidrug-resistant Enterobacterales were also analyzed.The antimicrobials used in the interventions were mainly maribavir,valganciclovir,gancic-lovir,and colistin-neomycin.Of concern,all clinical trials showed significant proportions of resistant microorga-nisms after the interventions,with no statistically significant differences between the groups(mean resistance 13.47%vs 14.39%),except for two studies that demonstrated greater efficacy of maribavir and valganciclovir(mean resistance 22.2%vs 41.1%in the control group;P<0.05).The total reported deaths in three clinical trials were 75,and there were 24 graft rejections in two studies.CONCLUSION All clinical trials reported significant proportions of antimicrobial-resistant microorganisms following interventions.More high-quality randomized clinical trials are needed to corroborate these results.
基金Supported in part by the National Key Research and Development Program of China(2021YFC2203001)the Natural Science Foundation of China(12035016,12275275,12275350)+1 种基金supported by the Beijing Natural Science Foundation(1222031)the Innovative Projects of Science and Technology at IHEP。
文摘A white hole is simply a region of spacetime described by general relativity.Black holes are often assumed to form through star collapses.Based on such an assumption,the white hole region does not present.Recent research on quantum gravity indicates that a black hole must convert into a white one to avoid the singularity difficulty encountered in general relativity.If such a theory is true,it is important to ask how white holes can be observed.Anything inside a white hole must be pushed outside.However,if a white hole is empty,nothing will escape from it.We can only observe the interaction behavior between the objects falling outside and the white hole.In this paper,we observe that the structure of the accretion disk around a white hole is exactly the same as the one around a black hole.The only possibility to distinguish a white hole from a black one is the light passing through the white hole.The image properties of white holes for such scenarios are investigated in this paper.Based on our analysis and current observation facts,we cannot certainly determine if M87 and Sgr A*are black or white holes.
文摘Recent developments suggest that the race to power electric vehicles(EV)withsolid-statebatteries(SSB)hasgainedmomentum.In January 2024,Toyota Motor Corporation(Toyota City,Japan)confirmed its previously stated plans to start producing SSB EV in the2027-2028timeframe[1].InMay2024,itemergedthattheChi-nesegovernmentplanstoinvestmorethansixbillionCNY(830mil-lion USD)in projects intended to speed up SSB development[2].In June 2024,the automaker Nio(Shanghai,China)began supplying customers with EVs containing“semi-solid-state”batteries-a hybrid technology that could serve as a stepping stone to fully solid versions[3].In September 2024,SAIC Motor(Shanghai,China),China’s largest automobile manufacturer,announced that it would deliver its first SSB-powered vehicles in 2025[4].
基金the Researchers Supporting Project number(RSPD2025R997),King Saud University,Riyadh,Saudi Arabia.
文摘This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.
基金supported by the Technology Innovation Program(Grant no.20009985,Grant no.20026752)funded By the Ministry of Trade,Industry&Energy(MOTIE,Korea)。
文摘All-solid-state batteries(ASSBs)are pursued due to their potential for better safety and high energy density.However,the energy density of the cathode for ASSBs does not seem to be satisfactory due to the low utilization of active materials(AMs)at high loading.With small amount of solid electrolyte(SE)powder in the cathode,poor electrochemical performance is often observed due to contact loss and non-homogeneous distribution of AMs and SEs,leading to high tortuosity and limitation of lithium and electron transport pathways.Here,we propose a novel cathode design that can achieve high volumetric energy density of 1258 Wh L^(-1)at high AM content of 85 wt%by synergizing the merits of AM@SE core–shell composite particles with conformally coated thin SE shell prepared from mechanofusion process and small SE particles.The core–shell structure with an intimate and thin SE shell guarantees high ionic conduction pathway while unharming the electronic conduction.In addition,small SE particles play the role of a filler that reduces the packing porosity in the cathode composite electrode as well as between the cathode and the SE separator layer.The systematic demonstration of the optimization process may provide understanding and guidance on the design of electrodes for ASSBs with high electrode density,capacity,and ultimately energy density.
基金the National Key R&D Program of China(No.2023YFC3009501)the National Natural Science Foundation of China(No.52374298)+1 种基金the project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology,No.QNKT23-17)Aeronautical Science Foundation of China(No.20174072003).
文摘Garnet Li_(7)La_(3)Zr_(2)O_(12)(LLZO)electrolytes have been recognized as a promising candidate to replace liquid/molten-state electrolytes in battery applications due to their exceptional performance,particularly Ga-doped LLZO(LLZGO),which exhibits high ionic conductivity.However,the limited size of the Liþtransport bottleneck restricts its high-current discharging performance.The present study focuses on the synthesis of Ga^(3+)þand Ba^(2+)þco-doped LLZO(LLZGBO)and investigates the influence of doping contents on the morphology,crystal structure,Liþtransport bottleneck size,and ionic conductivity.In particular,Ga_(0.32)Ba_(0.15)exhibits the highest ionic conductivity(6.11E-2 S cm^(-1) at 550 C)in comparison with other compositions,which can be attributed to its higher-energy morphology,larger bottleneck and unique Liþtransport channel.In addition to Ba^(2+),Sr^(2+)þand Ca^(2+)have been co-doped with Ga3þinto LLZO,respectively,to study the effect of doping ion radius on crystal structures and the properties of electrolytes.The characterization results demonstrate that the easier Liþtransport and higher ionic conductivity can be obtained when the electrolyte is doped with larger-radius ions.As a result,the assembled thermal battery with Ga_(0.32)Ba_(0.15)-LLZO electrolyte exhibits a remarkable voltage platform of 1.81 V and a high specific capacity of 455.65 mA h g^(-1) at an elevated temperature of 525℃.The discharge specific capacity of the thermal cell at 500 mA amounts to 63%of that at 100 mA,showcasing exceptional high-current discharging performance.When assembled as prototypes with fourteen single cells connected in series,the thermal batteries deliver an activation time of 38 ms and a discharge time of 32 s with the current density of 100 mA cm^(-2).These findings suggest that Ga,Ba co-doped LLZO solid-state electrolytes with high ionic conductivities holds great potential for high-capacity,quick-initiating and high-current discharging thermal batteries.
基金supported by the National Natural Science Foundation of China(Nos.22205017,22090043)the Guangxi Natural Science Foundation,China(No.2019GXNSFGA245006)the Guilin University of Technology Research Startup Project,China(No.RD2400002912).
文摘Sodium-ion conducting materials in sodium-ion battery have drawn widespread attention in energy storage technologies due to the advantages of low cost,high performance,and efficient environmental adaptability.Herein,bond valence site energy(BVSE)calculations were used to predict the sodium ion electrical performances by the Na nonstoichiometric modifications,and we have carried out fine experiments to modulate the sodium ion conductivity of Na_(x)Zn_(2)TeO_(6) guided by BVSE calculations.The optimized composition Na_(2.1)Zn_(2)TeO_(6) shows the superior sodium ionic conductivity of 5.3×10^(−3) S/cm at 190℃,with a low activation energy of 0.28 eV.The excess Na preferentially occupies the Na1 site with tetrahedral voids,which has a higher capacity for sodium ion migration,as revealed by the combined neutron powder diffraction technique with the 1D and 2D ^(23)Na solid-state NMR technique,which is responsible for the variations in sodium ion conductivity.In addition,it is worth noting that the resulting Na_(2.1)Zn_(2)TeO_(6) material maintains superior thermal and phase stability,as well as approximately the same thermal expansion coefficient values even during the temperature rise and fall cycles in the temperature range of 25–800°C.Furthermore,molecular dynamics simulations revealed that the sodium ions exhibit longrange anisotropic migration within the Na+interlayers of Na_(2.1)Zn_(2)TeO_(6).
