InP-based photonics integration is becoming a competi- tive candidate for realizing optical modules with enhanced functionality at a reduced cost, especially in optical com- munication systems, since the proposal of w...InP-based photonics integration is becoming a competi- tive candidate for realizing optical modules with enhanced functionality at a reduced cost, especially in optical com- munication systems, since the proposal of wavelength division multiplexing （WDM）. In recent years, network traffic has raised demands for high capacity, high speed transmission systems.展开更多
A short overview of integrated waveguide demultiplexers for different applications in future highly integrated optical communication systems is presented. Some fabricated devices based on amorphous silicon nanowire te...A short overview of integrated waveguide demultiplexers for different applications in future highly integrated optical communication systems is presented. Some fabricated devices based on amorphous silicon nanowire technology are described.展开更多
This paper proves that a synchronous demultiplexer has the same logic function as a synchronous multiplexer. A new approach is proposed to implement synchronous demultiplexers in high-speed ISDN switching networks. A ...This paper proves that a synchronous demultiplexer has the same logic function as a synchronous multiplexer. A new approach is proposed to implement synchronous demultiplexers in high-speed ISDN switching networks. A synchronous demultiplexer is designed utilizing the same structure as a synchronous shuffle multiplexer. Both the theoretical analysis and experimental results show that for the same capacity, the new method is more tolerant of signal delay variation, so a very high-speed synchronous demultiplexer can be designed with the larger capacity required in large capacity synchronous switching networks.展开更多
A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency div...A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency divided 625MHz clock has a phase noise of -106.26dBc/Hz at 100kHz offset in response to a 2.5Gb/s PRBS input data （2^31-1）. The 2.5Gb/s PRBS data are demultiplexed to four 625Mb/s data. The 0.97mm× 0.97mm IC consumes 550mW under a single 3.3V power supply （not including output buffers）.展开更多
A 1 ：2 demultiplexer is designed and realized in standard 0. 18μm CMOS technology. A novel high-speed and low-voltage latch is used to realize the core circuit cell. Compared to the traditional source-coupled FET lo...A 1 ：2 demultiplexer is designed and realized in standard 0. 18μm CMOS technology. A novel high-speed and low-voltage latch is used to realize the core circuit cell. Compared to the traditional source-coupled FET logic structure latch, its power supply voltage is lower and the speed is faster. In addition, the negative feedback is used in the buffer circuit to widen its bandwidth. Measurement results show that the chip can work at the data rate of 20Gb/ s. The supply voltage is 1.8V and the current,including the buffer circuit, is 72mA.展开更多
A compact and fabrication friendly polarization demultiplexer(P-DEMUX) is proposed and characterized to enable wavelength-division-multiplexing and polarization-division-multiplexing simultaneously. The proposed struc...A compact and fabrication friendly polarization demultiplexer(P-DEMUX) is proposed and characterized to enable wavelength-division-multiplexing and polarization-division-multiplexing simultaneously. The proposed structure is composed of a polarization-selective microring resonator in ultrathin waveguide and two bus channels in the silicon nitridesilica-silicon horizontal slot waveguides. In the slot waveguide, the transverse electric(TE) mode propagates through the silicon layer, while the transverse magnetic(TM) mode is confined in the slot region. In the designed ultra-thin waveguide, the TM mode is cut-off. The effective indexes of the TE modes for ultrathin and slot waveguides have comparable values. Thanks for these distinguishing features, the input TE mode can be efficiently filtered through the ultra-thin microring at the resonant wavelength, while the TM mode can directly output from the through port. Simulation results show that the extinction ratio of the proposed P-DEMUX for TE and TM modes are 33.21 dB and 24.97 dB, and the insertion losses are 0.346 dB and 0.324 dB, respectively, at the wavelength of 1551.64 nm. Furthermore, the device shows a broad bandwidth(> 100 nm) for an extinction ratio(ER) of > 20 dB. In addition, the proposed P-DEMUX also has a good fabrication tolerance for the waveguide width variation of-20 nm≤ △w_(g)≤ 20 nm and the microring width variation of -20 nm≤ △w_(r) ≤20 nm for a low insertion loss of < 0.75 dB and low ER of <-18 dB.展开更多
Fiber optic Mach Zehnder interferometer(MZI) can be used as wavelength multiplexers and demultiplexers. The △ L and △ directly influence the properties of MZI. To lengthen the △ L can demultiplex much more wavelen...Fiber optic Mach Zehnder interferometer(MZI) can be used as wavelength multiplexers and demultiplexers. The △ L and △ directly influence the properties of MZI. To lengthen the △ L can demultiplex much more wavelengths, but when the △ L is longer, the temperature will influence MZI more seriously. A method to solve this problem is proposed, which enables MZI to work stably. The wavelength distance is 0.8 nm, and the extinction ratio is high.展开更多
A 10 Gbit/s 1：4 demultiplexer（DEMUX） fabricated in 0. 18 μm CMOS （complementary metal-oxidesemiconductor transistor） technology for optical-fiber-link is presented. The system is constructed in tree-type structu...A 10 Gbit/s 1：4 demultiplexer（DEMUX） fabricated in 0. 18 μm CMOS （complementary metal-oxidesemiconductor transistor） technology for optical-fiber-link is presented. The system is constructed in tree-type structure and it includes a high-speed 1 ： 2 DEMUX, two low-speed 1 ： 2 DEMUXs, a divider, and input and output buffers for data and dock. To improve the circuit performance and reduce the power consumption, a latch structure with a common-gate topology and a single clock phase is employed in the high-speed 1 ： 2 DEMUX and the 5 GHz 1 ： 2 on-chip frequency divider, while dynamic CMOS logic is adopted in the low-speed l ： 2 DEMUXs. Measured results at 10 Gbit/s by 23^31 -1 pseudo random bit sequences （PRBS） via on-wafer testing indicate that it can work well with a power dissipation of less than 100 mW at 1.8 V supply voltage. The die area of the DEMUX is 0. 65 mm × 0. 75 mm.展开更多
A low power 12Gb/s single-stage 1 ： 4 demultiplexer （DEMUX） applied in SONET OC-192 is realized in TSMC＇s mix-signal 0. 25μm CMOS. All of the circuits are in source coupled FET logic （SCFL） to achieve as high a...A low power 12Gb/s single-stage 1 ： 4 demultiplexer （DEMUX） applied in SONET OC-192 is realized in TSMC＇s mix-signal 0. 25μm CMOS. All of the circuits are in source coupled FET logic （SCFL） to achieve as high a speed as possible and suppress common mode distortions. This DEMUX is featured for achieving singlestage demultiplexing by using a quarter-rate IQ clock. This method not only reduces the components of the DEMUX but also lowers its power dissipation. The fabricated DEMUX operates error free at 12Gb/s by 231 - 1 pseudorandom bit sequences in on-wafer testing. The chip size is 0. 9mm × 0.9mm and the power dissipation is only 210mW with a single 2.5V supply.展开更多
A 1 ： 2 demultiplexer（DEMUX） that is fabricated using 0. 18 μm CMOS （complementary metaloxide-semiconductor transistor） technology is presented. The DEMUX consists of a master-slave-slave, masterslave D flip-flo...A 1 ： 2 demultiplexer（DEMUX） that is fabricated using 0. 18 μm CMOS （complementary metaloxide-semiconductor transistor） technology is presented. The DEMUX consists of a master-slave-slave, masterslave D flip-flops and output buffers. The D flip-flop employs a dynamic-loading structure and common-gate topology with single clock phase for the bias transistors. The dynamic-loading structure can make the circuit work faster because it decreases the charge/discharge time of the output node, and it consumes lower power because its working current is in a switch mode. In addition, the positive feedback loop, which is made up of a cross-coupled transistor pair in the latch, speeds up the circuit. Measurement results at 20 Gbit/s 2^23 - 1 pseudo random bit sequence （PRBS） via on-wafer testing show that the 1： 2 DEMUX can operate well. The power dissipation is 108 mW with the area of 475μm×578μm.展开更多
A 10 Gbit/s (STM-64, OC-192) 1:4 demultiplexer (DEMUX) with 4-phase clock wasachieved in TSMC's standard 0.25 μm complementary metal-oxide-semiconductor (CMOS) technique. Allof the circuits are in source coupled ...A 10 Gbit/s (STM-64, OC-192) 1:4 demultiplexer (DEMUX) with 4-phase clock wasachieved in TSMC's standard 0.25 μm complementary metal-oxide-semiconductor (CMOS) technique. Allof the circuits are in source coupled FET logic (SCFL) to achieve as high as possible speed andsuppress common mode distortions. This DEMUX is featured by constant-delay buffers to generate a4-phase clock and adjust skews of the four channel outputs. The fabricated DEMUX operates error freeat 10 Gbit/s by 2^(31) -1 pseudorandom bit sequences (PRBS) via on-wafer testing. The measured rootmean square (rms) jitter, rising and failing edge of the eye-diagram are 11, 123 and 137 ps,respectively. The chip size is 0.9 mm x 1.2 mm and the power dissipation is 550 mW with a 3. 3 Vsupply.展开更多
Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analyse...Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.展开更多
Miniaturized spectrometers have been widely researched in recent years,but few studies are conducted with on-chip multimode schemes for mode-division multiplexing(MDM)systems.Here we propose an ultracompact mode-divis...Miniaturized spectrometers have been widely researched in recent years,but few studies are conducted with on-chip multimode schemes for mode-division multiplexing(MDM)systems.Here we propose an ultracompact mode-division demultiplexing spectrometer that includes branched waveguide structures and graphene-based photodetectors,which realizes simultaneously spectral dispersing and light fields detecting.In the bandwidth of 1500-1600 nm,the designed spectrometer achieves the single-mode spectral resolution of 7 nm for each mode of TE_(1)-TE_(4) by Tikhonov regularization optimization.Empowered by deep learning algorithms,the 15-nm resolution of parallel reconstruction for TE_(1)-TE_(4) is achieved by a single-shot measurement.Moreover,by stacking the multimode response in TE_(1)-TE_(4) to the single spectra,the 3-nm spectral resolution is realized.This design reveals an effective solution for on-chip MDM spectroscopy,and may find applications in multimode sensing,interconnecting and processing.展开更多
A compact arrayed-waveguide grating （AWG） on the silicon-on-insulator material is designed and fabricated with employment of waveguide-integrated turning mirrors （WITMs）. By properly setting the incident angle wit...A compact arrayed-waveguide grating （AWG） on the silicon-on-insulator material is designed and fabricated with employment of waveguide-integrated turning mirrors （WITMs）. By properly setting the incident angle with the value of 45°, the effective area of the WITM AWG is only 1.15 cm×1.15 cm with the arrayed waveguide area of 0.6cm×0.6cm. The crosstalk of the fabricated 1×6 AWG is better than -19 dB. The on-chip insertion loss is about -8.8 dB and the output nonuniformity is less than 0.6 dB. The polarization-dependent central wavelength shift is about 0.048nm and the polarization dependent loss is neglectable.展开更多
We propose the concept of thermal demultiplexer, which can split the heat flux in different frequency ranges intodifferent directions. We demonstrate this device concept in a honeycomb lattice with dangling atoms. Fro...We propose the concept of thermal demultiplexer, which can split the heat flux in different frequency ranges intodifferent directions. We demonstrate this device concept in a honeycomb lattice with dangling atoms. From the view ofeffective negative mass, we give a qualitative explanation of how the dangling atoms change the original transport property.We first design a two-mass configuration thermal demultiplexer, and find that the heat flux can flow into different ports incorresponding frequency ranges roughly. Then, to improve the performance, we choose the suitable masses of danglingatoms and optimize the four-mass configuration with genetic algorithm. Finally, we give out the optimal configuration witha remarkable effect. Our study finds a way to selectively split spectrum-resolved heat to different ports as phonon splitter,which would provide a new means to manipulate phonons and heat, and to guide the design of phononic thermal devices inthe future.展开更多
We investigate the electronic transport in a simple mesoscopic cross structure made of two wires(stubs)grafted at the same point along a quantum waveguide.We show that the structure may exhibit important phenomena suc...We investigate the electronic transport in a simple mesoscopic cross structure made of two wires(stubs)grafted at the same point along a quantum waveguide.We show that the structure may exhibit important phenomena such as bound in continuum(BIC)states.These states are transformed into electromagnetically induced transparency(EIT)resonance by detuning slightly the lengths of the stubs.The last phenomenon is used to propose and study a mesoscopic demultiplexer device with an input waveguide and two output waveguides.We give closed-form expressions of the geometrical parameters that allow a selective transfer of a given state in the first waveguide without perturbing the second waveguide.The effect of temperature on the transmission resonances is also examined by using Landauer-Büttiker formula.The analytical results of the dispersion relation and transmission and reflection coefficient are obtained using the Green's function method.展开更多
Wavelength demultiplexing waveguide couplers have important applications in integrated nanophotonic devices. Two of the most important indicators of the quality of a wavelength demultiplexing coupler are coupling effi...Wavelength demultiplexing waveguide couplers have important applications in integrated nanophotonic devices. Two of the most important indicators of the quality of a wavelength demultiplexing coupler are coupling efficiency and splitting ratio. In this study, we utilize two asymmetric high-index dielectric nanoantennas directly positioned on top of a silicon-on insulator waveguide to realize a compact wavelength demultiplexing coupler in a communication band, which is based on the interference of the waveguide modes coupled by the two nanoantennas. We add a Au substrate for further increasing the coupling efficiency. This has constructive and destructive influences on the antenna＇s in-coupling efficiency owing to the Fabry-Perot（FP） resonance in the SiO2 layer. Therefore, we can realize a wavelength demultiplexing coupler with compact size and high coupling efficiency. This coupler has widespread applications in the areas of wavelength filters,on-chip signal processing, and integrated nanophotonic circuits.展开更多
An 8×2.5Gb/s 100km optical time division multiplexing(OTDM) experiment system is reported, which employs an electrical filter with high Q value for clock extraction, a nonlinear optical loop mirror(NOLM) for demu...An 8×2.5Gb/s 100km optical time division multiplexing(OTDM) experiment system is reported, which employs an electrical filter with high Q value for clock extraction, a nonlinear optical loop mirror(NOLM) for demultiplering and chirped fiber grating for dispersion compensation. The error free operation is achieved and the experiment results are given.展开更多
As the combining form of the orthogonal frequency-division multiplexing (OFDM) technique and the vertical Bell Labs layered space-time (V-BLAST) architecture, the V-BLAST OFDM system can better meet the demand of next...As the combining form of the orthogonal frequency-division multiplexing (OFDM) technique and the vertical Bell Labs layered space-time (V-BLAST) architecture, the V-BLAST OFDM system can better meet the demand of next-generation (NextG) broadband mobile wireless multimedia communications. The symbols detection problem of the V-BLAST OFDM system is investigated under the frequency-selective fading environment. The joint space-frequency demultiplexing operation is proposed in the V-BLAST OFDM system. Successively, one novel half-rate rotational invariance joint space-frequency coding scheme for the V-BLAST OFDM system is proposed. By elegantly exploiting the above rotational invariance property, we derive one direct symbols detection scheme without knowing channels state information (CSI) for the frequency-selective V-BLAST OFDM system. Extensive simulation results demonstrate the validity of the novel half-rate rotational invariance joint space-frequency coding scheme and the performance of the direct symbols detection scheme.展开更多
基金supported by the National High-Tech Research and Development Program of China(No.2015AA016902)the National Natural Science Foundation of China(Nos.61635010,61674136,and 61435002)
文摘InP-based photonics integration is becoming a competi- tive candidate for realizing optical modules with enhanced functionality at a reduced cost, especially in optical com- munication systems, since the proposal of wavelength division multiplexing （WDM）. In recent years, network traffic has raised demands for high capacity, high speed transmission systems.
文摘A short overview of integrated waveguide demultiplexers for different applications in future highly integrated optical communication systems is presented. Some fabricated devices based on amorphous silicon nanowire technology are described.
文摘This paper proves that a synchronous demultiplexer has the same logic function as a synchronous multiplexer. A new approach is proposed to implement synchronous demultiplexers in high-speed ISDN switching networks. A synchronous demultiplexer is designed utilizing the same structure as a synchronous shuffle multiplexer. Both the theoretical analysis and experimental results show that for the same capacity, the new method is more tolerant of signal delay variation, so a very high-speed synchronous demultiplexer can be designed with the larger capacity required in large capacity synchronous switching networks.
文摘A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency divided 625MHz clock has a phase noise of -106.26dBc/Hz at 100kHz offset in response to a 2.5Gb/s PRBS input data （2^31-1）. The 2.5Gb/s PRBS data are demultiplexed to four 625Mb/s data. The 0.97mm× 0.97mm IC consumes 550mW under a single 3.3V power supply （not including output buffers）.
文摘A 1 ：2 demultiplexer is designed and realized in standard 0. 18μm CMOS technology. A novel high-speed and low-voltage latch is used to realize the core circuit cell. Compared to the traditional source-coupled FET logic structure latch, its power supply voltage is lower and the speed is faster. In addition, the negative feedback is used in the buffer circuit to widen its bandwidth. Measurement results show that the chip can work at the data rate of 20Gb/ s. The supply voltage is 1.8V and the current,including the buffer circuit, is 72mA.
基金Project is supported by the National Natural Science Foundation of China (Grant No. 61804148)the National Key Research and Development Program of China (Grant No. 2018YFB2200202)。
文摘A compact and fabrication friendly polarization demultiplexer(P-DEMUX) is proposed and characterized to enable wavelength-division-multiplexing and polarization-division-multiplexing simultaneously. The proposed structure is composed of a polarization-selective microring resonator in ultrathin waveguide and two bus channels in the silicon nitridesilica-silicon horizontal slot waveguides. In the slot waveguide, the transverse electric(TE) mode propagates through the silicon layer, while the transverse magnetic(TM) mode is confined in the slot region. In the designed ultra-thin waveguide, the TM mode is cut-off. The effective indexes of the TE modes for ultrathin and slot waveguides have comparable values. Thanks for these distinguishing features, the input TE mode can be efficiently filtered through the ultra-thin microring at the resonant wavelength, while the TM mode can directly output from the through port. Simulation results show that the extinction ratio of the proposed P-DEMUX for TE and TM modes are 33.21 dB and 24.97 dB, and the insertion losses are 0.346 dB and 0.324 dB, respectively, at the wavelength of 1551.64 nm. Furthermore, the device shows a broad bandwidth(> 100 nm) for an extinction ratio(ER) of > 20 dB. In addition, the proposed P-DEMUX also has a good fabrication tolerance for the waveguide width variation of-20 nm≤ △w_(g)≤ 20 nm and the microring width variation of -20 nm≤ △w_(r) ≤20 nm for a low insertion loss of < 0.75 dB and low ER of <-18 dB.
文摘Fiber optic Mach Zehnder interferometer(MZI) can be used as wavelength multiplexers and demultiplexers. The △ L and △ directly influence the properties of MZI. To lengthen the △ L can demultiplex much more wavelengths, but when the △ L is longer, the temperature will influence MZI more seriously. A method to solve this problem is proposed, which enables MZI to work stably. The wavelength distance is 0.8 nm, and the extinction ratio is high.
基金The National High Technology Research and Devel-opment Program of China (863Program) (No.2001AA312010).
文摘A 10 Gbit/s 1：4 demultiplexer（DEMUX） fabricated in 0. 18 μm CMOS （complementary metal-oxidesemiconductor transistor） technology for optical-fiber-link is presented. The system is constructed in tree-type structure and it includes a high-speed 1 ： 2 DEMUX, two low-speed 1 ： 2 DEMUXs, a divider, and input and output buffers for data and dock. To improve the circuit performance and reduce the power consumption, a latch structure with a common-gate topology and a single clock phase is employed in the high-speed 1 ： 2 DEMUX and the 5 GHz 1 ： 2 on-chip frequency divider, while dynamic CMOS logic is adopted in the low-speed l ： 2 DEMUXs. Measured results at 10 Gbit/s by 23^31 -1 pseudo random bit sequences （PRBS） via on-wafer testing indicate that it can work well with a power dissipation of less than 100 mW at 1.8 V supply voltage. The die area of the DEMUX is 0. 65 mm × 0. 75 mm.
文摘A low power 12Gb/s single-stage 1 ： 4 demultiplexer （DEMUX） applied in SONET OC-192 is realized in TSMC＇s mix-signal 0. 25μm CMOS. All of the circuits are in source coupled FET logic （SCFL） to achieve as high a speed as possible and suppress common mode distortions. This DEMUX is featured for achieving singlestage demultiplexing by using a quarter-rate IQ clock. This method not only reduces the components of the DEMUX but also lowers its power dissipation. The fabricated DEMUX operates error free at 12Gb/s by 231 - 1 pseudorandom bit sequences in on-wafer testing. The chip size is 0. 9mm × 0.9mm and the power dissipation is only 210mW with a single 2.5V supply.
文摘A 1 ： 2 demultiplexer（DEMUX） that is fabricated using 0. 18 μm CMOS （complementary metaloxide-semiconductor transistor） technology is presented. The DEMUX consists of a master-slave-slave, masterslave D flip-flops and output buffers. The D flip-flop employs a dynamic-loading structure and common-gate topology with single clock phase for the bias transistors. The dynamic-loading structure can make the circuit work faster because it decreases the charge/discharge time of the output node, and it consumes lower power because its working current is in a switch mode. In addition, the positive feedback loop, which is made up of a cross-coupled transistor pair in the latch, speeds up the circuit. Measurement results at 20 Gbit/s 2^23 - 1 pseudo random bit sequence （PRBS） via on-wafer testing show that the 1： 2 DEMUX can operate well. The power dissipation is 108 mW with the area of 475μm×578μm.
文摘A 10 Gbit/s (STM-64, OC-192) 1:4 demultiplexer (DEMUX) with 4-phase clock wasachieved in TSMC's standard 0.25 μm complementary metal-oxide-semiconductor (CMOS) technique. Allof the circuits are in source coupled FET logic (SCFL) to achieve as high as possible speed andsuppress common mode distortions. This DEMUX is featured by constant-delay buffers to generate a4-phase clock and adjust skews of the four channel outputs. The fabricated DEMUX operates error freeat 10 Gbit/s by 2^(31) -1 pseudorandom bit sequences (PRBS) via on-wafer testing. The measured rootmean square (rms) jitter, rising and failing edge of the eye-diagram are 11, 123 and 137 ps,respectively. The chip size is 0.9 mm x 1.2 mm and the power dissipation is 550 mW with a 3. 3 Vsupply.
文摘Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.
基金supported by the National Natural Science Foundation of China(Grants No.62005231)Fundamental Research Funds for the Central Universities(20720210045,20720200074)Guangdong Basic and Applied Basic Research Foundation(2021A1515012199).
文摘Miniaturized spectrometers have been widely researched in recent years,but few studies are conducted with on-chip multimode schemes for mode-division multiplexing(MDM)systems.Here we propose an ultracompact mode-division demultiplexing spectrometer that includes branched waveguide structures and graphene-based photodetectors,which realizes simultaneously spectral dispersing and light fields detecting.In the bandwidth of 1500-1600 nm,the designed spectrometer achieves the single-mode spectral resolution of 7 nm for each mode of TE_(1)-TE_(4) by Tikhonov regularization optimization.Empowered by deep learning algorithms,the 15-nm resolution of parallel reconstruction for TE_(1)-TE_(4) is achieved by a single-shot measurement.Moreover,by stacking the multimode response in TE_(1)-TE_(4) to the single spectra,the 3-nm spectral resolution is realized.This design reveals an effective solution for on-chip MDM spectroscopy,and may find applications in multimode sensing,interconnecting and processing.
基金Sponsored by the National Natural Science Foundation of China under Grant Nos 60377030 and 60436020, the Scientific Research Foundation for the Returned 0verseas Chinese Scholars, the Shanghai Applied Material R＆D Fund under Grant No 0417, and the Key Project of the Ministry of Education of China.
文摘A compact arrayed-waveguide grating （AWG） on the silicon-on-insulator material is designed and fabricated with employment of waveguide-integrated turning mirrors （WITMs）. By properly setting the incident angle with the value of 45°, the effective area of the WITM AWG is only 1.15 cm×1.15 cm with the arrayed waveguide area of 0.6cm×0.6cm. The crosstalk of the fabricated 1×6 AWG is better than -19 dB. The on-chip insertion loss is about -8.8 dB and the output nonuniformity is less than 0.6 dB. The polarization-dependent central wavelength shift is about 0.048nm and the polarization dependent loss is neglectable.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11935010 and 11775159)the Shanghai Science and Technology Committee,China(Grant Nos.18ZR1442800 and 18JC1410900)the Opening Project of Shanghai Key Laboratory of Special Artificial Microstructure Materials and Technology.
文摘We propose the concept of thermal demultiplexer, which can split the heat flux in different frequency ranges intodifferent directions. We demonstrate this device concept in a honeycomb lattice with dangling atoms. From the view ofeffective negative mass, we give a qualitative explanation of how the dangling atoms change the original transport property.We first design a two-mass configuration thermal demultiplexer, and find that the heat flux can flow into different ports incorresponding frequency ranges roughly. Then, to improve the performance, we choose the suitable masses of danglingatoms and optimize the four-mass configuration with genetic algorithm. Finally, we give out the optimal configuration witha remarkable effect. Our study finds a way to selectively split spectrum-resolved heat to different ports as phonon splitter,which would provide a new means to manipulate phonons and heat, and to guide the design of phononic thermal devices inthe future.
文摘We investigate the electronic transport in a simple mesoscopic cross structure made of two wires(stubs)grafted at the same point along a quantum waveguide.We show that the structure may exhibit important phenomena such as bound in continuum(BIC)states.These states are transformed into electromagnetically induced transparency(EIT)resonance by detuning slightly the lengths of the stubs.The last phenomenon is used to propose and study a mesoscopic demultiplexer device with an input waveguide and two output waveguides.We give closed-form expressions of the geometrical parameters that allow a selective transfer of a given state in the first waveguide without perturbing the second waveguide.The effect of temperature on the transmission resonances is also examined by using Landauer-Büttiker formula.The analytical results of the dispersion relation and transmission and reflection coefficient are obtained using the Green's function method.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2017YFA0205700 and 2015CB932403)the National Natural Science Foundation of China(Grant Nos.11174062,51472057,and 21790364)
文摘Wavelength demultiplexing waveguide couplers have important applications in integrated nanophotonic devices. Two of the most important indicators of the quality of a wavelength demultiplexing coupler are coupling efficiency and splitting ratio. In this study, we utilize two asymmetric high-index dielectric nanoantennas directly positioned on top of a silicon-on insulator waveguide to realize a compact wavelength demultiplexing coupler in a communication band, which is based on the interference of the waveguide modes coupled by the two nanoantennas. We add a Au substrate for further increasing the coupling efficiency. This has constructive and destructive influences on the antenna＇s in-coupling efficiency owing to the Fabry-Perot（FP） resonance in the SiO2 layer. Therefore, we can realize a wavelength demultiplexing coupler with compact size and high coupling efficiency. This coupler has widespread applications in the areas of wavelength filters,on-chip signal processing, and integrated nanophotonic circuits.
文摘An 8×2.5Gb/s 100km optical time division multiplexing(OTDM) experiment system is reported, which employs an electrical filter with high Q value for clock extraction, a nonlinear optical loop mirror(NOLM) for demultiplering and chirped fiber grating for dispersion compensation. The error free operation is achieved and the experiment results are given.
文摘As the combining form of the orthogonal frequency-division multiplexing (OFDM) technique and the vertical Bell Labs layered space-time (V-BLAST) architecture, the V-BLAST OFDM system can better meet the demand of next-generation (NextG) broadband mobile wireless multimedia communications. The symbols detection problem of the V-BLAST OFDM system is investigated under the frequency-selective fading environment. The joint space-frequency demultiplexing operation is proposed in the V-BLAST OFDM system. Successively, one novel half-rate rotational invariance joint space-frequency coding scheme for the V-BLAST OFDM system is proposed. By elegantly exploiting the above rotational invariance property, we derive one direct symbols detection scheme without knowing channels state information (CSI) for the frequency-selective V-BLAST OFDM system. Extensive simulation results demonstrate the validity of the novel half-rate rotational invariance joint space-frequency coding scheme and the performance of the direct symbols detection scheme.
